diff mbox series

[net-next,v4,1/3] net: dsa: microchip: ksz8: move BMCR specific code to separate function

Message ID 20240124123314.734815-2-o.rempel@pengutronix.de (mailing list archive)
State Accepted
Commit 0c657f860e675e051553c579669804d21da52364
Delegated to: Netdev Maintainers
Headers show
Series net: dsa: microchip: implement PHY loopback | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1077 this patch: 1077
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 0 of 0 maintainers
netdev/build_clang success Errors and warnings before: 1095 this patch: 1095
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1095 this patch: 1095
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 412 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/contest success net-next-2024-01-26--21-00 (tests: 610)

Commit Message

Oleksij Rempel Jan. 24, 2024, 12:33 p.m. UTC
Isolate the Basic Mode Control Register (BMCR) operations in the ksz8795
driver by moving the BMCR-related code segments from the ksz8_r_phy()
and ksz8_w_phy() functions to newly created ksz8_r_phy_bmcr() and
ksz8_w_phy_bmcr() functions.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
---
 drivers/net/dsa/microchip/ksz8795.c | 366 ++++++++++++++++++----------
 1 file changed, 240 insertions(+), 126 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 61b71bcfe396..1269dde832bd 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -676,59 +676,118 @@  static int ksz8_r_phy_ctrl(struct ksz_device *dev, int port, u16 *val)
 	return 0;
 }
 
+/**
+ * ksz8_r_phy_bmcr - Translates and reads from the SMI interface to a MIIM PHY
+ *		     Basic mode control register (Reg. 0).
+ * @dev: The KSZ device instance.
+ * @port: The port number to be read.
+ * @val: The value read from the SMI interface.
+ *
+ * This function reads the SMI interface and translates the hardware register
+ * bit values into their corresponding control settings for a MIIM PHY Basic
+ * mode control register.
+ *
+ * MIIM Bit Mapping Comparison between KSZ8794 and KSZ8873
+ * -------------------------------------------------------------------
+ * MIIM Bit                    | KSZ8794 Reg/Bit             | KSZ8873 Reg/Bit
+ * ----------------------------+-----------------------------+----------------
+ * Bit 15 - Soft Reset         | 0xF/4                       | Not supported
+ * Bit 14 - Loopback           | 0xD/0 (MAC), 0xF/7 (PHY)    ~ 0xD/0 (PHY)
+ * Bit 13 - Force 100          | 0xC/6                       = 0xC/6
+ * Bit 12 - AN Enable          | 0xC/7 (reverse logic)       ~ 0xC/7
+ * Bit 11 - Power Down         | 0xD/3                       = 0xD/3
+ * Bit 10 - PHY Isolate        | 0xF/5                       | Not supported
+ * Bit 9 - Restart AN          | 0xD/5                       = 0xD/5
+ * Bit 8 - Force Full-Duplex   | 0xC/5                       = 0xC/5
+ * Bit 7 - Collision Test/Res. | Not supported               | Not supported
+ * Bit 6 - Reserved            | Not supported               | Not supported
+ * Bit 5 - Hp_mdix             | 0x9/7                       ~ 0xF/7
+ * Bit 4 - Force MDI           | 0xD/1                       = 0xD/1
+ * Bit 3 - Disable MDIX        | 0xD/2                       = 0xD/2
+ * Bit 2 - Disable Far-End F.  | ????                        | 0xD/4
+ * Bit 1 - Disable Transmit    | 0xD/6                       = 0xD/6
+ * Bit 0 - Disable LED         | 0xD/7                       = 0xD/7
+ * -------------------------------------------------------------------
+ *
+ * Return: 0 on success, error code on failure.
+ */
+static int ksz8_r_phy_bmcr(struct ksz_device *dev, u16 port, u16 *val)
+{
+	const u16 *regs = dev->info->regs;
+	u8 restart, speed, ctrl;
+	int ret;
+
+	*val = 0;
+
+	ret = ksz_pread8(dev, port, regs[P_NEG_RESTART_CTRL], &restart);
+	if (ret)
+		return ret;
+
+	ret = ksz_pread8(dev, port, regs[P_SPEED_STATUS], &speed);
+	if (ret)
+		return ret;
+
+	ret = ksz_pread8(dev, port, regs[P_FORCE_CTRL], &ctrl);
+	if (ret)
+		return ret;
+
+	if (restart & PORT_PHY_LOOPBACK)
+		*val |= BMCR_LOOPBACK;
+
+	if (ctrl & PORT_FORCE_100_MBIT)
+		*val |= BMCR_SPEED100;
+
+	if (ksz_is_ksz88x3(dev)) {
+		if ((ctrl & PORT_AUTO_NEG_ENABLE))
+			*val |= BMCR_ANENABLE;
+	} else {
+		if (!(ctrl & PORT_AUTO_NEG_DISABLE))
+			*val |= BMCR_ANENABLE;
+	}
+
+	if (restart & PORT_POWER_DOWN)
+		*val |= BMCR_PDOWN;
+
+	if (restart & PORT_AUTO_NEG_RESTART)
+		*val |= BMCR_ANRESTART;
+
+	if (ctrl & PORT_FORCE_FULL_DUPLEX)
+		*val |= BMCR_FULLDPLX;
+
+	if (speed & PORT_HP_MDIX)
+		*val |= KSZ886X_BMCR_HP_MDIX;
+
+	if (restart & PORT_FORCE_MDIX)
+		*val |= KSZ886X_BMCR_FORCE_MDI;
+
+	if (restart & PORT_AUTO_MDIX_DISABLE)
+		*val |= KSZ886X_BMCR_DISABLE_AUTO_MDIX;
+
+	if (restart & PORT_TX_DISABLE)
+		*val |= KSZ886X_BMCR_DISABLE_TRANSMIT;
+
+	if (restart & PORT_LED_OFF)
+		*val |= KSZ886X_BMCR_DISABLE_LED;
+
+	return 0;
+}
+
 int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
 {
-	u8 restart, speed, ctrl, link;
+	u8 ctrl, link, val1, val2;
 	int processed = true;
 	const u16 *regs;
-	u8 val1, val2;
 	u16 data = 0;
-	u8 p = phy;
+	u16 p = phy;
 	int ret;
 
