| Message ID | 20240214-hid-bpf-sleepable-v2-2-5756b054724d@kernel.org (mailing list archive) |
|---|---|
| State | RFC |
| Delegated to: | BPF |
| Headers | show |
| Series | allow HID-BPF to do device IOs | expand |
On Feb 14 2024, Benjamin Tissoires wrote: > They are implemented as a kfunc, which means a little bit of tweaks in > the verifier. > > Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> > > --- > > changes in v2 (compared to the one attaches to v1 0/9): > - make use of a kfunc > - add a (non-used) BPF_F_TIMER_SLEEPABLE > - the callback is *not* called, it makes the kernel crashes > --- > include/linux/bpf_verifier.h | 2 + > include/uapi/linux/bpf.h | 12 +++++ > kernel/bpf/helpers.c | 105 ++++++++++++++++++++++++++++++++++++++++--- > kernel/bpf/verifier.c | 72 ++++++++++++++++++++++++++--- > 4 files changed, 180 insertions(+), 11 deletions(-) > > diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h > index 84365e6dd85d..789ef5fec547 100644 > --- a/include/linux/bpf_verifier.h > +++ b/include/linux/bpf_verifier.h > @@ -426,6 +426,7 @@ struct bpf_verifier_state { > * while they are still in use. > */ > bool used_as_loop_entry; > + bool in_sleepable; > > /* first and last insn idx of this verifier state */ > u32 first_insn_idx; > @@ -626,6 +627,7 @@ struct bpf_subprog_info { > bool is_async_cb: 1; > bool is_exception_cb: 1; > bool args_cached: 1; > + bool is_sleepable: 1; > > u8 arg_cnt; > struct bpf_subprog_arg_info args[MAX_BPF_FUNC_REG_ARGS]; > diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h > index d96708380e52..0838597028a9 100644 > --- a/include/uapi/linux/bpf.h > +++ b/include/uapi/linux/bpf.h > @@ -7427,6 +7427,18 @@ enum { > BPF_F_TIMER_CPU_PIN = (1ULL << 1), > }; > > +/* Extra flags to control bpf_timer_init() behaviour, in addition to CLOCK_*. > + * - BPF_F_TIMER_SLEEPABLE: Timer will run in a workqueue in a sleepable > + * context. > + */ > +enum { > + /* CLOCK_* are using bits 0 to 3 */ > + BPF_F_TIMER_SLEEPABLE = (1ULL << 4), > + __MAX_BPF_F_TIMER_INIT, > +}; > + > +#define MAX_BPF_F_TIMER_INIT __MAX_BPF_F_TIMER_INIT > + > /* BPF numbers iterator state */ > struct bpf_iter_num { > /* opaque iterator state; having __u64 here allows to preserve correct > diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c > index 4db1c658254c..2dbc09ce841a 100644 > --- a/kernel/bpf/helpers.c > +++ b/kernel/bpf/helpers.c > @@ -1097,9 +1097,11 @@ const struct bpf_func_proto bpf_snprintf_proto = { > */ > struct bpf_hrtimer { > struct hrtimer timer; > + struct work_struct work; > struct bpf_map *map; > struct bpf_prog *prog; > void __rcu *callback_fn; > + void __rcu *sleepable_cb_fn; > void *value; > }; > > @@ -1113,18 +1115,59 @@ struct bpf_timer_kern { > struct bpf_spin_lock lock; > } __attribute__((aligned(8))); > > +static void bpf_timer_work_cb(struct work_struct *work) > +{ > + struct bpf_hrtimer *t = container_of(work, struct bpf_hrtimer, work); > + struct bpf_map *map = t->map; > + void *value = t->value; > + bpf_callback_t callback_fn; > + void *key; > + u32 idx; > + > + BTF_TYPE_EMIT(struct bpf_timer); > + > + rcu_read_lock(); > + callback_fn = rcu_dereference(t->sleepable_cb_fn); > + rcu_read_unlock(); > + if (!callback_fn) > + return; > + > + /* FIXME: do we need any locking? */ > + if (map->map_type == BPF_MAP_TYPE_ARRAY) { > + struct bpf_array *array = container_of(map, struct bpf_array, map); > + > + /* compute the key */ > + idx = ((char *)value - array->value) / array->elem_size; > + key = &idx; > + } else { /* hash or lru */ > + key = value - round_up(map->key_size, 8); > + } > + > + /* FIXME: this crashes the system with > + * BUG: kernel NULL pointer dereference, address: 000000000000000b > + */ > + /* callback_fn((u64)(long)map, (u64)(long)key, (u64)(long)value, 0, 0); */ I've found an interesting side effect here. If I uncomment the line above, I get the following dumpstack: [ 5.375257] BUG: kernel NULL pointer dereference, address: 000000000000000b [ 5.376587] #PF: supervisor instruction fetch in kernel mode [ 5.376932] #PF: error_code(0x0010) - not-present page [ 5.377249] PGD 1016e6067 P4D 1016e6067 PUD 1016e5067 PMD 0 [ 5.377602] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 5.377876] CPU: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.8.0-rc2-gd2c1e1837606-dirty #285 [ 5.378378] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 [ 5.378913] Workqueue: events bpf_timer_work_cb [ 5.379197] RIP: 0010:0xb [ 5.379369] Code: Unable to access opcode bytes at 0xffffffffffffffe1. [ 5.379768] RSP: 0018:ffffa5300005be10 EFLAGS: 00010246 [ 5.380088] RAX: 0000000000000068 RBX: 