| Message ID | 20240126130503.14197-3-jedrzej.jagielski@intel.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [iwl-next,v4,1/3] ixgbe: Convert ret val type from s32 to int | expand |
On Fri, Jan 26, 2024 at 02:05:03PM +0100, Jedrzej Jagielski wrote: > Converting s32 functions to regular int in the previous patch of the series > caused triggering smatch warnings about missing error code. > > New smatch warnings: > drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:2884 ixgbe_get_lcd_t_x550em() warn: missing error code? 'status' > drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:3130 ixgbe_enter_lplu_t_x550em() warn: missing error code? 'status' > > Old smatch warnings: > drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:2890 ixgbe_get_lcd_t_x550em() warn: missing error code? 'status' > > Fix it by clearly stating returning error code as 0. > > Reported-by: kernel test robot <lkp@intel.com> > Reported-by: Dan Carpenter <dan.carpenter@linaro.org> > Closes: https://lore.kernel.org/r/202401041701.6QKTsZmx-lkp@intel.com/ > Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Thanks, nice to see this cleaned up. Reviewed-by: Simon Horman <horms@kernel.org>
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index efce4b231493..bee1d2f554d3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -2883,17 +2883,17 @@ static int ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, /* If link partner advertised 1G, return 1G */ if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) { *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL; - return status; + return 0; } /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */ if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) || (word & NVM_INIT_CTRL_3_D10GMP_PORT0)) - return status; + return 0; /* Link partner not capable of lower speeds, return 10G */ *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL; - return status; + return 0; } /** @@ -3129,7 +3129,7 @@ static int ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) || ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) && (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL))) - return status; + return 0; /* Clear AN completed indication */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM,
Converting s32 functions to regular int in the previous patch of the series caused triggering smatch warnings about missing error code. New smatch warnings: drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:2884 ixgbe_get_lcd_t_x550em() warn: missing error code? 'status' drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:3130 ixgbe_enter_lplu_t_x550em() warn: missing error code? 'status' Old smatch warnings: drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:2890 ixgbe_get_lcd_t_x550em() warn: missing error code? 'status' Fix it by clearly stating returning error code as 0. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202401041701.6QKTsZmx-lkp@intel.com/ Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> --- drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)