From patchwork Wed Jan 24 12:33:12 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 13529174 X-Patchwork-Delegate: kuba@kernel.org Received: from metis.whiteo.stw.pengutronix.de (metis.whiteo.stw.pengutronix.de [185.203.201.7]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B233C77630 for ; Wed, 24 Jan 2024 12:33:25 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.203.201.7 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706099607; cv=none; b=TJykS3lxzrHBpinOqfRdfO9dFnPPxH+ykAsrLokPvPDVYmPjXG07dFBGAi2YMRCRkgO9iO/slJYFYckuvn3sDmh27dabDUPgbE2hMDda5KfQTT3Q6o2Rx9szywX5/rzDHrB5lKdojnOgKoFQUehgSOF/7H4CWeXwiv5RRjA7poo= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706099607; c=relaxed/simple; bh=KND9IeP4Kc4lwKsv8pqScytSGRZMkaoxARxNe2DkZms=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=CW99/iZXBZ5Qn7SvbzVfMCcOPdc1yISAF+/5sl5UTBjIXNAGEmxYU6Fjo3LlHwiPpY7Ek1VrUL3wv0Bd6aR/XxV4/KhbVPdFWl8hm6fM3za06DiLS/aFsMVF25oT+sowCKBea2oT30cXD6hk6padCVe+07fsYcRLJxlcdNQAHMY= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=pengutronix.de; spf=pass smtp.mailfrom=pengutronix.de; arc=none smtp.client-ip=185.203.201.7 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=pengutronix.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=pengutronix.de Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1rScRR-0000Hz-6l; Wed, 24 Jan 2024 13:33:17 +0100 Received: from [2a0a:edc0:0:1101:1d::ac] (helo=dude04.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1rScRP-0023bQ-95; Wed, 24 Jan 2024 13:33:15 +0100 Received: from ore by dude04.red.stw.pengutronix.de with local (Exim 4.96) (envelope-from ) id 1rScRP-0035AV-0f; Wed, 24 Jan 2024 13:33:15 +0100 From: Oleksij Rempel To: "David S. Miller" , Andrew Lunn , Eric Dumazet , Florian Fainelli , Jakub Kicinski , Paolo Abeni , Vladimir Oltean , Woojung Huh , Arun Ramadoss Cc: Oleksij Rempel , Vladimir Oltean , kernel@pengutronix.de, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, UNGLinuxDriver@microchip.com, =?utf-8?q?S=C3=B8ren_Andersen?= Subject: [PATCH net-next v4 1/3] net: dsa: microchip: ksz8: move BMCR specific code to separate function Date: Wed, 24 Jan 2024 13:33:12 +0100 Message-Id: <20240124123314.734815-2-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20240124123314.734815-1-o.rempel@pengutronix.de> References: <20240124123314.734815-1-o.rempel@pengutronix.de> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2a0a:edc0:0:c01:1d::a2 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.whiteo.stw.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org Isolate the Basic Mode Control Register (BMCR) operations in the ksz8795 driver by moving the BMCR-related code segments from the ksz8_r_phy() and ksz8_w_phy() functions to newly created ksz8_r_phy_bmcr() and ksz8_w_phy_bmcr() functions. Signed-off-by: Oleksij Rempel Reviewed-by: Vladimir Oltean Acked-by: Arun Ramadoss --- drivers/net/dsa/microchip/ksz8795.c | 366 ++++++++++++++++++---------- 1 file changed, 240 insertions(+), 126 deletions(-) diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index 61b71bcfe396..1269dde832bd 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -676,59 +676,118 @@ static int ksz8_r_phy_ctrl(struct ksz_device *dev, int port, u16 *val) return 0; } +/** + * ksz8_r_phy_bmcr - Translates and reads from the SMI interface to a MIIM PHY + * Basic mode control register (Reg. 0). + * @dev: The KSZ device instance. + * @port: The port number to be read. + * @val: The value read from the SMI interface. + * + * This