 	regs = dev->info->regs;
 
 	switch (reg) {
 	case MII_BMCR:
-		ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
+		ret = ksz8_r_phy_bmcr(dev, p, &data);
 		if (ret)
 			return ret;
-
-		ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
-		if (ret)
-			return ret;
-
-		ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
-		if (ret)
-			return ret;
-
-		if (restart & PORT_PHY_LOOPBACK)
-			data |= BMCR_LOOPBACK;
-		if (ctrl & PORT_FORCE_100_MBIT)
-			data |= BMCR_SPEED100;
-		if (ksz_is_ksz88x3(dev)) {
-			if ((ctrl & PORT_AUTO_NEG_ENABLE))
-				data |= BMCR_ANENABLE;
-		} else {
-			if (!(ctrl & PORT_AUTO_NEG_DISABLE))
-				data |= BMCR_ANENABLE;
-		}
-		if (restart & PORT_POWER_DOWN)
-			data |= BMCR_PDOWN;
-		if (restart & PORT_AUTO_NEG_RESTART)
-			data |= BMCR_ANRESTART;
-		if (ctrl & PORT_FORCE_FULL_DUPLEX)
-			data |= BMCR_FULLDPLX;
-		if (speed & PORT_HP_MDIX)
-			data |= KSZ886X_BMCR_HP_MDIX;
-		if (restart & PORT_FORCE_MDIX)
-			data |= KSZ886X_BMCR_FORCE_MDI;
-		if (restart & PORT_AUTO_MDIX_DISABLE)
-			data |= KSZ886X_BMCR_DISABLE_AUTO_MDIX;
-		if (restart & PORT_TX_DISABLE)
-			data |= KSZ886X_BMCR_DISABLE_TRANSMIT;
-		if (restart & PORT_LED_OFF)
-			data |= KSZ886X_BMCR_DISABLE_LED;
 		break;
 	case MII_BMSR:
 		ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
@@ -860,113 +919,168 @@  static int ksz8_w_phy_ctrl(struct ksz_device *dev, int port, u16 val)
 	return ret;
 }
 
