From patchwork Tue Jan 23 21:55:57 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luiz Angelo Daros de Luca X-Patchwork-Id: 13528187 X-Patchwork-Delegate: kuba@kernel.org Received: from mail-il1-f180.google.com (mail-il1-f180.google.com [209.85.166.180]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B5A014EB29 for ; Tue, 23 Jan 2024 21:57:12 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.166.180 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706047035; cv=none; b=mb/XYoExvMC/MacKx0ARcIKgoeJyNG/0ISszmsloBIDrUSHQkQHKWDxjFkAc4x0M3V0Yu4PVrJJLYRCDemZLJeSpYIR5tChWf+wl/nK0hi4llHEG/8Lv8oo4pqnSVM4Z0N32UwHHHjKqhblIIff7sCa9Md0FK0vGHajta3GjMHw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706047035; c=relaxed/simple; bh=pswhXqnecuEGZaOGOSQ8njyGIX8bIkw41ZaBGJlgM5w=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=SdYm5st0h4pEFD/rvjhublAlwHZM9KOIfsgI/+TeZUyjOty0yoTS9IL66YgxJ6KTaHC4EMhII3SZ0T8XxX+jJ51sWCUAHQp/7dab3OkAs9F8xrFJD/IZFt6wih1CTxq5Zr4Oy0dS/rfGGHXYXNuPw5CUpgRaO4fjHtjvug2gMPg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=LfUosGGJ; arc=none smtp.client-ip=209.85.166.180 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="LfUosGGJ" Received: by mail-il1-f180.google.com with SMTP id e9e14a558f8ab-36278a62926so8062395ab.3 for ; Tue, 23 Jan 2024 13:57:12 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1706047031; x=1706651831; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=ALi6K9jI/Xw4oB+TdMlVvsDXkVqF1LgbvaH562oL+Ak=; b=LfUosGGJ4dC6YRoe5Z107wGBxMlgYMWBFkplx7LkAA+0donjodqCEeCXmbjRZbtu2N wX8ThXKhHSm5x3dD0WdS/bX6zthIkE4ALv+TM4CNOvOiJ6uxXD8/f1Ihhff7L+lB2DPS cAMKn7ulTjVtW5+Gdq0jUpuDdrw0qz+Nk5qVIVTSYRmk1r5RbnYv1fPW/vFP6PaBxa7A jzssQiFNF9lnSJIrb2lFkFcY30PkoKkbGLoIftI640HDRCGvX13JLw0LHanP+vULnb77 HH+qEJaKAbS6xEhNjO1W4ihIlUH7vk7AScGZuRRrN/boFSBMo/xXaa6OzucymQpZ+Qvd MSCQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1706047031; x=1706651831; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=ALi6K9jI/Xw4oB+TdMlVvsDXkVqF1LgbvaH562oL+Ak=; b=KrLR+L4s+zAIR6Qo1KmYuHIKU+miHV1+c5CEMAv/AYxc+2nXYRdX/uMLlAwE0ChN5r T5wtawZXn9PpUVlleb2aepUgFEC5fkkpGPnT4B2DMPShnTNnfzePaKoZ5Iwzb5Ef9wwl uP1nRMHfgAdL5JezlbZUJ+xwIDTU3xYKsffjQUfJKKX00oBfiLwcvbNUgy70Ey4/PO61 +wwXvHJf4E2dEhflRKG5beavMOttDyLUiaVMovzEolXdicoXaC6X358dlwCeExWb7vs9 uG0SqyY2tfSXvhzr0h0NXFbP7aNTYSiJRkuptDCzyjcpvJkXp9b8W5xeW07gZW4XTf6T Cd4Q== X-Gm-Message-State: AOJu0YwJ7ls2+b9yG2rwam3mN8T0it3FeC7cYfrvMSN0Lgs/j3uUsHkw 4PMAyc0TvT9D9uV3QY+zuxxF/pwacNkfKZeAtn7YdczIKCaU+TcBVkDClWylRYk= X-Google-Smtp-Source: AGHT+IEXf28aALna45PYOvhgrs6oSt2vRJo7ll2vIf9QFlJq+w3xRNXxNmRsyY5mfP8DZhD62iKiLQ== X-Received: by 2002:a92:cad1:0:b0:361:8f10:1a01 with SMTP id m17-20020a92cad1000000b003618f101a01mr526632ilq.18.1706047030718; Tue, 23 Jan 2024 13:57:10 -0800 (PST) Received: from tresc054937.tre-sc.gov.br (177-131-126-82.acessoline.net.br. [177.131.126.82]) by smtp.gmail.com with ESMTPSA id q17-20020a637511000000b005d43d5a9678sm693738pgc.35.2024.01.23.13.57.06 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 23 Jan 2024 13:57:10 -0800 (PST) From: Luiz Angelo Daros de Luca To: netdev@vger.kernel.org Cc: linus.walleij@linaro.org, alsi@bang-olufsen.dk, andrew@lunn.ch, f.fainelli@gmail.com, olteanv@gmail.com, davem@davemloft.net, edumazet@google.com, kuba@kernel.org, pabeni@redhat.com, arinc.unal@arinc9.com, ansuelsmth@gmail.com, Luiz Angelo Daros de Luca Subject: [PATCH net-next v4 05/11] net: dsa: realtek: common rtl83xx module Date: Tue, 23 Jan 2024 18:55:57 -0300 Message-ID: <20240123215606.26716-6-luizluca@gmail.