function reads the SMI interface and translates the hardware register + * bit values into their corresponding control settings for a MIIM PHY Basic + * mode control register. + * + * MIIM Bit Mapping Comparison between KSZ8794 and KSZ8873 + * ------------------------------------------------------------------- + * MIIM Bit | KSZ8794 Reg/Bit | KSZ8873 Reg/Bit + * ----------------------------+-----------------------------+---------------- + * Bit 15 - Soft Reset | 0xF/4 | Not supported + * Bit 14 - Loopback | 0xD/0 (MAC), 0xF/7 (PHY) ~ 0xD/0 (PHY) + * Bit 13 - Force 100 | 0xC/6 = 0xC/6 + * Bit 12 - AN Enable | 0xC/7 (reverse logic) ~ 0xC/7 + * Bit 11 - Power Down | 0xD/3 = 0xD/3 + * Bit 10 - PHY Isolate | 0xF/5 | Not supported + * Bit 9 - Restart AN | 0xD/5 = 0xD/5 + * Bit 8 - Force Full-Duplex | 0xC/5 = 0xC/5 + * Bit 7 - Collision Test/Res. | Not supported | Not supported + * Bit 6 - Reserved | Not supported | Not supported + * Bit 5 - Hp_mdix | 0x9/7 ~ 0xF/7 + * Bit 4 - Force MDI | 0xD/1 = 0xD/1 + * Bit 3 - Disable MDIX | 0xD/2 = 0xD/2 + * Bit 2 - Disable Far-End F. | ???? | 0xD/4 + * Bit 1 - Disable Transmit | 0xD/6 = 0xD/6 + * Bit 0 - Disable LED | 0xD/7 = 0xD/7 + * ------------------------------------------------------------------- + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_r_phy_bmcr(struct ksz_device *dev, u16 port, u16 *val) +{ + const u16 *regs = dev->info->regs; + u8 restart, speed, ctrl; + int ret; + + *val = 0; + + ret = ksz_pread8(dev, port, regs[P_NEG_RESTART_CTRL], &restart); + if (ret) + return ret; + + ret = ksz_pread8(dev, port, regs[P_SPEED_STATUS], &speed); + if (ret) + return ret; + + ret = ksz_pread8(dev, port, regs[P_FORCE_CTRL], &ctrl); + if (ret) + return ret; + + if (restart & PORT_PHY_LOOPBACK) + *val |= BMCR_LOOPBACK; + + if (ctrl & PORT_FORCE_100_MBIT) + *val |= BMCR_SPEED100; + + if (ksz_is_ksz88x3(dev)) { + if ((ctrl & PORT_AUTO_NEG_ENABLE)) + *val |= BMCR_ANENABLE; + } else { + if (!(ctrl & PORT_AUTO_NEG_DISABLE)) + *val |= BMCR_ANENABLE; + } + + if (restart & PORT_POWER_DOWN) + *val |= BMCR_PDOWN; + + if (restart & PORT_AUTO_NEG_RESTART) + *val |= BMCR_ANRESTART; + + if (ctrl & PORT_FORCE_FULL_DUPLEX) + *val |= BMCR_FULLDPLX; + + if (speed & PORT_HP_MDIX) + *val |= KSZ886X_BMCR_HP_MDIX; + + if (restart & PORT_FORCE_MDIX) + *val |= KSZ886X_BMCR_FORCE_MDI; + + if (restart & PORT_AUTO_MDIX_DISABLE) + *val |= KSZ886X_BMCR_DISABLE_AUTO_MDIX; + + if (restart & PORT_TX_DISABLE) + *val |= KSZ886X_BMCR_DISABLE_TRANSMIT; + + if (restart & PORT_LED_OFF) + *val |= KSZ886X_BMCR_DISABLE_LED; + + return 0; +} + int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) { - u8 restart, speed, ctrl, link; + u8 ctrl, link, val1, val2; int processed = true; const u16 *regs; - u8 val1, val2; u16 data = 0; - u8 p = phy; + u16 p = phy; int ret; regs = dev->info->regs; switch (reg) { case MII_BMCR: - ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart); + ret = ksz8_r_phy_bmcr(dev, p, &data); if (ret) return ret; - - ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed); - if (ret) - return ret; - - ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl); - if (ret) - return ret; - - if (restart & PORT_PHY_LOOPBACK) - data |= BMCR_LOOPBACK; - if (ctrl & PORT_FORCE_100_MBIT) - data |= BMCR_SPEED100; - if (ksz_is_ksz88x3(dev)) { - if ((ctrl & PORT_AUTO_NEG_ENABLE)) - data |= BMCR_ANENABLE; - } else { - if (!