@@ -31,7 +31,6 @@
#include <linux/spinlock.h>
#include <linux/skbuff.h>
#include <linux/of.h>
-#include <linux/of_mdio.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
@@ -312,60 +311,6 @@ static int realtek_smi_read(void *ctx, u32 reg, u32 *val)
return realtek_smi_read_reg(priv, reg, val);
}
-static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum)
-{
- struct realtek_priv *priv = bus->priv;
-
- return priv->ops->phy_read(priv, addr, regnum);
-}
-
-static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum,
- u16 val)
-{
- struct realtek_priv *priv = bus->priv;
-
- return priv->ops->phy_write(priv, addr, regnum, val);
-}
-
-static int realtek_smi_setup_mdio(struct dsa_switch *ds)
-{
- struct realtek_priv *priv = ds->priv;
- struct device_node *mdio_np;
- int ret = 0;
-
- mdio_np = of_get_child_by_name(priv->dev->of_node, "mdio");
- if (!mdio_np) {
- dev_err(priv->dev, "no MDIO bus node\n");
- return -ENODEV;
- }
-
- priv->user_mii_bus = devm_mdiobus_alloc(priv->dev);
- if (!priv->user_mii_bus) {
- ret = -ENOMEM;
- goto err_put_node;
- }
-
- priv->user_mii_bus->priv = priv;
- priv->user_mii_bus->name = "SMI user MII";
- priv->user_mii_bus->read = realtek_smi_mdio_read;
- priv->user_mii_bus->write = realtek_smi_mdio_write;
- snprintf(priv->user_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d",
- ds->index);
- priv->user_mii_bus->parent = priv->dev;
-
- ret = devm_of_mdiobus_register(priv->dev, priv->user_mii_bus, mdio_np);
- if (ret) {
- dev_err(priv->dev, "unable to register MDIO bus %s\n",
- priv->user_mii_bus->id);
- goto err_put_node;
- }
-
-err_put_node:
- of_node_put(mdio_np);
-
- return ret;
-}
-
static const struct realtek_interface_info realtek_smi_info = {
.reg_read = realtek_smi_read,
.reg_write = realtek_smi_write,
@@ -404,7 +349,7 @@ int realtek_smi_probe(struct platform_device *pdev)
return PTR_ERR(priv->mdio);
priv->write_reg_noack = realtek_smi_write_reg_noack;
- priv->setup_interface = realtek_smi_setup_mdio;
+ priv->setup_interface = rtl83xx_setup_user_mdio;
priv->ds_ops = priv->variant->ds_ops_smi;
ret = rtl83xx_register_switch(priv);
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
#include <linux/module.h>
+#include <linux/of_mdio.h>
#include "realtek.h"
#include "rtl83xx.h"
@@ -42,6 +43,72 @@ void rtl83xx_unlock(void *ctx)
}
EXPORT_SYMBOL_NS_GPL(rtl83xx_unlock, REALTEK_DSA);
+static int rtl83xx_user_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+ struct realtek_priv *priv = bus->priv;
+
+ return priv->ops->phy_read(priv, addr, regnum);
+}
+
+static int rtl83xx_user_mdio_write(struct mii_bus *bus, int addr, int regnum,
+ u16 val)
+{
+ struct realtek_priv *priv = bus->priv;
+
+ return priv->ops->phy_write(priv, addr, regnum, val);
+}
+
+/**
+ * rtl83xx_setup_user_mdio() - register the user mii bus driver
+ * @ds: DSA switch associated with this user_mii_bus
+ *
+ * This function first gets and mdio node under the dev OF node, aborting
+ * if missing. That mdio node describing an mdio bus is used to register a
+ * new mdio bus.
+ *
+ * Context: Any context.
+ * Return: 0 on success, negative value for failure.
+ */
+int rtl83xx_setup_user_mdio(struct dsa_switch *ds)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct device_node *mdio_np;
+ int ret = 0;
+
+ mdio_np = of_get_child_by_name(priv->dev->of_node, "mdio");
+ if (!mdio_np) {
+ dev_err(priv->dev, "no MDIO bus node\n");
+ return -ENODEV;
+ }
+
+ priv->user_mii_bus = devm_mdiobus_alloc(priv->dev);
+ if (!priv->user_mii_bus) {
+ ret = -ENOMEM;
+ goto err_put_node;
+ }
+
+ priv->user_mii_bus->priv = priv;
+ priv->user_mii_bus->name = "Realtek user MII";
+ priv->user_mii_bus->read = rtl83xx_user_mdio_read;
+ priv->user_mii_bus->write = rtl83xx_user_mdio_write;
+ snprintf(priv->user_mii_bus->id, MII_BUS_ID_SIZE, "Realtek-%d",
+ ds->index);
+ priv->user_mii_bus->parent = priv->dev;
+
+ ret = devm_of_mdiobus_register(priv->dev, priv->user_mii_bus, mdio_np);
+ if (ret) {
+ dev_err(priv->dev, "unable to register MDIO bus %s\n",
+ priv->user_mii_bus->id);
+ goto err_put_node;
+ }
+
+err_put_node:
+ of_node_put(mdio_np);
+
+ return ret;
+}
+EXPORT_SYMBOL_NS_GPL(rtl83xx_setup_user_mdio, REALTEK_DSA);
+
/**
* rtl83xx_probe() - probe a Realtek switch
* @dev: the device being probed
@@ -12,6 +12,7 @@ struct realtek_interface_info {
void rtl83xx_lock(void *ctx);
void rtl83xx_unlock(void *ctx);
+int rtl83xx_setup_user_mdio(struct dsa_switch *ds);
struct realtek_priv *
rtl83xx_probe(struct device *dev,
const struct realtek_interface_info *interface_info);
In the user MDIO driver, despite numerous references to SMI, including its compatible string, there's nothing inherently specific about the SMI interface in the user MDIO bus. Consequently, the code has been migrated to the rtl83xx module. All references to SMI have been eliminated. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> --- drivers/net/dsa/realtek/realtek-smi.c | 57 +---------------------- drivers/net/dsa/realtek/rtl83xx.c | 67 +++++++++++++++++++++++++++ drivers/net/dsa/realtek/rtl83xx.h | 1 + 3 files changed, 69 insertions(+), 56 deletions(-)