@@ -1,4 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_NET_DSA_REALTEK) += realtek-dsa.o
+realtek-dsa-objs := rtl83xx.o
obj-$(CONFIG_NET_DSA_REALTEK_MDIO) += realtek-mdio.o
obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o
@@ -26,6 +26,7 @@
#include "realtek.h"
#include "realtek-mdio.h"
+#include "rtl83xx.h"
/* Read/write via mdiobus */
#define REALTEK_MDIO_CTRL0_REG 31
@@ -100,55 +101,19 @@ static int realtek_mdio_read(void *ctx, u32 reg, u32 *val)
return ret;
}
-static void realtek_mdio_lock(void *ctx)
-{
- struct realtek_priv *priv = ctx;
-
- mutex_lock(&priv->map_lock);
-}
-
-static void realtek_mdio_unlock(void *ctx)
-{
- struct realtek_priv *priv = ctx;
-
- mutex_unlock(&priv->map_lock);
-}
-
-static const struct regmap_config realtek_mdio_regmap_config = {
- .reg_bits = 10, /* A4..A0 R4..R0 */
- .val_bits = 16,
- .reg_stride = 1,
- /* PHY regs are at 0x8000 */
- .max_register = 0xffff,
- .reg_format_endian = REGMAP_ENDIAN_BIG,
- .reg_read = realtek_mdio_read,
- .reg_write = realtek_mdio_write,
- .cache_type = REGCACHE_NONE,
- .lock = realtek_mdio_lock,
- .unlock = realtek_mdio_unlock,
-};
-
-static const struct regmap_config realtek_mdio_nolock_regmap_config = {
- .reg_bits = 10, /* A4..A0 R4..R0 */
- .val_bits = 16,
- .reg_stride = 1,
- /* PHY regs are at 0x8000 */
- .max_register = 0xffff,
- .reg_format_endian = REGMAP_ENDIAN_BIG,
+static const struct realtek_interface_info realtek_mdio_info = {
.reg_read = realtek_mdio_read,
.reg_write = realtek_mdio_write,
- .cache_type = REGCACHE_NONE,
- .disable_locking = true,
};
/**
* realtek_mdio_probe() - Probe a platform device for an MDIO-connected switch
* @pdev: platform_device to probe on.
*
- * This function should be used as the .probe in an mdio_driver. It
- * initializes realtek_priv and read data from the device-tree node. The switch
- * is hard resetted if a method is provided. It checks the switch chip ID and,
- * finally, a DSA switch is registered.
+ * This function should be used as the .probe in an mdio_driver. After
+ * calling the common probe function for both interfaces, it initializes the
+ * values specific for MDIO-connected devices. Finally, it calls a common
+ * function to register the DSA switch.
*
* Context: Any context. Takes and releases priv->map_lock.
* Return: Returns 0 on success, a negative error on failure.
@@ -156,94 +121,22 @@ static const struct regmap_config realtek_mdio_nolock_regmap_config = {
*/
int realtek_mdio_probe(struct mdio_device *mdiodev)
{
- struct realtek_priv *priv;
struct device *dev = &mdiodev->dev;
- const struct realtek_variant *var;
- struct regmap_config rc;
- struct device_node *np;
+ struct realtek_priv *priv;
int ret;
- var = of_device_get_match_data(dev);
- if (!var)
- return -EINVAL;
-
- priv = devm_kzalloc(&mdiodev->dev,
- size_add(sizeof(*priv), var->chip_data_sz),
- GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- mutex_init(&priv->map_lock);
-
- rc = realtek_mdio_regmap_config;
- rc.lock_arg = priv;
- priv->map = devm_regmap_init(dev, NULL, priv, &rc);
- if (IS_ERR(priv->map)) {
- ret = PTR_ERR(priv->map);
- dev_err(dev, "regmap init failed: %d\n", ret);
- return ret;
- }
-
- rc = realtek_mdio_nolock_regmap_config;
- priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
- if (IS_ERR(priv->map_nolock)) {
- ret = PTR_ERR(priv->map_nolock);
- dev_err(dev, "regmap init failed: %d\n", ret);
- return ret;
- }
+ priv = rtl83xx_probe(dev, &realtek_mdio_info);
+ if (IS_ERR(priv))
+ return PTR_ERR(priv);
- priv->mdio_addr = mdiodev->addr;
priv->bus = mdiodev->bus;
- priv->dev = &mdiodev->dev;
- priv->chip_data = (void *)priv + sizeof(*priv);
-
- priv->variant = var;
- priv->ops = var->ops;
-
+ priv->mdio_addr = mdiodev->addr;
priv->write_reg_noack = realtek_mdio_write;
+ priv->ds_ops = priv->variant->ds_ops_mdio;
- np = dev->of_node;
-
- dev_set_drvdata(dev, priv);