(ctrl & PORT_AUTO_NEG_DISABLE)) - data |= BMCR_ANENABLE; - } - if (restart & PORT_POWER_DOWN) - data |= BMCR_PDOWN; - if (restart & PORT_AUTO_NEG_RESTART) - data |= BMCR_ANRESTART; - if (ctrl & PORT_FORCE_FULL_DUPLEX) - data |= BMCR_FULLDPLX; - if (speed & PORT_HP_MDIX) - data |= KSZ886X_BMCR_HP_MDIX; - if (restart & PORT_FORCE_MDIX) - data |= KSZ886X_BMCR_FORCE_MDI; - if (restart & PORT_AUTO_MDIX_DISABLE) - data |= KSZ886X_BMCR_DISABLE_AUTO_MDIX; - if (restart & PORT_TX_DISABLE) - data |= KSZ886X_BMCR_DISABLE_TRANSMIT; - if (restart & PORT_LED_OFF) - data |= KSZ886X_BMCR_DISABLE_LED; break; case MII_BMSR: ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link); @@ -860,113 +919,168 @@ static int ksz8_w_phy_ctrl(struct ksz_device *dev, int port, u16 val) return ret; } -int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +/** + * ksz8_w_phy_bmcr - Translates and writes to the SMI interface from a MIIM PHY + * Basic mode control register (Reg. 0). + * @dev: The KSZ device instance. + * @port: The port number to be configured. + * @val: The register value to be written. + * + * This function translates control settings from a MIIM PHY Basic mode control + * register into their corresponding hardware register bit values for the SMI + * interface. + * + * MIIM Bit Mapping Comparison between KSZ8794 and KSZ8873 + * ------------------------------------------------------------------- + * MIIM Bit | KSZ8794 Reg/Bit | KSZ8873 Reg/Bit + * ----------------------------+-----------------------------+---------------- + * Bit 15 - Soft Reset | 0xF/4 | Not supported + * Bit 14 - Loopback | 0xD/0 (MAC), 0xF/7 (PHY) ~ 0xD/0 (PHY) + * Bit 13 - Force 100 | 0xC/6 = 0xC/6 + * Bit 12 - AN Enable | 0xC/7 (reverse logic) ~ 0xC/7 + * Bit 11 - Power Down | 0xD/3 = 0xD/3 + * Bit 10 - PHY Isolate | 0xF/5 | Not supported + * Bit 9 - Restart AN | 0xD/5 = 0xD/5 + * Bit 8 - Force Full-Duplex | 0xC/5 = 0xC/5 + * Bit 7 - Collision Test/Res. | Not supported | Not supported + * Bit 6 - Reserved | Not supported | Not supported + * Bit 5 - Hp_mdix | 0x9/7 ~ 0xF/7 + * Bit 4 - Force MDI | 0xD/1 = 0xD/1 + * Bit 3 - Disable MDIX | 0xD/2 = 0xD/2 + * Bit 2 - Disable Far-End F. | ???? | 0xD/4 + * Bit 1 - Disable Transmit | 0xD/6 = 0xD/6 + * Bit 0 - Disable LED | 0xD/7 = 0xD/7 + * ------------------------------------------------------------------- + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_w_phy_bmcr(struct ksz_device *dev, u16 port, u16 val) { - u8 restart, speed, ctrl, data; - const u16 *regs; - u8 p = phy; + const u16 *regs = dev->info->regs; + u8 restart, ctrl, speed, data; int ret; - regs = dev->info->regs; + /* Do not support PHY reset function. */ + if (val & BMCR_RESET) + return 0; - switch (reg) { - case MII_BMCR: + ret = ksz_pread8(dev, port, regs[P_SPEED_STATUS], &speed); + if (ret) + return ret; - /* Do not support PHY reset function. */ - if (val & BMCR_RESET) - break; - ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed); + data = speed; + if (val & KSZ886X_BMCR_HP_MDIX) + data |= PORT_HP_MDIX; + else + data &= ~PORT_HP_MDIX; + + if (data != speed) { + ret = ksz_pwrite8(dev, port, regs[P_SPEED_STATUS], data); if (ret) return ret; + } + + ret = ksz_pread8(dev, port, regs[P_FORCE_CTRL], &ctrl); + if (ret) + return ret; - data = speed; - if (val & KSZ886X_BMCR_HP_MDIX) - data |= PORT_HP_MDIX; + data = ctrl; + if (ksz_is_ksz88x3(dev)) { + if ((val & BMCR_ANENABLE)) + data |= PORT_AUTO_NEG_ENABLE; + else + data &= ~PORT_AUTO_NEG_ENABLE; + } else { + if (!