000000000000000b RCX: 0000000000000000 [ 5.380523] RDX: ffffa530012a5ff0 RSI: ffffa530012a5fe8 RDI: ffff915ec2bad000 [ 5.380947] RBP: ffff915ec2bad000 R08: 0000000000000000 R09: 0000000000000001 [ 5.381368] R10: 0000000000000000 R11: ffffffff9166f820 R12: ffffa530012a5ff0 [ 5.381793] R13: ffffa530012a5fe8 R14: ffff915ec0073005 R15: ffffffff900aea8a [ 5.382213] FS: 0000000000000000(0000) GS:ffff915efbc00000(0000) knlGS:0000000000000000 [ 5.382691] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.383036] CR2: ffffffffffffffe1 CR3: 000000010761e003 CR4: 0000000000770ef0 [ 5.383460] PKRU: 55555554 [ 5.383643] Call Trace: [ 5.383831] <TASK> [ 5.383994] ? __die+0x23/0x70 [ 5.384228] ? page_fault_oops+0x181/0x4a0 [ 5.384541] ? exc_page_fault+0x67/0x1a0 [ 5.384840] ? asm_exc_page_fault+0x26/0x30 [ 5.385154] ? process_one_work+0x16a/0x4b0 [ 5.385467] ? bpf_timer_work_cb+0xfc/0x240 [ 5.385789] ? process_one_work+0x1d4/0x4b0 [ 5.386101] ? worker_thread+0x1d5/0x3c0 [ 5.386393] ? __pfx_worker_thread+0x10/0x10 [ 5.386724] ? kthread+0xf5/0x130 [ 5.386974] ? __pfx_kthread+0x10/0x10 [ 5.387255] ? ret_from_fork+0x31/0x50 [ 5.387537] ? __pfx_kthread+0x10/0x10 [ 5.387820] ? ret_from_fork_asm+0x1b/0x30 [ 5.388127] </TASK> And it looks like the callback is properly called, but the fault comes after: (gdb) list *(process_one_work+0x16a) 0xffffffff810aea8a is in process_one_work (kernel/workqueue.c:2606). 2601 * disabled. 2602 */ 2603 set_work_pool_and_clear_pending(work, pool->id); 2604 2605 pwq->stats[PWQ_STAT_STARTED]++; 2606 raw_spin_unlock_irq(&pool->lock); 2607 2608 lock_map_acquire(&pwq->wq->lockdep_map); 2609 lock_map_acquire(&lockdep_map); 2610 /* And there is no real reason for the spinlock to not be set unless there is a memroy corruption. And if in my program I call bpf_timer_set_callback() before bpf_timer_set_sleepable_cb() like: bpf_timer_set_callback(timer, timer_cb1); bpf_timer_set_sleepable_cb(timer, timer_cb1); I do not see the corruption in the memory. So it seems that when BPF calls the helper, the callback_fn is set in a mode that it is not polluting the memory, while when calling the function pointer from a kfunc, something is not properly set and there is a memory corruption. Does that rings any bell? > + /* The verifier checked that return value is zero. */ > +} > + > static DEFINE_PER_CPU(struct bpf_hrtimer *, hrtimer_running); > > static enum hrtimer_restart bpf_timer_cb(struct hrtimer *hrtimer) > { > struct bpf_hrtimer *t = container_of(hrtimer, struct bpf_hrtimer, timer); > + bpf_callback_t callback_fn, sleepable_cb_fn; > struct bpf_map *map = t->map; > void *value = t->value; > - bpf_callback_t callback_fn; > void *key; > u32 idx; > > BTF_TYPE_EMIT(struct bpf_timer); > + sleepable_cb_fn = rcu_dereference_check(t->sleepable_cb_fn, rcu_read_lock_bh_held()); > + if (sleepable_cb_fn) { > + schedule_work(&t->work); > + goto out; > + } > + > callback_fn = rcu_dereference_check(t->callback_fn, rcu_read_lock_bh_held()); > if (!callback_fn) > goto out; > @@ -1154,10 +1197,14 @@ static enum hrtimer_restart bpf_timer_cb(struct hrtimer *hrtimer) > return HRTIMER_NORESTART; > } > > +#define BPF_TIMER_CLOCK_MASK (MAX_CLOCKS - 1) /* 0xf */ > +#define BPF_TIMER_FLAGS_MASK GENMASK_ULL(63, 4) > + > BPF_CALL_3(bpf_timer_init, struct bpf_timer_kern *, timer, struct bpf_map *, map, > u64, flags) > { > - clockid_t clockid = flags & (MAX_CLOCKS - 1); > + clockid_t clockid = flags & BPF_TIMER_CLOCK_MASK; > + u64 bpf_timer_flags = flags & BPF_TIMER_FLAGS_MASK; > struct bpf_hrtimer *t; > int ret = 0; > > @@ -1168,7 +1215,7 @@ BPF_CALL_3(bpf_timer_init, struct bpf_timer_kern *, timer, struct bpf_map *, map > if (in_nmi()) > return -EOPNOTSUPP; > > - if (flags >= MAX_CLOCKS || > + if (bpf_timer_flags & ~(BPF_F_TIMER_SLEEPABLE) || > /* similar to timerfd except _ALARM variants are not supported */ > (clockid != CLOCK_MONOTONIC && > clockid != CLOCK_REALTIME && > @@ -1190,7 +1237,10 @@ BPF_CALL_3(bpf_timer_init, struct bpf_timer_kern *, timer, struct bpf_map *, map > t->map = map; > t->prog = NULL; > rcu_assign_pointer(t->callback_fn, NULL); > + rcu_assign_pointer(t->sleepable_cb_fn, NULL); > + /* FIXME: probably do something about the SLEEPABLE flag */ > hrtimer_init(&t->timer, clockid, HRTIMER_MODE_REL_SOFT); > + INIT_WORK(&t->work, bpf_timer_work_cb); > t->timer.function = bpf_timer_cb; > WRITE_ONCE(timer->timer, t); > /* Guarantee the order between timer->timer and map->usercnt. So > @@ -1221,8 +1271,8 @@ static const struct bpf_func_proto bpf_timer_init_proto = { > .arg3_type = ARG_ANYTHING, > }; > > -BPF_CALL_3(bpf_timer_set_callback, struct