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240123215606.26716-1-luizluca@gmail.com> References: <20240123215606.26716-1-luizluca@gmail.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Patchwork-Delegate: kuba@kernel.org Some code can be shared between both interface modules (MDIO and SMI) and among variants. These interface functions migrated to a common module: - rtl83xx_lock - rtl83xx_unlock - rtl83xx_probe - rtl83xx_register_switch - rtl83xx_remove The reset during probe was moved to the end of the common probe. This way, we avoid a reset if anything else fails. Signed-off-by: Luiz Angelo Daros de Luca --- drivers/net/dsa/realtek/Makefile | 2 + drivers/net/dsa/realtek/realtek-mdio.c | 145 +++--------------- drivers/net/dsa/realtek/realtek-smi.c | 150 +++--------------- drivers/net/dsa/realtek/realtek.h | 1 + drivers/net/dsa/realtek/rtl8365mb.c | 9 +- drivers/net/dsa/realtek/rtl8366rb.c | 9 +- drivers/net/dsa/realtek/rtl83xx.c | 201 +++++++++++++++++++++++++ drivers/net/dsa/realtek/rtl83xx.h | 21 +++ 8 files changed, 279 insertions(+), 259 deletions(-) create mode 100644 drivers/net/dsa/realtek/rtl83xx.c create mode 100644 drivers/net/dsa/realtek/rtl83xx.h diff --git a/drivers/net/dsa/realtek/Makefile b/drivers/net/dsa/realtek/Makefile index 0aab57252a7c..67b5ee1c43a9 100644 --- a/drivers/net/dsa/realtek/Makefile +++ b/drivers/net/dsa/realtek/Makefile @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_NET_DSA_REALTEK) += realtek-dsa.o +realtek-dsa-objs := rtl83xx.o obj-$(CONFIG_NET_DSA_REALTEK_MDIO) += realtek-mdio.o obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c index 57bd5d8814c2..26b8371ecc87 100644 --- a/drivers/net/dsa/realtek/realtek-mdio.c +++ b/drivers/net/dsa/realtek/realtek-mdio.c @@ -26,6 +26,7 @@ #include "realtek.h" #include "realtek-mdio.h" +#include "rtl83xx.h" /* Read/write via mdiobus */ #define REALTEK_MDIO_CTRL0_REG 31 @@ -100,55 +101,19 @@ static int realtek_mdio_read(void *ctx, u32 reg, u32 *val) return ret; } -static void realtek_mdio_lock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_lock(&priv->map_lock); -} - -static void realtek_mdio_unlock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_unlock(&priv->map_lock); -} - -static const struct regmap_config realtek_mdio_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, - .reg_read = realtek_mdio_read, - .reg_write = realtek_mdio_write, - .cache_type = REGCACHE_NONE, - .lock = realtek_mdio_lock, - .unlock = realtek_mdio_unlock, -}; - -static const struct regmap_config realtek_mdio_nolock_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, +static const struct realtek_interface_info realtek_mdio_info = { .reg_read = realtek_mdio_read, .reg_write = realtek_mdio_write, - .cache_type = REGCACHE_NONE, - .disable_locking = true, }; /** * realtek_mdio_probe() - Probe a platform device for an MDIO-connected switch * @pdev: platform_device to probe on. * - * This function should be used as the .probe in an mdio_driver. It - * initializes realtek_priv and read data from the device-tree node. The switch - * is hard resetted if a method is provided. It checks the switch chip ID and, - * finally, a DSA switch is registered. + * This function should be used as the .probe in an mdio_driver. After + * calling the common probe function for both interfaces, it initializes the + * values specific for MDIO-connected devices. Finally, it calls a common + * function to register the DSA switch. * * Context: Any context. Takes and releases priv->map_lock. * Return: Returns 0 on success, a negative error on failure. @@ -156,94 +121,22 @@ static const struct regmap_config realtek_mdio_nolock_regmap_config = { */ int