-
- /* TODO: if power is software controlled, set up any regulators here */
- priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
-
- priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(priv->reset)) {
- dev_err(dev, "failed to get RESET GPIO\n");
- return PTR_ERR(priv->reset);
- }
-
- if (priv->reset) {
- gpiod_set_value(priv->reset, 1);
- dev_dbg(dev, "asserted RESET\n");
- msleep(REALTEK_HW_STOP_DELAY);
- gpiod_set_value(priv->reset, 0);
- msleep(REALTEK_HW_START_DELAY);
- dev_dbg(dev, "deasserted RESET\n");
- }
-
- ret = priv->ops->detect(priv);
- if (ret) {
- dev_err(dev, "unable to detect switch\n");
- return ret;
- }
-
- priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
- if (!priv->ds)
- return -ENOMEM;
-
- priv->ds->dev = dev;
- priv->ds->num_ports = priv->num_ports;
- priv->ds->priv = priv;
- priv->ds->ops = var->ds_ops_mdio;
-
- ret = dsa_register_switch(priv->ds);
- if (ret) {
- dev_err(priv->dev, "unable to register switch ret = %d\n", ret);
+ ret = rtl83xx_register_switch(priv);
+ if (ret)
return ret;
- }
return 0;
}
@@ -254,8 +147,8 @@ EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, REALTEK_DSA);
* @pdev: platform_device to probe on.
*
* This function should be used as the .remove_new in an mdio_driver. First
- * it unregisters the DSA switch and cleans internal data. If a method is
- * provided, the hard reset is asserted to avoid traffic leakage.
+ * it unregisters the DSA switch and cleans internal data. Finally, it calls
+ * the common remove function.
*
* Context: Any context.
* Return: Nothing.
@@ -270,9 +163,7 @@ void realtek_mdio_remove(struct mdio_device *mdiodev)
dsa_unregister_switch(priv->ds);
- /* leave the device reset asserted */
- if (priv->reset)
- gpiod_set_value(priv->reset, 1);
+ rtl83xx_remove(priv);
}
EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, REALTEK_DSA);
@@ -303,3 +194,5 @@ EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, REALTEK_DSA);
MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>");
MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface");
MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(REALTEK_DSA);
+
@@ -41,6 +41,7 @@
#include "realtek.h"
#include "realtek-smi.h"
+#include "rtl83xx.h"
#define REALTEK_SMI_ACK_RETRY_COUNT 5
@@ -311,47 +312,6 @@ static int realtek_smi_read(void *ctx, u32 reg, u32 *val)
return realtek_smi_read_reg(priv, reg, val);
}
-static void realtek_smi_lock(void *ctx)
-{
- struct realtek_priv *priv = ctx;
-
- mutex_lock(&priv->map_lock);
-}
-
-static void realtek_smi_unlock(void *ctx)
-{
- struct realtek_priv *priv = ctx;
-
- mutex_unlock(&priv->map_lock);
-}
-
-static const struct regmap_config realtek_smi_regmap_config = {
- .reg_bits = 10, /* A4..A0 R4..R0 */
- .val_bits = 16,
- .reg_stride = 1,
- /* PHY regs are at 0x8000 */
- .max_register = 0xffff,
- .reg_format_endian = REGMAP_ENDIAN_BIG,
- .reg_read = realtek_smi_read,
- .reg_write = realtek_smi_write,
- .cache_type = REGCACHE_NONE,
- .lock = realtek_smi_lock,
- .unlock = realtek_smi_unlock,
-};
-
-static const struct regmap_config realtek_smi_nolock_regmap_config = {
- .reg_bits = 10, /* A4..A0 R4..R0 */
- .val_bits = 16,
- .reg_stride = 1,
- /* PHY regs are at 0x8000 */
- .max_register = 0xffff,
- .reg_format_endian = REGMAP_ENDIAN_BIG,
- .reg_read = realtek_smi_read,
- .reg_write = realtek_smi_write,
- .cache_type = REGCACHE_NONE,
- .disable_locking = true,
-};
-
static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum)
{
struct realtek_priv *priv = bus->priv;
@@ -409,14 +369,19 @@ static int realtek_smi_setup_mdio(struct dsa_switch *ds)
return ret;
}
+static const struct realtek_interface_info realtek_smi_info = {
+ .reg_read = realtek_smi_read,
+ .reg_write = realtek_smi_write,
+};
+
/**
* realtek_smi_probe() - Probe a platform device for an SMI-connected switch
* @pdev: platform_device to probe on.