bpf_timer_kern *, timer, void *, callback_fn, > - struct bpf_prog_aux *, aux) > +static int __bpf_timer_set_callback(struct bpf_timer_kern *timer, void *callback_fn, > + struct bpf_prog_aux *aux, bool is_sleepable) > { > struct bpf_prog *prev, *prog = aux->prog; > struct bpf_hrtimer *t; > @@ -1260,12 +1310,24 @@ BPF_CALL_3(bpf_timer_set_callback, struct bpf_timer_kern *, timer, void *, callb > bpf_prog_put(prev); > t->prog = prog; > } > - rcu_assign_pointer(t->callback_fn, callback_fn); > + if (is_sleepable) { > + rcu_assign_pointer(t->sleepable_cb_fn, callback_fn); > + rcu_assign_pointer(t->callback_fn, NULL); > + } else { > + rcu_assign_pointer(t->callback_fn, callback_fn); > + rcu_assign_pointer(t->sleepable_cb_fn, NULL); > + } > out: > __bpf_spin_unlock_irqrestore(&timer->lock); > return ret; > } > > +BPF_CALL_3(bpf_timer_set_callback, struct bpf_timer_kern *, timer, void *, callback_fn, > + struct bpf_prog_aux *, aux) > +{ > + return __bpf_timer_set_callback(timer, callback_fn, aux, false); > +} > + > static const struct bpf_func_proto bpf_timer_set_callback_proto = { > .func = bpf_timer_set_callback, > .gpl_only = true, > @@ -1353,6 +1415,7 @@ BPF_CALL_1(bpf_timer_cancel, struct bpf_timer_kern *, timer) > * if it was running. > */ > ret = ret ?: hrtimer_cancel(&t->timer); > + ret = ret ?: cancel_work_sync(&t->work); > return ret; > } > > @@ -1407,6 +1470,8 @@ void bpf_timer_cancel_and_free(void *val) > */ > if (this_cpu_read(hrtimer_running) != t) > hrtimer_cancel(&t->timer); > + > + cancel_work_sync(&t->work); > kfree(t); > } > > @@ -2542,6 +2607,33 @@ __bpf_kfunc void bpf_throw(u64 cookie) > WARN(1, "A call to BPF exception callback should never return\n"); > } > > +/* FIXME: use kernel doc style */ > +/* Description > + * Configure the timer to call *callback_fn* static function in a > + * sleepable context. > + * Return > + * 0 on success. > + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. > + * **-EPERM** if *timer* is in a map that doesn't have any user references. > + * The user space should either hold a file descriptor to a map with timers > + * or pin such map in bpffs. When map is unpinned or file descriptor is > + * closed all timers in the map will be cancelled and freed. > + */ > +__bpf_kfunc int bpf_timer_set_sleepable_cb(struct bpf_timer_kern *timer, > + int (callback_fn)(void *map, int *key, struct bpf_timer *timer)) > +{ > + struct bpf_throw_ctx ctx = {}; > + > + /* FIXME: definietely not sure this is OK */ > + arch_bpf_stack_walk(bpf_stack_walker, &ctx); > + WARN_ON_ONCE(!ctx.aux); > + > + if (!ctx.aux) > + return -EINVAL; > + > + return __bpf_timer_set_callback(timer, (void *)callback_fn, ctx.aux, true); > +} > + > __bpf_kfunc_end_defs(); > > BTF_KFUNCS_START(generic_btf_ids) > @@ -2573,6 +2665,7 @@ BTF_ID_FLAGS(func, bpf_task_get_cgroup1, KF_ACQUIRE | KF_RCU | KF_RET_NULL) > #endif > BTF_ID_FLAGS(func, bpf_task_from_pid, KF_ACQUIRE | KF_RET_NULL) > BTF_ID_FLAGS(func, bpf_throw) > +BTF_ID_FLAGS(func, bpf_timer_set_sleepable_cb) I also just realized that this should go into common_btf_ids so that anybody can use it, not just tracing. Cheers, Benjamin > BTF_KFUNCS_END(generic_btf_ids) > > static const struct btf_kfunc_id_set generic_kfunc_set = { > diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c > index 7831adba9abf..67da3f7bddb5 100644 > --- a/kernel/bpf/verifier.c > +++ b/kernel/bpf/verifier.c > @@ -503,6 +503,8 @@ static bool is_dynptr_ref_function(enum bpf_func_id func_id) > static bool is_sync_callback_calling_kfunc(u32 btf_id); > static bool is_bpf_throw_kfunc(struct bpf_insn *insn); > > +static bool is_bpf_timer_set_sleepable_cb_kfunc(u32 btf_id); > + > static bool is_sync_callback_calling_function(enum bpf_func_id func_id) > { > return func_id == BPF_FUNC_for_each_map_elem || > @@ -513,7 +515,8 @@ static bool is_sync_callback_calling_function(enum bpf_func_id func_id) > > static bool is_async_callback_calling_function(enum bpf_func_id func_id) > { > - return func_id == BPF_FUNC_timer_set_callback; > + return func_id == BPF_FUNC_timer_set_callback || > + is_bpf_timer_set_sleepable_cb_kfunc(func_id); > } > > static bool is_callback_calling_function(enum bpf_func_id func_id) > @@ -1414,6 +1417,7 @@ static int copy_verifier_state(struct bpf_verifier_state *dst_state, > } > dst_state->speculative = src->speculative; > dst_state->active_rcu_lock = src->active_rcu_lock; > + dst_state->in_sleepable = src->in_sleepable; > dst_state->curframe = src->curframe; > dst_state->active_lock.ptr = src->active_lock.ptr; > dst_state->active_lock.id = src->active_lock.id; > @@ -2413,6 +2417,7 @@ static struct