| Message ID | 20240213180228.15859-1-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net-next] net: phy: aquantia: add AQR113 PHY ID | expand |
On Tue, Feb 13, 2024 at 07:02:26PM +0100, Christian Marangi wrote: > Add Aquantia AQR113 PHY ID. Aquantia AQR113 is just a chip size variant of > the already supported AQR133C where the only difference is the PHY ID > and the hw chip size. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
Hi, On Wed, 2024-02-14 at 19:05 +0100, Andrew Lunn wrote: > On Tue, Feb 13, 2024 at 07:02:26PM +0100, Christian Marangi wrote: > > Add Aquantia AQR113 PHY ID. Aquantia AQR113 is just a chip size variant of > > the already supported AQR133C where the only difference is the PHY ID > > and the hw chip size. > > > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > > Reviewed-by: Andrew Lunn <andrew@lunn.ch> This does not apply cleanly anymore after "net: phy: aquantia: add AQR111 and AQR111B0 PHY ID". Could you please rebase it? Thanks! Paolo
On Thu, Feb 15, 2024 at 01:35:40PM +0100, Paolo Abeni wrote: > Hi, > > On Wed, 2024-02-14 at 19:05 +0100, Andrew Lunn wrote: > > On Tue, Feb 13, 2024 at 07:02:26PM +0100, Christian Marangi wrote: > > > Add Aquantia AQR113 PHY ID. Aquantia AQR113 is just a chip size variant of > > > the already supported AQR133C where the only difference is the PHY ID > > > and the hw chip size. > > > > > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > > > > Reviewed-by: Andrew Lunn <andrew@lunn.ch> > > This does not apply cleanly anymore after "net: phy: aquantia: add > AQR111 and AQR111B0 PHY ID". Could you please rebase it? > Sure, sent v2 and thanks for checking this.
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c index 97a2fafa15ca..aba3a52af11d 100644 --- a/drivers/net/phy/aquantia/aquantia_main.c +++ b/drivers/net/phy/aquantia/aquantia_main.c @@ -24,6 +24,7 @@ #define PHY_ID_AQR405 0x03a1b4b0 #define PHY_ID_AQR112 0x03a1b662 #define PHY_ID_AQR412 0x03a1b712 +#define PHY_ID_AQR113 0x31c31c40 #define PHY_ID_AQR113C 0x31c31c12 #define MDIO_PHYXS_VEND_IF_STATUS 0xe812 @@ -863,6 +864,25 @@ static struct phy_driver aqr_driver[] = { .get_stats = aqr107_get_stats, .link_change_notify = aqr107_link_change_notify, }, +{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR113), + .name = "Aquantia AQR113", + .probe = aqr107_probe, + .get_rate_matching = aqr107_get_rate_matching, + .config_init = aqr113c_config_init, + .config_aneg = aqr_config_aneg, + .config_intr = aqr_config_intr, + .handle_interrupt = aqr_handle_interrupt, + .read_status = aqr107_read_status, + .get_tunable = aqr107_get_tunable, + .set_tunable = aqr107_set_tunable, + .suspend = aqr107_suspend, + .resume = aqr107_resume, + .get_sset_count = aqr107_get_sset_count, + .get_strings = aqr107_get_strings, + .get_stats = aqr107_get_stats, + .link_change_notify = aqr107_link_change_notify, +}, { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C), .name = "Aquantia AQR113C", @@ -896,6 +916,7 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR412) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, { } };
Add Aquantia AQR113 PHY ID. Aquantia AQR113 is just a chip size variant of the already supported AQR133C where the only difference is the PHY ID and the hw chip size. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- drivers/net/phy/aquantia/aquantia_main.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)