realtek_mdio_probe(struct mdio_device *mdiodev) { - struct realtek_priv *priv; struct device *dev = &mdiodev->dev; - const struct realtek_variant *var; - struct regmap_config rc; - struct device_node *np; + struct realtek_priv *priv; int ret; - var = of_device_get_match_data(dev); - if (!var) - return -EINVAL; - - priv = devm_kzalloc(&mdiodev->dev, - size_add(sizeof(*priv), var->chip_data_sz), - GFP_KERNEL); - if (!priv) - return -ENOMEM; - - mutex_init(&priv->map_lock); - - rc = realtek_mdio_regmap_config; - rc.lock_arg = priv; - priv->map = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map)) { - ret = PTR_ERR(priv->map); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - rc = realtek_mdio_nolock_regmap_config; - priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map_nolock)) { - ret = PTR_ERR(priv->map_nolock); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } + priv = rtl83xx_probe(dev, &realtek_mdio_info); + if (IS_ERR(priv)) + return PTR_ERR(priv); - priv->mdio_addr = mdiodev->addr; priv->bus = mdiodev->bus; - priv->dev = &mdiodev->dev; - priv->chip_data = (void *)priv + sizeof(*priv); - - priv->variant = var; - priv->ops = var->ops; - + priv->mdio_addr = mdiodev->addr; priv->write_reg_noack = realtek_mdio_write; + priv->ds_ops = priv->variant->ds_ops_mdio; - np = dev->of_node; - - dev_set_drvdata(dev, priv); - - /* TODO: if power is software controlled, set up any regulators here */ - priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); - - priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(priv->reset)) { - dev_err(dev, "failed to get RESET GPIO\n"); - return PTR_ERR(priv->reset); - } - - if (priv->reset) { - gpiod_set_value(priv->reset, 1); - dev_dbg(dev, "asserted RESET\n"); - msleep(REALTEK_HW_STOP_DELAY); - gpiod_set_value(priv->reset, 0); - msleep(REALTEK_HW_START_DELAY); - dev_dbg(dev, "deasserted RESET\n"); - } - - ret = priv->ops->detect(priv); - if (ret) { - dev_err(dev, "unable to detect switch\n"); - return ret; - } - - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - - priv->ds->dev = dev; - priv->ds->num_ports = priv->num_ports; - priv->ds->priv = priv; - priv->ds->ops = var->ds_ops_mdio; - - ret = dsa_register_switch(priv->ds); - if (ret) { - dev_err(priv->dev, "unable to register switch ret = %d\n", ret); + ret = rtl83xx_register_switch(priv); + if (ret) return ret; - } return 0; } @@ -254,8 +147,8 @@ EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, REALTEK_DSA); * @pdev: platform_device to probe on. * * This function should be used as the .remove_new in an mdio_driver. First - * it unregisters the DSA switch and cleans internal data. If a method is - * provided, the hard reset is asserted to avoid traffic leakage. + * it unregisters the DSA switch and cleans internal data. Finally, it calls + * the common remove function. * * Context: Any context. * Return: Nothing. @@ -270,9 +163,7 @@ void realtek_mdio_remove(struct mdio_device *mdiodev) dsa_unregister_switch(priv->ds); - /* leave the device reset asserted */ - if (priv->reset) - gpiod_set_value(priv->reset, 1); + rtl83xx_remove(priv); } EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, REALTEK_DSA); @@ -303,3 +194,5 @@ EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, REALTEK_DSA); MODULE_AUTHOR("Luiz Angelo Daros de Luca "); MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(REALTEK_DSA); + diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c index 274dd96b099c..840b1a835d07 100644 --- a/drivers/net/dsa/realtek/realtek-smi.c +++ b/drivers/net/dsa/realtek/realtek-smi.c @@ -41,6 +41,7 @@ #include "realtek.h" #include "realtek-smi.h" +#include "rtl83xx.h" #define REALTEK_SMI_ACK_RETRY_COUNT 5 @@ -311,47 +312,6 @@ static int realtek_smi_read(void *ctx, u32 reg, u32 *val) return realtek_smi_read_reg(priv, reg, val); } -static void realtek_smi_lock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_lock(&priv->map_lock); -} - -static void realtek_smi_unlock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_unlock(&priv->map_lock); -} - -static const struct regmap_config realtek_smi_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, - .reg_read = realtek_smi_read, - .reg_write = realtek_smi_write, - .cache_type = REGCACHE_NONE, - .lock = realtek_smi_lock, - .unlock = realtek_smi_unlock, -}; - -static const struct regmap_config realtek_smi_nolock_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, - .reg_read = realtek_smi_read, - .reg_write = realtek_smi_write, - .cache_type = REGCACHE_NONE, - .disable_locking = true, -}; - static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum) { struct realtek_priv *priv = bus->priv; @@ -409,14 +369,19 @@ static int realtek_smi_setup_mdio(struct dsa_switch *ds) return ret; } +static const struct realtek_interface_info realtek_smi_info = { + .reg_read = realtek_smi_read, + .reg_write = realtek_smi_write, +}; + /** * realtek_smi_probe() - Probe a platform device for an SMI-connected switch * @pdev: platform_device to probe on. * - * This function should be used as the .probe in a platform_driver. It - * initializes realtek_priv and read data from the device-tree node. The switch - * is hard resetted if a method is provided. It checks the switch chip ID and, - * finally, a DSA switch is registered. + * This function should be used as the .probe in a platform_driver. After + * calling the common probe function for both interfaces, it initializes the + * values specific for SMI-connected devices. Finally, it calls a common + * function to register the DSA switch. * * Context: Any context. Takes and releases priv->map_lock. * Return: Returns 0 on success, a negative error on failure. @@ -424,97 +389,31 @@ static int realtek_smi_setup_mdio(struct dsa_switch *ds) */ int realtek_smi_probe(struct platform_device *pdev) { - const struct realtek_variant *var; struct device *dev = &pdev->dev; struct realtek_priv *priv; - struct regmap_config rc; - struct device_node *np; int ret; - var = of_device_get_match_data(dev); - np = dev->of_node; - - priv = devm_kzalloc(dev, sizeof(*priv) + var->chip_data_sz, GFP_KERNEL); - if (!priv) - return -ENOMEM; - priv->chip_data = (void *)priv + sizeof(*priv); - - mutex_init(&priv->map_lock); - - rc = realtek_smi_regmap_config; - rc.lock_arg = priv; - priv->map = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map)) { - ret = PTR_ERR(priv->map); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - rc = realtek_smi_nolock_regmap_config; - priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map_nolock)) { - ret = PTR_ERR(priv->map_nolock); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - /* Link forward and backward */ - priv->dev = dev; - priv->variant = var; - priv->ops = var->ops; - - priv->setup_interface = realtek_smi_setup_mdio; - priv->write_reg_noack = realtek_smi_write_reg_noack; - - dev_set_drvdata(dev, priv); - spin_lock_init(&priv->lock); - - /* TODO: if power is software controlled, set up any regulators here */ - - priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(priv->reset)) { - dev_err(dev, "failed to get RESET GPIO\n"); - return PTR_ERR(priv->reset); - } - if (priv->reset) { - gpiod_set_value(priv->reset, 1); - dev_dbg(dev, "asserted