bpf_verifier_state *push_async_cb(struct bpf_verifier_env *env, > * Initialize it similar to do_check_common(). > */ > elem->st.branches = 1; > + elem->st.in_sleepable = env->subprog_info[subprog].is_sleepable; > frame = kzalloc(sizeof(*frame), GFP_KERNEL); > if (!frame) > goto err; > @@ -5257,7 +5262,8 @@ static int map_kptr_match_type(struct bpf_verifier_env *env, > > static bool in_sleepable(struct bpf_verifier_env *env) > { > - return env->prog->aux->sleepable; > + return env->prog->aux->sleepable || > + (env->cur_state && env->cur_state->in_sleepable); > } > > /* The non-sleepable programs and sleepable programs with explicit bpf_rcu_read_lock() > @@ -5439,6 +5445,26 @@ static int check_map_access(struct bpf_verifier_env *env, u32 regno, > return -EACCES; > } > break; > + case BPF_TIMER: > + /* FIXME: kptr does the above, should we use the same? */ > + if (src != ACCESS_DIRECT) { > + verbose(env, "bpf_timer cannot be accessed indirectly by helper\n"); > + return -EACCES; > + } > + if (!tnum_is_const(reg->var_off)) { > + verbose(env, "bpf_timer access cannot have variable offset\n"); > + return -EACCES; > + } > + if (p != off + reg->var_off.value) { > + verbose(env, "bpf_timer access misaligned expected=%u off=%llu\n", > + p, off + reg->var_off.value); > + return -EACCES; > + } > + if (size != bpf_size_to_bytes(BPF_DW)) { > + verbose(env, "bpf_timer access size must be BPF_DW\n"); > + return -EACCES; > + } > + break; > default: > verbose(env, "%s cannot be accessed directly by load/store\n", > btf_field_type_name(field->type)); > @@ -9439,11 +9465,13 @@ static int push_callback_call(struct bpf_verifier_env *env, struct bpf_insn *ins > > if (insn->code == (BPF_JMP | BPF_CALL) && > insn->src_reg == 0 && > - insn->imm == BPF_FUNC_timer_set_callback) { > + (insn->imm == BPF_FUNC_timer_set_callback || > + is_bpf_timer_set_sleepable_cb_kfunc(insn->imm))) { > struct bpf_verifier_state *async_cb; > > /* there is no real recursion here. timer callbacks are async */ > env->subprog_info[subprog].is_async_cb = true; > + env->subprog_info[subprog].is_sleepable = is_bpf_timer_set_sleepable_cb_kfunc(insn->imm); > async_cb = push_async_cb(env, env->subprog_info[subprog].start, > insn_idx, subprog); > if (!async_cb) > @@ -10412,6 +10440,10 @@ static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn > break; > } > > + if (is_bpf_timer_set_sleepable_cb_kfunc(func_id)) > + err = push_callback_call(env, insn, insn_idx, meta.subprogno, > + set_timer_callback_state); > + > if (err) > return err; > > @@ -10789,6 +10821,7 @@ enum { > KF_ARG_LIST_NODE_ID, > KF_ARG_RB_ROOT_ID, > KF_ARG_RB_NODE_ID, > + KF_ARG_TIMER_ID, > }; > > BTF_ID_LIST(kf_arg_btf_ids) > @@ -10797,6 +10830,7 @@ BTF_ID(struct, bpf_list_head) > BTF_ID(struct, bpf_list_node) > BTF_ID(struct, bpf_rb_root) > BTF_ID(struct, bpf_rb_node) > +BTF_ID(struct, bpf_timer_kern) > > static bool __is_kfunc_ptr_arg_type(const struct btf *btf, > const struct btf_param *arg, int type) > @@ -10840,6 +10874,12 @@ static bool is_kfunc_arg_rbtree_node(const struct btf *btf, const struct btf_par > return __is_kfunc_ptr_arg_type(btf, arg, KF_ARG_RB_NODE_ID); > } > > +static bool is_kfunc_arg_timer(const struct btf *btf, const struct btf_param *arg) > +{ > + bool ret = __is_kfunc_ptr_arg_type(btf, arg, KF_ARG_TIMER_ID); > + return ret; > +} > + > static bool is_kfunc_arg_callback(struct bpf_verifier_env *env, const struct btf *btf, > const struct btf_param *arg) > { > @@ -10908,6 +10948,7 @@ enum kfunc_ptr_arg_type { > KF_ARG_PTR_TO_RB_NODE, > KF_ARG_PTR_TO_NULL, > KF_ARG_PTR_TO_CONST_STR, > + KF_ARG_PTR_TO_TIMER, > }; > > enum special_kfunc_type { > @@ -10934,6 +10975,7 @@ enum special_kfunc_type { > KF_bpf_percpu_obj_drop_impl, > KF_bpf_throw, > KF_bpf_iter_css_task_new, > + KF_bpf_timer_set_sleepable_cb, > }; > > BTF_SET_START(special_kfunc_set) > @@ -10960,6 +11002,7 @@ BTF_ID(func, bpf_throw) > #ifdef CONFIG_CGROUPS > BTF_ID(func, bpf_iter_css_task_new) > #endif > +BTF_ID(func, bpf_timer_set_sleepable_cb) > BTF_SET_END(special_kfunc_set) > > BTF_ID_LIST(special_kfunc_list) > @@ -10990,6 +11033,7 @@ BTF_ID(func, bpf_iter_css_task_new) > #else > BTF_ID_UNUSED > #endif > +BTF_ID(func, bpf_timer_set_sleepable_cb) > > static bool is_kfunc_ret_null(struct bpf_kfunc_call_arg_meta *meta) > { > @@ -11061,6 +11105,9 @@ get_kfunc_ptr_arg_type(struct bpf_verifier_env *env, > if (is_kfunc_arg_const_str(meta->btf, &args[argno])) > return KF_ARG_PTR_TO_CONST_STR; > > + if (is_kfunc_arg_timer(meta->btf, &args[argno])) > + return KF_ARG_PTR_TO_TIMER; > + > if ((base_type(reg->type) == PTR_TO_BTF_ID || reg2btf_ids[base_type(reg->type)])) { > if (!btf_type_is_struct(ref_t)) { > verbose(env, "kernel function %s args#%d pointer type %s %s is not supported\n", > @@ -11318,6 +11365,11 @@ static bool is_bpf_throw_kfunc(struct bpf_insn *insn) > insn->imm == special_kfunc_list[KF_bpf_throw]; > } > > +static bool is_bpf_timer_set_sleepable_cb_kfunc(u32 btf_id) > +{ > + return btf_id == special_kfunc_list[KF_bpf_timer_set_sleepable_cb]; > +} > + > static bool is_rbtree_lock_required_kfunc(u32 btf_id) > { > return is_bpf_rbtree_api_kfunc(btf_id); > @@ -11693,6 +11745,7 @@ static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_ > case KF_ARG_PTR_TO_CALLBACK: > case KF_ARG_PTR_TO_REFCOUNTED_KPTR: > case KF_ARG_PTR_TO_CONST_STR: > + case KF_ARG_PTR_TO_TIMER: > /* Trusted by default */ > break; > default: > @@ -11973,6 +12026,9 @@ static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_ > if (ret) > return ret; > break; > + case KF_ARG_PTR_TO_TIMER: > + /* FIXME: should we do anything here? */ > + break; > } > } > > @@ -15591,7 +15647,9 @@ static int visit_insn(int t, struct bpf_verifier_env *env) > return DONE_EXPLORING; > > case BPF_CALL: > - if (insn->src_reg == 0 && insn->imm == BPF_FUNC_timer_set_callback) > + if (insn->src_reg == 0 && > + (insn->imm == BPF_FUNC_timer_set_callback || > + is_bpf_timer_set_sleepable_cb_kfunc(insn->imm))) > /* Mark this call insn as a prune point to trigger > * is_state_visited() check before call itself is > * processed by __check_func_call(). Otherwise new > @@ -16767,6 +16825,9 @@ static bool states_equal(struct bpf_verifier_env *env, > if (old->active_rcu_lock != cur->active_rcu_lock) > return false; > > + if (old->in_sleepable != cur->in_sleepable) > + return false; > + > /* for states to be equal callsites have to be the same > * and all frame states need to be equivalent > */ > @@ -19644,7 +19705,8 @@ static int do_misc_fixups(struct bpf_verifier_env *env) > continue; > } > > - if (insn->imm == BPF_FUNC_timer_set_callback) { > + if (insn->imm == BPF_FUNC_timer_set_callback || > + is_bpf_timer_set_sleepable_cb_kfunc(insn->imm)) { > /* The verifier will process callback_fn as many times as necessary > * with different maps and the register states prepared by > * set_timer_callback_state will be accurate. > > -- > 2.43.0 >
On 2/14/24 9:18 AM, Benjamin Tissoires wrote: > +static void bpf_timer_work_cb(struct work_struct *work) > +{ > + struct bpf_hrtimer *t = container_of(work, struct bpf_hrtimer, work); > + struct bpf_map *map = t->map; > + void *value = t->value; > + bpf_callback_t callback_fn; > + void *key; > + u32 idx; > + > + BTF_TYPE_EMIT(struct bpf_timer); > + > + rcu_read_lock(); > + callback_fn = rcu_dereference(t->sleepable_cb_fn); > + rcu_read_unlock(); I took a very brief look at patch 2. One thing that may worth to ask here, the rcu_read_unlock() seems to be done too early. It is protecting the t->sleepable_cb_fn (?), so should it be done after finished using the callback_fn? A high level design question. The intention of the new bpf_timer_set_sleepable_cb() kfunc is actually to delay work to a workqueue. It is useful to delay work from the bpf_timer_cb and it may also useful to delay work from other bpf running context (e.g. the networking hooks like "tc"). The bpf_timer_set_sleepable_cb() seems to be unnecessary forcing delay-work must be done in a bpf_timer_cb. Have you thought about if it is possible to create a more generic kfunc like bpf_schedule_work() to delay work to a workqueue ? > + if (!callback_fn) > + return; > + > + /* FIXME: do we need any locking? */ > + if (map->map_type == BPF_MAP_TYPE_ARRAY) { > + struct bpf_array *array = container_of(map, struct bpf_array, map); > + > + /* compute the key */ > + idx = ((char *)value - array->value) / array->elem_size; > + key = &idx; > + } else { /* hash or lru */ > + key = value - round_up(map->key_size, 8); > + } > + > + /* FIXME: this crashes the system with > + * BUG: kernel NULL pointer dereference, address: 000000000000000b > + */ > + /* callback_fn((u64)(long)map, (u64)(long)key, (u64)(long)value, 0, 0); */ > + /* The verifier checked that return value is zero. */ > +} > + [ ... ] > +/* FIXME: use kernel doc style */ > +/* Description > + * Configure the timer to call *callback_fn* static function in a > + * sleepable context. > + * Return > + * 0 on success. > + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. > + * **-EPERM** if *timer* is in a map that doesn't have any user references. > + * The user space should either hold a file descriptor to a map with timers > + * or pin such map in bpffs. When map is unpinned or file descriptor is > + * closed all timers in the map will be cancelled and freed. > + */ > +__bpf_kfunc int bpf_timer_set_sleepable_cb(struct bpf_timer_kern *timer, > + int (callback_fn)(void *map, int *key, struct bpf_timer *timer)) > +{ > + struct bpf_throw_ctx ctx = {}; > + > + /* FIXME: definietely not sure this is OK */ > + arch_bpf_stack_walk(bpf_stack_walker, &ctx); > + WARN_ON_ONCE(!ctx.aux); > + > + if (!ctx.aux) > + return -EINVAL; > + > + return __bpf_timer_set_callback(timer, (void *)callback_fn, ctx.aux, true); > +} > +
