@@ -2023,6 +2023,53 @@ static inline int ethtool_validate_duplex(__u8 duplex)
#define IPV4_FLOW 0x10 /* hash only */
#define IPV6_FLOW 0x11 /* hash only */
#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
+
+/* Used for GTP-U IPv4 and IPv6.
+ * The format of GTP packets only includes
+ * elements such as TEID and GTP version.
+ * It is primarily intended for data communication of the UE.
+ */
+#define GTPU_V4_FLOW 0x13 /* hash only */
+#define GTPU_V6_FLOW 0x14 /* hash only */
+
+/* Use for GTP-C IPv4 and v6.
+ * The format of these GTP packets does not include TEID.
+ * Primarily expected to be used for communication
+ * to create sessions for UE data communication,
+ * commonly referred to as CSR (Create Session Request).
+ */
+#define GTPC_V4_FLOW 0x15 /* hash only */
+#define GTPC_V6_FLOW 0x16 /* hash only */
+
+/* Use for GTP-C IPv4 and v6.
+ * Unlike GTPC_V4_FLOW, the format of these GTP packets includes TEID.
+ * After session creation, it becomes this packet.
+ * This is mainly used for requests to realize UE handover.
+ */
+#define GTPC_TEID_V4_FLOW 0x17 /* hash only */
+#define GTPC_TEID_V6_FLOW 0x18 /* hash only */
+
+/* Use for GTP-U and extended headers for the PSC (PDU Session Container).
+ * The format of these GTP packets includes TEID and QFI.
+ * In 5G communication using UPF (User Plane Function),
+ * data communication with this extended header is performed.
+ */
+#define GTPU_EH_V4_FLOW 0x19 /* hash only */
+#define GTPU_EH_V6_FLOW 0x1a /* hash only */
+
+/* Use for GTP-U IPv4 and v6 PSC (PDU Session Container) extended headers.
+ * This differs from GTPU_EH_V(4|6)_FLOW in that it is distinguished by
+ * UL/DL included in the PSC.
+ * There are differences in the data included based on Downlink/Uplink,
+ * and can be used to distinguish packets.
+ * The functions described so far are useful when you want to
+ * handle communication from the mobile network in UPF, PGW, etc.
+ */
+#define GTPU_UL_V4_FLOW 0x1b /* hash only */
+#define GTPU_UL_V6_FLOW 0x1c /* hash only */
+#define GTPU_DL_V4_FLOW 0x1d /* hash only */
+#define GTPU_DL_V6_FLOW 0x1e /* hash only */
+
/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
#define FLOW_EXT 0x80000000
#define FLOW_MAC_EXT 0x40000000
@@ -2037,6 +2084,7 @@ static inline int ethtool_validate_duplex(__u8 duplex)
#define RXH_IP_DST (1 << 5)
#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */
#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define RXH_GTP_TEID (1 << 8) /* teid in case of GTP */
#define RXH_DISCARD (1 << 31)
#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
This is a patch that enables RSS functionality for GTP packets using ethtool. A user can include TEID and make RSS work for GTP-U over IPv4 by doing the following:`ethtool -N ens3 rx-flow-hash gtpu4 sde` In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d. gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does not include a TEID. gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that includes a TEID. gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios. gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6. gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended header includes Uplink, applicable to both IPv4 and IPv6. gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink, for both IPv4 and IPv6. GTP generates a flow that includes an ID called TEID to identify the tunnel. This tunnel is created for each UE (User Equipment).By performing RSS based on this flow, it is possible to apply RSS for each communication unit from the UE. Without this, RSS would only be effective within the range of IP addresses. For instance, the PGW can only perform RSS within the IP range of the SGW. Problematic from a load distribution perspective, especially if there's a bias in the terminals connected to a particular base station.This case can be solved by using this patch. Signed-off-by: Takeru Hayasaka <hayatake396@gmail.com> --- v2->v3: Based on Harald-san's review, I added documentation and comments to ethtool.h and ice.rst. v3->v4: Based on Marcin-san's review, I added the missing code for GTPC and GTPC_TEID, and revised the documentation and comments. v4->v5: Based on Marcin-san's review, I fixed rename and wrong code regarding GTPC v5->v6: Based on Marcin-san's review, Undoing the addition of unnecessary blank lines.Minor fixes. v6->v7 Based on Jakub-san's review, Split the patch. include/uapi/linux/ethtool.h | 48 ++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+)