RESET\n"); - msleep(REALTEK_HW_STOP_DELAY); - gpiod_set_value(priv->reset, 0); - msleep(REALTEK_HW_START_DELAY); - dev_dbg(dev, "deasserted RESET\n"); - } + priv = rtl83xx_probe(dev, &realtek_smi_info); + if (IS_ERR(priv)) + return PTR_ERR(priv); /* Fetch MDIO pins */ priv->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW); if (IS_ERR(priv->mdc)) return PTR_ERR(priv->mdc); + priv->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW); if (IS_ERR(priv->mdio)) return PTR_ERR(priv->mdio); - priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); + priv->write_reg_noack = realtek_smi_write_reg_noack; + priv->setup_interface = realtek_smi_setup_mdio; + priv->ds_ops = priv->variant->ds_ops_smi; - ret = priv->ops->detect(priv); - if (ret) { - dev_err(dev, "unable to detect switch\n"); + ret = rtl83xx_register_switch(priv); + if (ret) return ret; - } - - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - priv->ds->dev = dev; - priv->ds->num_ports = priv->num_ports; - priv->ds->priv = priv; - - priv->ds->ops = var->ds_ops_smi; - ret = dsa_register_switch(priv->ds); - if (ret) { - dev_err_probe(dev, ret, "unable to register switch\n"); - return ret; - } return 0; } EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, REALTEK_DSA); @@ -524,8 +423,8 @@ EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, REALTEK_DSA); * @pdev: platform_device to probe on. * * This function should be used as the .remove_new in a platform_driver. First - * it unregisters the DSA switch and cleans internal data. If a method is - * provided, the hard reset is asserted to avoid traffic leakage. + * it unregisters the DSA switch and cleans internal data. Finally, it calls + * the common remove function. * * Context: Any context. * Return: Nothing. @@ -539,12 +438,11 @@ void realtek_smi_remove(struct platform_device *pdev) return; dsa_unregister_switch(priv->ds); + if (priv->user_mii_bus) of_node_put(priv->user_mii_bus->dev.of_node); - /* leave the device reset asserted */ - if (priv->reset) - gpiod_set_value(priv->reset, 1); + rtl83xx_remove(priv); } EXPORT_SYMBOL_NS_GPL(realtek_smi_remove, REALTEK_DSA); @@ -575,3 +473,5 @@ EXPORT_SYMBOL_NS_GPL(realtek_smi_shutdown, REALTEK_DSA); MODULE_AUTHOR("Linus Walleij "); MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via SMI interface"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(REALTEK_DSA); + diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h index 0c51b5132c61..fbd0616c1df3 100644 --- a/drivers/net/dsa/realtek/realtek.h +++ b/drivers/net/dsa/realtek/realtek.h @@ -60,6 +60,7 @@ struct realtek_priv { spinlock_t lock; /* Locks around command writes */ struct dsa_switch *ds; + const struct dsa_switch_ops *ds_ops; struct irq_domain *irqdomain; bool leds_disabled; diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c index bd76bcf5fa44..97a41ba73718 100644 --- a/drivers/net/dsa/realtek/rtl8365mb.c +++ b/drivers/net/dsa/realtek/rtl8365mb.c @@ -103,6 +103,7 @@ #include "realtek.h" #include "realtek-smi.h" #include "realtek-mdio.h" +#include "rtl83xx.h" /* Family-specific data and limits */ #define RTL8365MB_PHYADDRMAX 7 @@ -691,7 +692,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy, u32 val; int ret; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = rtl8365mb_phy_poll_busy(priv); if (ret) @@ -724,7 +725,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy, *data = val & 0xFFFF; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } @@ -735,7 +736,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy, u32 val; int ret; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = rtl8365mb_phy_poll_busy(priv); if (ret) @@ -766,7 +767,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy, goto out; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return 0; } diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c index 74e14b73a1ec..ec7a55d70bad 100644 --- a/drivers/net/dsa/realtek/rtl8366rb.c +++ b/drivers/net/dsa/realtek/rtl8366rb.c @@ -25,6 +25,7 @@ #include "realtek.h" #include "realtek-smi.h" #include "realtek-mdio.h" +#include "rtl83xx.h" #define RTL8366RB_PORT_NUM_CPU 5 #define RTL8366RB_NUM_PORTS 6 @@ -1720,7 +1721,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum) if (phy > RTL8366RB_PHY_NO_MAX) return -EINVAL; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, RTL8366RB_PHY_CTRL_READ); @@ -1748,7 +1749,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum) phy, regnum, reg, val); out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } @@ -1762,7 +1763,7 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum, if (phy > RTL8366RB_PHY_NO_MAX) return -EINVAL; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, RTL8366RB_PHY_CTRL_WRITE); @@ -1779,7 +1780,7 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum, goto out; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c new file mode 100644 index 000000000000..57d185226b03 --- /dev/null +++ b/drivers/net/dsa/realtek/rtl83xx.c @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include + +#include "realtek.h" +#include "rtl83xx.h" + +/** + * rtl83xx_lock() - Locks the mutex used by regmaps + * @ctx: realtek_priv pointer + * + * This function is passed to regmap to be used as the lock function. + * It is also used externally to block regmap before executing multiple + * operations that must happen in sequence (which will use + * realtek_priv.map_nolock instead). + * + * Context: Any context. Holds priv->map_lock lock. + * Return: nothing + */ +void rtl83xx_lock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_lock(&priv->map_lock); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_lock, REALTEK_DSA); + +/** + * rtl83xx_unlock() - Unlocks the mutex used by regmaps + * @ctx: realtek_priv pointer + * + * This function unlocks the lock acquired by rtl83xx_lock. + * + * Context: Any context. Releases priv->map_lock lock + * Return: nothing + */ +void rtl83xx_unlock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_unlock(&priv->map_lock); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_unlock, REALTEK_DSA); + +/** + * rtl83xx_probe() - probe a Realtek switch + * @dev: the device being probed + * @interface_info: reg read/write methods for a specific management interface. + * + * This function initializes realtek_priv and read data from the device-tree + * node. The switch is hard resetted if a method is provided. + * + * Context: Any context. + * Return: Pointer to the realtek_priv or ERR_PTR() in case of failure. + * + * The realtek_priv pointer does not need to be freed as it is controlled by + * devres. + * + */ +struct realtek_priv * +rtl83xx_probe(struct device *dev, + const struct realtek_interface_info *interface_info) +{ + const struct realtek_variant *var; + struct realtek_priv *priv; + struct regmap_config rc = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .reg_read = interface_info->reg_read, + .reg_write = interface_info->reg_write, + .cache_type = REGCACHE_NONE, + .lock = rtl83xx_lock, + .unlock = rtl83xx_unlock, + }; + int ret; + + var = of_device_get_match_data(dev); + if (!var) + return ERR_PTR(-EINVAL); + + priv = devm_kzalloc(dev, size_add(sizeof(*priv), var->chip_data_sz), + GFP_KERNEL); + if (!priv) + return ERR_PTR(-ENOMEM); + + mutex_init(&priv->map_lock); + + rc.lock_arg = priv; + priv->map = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map)) { + ret = PTR_ERR(priv->map); + dev_err(dev, "regmap init failed: %d\n", ret); + return ERR_PTR(ret); + } + + rc.disable_locking = true; + priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map_nolock)) { + ret = PTR_ERR(priv->map_nolock); + dev_err(dev, "regmap init failed: %d\n", ret); + return ERR_PTR(ret); + } + + /* Link forward and backward */ + priv->dev = dev; + priv->variant = var; + priv->ops = var->ops; + priv->chip_data = (void *)priv + sizeof(*priv); + + dev_set_drvdata(dev, priv); + spin_lock_init(&priv->lock); + + priv->leds_disabled = of_property_read_bool(dev->of_node, + "realtek,disable-leds"); + + /* TODO: if power is software controlled, set up any regulators here */ + + priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(priv->reset)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return ERR_CAST(priv->reset); + } + if (priv->reset) { + gpiod_set_value(priv->reset, 1); + dev_dbg(dev, "asserted RESET\n"); + msleep(REALTEK_HW_STOP_DELAY); + gpiod_set_value(priv->reset, 0); + msleep(REALTEK_HW_START_DELAY); + dev_dbg(dev, "deasserted RESET\n"); + } + + return priv; +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_probe, REALTEK_DSA); + +/** + * rtl83xx_register_switch() - detects and register a switch + * @priv: realtek_priv pointer + * + * This function first checks the switch chip ID and register a DSA + * switch. + * + * Context: Any context. Takes and releases priv->map_lock. + * Return: 0 on success, negative value for failure. + */ +int rtl83xx_register_switch(struct realtek_priv *priv) +{ + int ret; + + ret = priv->ops->detect(priv); + if (ret) { + dev_err_probe(priv->dev, ret, "unable to detect switch\n"); + return ret; + } + + priv->ds = devm_kzalloc(priv->dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; + + priv->ds->priv = priv; + priv->ds->dev = priv->dev; + priv->ds->ops = priv->ds_ops; + priv->ds->num_ports = priv->num_ports; + + ret = dsa_register_switch(priv->ds); + if (ret) { + dev_err_probe(priv->dev, ret, "unable to register switch\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_register_switch, REALTEK_DSA); + +/** + * rtl83xx_remove() - Cleanup a realtek switch driver + * @ctx: realtek_priv pointer + * + * If a method is provided, this function asserts the hard reset of the switch + * in order to avoid leaking traffic when the driver is gone. + * + * Context: Any context. + * Return: nothing + */ +void rtl83xx_remove(struct realtek_priv *priv) +{ + if (!priv) + return; + + /* leave the device reset asserted */ + if (priv->reset) + gpiod_set_value(priv->reset, 1); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, REALTEK_DSA); + +MODULE_AUTHOR("Luiz Angelo Daros de Luca "); +MODULE_DESCRIPTION("Realtek DSA switches common module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/realtek/rtl83xx.h b/drivers/net/dsa/realtek/rtl83xx.h new file mode 100644 index 000000000000..9eb8197a58fa --- /dev/null +++ b/drivers/net/dsa/realtek/rtl83xx.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _RTL83XX_H +#define _RTL83XX_H + +#include + +struct realtek_interface_info { + int (*reg_read)(void *ctx, u32 reg, u32 *val); + int (*reg_write)(void *ctx, u32 reg, u32 val); +}; + +void rtl83xx_lock(void *ctx); +void rtl83xx_unlock(void *ctx); +struct realtek_priv * +rtl83xx_probe(struct device *dev, + const struct realtek_interface_info *interface_info); +int rtl83xx_register_switch(struct realtek_priv *priv); +void rtl83xx_remove(struct realtek_priv *priv); + +#endif /* _RTL83XX_H */