*
- * This function should be used as the .probe in a platform_driver. It
- * initializes realtek_priv and read data from the device-tree node. The switch
- * is hard resetted if a method is provided. It checks the switch chip ID and,
- * finally, a DSA switch is registered.
+ * This function should be used as the .probe in a platform_driver. After
+ * calling the common probe function for both interfaces, it initializes the
+ * values specific for SMI-connected devices. Finally, it calls a common
+ * function to register the DSA switch.
*
* Context: Any context. Takes and releases priv->map_lock.
* Return: Returns 0 on success, a negative error on failure.
@@ -424,97 +389,31 @@ static int realtek_smi_setup_mdio(struct dsa_switch *ds)
*/
int realtek_smi_probe(struct platform_device *pdev)
{
- const struct realtek_variant *var;
struct device *dev = &pdev->dev;
struct realtek_priv *priv;
- struct regmap_config rc;
- struct device_node *np;
int ret;
- var = of_device_get_match_data(dev);
- np = dev->of_node;
-
- priv = devm_kzalloc(dev, sizeof(*priv) + var->chip_data_sz, GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
- priv->chip_data = (void *)priv + sizeof(*priv);
-
- mutex_init(&priv->map_lock);
-
- rc = realtek_smi_regmap_config;
- rc.lock_arg = priv;
- priv->map = devm_regmap_init(dev, NULL, priv, &rc);
- if (IS_ERR(priv->map)) {
- ret = PTR_ERR(priv->map);
- dev_err(dev, "regmap init failed: %d\n", ret);
- return ret;
- }
-
- rc = realtek_smi_nolock_regmap_config;
- priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
- if (IS_ERR(priv->map_nolock)) {
- ret = PTR_ERR(priv->map_nolock);
- dev_err(dev, "regmap init failed: %d\n", ret);
- return ret;
- }
-
- /* Link forward and backward */
- priv->dev = dev;
- priv->variant = var;
- priv->ops = var->ops;
-
- priv->setup_interface = realtek_smi_setup_mdio;
- priv->write_reg_noack = realtek_smi_write_reg_noack;
-
- dev_set_drvdata(dev, priv);
- spin_lock_init(&priv->lock);
-
- /* TODO: if power is software controlled, set up any regulators here */
-
- priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(priv->reset)) {
- dev_err(dev, "failed to get RESET GPIO\n");
- return PTR_ERR(priv->reset);
- }
- if (priv->reset) {
- gpiod_set_value(priv->reset, 1);
- dev_dbg(dev, "asserted RESET\n");
- msleep(REALTEK_HW_STOP_DELAY);
- gpiod_set_value(priv->reset, 0);
- msleep(REALTEK_HW_START_DELAY);
- dev_dbg(dev, "deasserted RESET\n");
- }
+ priv = rtl83xx_probe(dev, &realtek_smi_info);
+ if (IS_ERR(priv))
+ return PTR_ERR(priv);
/* Fetch MDIO pins */
priv->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW);
if (IS_ERR(priv->mdc))
return PTR_ERR(priv->mdc);
+
priv->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW);
if (IS_ERR(priv->mdio))
return PTR_ERR(priv->mdio);
- priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
+ priv->write_reg_noack = realtek_smi_write_reg_noack;
+ priv->setup_interface = realtek_smi_setup_mdio;
+ priv->ds_ops = priv->variant->ds_ops_smi;
- ret = priv->ops->detect(priv);
- if (ret) {
- dev_err(dev, "unable to detect switch\n");
+ ret = rtl83xx_register_switch(priv);
+ if (ret)
return ret;
- }
-
- priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
- if (!priv->ds)
- return -ENOMEM;
- priv->ds->dev = dev;
- priv->ds->num_ports = priv->num_ports;
- priv->ds->priv = priv;
-
- priv->ds->ops = var->ds_ops_smi;
- ret = dsa_register_switch(priv->ds);
- if (ret) {
- dev_err_probe(dev, ret, "unable to register switch\n");
- return ret;
- }
return 0;
}
EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, REALTEK_DSA);
@@ -524,8 +423,8 @@ EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, REALTEK_DSA);
* @pdev: platform_device to probe on.