-int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
+/**
+ * ksz8_w_phy_bmcr - Translates and writes to the SMI interface from a MIIM PHY
+ *		     Basic mode control register (Reg. 0).
+ * @dev: The KSZ device instance.
+ * @port: The port number to be configured.
+ * @val: The register value to be written.
+ *
+ * This function translates control settings from a MIIM PHY Basic mode control
+ * register into their corresponding hardware register bit values for the SMI
+ * interface.
+ *
+ * MIIM Bit Mapping Comparison between KSZ8794 and KSZ8873
+ * -------------------------------------------------------------------
+ * MIIM Bit                    | KSZ8794 Reg/Bit             | KSZ8873 Reg/Bit
+ * ----------------------------+-----------------------------+----------------
+ * Bit 15 - Soft Reset         | 0xF/4                       | Not supported
+ * Bit 14 - Loopback           | 0xD/0 (MAC), 0xF/7 (PHY)    ~ 0xD/0 (PHY)
+ * Bit 13 - Force 100          | 0xC/6                       = 0xC/6
+ * Bit 12 - AN Enable          | 0xC/7 (reverse logic)       ~ 0xC/7
+ * Bit 11 - Power Down         | 0xD/3                       = 0xD/3
+ * Bit 10 - PHY Isolate        | 0xF/5                       | Not supported
+ * Bit 9 - Restart AN          | 0xD/5                       = 0xD/5
+ * Bit 8 - Force Full-Duplex   | 0xC/5                       = 0xC/5
+ * Bit 7 - Collision Test/Res. | Not supported               | Not supported
+ * Bit 6 - Reserved            | Not supported               | Not supported
+ * Bit 5 - Hp_mdix             | 0x9/7                       ~ 0xF/7
+ * Bit 4 - Force MDI           | 0xD/1                       = 0xD/1
+ * Bit 3 - Disable MDIX        | 0xD/2                       = 0xD/2
+ * Bit 2 - Disable Far-End F.  | ????                        | 0xD/4
+ * Bit 1 - Disable Transmit    | 0xD/6                       = 0xD/6
+ * Bit 0 - Disable LED         | 0xD/7                       = 0xD/7
+ * -------------------------------------------------------------------
+ *
+ * Return: 0 on success, error code on failure.
+ */
+static int ksz8_w_phy_bmcr(struct ksz_device *dev, u16 port, u16 val)
 {
-	u8 restart, speed, ctrl, data;
-	const u16 *regs;
-	u8 p = phy;
+	const u16 *regs = dev->info->regs;
+	u8 restart, ctrl, speed, data;
 	int ret;
 
-	regs = dev->info->regs;
+	/* Do not support PHY reset function. */
+	if (val & BMCR_RESET)
+		return 0;
 
-	switch (reg) {
-	case MII_BMCR:
+	ret = ksz_pread8(dev, port, regs[P_SPEED_STATUS], &speed);
+	if (ret)
+		return ret;
 
-		/* Do not support PHY reset function. */
-		if (val & BMCR_RESET)
-			break;
-		ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
+	data = speed;
+	if (val & KSZ886X_BMCR_HP_MDIX)
+		data |= PORT_HP_MDIX;
+	else
+		data &= ~PORT_HP_MDIX;
+
+	if (data != speed) {
+		ret = ksz_pwrite8(dev, port, regs[P_SPEED_STATUS], data);
 		if (ret)
 			return ret;
+	}
+
+	ret = ksz_pread8(dev, port, regs[P_FORCE_CTRL], &ctrl);
+	if (ret)
+		return ret;
 
-		data = speed;
-		if (val & KSZ886X_BMCR_HP_MDIX)
-			data |= PORT_HP_MDIX;
+	data = ctrl;
+	if (ksz_is_ksz88x3(dev)) {
+		if ((val & BMCR_ANENABLE))
+			data |= PORT_AUTO_NEG_ENABLE;
+		else
+			data &= ~PORT_AUTO_NEG_ENABLE;
+	} else {
+		if (!(val & BMCR_ANENABLE))
+			data |= PORT_AUTO_NEG_DISABLE;
 		else
-			data &= ~PORT_HP_MDIX;
+			data &= ~PORT_AUTO_NEG_DISABLE;
 
-		if (data != speed) {
-			ret = ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data);
-			if (ret)
-				return ret;
-		}
+		/* Fiber port does not support auto-negotiation. */
+		if (dev->ports[port].fiber)
+			data |= PORT_AUTO_NEG_DISABLE;
+	}
+
+	if (val & BMCR_SPEED100)
+		data |= PORT_FORCE_100_MBIT;
+	else
+		data &= ~PORT_FORCE_100_MBIT;
+
+	if (val & BMCR_FULLDPLX)
+		data |= PORT_FORCE_FULL_DUPLEX;
+	else
+		data &= ~PORT_FORCE_FULL_DUPLEX;
 
-		ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
+	if (data != ctrl) {
+		ret = ksz_pwrite8(dev, port, regs[P_FORCE_CTRL], data);
 		if (ret)
 			return ret;
+	}
 