On Feb 15 2024, Martin KaFai Lau wrote: > On 2/14/24 9:18 AM, Benjamin Tissoires wrote: > > +static void bpf_timer_work_cb(struct work_struct *work) > > +{ > > + struct bpf_hrtimer *t = container_of(work, struct bpf_hrtimer, work); > > + struct bpf_map *map = t->map; > > + void *value = t->value; > > + bpf_callback_t callback_fn; > > + void *key; > > + u32 idx; > > + > > + BTF_TYPE_EMIT(struct bpf_timer); > > + > > + rcu_read_lock(); > > + callback_fn = rcu_dereference(t->sleepable_cb_fn); > > + rcu_read_unlock(); > > I took a very brief look at patch 2. One thing that may worth to ask here, > the rcu_read_unlock() seems to be done too early. It is protecting the > t->sleepable_cb_fn (?), so should it be done after finished using the > callback_fn? Probably :) TBH, everytime I work with RCUs I spent countless hours trying to re-understand everything, and in this case I'm currently in the "let's make it work" process than fixing concurrency issues. I still gave it a shot in case it solves my issue, but no, I still have the crash. But given that callback_fn might sleep, isn't it an issue to keep the RCU_reader lock so long? (we don't seem to call synchronize_rcu() so it might be fine, but I'd like the confirmation from someone else). > > A high level design question. The intention of the new > bpf_timer_set_sleepable_cb() kfunc is actually to delay work to a workqueue. > It is useful to delay work from the bpf_timer_cb and it may also useful to > delay work from other bpf running context (e.g. the networking hooks like > "tc"). The bpf_timer_set_sleepable_cb() seems to be unnecessary forcing > delay-work must be done in a bpf_timer_cb. Basically I'm just a monkey here. I've been told that I should use bpf_timer[0]. But my implementation is not finished, as Alexei mentioned that we should bypass hrtimer if I'm not wrong [1]. > > Have you thought about if it is possible to create a more generic kfunc like > bpf_schedule_work() to delay work to a workqueue ? > AFAIU if we were to have a separate bpf_schedule_work(), we still need all of the infra of bpf_timer, because we need to keep the programs around in the same way bpf_timer does. So basically, bpf_timer will not only be about hrtimers, but anything that need to run an async callback. I submitted this RFC v2 not for the "this is ready", but mostly because there is a crash and I can't see where it comes from, and I suspect this is from a piece I do not understand (translation from the BPF langage into actual elf assembly). Cheers, Benjamin [0] https://lore.kernel.org/bpf/ztou4yyrsdfmmhdwgu2f2noartpqklhvtbw7vj2ptk54eqohvb@qci7bcnbd56q/T/#mc9cab17138b13c83299f0836ca0b2dde0643ea4b [1] https://lore.kernel.org/bpf/ztou4yyrsdfmmhdwgu2f2noartpqklhvtbw7vj2ptk54eqohvb@qci7bcnbd56q/T/#mf59824ad625992b980afbc4f27c83e76245815e7 > > > > + if (!callback_fn) > > + return; > > + > > + /* FIXME: do we need any locking? */ > > + if (map->map_type == BPF_MAP_TYPE_ARRAY) { > > + struct bpf_array *array = container_of(map, struct bpf_array, map); > > + > > + /* compute the key */ > > + idx = ((char *)value - array->value) / array->elem_size; > > + key = &idx; > > + } else { /* hash or lru */ > > + key = value - round_up(map->key_size, 8); > > + } > > + > > + /* FIXME: this crashes the system with > > + * BUG: kernel NULL pointer dereference, address: 000000000000000b > > + */ > > + /* callback_fn((u64)(long)map, (u64)(long)key, (u64)(long)value, 0, 0); */ > > + /* The verifier checked that return value is zero. */ > > +} > > + > > [ ... ] > > > +/* FIXME: use kernel doc style */ > > +/* Description > > + * Configure the timer to call *callback_fn* static function in a > > + * sleepable context. > > + * Return > > + * 0 on success. > > + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. > > + * **-EPERM** if *timer* is in a map that doesn't have any user references. > > + * The user space should either hold a file descriptor to a map with timers > > + * or pin such map in bpffs. When map is unpinned or file descriptor is > > + * closed all timers in the map will be cancelled and freed. > > + */ > > +__bpf_kfunc int bpf_timer_set_sleepable_cb(struct bpf_timer_kern *timer, > > + int (callback_fn)(void *map, int *key, struct bpf_timer *timer)) > > +{ > > + struct bpf_throw_ctx ctx = {}; > > + > > + /* FIXME: definietely not sure this is OK */ > > + arch_bpf_stack_walk(bpf_stack_walker, &ctx); > > + WARN_ON_ONCE(!ctx.aux); > > + > > + if (!ctx.aux) > > + return -EINVAL; > > + > > + return __bpf_timer_set_callback(timer, (void *)callback_fn, ctx.aux, true); > > +} > > + >