*
* This function should be used as the .remove_new in a platform_driver. First
- * it unregisters the DSA switch and cleans internal data. If a method is
- * provided, the hard reset is asserted to avoid traffic leakage.
+ * it unregisters the DSA switch and cleans internal data. Finally, it calls
+ * the common remove function.
*
* Context: Any context.
* Return: Nothing.
@@ -539,12 +438,11 @@ void realtek_smi_remove(struct platform_device *pdev)
return;
dsa_unregister_switch(priv->ds);
+
if (priv->user_mii_bus)
of_node_put(priv->user_mii_bus->dev.of_node);
- /* leave the device reset asserted */
- if (priv->reset)
- gpiod_set_value(priv->reset, 1);
+ rtl83xx_remove(priv);
}
EXPORT_SYMBOL_NS_GPL(realtek_smi_remove, REALTEK_DSA);
@@ -575,3 +473,5 @@ EXPORT_SYMBOL_NS_GPL(realtek_smi_shutdown, REALTEK_DSA);
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via SMI interface");
MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(REALTEK_DSA);
+
@@ -60,6 +60,7 @@ struct realtek_priv {
spinlock_t lock; /* Locks around command writes */
struct dsa_switch *ds;
+ const struct dsa_switch_ops *ds_ops;
struct irq_domain *irqdomain;
bool leds_disabled;
@@ -103,6 +103,7 @@
#include "realtek.h"
#include "realtek-smi.h"
#include "realtek-mdio.h"
+#include "rtl83xx.h"
/* Family-specific data and limits */
#define RTL8365MB_PHYADDRMAX 7
@@ -691,7 +692,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy,
u32 val;
int ret;
- mutex_lock(&priv->map_lock);
+ rtl83xx_lock(priv);
ret = rtl8365mb_phy_poll_busy(priv);
if (ret)
@@ -724,7 +725,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy,
*data = val & 0xFFFF;
out:
- mutex_unlock(&priv->map_lock);
+ rtl83xx_unlock(priv);
return ret;
}
@@ -735,7 +736,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy,
u32 val;
int ret;
- mutex_lock(&priv->map_lock);
+ rtl83xx_lock(priv);
ret = rtl8365mb_phy_poll_busy(priv);
if (ret)
@@ -766,7 +767,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy,
goto out;
out:
- mutex_unlock(&priv->map_lock);
+ rtl83xx_unlock(priv);
return 0;
}
@@ -25,6 +25,7 @@
#include "realtek.h"
#include "realtek-smi.h"
#include "realtek-mdio.h"
+#include "rtl83xx.h"
#define RTL8366RB_PORT_NUM_CPU 5
#define RTL8366RB_NUM_PORTS 6
@@ -1720,7 +1721,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum)
if (phy > RTL8366RB_PHY_NO_MAX)
return -EINVAL;
- mutex_lock(&priv->map_lock);
+ rtl83xx_lock(priv);
ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG,
RTL8366RB_PHY_CTRL_READ);
@@ -1748,7 +1749,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum)
phy, regnum, reg, val);
out:
- mutex_unlock(&priv->map_lock);
+ rtl83xx_unlock(priv);
return ret;
}
@@ -1762,7 +1763,7 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum,
if (phy > RTL8366RB_PHY_NO_MAX)
return -EINVAL;
- mutex_lock(&priv->map_lock);
+ rtl83xx_lock(priv);
ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG,
RTL8366RB_PHY_CTRL_WRITE);
@@ -1779,7 +1780,7 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum,
goto out;
out:
- mutex_unlock(&priv->map_lock);
+ rtl83xx_unlock(priv);
return ret;
}
new file mode 100644
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/module.h>
+
+#include "realtek.h"
+#include "rtl83xx.h"
+
+/**
+ * rtl83xx_lock() - Locks the mutex used by regmaps
+ * @ctx: realtek_priv pointer
+ *
+ * This function is passed to regmap to be used as the lock function.