-		data = ctrl;
-		if (ksz_is_ksz88x3(dev)) {
-			if ((val & BMCR_ANENABLE))
-				data |= PORT_AUTO_NEG_ENABLE;
-			else
-				data &= ~PORT_AUTO_NEG_ENABLE;
-		} else {
-			if (!(val & BMCR_ANENABLE))
-				data |= PORT_AUTO_NEG_DISABLE;
-			else
-				data &= ~PORT_AUTO_NEG_DISABLE;
-
-			/* Fiber port does not support auto-negotiation. */
-			if (dev->ports[p].fiber)
-				data |= PORT_AUTO_NEG_DISABLE;
-		}
+	ret = ksz_pread8(dev, port, regs[P_NEG_RESTART_CTRL], &restart);
+	if (ret)
+		return ret;
 
-		if (val & BMCR_SPEED100)
-			data |= PORT_FORCE_100_MBIT;
-		else
-			data &= ~PORT_FORCE_100_MBIT;
-		if (val & BMCR_FULLDPLX)
-			data |= PORT_FORCE_FULL_DUPLEX;
-		else
-			data &= ~PORT_FORCE_FULL_DUPLEX;
+	data = restart;
+	if (val & KSZ886X_BMCR_DISABLE_LED)
+		data |= PORT_LED_OFF;
+	else
+		data &= ~PORT_LED_OFF;
 
-		if (data != ctrl) {
-			ret = ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data);
-			if (ret)
-				return ret;
-		}
+	if (val & KSZ886X_BMCR_DISABLE_TRANSMIT)
+		data |= PORT_TX_DISABLE;
+	else
+		data &= ~PORT_TX_DISABLE;
 
-		ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
+	if (val & BMCR_ANRESTART)
+		data |= PORT_AUTO_NEG_RESTART;
+	else
+		data &= ~(PORT_AUTO_NEG_RESTART);
+
+	if (val & BMCR_PDOWN)
+		data |= PORT_POWER_DOWN;
+	else
+		data &= ~PORT_POWER_DOWN;
+
+	if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX)
+		data |= PORT_AUTO_MDIX_DISABLE;
+	else
+		data &= ~PORT_AUTO_MDIX_DISABLE;
+
+	if (val & KSZ886X_BMCR_FORCE_MDI)
+		data |= PORT_FORCE_MDIX;
+	else
+		data &= ~PORT_FORCE_MDIX;
+
+	if (val & BMCR_LOOPBACK)
+		data |= PORT_PHY_LOOPBACK;
+	else
+		data &= ~PORT_PHY_LOOPBACK;
+
+	if (data != restart) {
+		ret = ksz_pwrite8(dev, port, regs[P_NEG_RESTART_CTRL],
+				  data);
 		if (ret)
 			return ret;
+	}
 
-		data = restart;
-		if (val & KSZ886X_BMCR_DISABLE_LED)
-			data |= PORT_LED_OFF;
-		else
-			data &= ~PORT_LED_OFF;
-		if (val & KSZ886X_BMCR_DISABLE_TRANSMIT)
-			data |= PORT_TX_DISABLE;
-		else
-			data &= ~PORT_TX_DISABLE;
-		if (val & BMCR_ANRESTART)
-			data |= PORT_AUTO_NEG_RESTART;
-		else
-			data &= ~(PORT_AUTO_NEG_RESTART);
-		if (val & BMCR_PDOWN)
-			data |= PORT_POWER_DOWN;
-		else
-			data &= ~PORT_POWER_DOWN;
-		if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX)
-			data |= PORT_AUTO_MDIX_DISABLE;
-		else
-			data &= ~PORT_AUTO_MDIX_DISABLE;
-		if (val & KSZ886X_BMCR_FORCE_MDI)
-			data |= PORT_FORCE_MDIX;
-		else
-			data &= ~PORT_FORCE_MDIX;
-		if (val & BMCR_LOOPBACK)
-			data |= PORT_PHY_LOOPBACK;
-		else
-			data &= ~PORT_PHY_LOOPBACK;
+	return 0;
+}
 
-		if (data != restart) {
-			ret = ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL],
-					  data);
-			if (ret)
-				return ret;
-		}
+int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
+{
+	const u16 *regs;
+	u8 ctrl, data;
+	u16 p = phy;
+	int ret;
+
+	regs = dev->info->regs;
+
+	switch (reg) {
+	case MII_BMCR:
+		ret = ksz8_w_phy_bmcr(dev, p, val);
+		if (ret)
+			return ret;
 		break;
 	case MII_ADVERTISE:
 		ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);