(val & BMCR_ANENABLE)) + data |= PORT_AUTO_NEG_DISABLE; else - data &= ~PORT_HP_MDIX; + data &= ~PORT_AUTO_NEG_DISABLE; - if (data != speed) { - ret = ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data); - if (ret) - return ret; - } + /* Fiber port does not support auto-negotiation. */ + if (dev->ports[port].fiber) + data |= PORT_AUTO_NEG_DISABLE; + } + + if (val & BMCR_SPEED100) + data |= PORT_FORCE_100_MBIT; + else + data &= ~PORT_FORCE_100_MBIT; + + if (val & BMCR_FULLDPLX) + data |= PORT_FORCE_FULL_DUPLEX; + else + data &= ~PORT_FORCE_FULL_DUPLEX; - ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl); + if (data != ctrl) { + ret = ksz_pwrite8(dev, port, regs[P_FORCE_CTRL], data); if (ret) return ret; + } - data = ctrl; - if (ksz_is_ksz88x3(dev)) { - if ((val & BMCR_ANENABLE)) - data |= PORT_AUTO_NEG_ENABLE; - else - data &= ~PORT_AUTO_NEG_ENABLE; - } else { - if (!(val & BMCR_ANENABLE)) - data |= PORT_AUTO_NEG_DISABLE; - else - data &= ~PORT_AUTO_NEG_DISABLE; - - /* Fiber port does not support auto-negotiation. */ - if (dev->ports[p].fiber) - data |= PORT_AUTO_NEG_DISABLE; - } + ret = ksz_pread8(dev, port, regs[P_NEG_RESTART_CTRL], &restart); + if (ret) + return ret; - if (val & BMCR_SPEED100) - data |= PORT_FORCE_100_MBIT; - else - data &= ~PORT_FORCE_100_MBIT; - if (val & BMCR_FULLDPLX) - data |= PORT_FORCE_FULL_DUPLEX; - else - data &= ~PORT_FORCE_FULL_DUPLEX; + data = restart; + if (val & KSZ886X_BMCR_DISABLE_LED) + data |= PORT_LED_OFF; + else + data &= ~PORT_LED_OFF; - if (data != ctrl) { - ret = ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data); - if (ret) - return ret; - } + if (val & KSZ886X_BMCR_DISABLE_TRANSMIT) + data |= PORT_TX_DISABLE; + else + data &= ~PORT_TX_DISABLE; - ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart); + if (val & BMCR_ANRESTART) + data |= PORT_AUTO_NEG_RESTART; + else + data &= ~(PORT_AUTO_NEG_RESTART); + + if (val & BMCR_PDOWN) + data |= PORT_POWER_DOWN; + else + data &= ~PORT_POWER_DOWN; + + if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX) + data |= PORT_AUTO_MDIX_DISABLE; + else + data &= ~PORT_AUTO_MDIX_DISABLE; + + if (val & KSZ886X_BMCR_FORCE_MDI) + data |= PORT_FORCE_MDIX; + else + data &= ~PORT_FORCE_MDIX; + + if (val & BMCR_LOOPBACK) + data |= PORT_PHY_LOOPBACK; + else + data &= ~PORT_PHY_LOOPBACK; + + if (data != restart) { + ret = ksz_pwrite8(dev, port, regs[P_NEG_RESTART_CTRL], + data); if (ret) return ret; + } - data = restart; - if (val & KSZ886X_BMCR_DISABLE_LED) - data |= PORT_LED_OFF; - else - data &= ~PORT_LED_OFF; - if (val & KSZ886X_BMCR_DISABLE_TRANSMIT) - data |= PORT_TX_DISABLE; - else - data &= ~PORT_TX_DISABLE; - if (val & BMCR_ANRESTART) - data |= PORT_AUTO_NEG_RESTART; - else - data &= ~(PORT_AUTO_NEG_RESTART); - if (val & BMCR_PDOWN) - data |= PORT_POWER_DOWN; - else - data &= ~PORT_POWER_DOWN; - if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX) - data |= PORT_AUTO_MDIX_DISABLE; - else - data &= ~PORT_AUTO_MDIX_DISABLE; - if (val & KSZ886X_BMCR_FORCE_MDI) - data |= PORT_FORCE_MDIX; - else - data &= ~PORT_FORCE_MDIX; - if (val & BMCR_LOOPBACK) - data |= PORT_PHY_LOOPBACK; - else - data &= ~PORT_PHY_LOOPBACK; + return 0; +} - if (data != restart) { - ret = ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL], - data); - if (ret) - return ret; - } +int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +{ + const u16 *regs; + u8 ctrl, data; + u16 p = phy; + int ret; + + regs = dev->info->regs; + + switch (reg) { + case MII_BMCR: + ret = ksz8_w_phy_bmcr(dev, p, val); + if (ret) + return ret; break; case MII_ADVERTISE: ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);