+ * It is also used externally to block regmap before executing multiple
+ * operations that must happen in sequence (which will use
+ * realtek_priv.map_nolock instead).
+ *
+ * Context: Any context. Holds priv->map_lock lock.
+ * Return: nothing
+ */
+void rtl83xx_lock(void *ctx)
+{
+ struct realtek_priv *priv = ctx;
+
+ mutex_lock(&priv->map_lock);
+}
+EXPORT_SYMBOL_NS_GPL(rtl83xx_lock, REALTEK_DSA);
+
+/**
+ * rtl83xx_unlock() - Unlocks the mutex used by regmaps
+ * @ctx: realtek_priv pointer
+ *
+ * This function unlocks the lock acquired by rtl83xx_lock.
+ *
+ * Context: Any context. Releases priv->map_lock lock
+ * Return: nothing
+ */
+void rtl83xx_unlock(void *ctx)
+{
+ struct realtek_priv *priv = ctx;
+
+ mutex_unlock(&priv->map_lock);
+}
+EXPORT_SYMBOL_NS_GPL(rtl83xx_unlock, REALTEK_DSA);
+
+/**
+ * rtl83xx_probe() - probe a Realtek switch
+ * @dev: the device being probed
+ * @interface_info: reg read/write methods for a specific management interface.
+ *
+ * This function initializes realtek_priv and read data from the device-tree
+ * node. The switch is hard resetted if a method is provided.
+ *
+ * Context: Any context.
+ * Return: Pointer to the realtek_priv or ERR_PTR() in case of failure.
+ *
+ * The realtek_priv pointer does not need to be freed as it is controlled by
+ * devres.
+ *
+ */
+struct realtek_priv *
+rtl83xx_probe(struct device *dev,
+ const struct realtek_interface_info *interface_info)
+{
+ const struct realtek_variant *var;
+ struct realtek_priv *priv;
+ struct regmap_config rc = {
+ .reg_bits = 10, /* A4..A0 R4..R0 */
+ .val_bits = 16,
+ .reg_stride = 1,
+ .max_register = 0xffff,
+ .reg_format_endian = REGMAP_ENDIAN_BIG,
+ .reg_read = interface_info->reg_read,
+ .reg_write = interface_info->reg_write,
+ .cache_type = REGCACHE_NONE,
+ .lock = rtl83xx_lock,
+ .unlock = rtl83xx_unlock,
+ };
+ int ret;
+
+ var = of_device_get_match_data(dev);
+ if (!var)
+ return ERR_PTR(-EINVAL);
+
+ priv = devm_kzalloc(dev, size_add(sizeof(*priv), var->chip_data_sz),
+ GFP_KERNEL);
+ if (!priv)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_init(&priv->map_lock);
+
+ rc.lock_arg = priv;
+ priv->map = devm_regmap_init(dev, NULL, priv, &rc);
+ if (IS_ERR(priv->map)) {
+ ret = PTR_ERR(priv->map);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ rc.disable_locking = true;
+ priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
+ if (IS_ERR(priv->map_nolock)) {
+ ret = PTR_ERR(priv->map_nolock);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ /* Link forward and backward */
+ priv->dev = dev;
+ priv->variant = var;
+ priv->ops = var->ops;
+ priv->chip_data = (void *)priv + sizeof(*priv);
+
+ dev_set_drvdata(dev, priv);
+ spin_lock_init(&priv->lock);
+
+ priv->leds_disabled = of_property_read_bool(dev->of_node,
+ "realtek,disable-leds");
+
+ /* TODO: if power is software controlled, set up any regulators here */
+
+ priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->reset)) {
+ dev_err(dev, "failed to get RESET GPIO\n");
+ return ERR_CAST(priv->reset);
+ }
+ if (priv->reset) {
+ gpiod_set_value(priv->reset, 1);
+ dev_dbg(dev, "asserted RESET\n");
+ msleep(REALTEK_HW_STOP_DELAY);
+ gpiod_set_value(priv->reset, 0);
+ msleep(REALTEK_HW_START_DELAY);
+ dev_dbg(dev, "deasserted RESET\n");
+ }
+
+ return priv;
+}
+EXPORT_SYMBOL_NS_GPL(rtl83xx_probe, REALTEK_DSA);
+
+/**
+ * rtl83xx_register_switch() - detects and register a switch
+ * @priv: realtek_priv pointer
+ *
+ * This function first checks the switch chip ID and register a DSA
+ * switch.
+ *
+ * Context: Any context. Takes and releases priv->map_lock.
+ * Return: 0 on success, negative value for failure.
+ */
+int rtl83xx_register_switch(struct realtek_priv *priv)
+{
+ int ret;
+
+ ret = priv->ops->detect(priv);
+ if (ret) {
+ dev_err_probe(priv->dev, ret, "unable to detect switch\n");
+ return ret;
+ }
+
+ priv->ds = devm_kzalloc(priv->dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ priv->ds->priv = priv;
+ priv->ds->dev = priv->dev;
+ priv->ds->ops = priv->ds_ops;
+ priv->ds->num_ports = priv->num_ports;
+
+ ret = dsa_register_switch(priv->ds);
+ if (ret) {
+ dev_err_probe(priv->dev, ret, "unable to register switch\n");
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(rtl83xx_register_switch, REALTEK_DSA);
+
+/**
+ * rtl83xx_remove() - Cleanup a realtek switch driver
+ * @ctx: realtek_priv pointer
+ *
+ * If a method is provided, this function asserts the hard reset of the switch
+ * in order to avoid leaking traffic when the driver is gone.
+ *
+ * Context: Any context.
+ * Return: nothing
+ */
+void rtl83xx_remove(struct realtek_priv *priv)
+{
+ if (!priv)
+ return;
+
+ /* leave the device reset asserted */
+ if (priv->reset)
+ gpiod_set_value(priv->reset, 1);
+}
+EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, REALTEK_DSA);
+
+MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>");
+MODULE_DESCRIPTION("Realtek DSA switches common module");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _RTL83XX_H
+#define _RTL83XX_H
+
+#include <linux/regmap.h>
+
+struct realtek_interface_info {
+ int (*reg_read)(void *ctx, u32 reg, u32 *val);
+ int (*reg_write)(void *ctx, u32 reg, u32 val);
+};
+
+void rtl83xx_lock(void *ctx);
+void rtl83xx_unlock(void *ctx);
+struct realtek_priv *
+rtl83xx_probe(struct device *dev,
+ const struct realtek_interface_info *interface_info);
+int rtl83xx_register_switch(struct realtek_priv *priv);
+void rtl83xx_remove(struct realtek_priv *priv);
+
+#endif /* _RTL83XX_H */
Some code can be shared between both interface modules (MDIO and SMI) and among variants. These interface functions migrated to a common module: - rtl83xx_lock - rtl83xx_unlock - rtl83xx_probe - rtl83xx_register_switch - rtl83xx_remove The reset during probe was moved to the end of the common probe. This way, we avoid a reset if anything else fails. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> --- drivers/net/dsa/realtek/Makefile | 2 + drivers/net/dsa/realtek/realtek-mdio.c | 145 +++--------------- drivers/net/dsa/realtek/realtek-smi.c | 150 +++--------------- drivers/net/dsa/realtek/realtek.h | 1 + drivers/net/dsa/realtek/rtl8365mb.c | 9 +- drivers/net/dsa/realtek/rtl8366rb.c | 9 +- drivers/net/dsa/realtek/rtl83xx.c | 201 +++++++++++++++++++++++++ drivers/net/dsa/realtek/rtl83xx.h | 21 +++ 8 files changed, 279 insertions(+), 259 deletions(-) create mode 100644 drivers/net/dsa/realtek/rtl83xx.c create mode 100644 drivers/net/dsa/realtek/rtl83xx.h