On Feb 15 2024, Benjamin Tissoires wrote: > On Feb 14 2024, Benjamin Tissoires wrote: > > They are implemented as a kfunc, which means a little bit of tweaks in > > the verifier. > > > > Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> > > > > --- > > > > changes in v2 (compared to the one attaches to v1 0/9): > > - make use of a kfunc > > - add a (non-used) BPF_F_TIMER_SLEEPABLE > > - the callback is *not* called, it makes the kernel crashes > > --- > > include/linux/bpf_verifier.h | 2 + > > include/uapi/linux/bpf.h | 12 +++++ > > kernel/bpf/helpers.c | 105 ++++++++++++++++++++++++++++++++++++++++--- > > kernel/bpf/verifier.c | 72 ++++++++++++++++++++++++++--- > > 4 files changed, 180 insertions(+), 11 deletions(-) > > > > diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h > > index 84365e6dd85d..789ef5fec547 100644 > > --- a/include/linux/bpf_verifier.h > > +++ b/include/linux/bpf_verifier.h > > @@ -426,6 +426,7 @@ struct bpf_verifier_state { > > * while they are still in use. > > */ > > bool used_as_loop_entry; > > + bool in_sleepable; > > > > /* first and last insn idx of this verifier state */ > > u32 first_insn_idx; > > @@ -626,6 +627,7 @@ struct bpf_subprog_info { > > bool is_async_cb: 1; > > bool is_exception_cb: 1; > > bool args_cached: 1; > > + bool is_sleepable: 1; > > > > u8 arg_cnt; > > struct bpf_subprog_arg_info args[MAX_BPF_FUNC_REG_ARGS]; > > diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h > > index d96708380e52..0838597028a9 100644 > > --- a/include/uapi/linux/bpf.h > > +++ b/include/uapi/linux/bpf.h > > @@ -7427,6 +7427,18 @@ enum { > > BPF_F_TIMER_CPU_PIN = (1ULL << 1), > > }; > > > > +/* Extra flags to control bpf_timer_init() behaviour, in addition to CLOCK_*. > > + * - BPF_F_TIMER_SLEEPABLE: Timer will run in a workqueue in a sleepable > > + * context. > > + */ > > +enum { > > + /* CLOCK_* are using bits 0 to 3 */ > > + BPF_F_TIMER_SLEEPABLE = (1ULL << 4), > > + __MAX_BPF_F_TIMER_INIT, > > +}; > > + > > +#define MAX_BPF_F_TIMER_INIT __MAX_BPF_F_TIMER_INIT > > + > > /* BPF numbers iterator state */ > > struct bpf_iter_num { > > /* opaque iterator state; having __u64 here allows to preserve correct > > diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c > > index 4db1c658254c..2dbc09ce841a 100644 > > --- a/kernel/bpf/helpers.c > > +++ b/kernel/bpf/helpers.c > > @@ -1097,9 +1097,11 @@ const struct bpf_func_proto bpf_snprintf_proto = { > > */ > > struct bpf_hrtimer { > > struct hrtimer timer; > > + struct work_struct work; > > struct bpf_map *map; > > struct bpf_prog *prog; > > void __rcu *callback_fn; > > + void __rcu *sleepable_cb_fn; > > void *value; > > }; > > > > @@ -1113,18 +1115,59 @@ struct bpf_timer_kern { > > struct bpf_spin_lock lock; > > } __attribute__((aligned(8))); > > > > +static void bpf_timer_work_cb(struct work_struct *work) > > +{ > > + struct bpf_hrtimer *t = container_of(work, struct bpf_hrtimer, work); > > + struct bpf_map *map = t->map; > > + void *value = t->value; > > + bpf_callback_t callback_fn; > > + void *key; > > + u32 idx; > > + > > + BTF_TYPE_EMIT(struct bpf_timer); > > + > > + rcu_read_lock(); > > + callback_fn = rcu_dereference(t->sleepable_cb_fn); > > + rcu_read_unlock(); > > + if (!callback_fn) > > + return; > > + > > + /* FIXME: do we need any locking? */ > > + if (map->map_type == BPF_MAP_TYPE_ARRAY) { > > + struct bpf_array *array = container_of(map, struct bpf_array, map); > > + > > + /* compute the key */ > > + idx = ((char *)value - array->value) / array->elem_size; > > + key = &idx; > > + } else { /* hash or lru */ > > + key = value - round_up(map->key_size, 8); > > + } > > + > > + /* FIXME: this crashes the system with > > + * BUG: kernel NULL pointer dereference, address: 000000000000000b > > + */ > > + /* callback_fn((u64)(long)map, (u64)(long)key, (u64)(long)value, 0, 0); */ > > I've found an interesting side effect here. > > If I uncomment the line above, I get the following dumpstack: > > [ 5.375257] BUG: kernel NULL pointer dereference, address: 000000000000000b > [ 5.376587] #PF: supervisor instruction fetch in kernel mode > [ 5.376932] #PF: error_code(0x0010) - not-present page > [ 5.377249] PGD 1016e6067 P4D 1016e6067 PUD 1016e5067 PMD 0 > [ 5.377602] Oops: 0010 [#1] PREEMPT SMP NOPTI > [ 5.377876] CPU: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.8.0-rc2-gd2c1e1837606-dirty #285 > [ 5.378378] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 > [ 5.378913] Workqueue: events bpf_timer_work_cb > [ 5.379197] RIP: 0010:0xb > [ 5.379369] Code: Unable to access opcode bytes at 0xffffffffffffffe1. > [ 5.379768] RSP: 0018:ffffa5300005be10 EFLAGS: 00010246 > [ 5.380088] RAX: 0000000000000068 RBX: 000000000000000b RCX: 0000000000000000 > [ 5.380523] RDX: ffffa530012a5ff0 RSI: ffffa530012a5fe8 RDI: ffff915ec2bad000 > [ 5.380947] RBP: ffff915ec2bad000 R08: 0000000000000000 R09: 0000000000000001 > [ 5.381368] R10: 0000000000000000 R11: ffffffff9166f820 R12: ffffa530012a5ff0 > [ 5.381793] R13: ffffa530012a5fe8 R14: ffff915ec0073005 R15: ffffffff900aea8a > [ 5.382213] FS: 0000000000000000(0000) GS:ffff915efbc00000(0000) knlGS:0000000000000000 > [ 5.382691] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 5.383036] CR2: ffffffffffffffe1 CR3: 000000010761e003 CR4: 0000000000770ef0 > [ 5.383460] PKRU: 55555554 > [ 5.383643] Call Trace: > [ 5.383831] <TASK> > [ 5.383994] ? __die+0x23/0x70 > [ 5.384228] ? page_fault_oops+0x181/0x4a0 > [ 5.384541] ? exc_page_fault+0x67/0x1a0 > [ 5.384840] ? asm_exc_page_fault+0x26/0x30 > [ 5.385154] ? process_one_work+0x16a/0x4b0 > [ 5.385467] ? bpf_timer_work_cb+0xfc/0x240 > [ 5.385789] ? process_one_work+0x1d4/0x4b0 > [ 5.386101] ? worker_thread+0x1d5/0x3c0 > [ 5.386393] ? __pfx_worker_thread+0x10/0x10 > [ 5.386724] ? kthread+0xf5/0x130 > [ 5.386974] ? __pfx_kthread+0x10/0x10 > [ 5.387255] ? ret_from_fork+0x31/0x50 > [ 5.387537] ? __pfx_kthread+0x10/0x10 > [ 5.387820] ? ret_from_fork_asm+0x1b/0x30 > [ 5.388127] </TASK> > > And it looks like the callback is properly called, but the fault comes > after: > > (gdb) list *(process_one_work+0x16a) > 0xffffffff810aea8a is in process_one_work (kernel/workqueue.c:2606). > 2601 * disabled. > 2602 */ > 2603 set_work_pool_and_clear_pending(work, pool->id); > 2604 > 2605 pwq->stats[PWQ_STAT_STARTED]++; > 2606 raw_spin_unlock_irq(&pool->lock); > 2607 > 2608 lock_map_acquire(&pwq->wq->lockdep_map); > 2609 lock_map_acquire(&lockdep_map); > 2610 /* > > And there is no real reason for the spinlock to not be set unless there > is a memroy corruption. > > And if in my program I call bpf_timer_set_callback() before bpf_timer_set_sleepable_cb() > like: > bpf_timer_set_callback(timer, timer_cb1); > bpf_timer_set_sleepable_cb(timer, timer_cb1); > > I do not see the corruption in the memory. > > So it seems that when BPF calls the helper, the callback_fn is set in a > mode that it is not polluting the memory, while when calling the function > pointer from a kfunc, something is not properly set and there is a > memory corruption. > > Does that rings any bell? Sigh... I found the issue, it was in my code: basically push_callback_call() was never called because I called it from the helper validation call, not the kfunc one :( --- diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index cb1266566b69..58082df468e5 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -501,6 +501,7 @@ static bool is_dynptr_ref_function(enum bpf_func_id func_id) } static bool is_sync_callback_calling_kfunc(u32 btf_id); +static bool is_callback_calling_kfunc(u32 btf_id); static bool is_bpf_throw_kfunc(struct bpf_insn *insn); static bool is_bpf_timer_set_sleepable_cb_kfunc(u32 btf_id); @@ -9452,7 +9453,7 @@ static int push_callback_call(struct bpf_verifier_env *env, struct bpf_insn *ins */ env->subprog_info[subprog].is_cb = true; if (bpf_pseudo_kfunc_call(insn) && - !is_sync_callback_calling_kfunc(insn->imm)) { + !is_callback_calling_kfunc(insn->imm)) { verbose(env, "verifier bug: kfunc %s#%d not marked as callback-calling\n", func_id_name(insn->imm), insn->imm); return -EFAULT; @@ -10440,10 +10441,6 @@ static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn break; } - if (is_bpf_timer_set_sleepable_cb_kfunc(func_id)) - err = push_callback_call(env, insn, insn_idx, meta.subprogno, - set_timer_callback_state); - if (err) return err; @@ -11370,6 +11367,12 @@ static bool is_bpf_timer_set_sleepable_cb_kfunc(u32 btf_id) return btf_id == special_kfunc_list[KF_bpf_timer_set_sleepable_cb]; } +static bool is_callback_calling_kfunc(u32 btf_id) +{ + return is_sync_callback_calling_kfunc(btf_id) || + is_bpf_timer_set_sleepable_cb_kfunc(btf_id); +} + static bool is_rbtree_lock_required_kfunc(u32 btf_id) { return is_bpf_rbtree_api_kfunc(btf_id); @@ -12140,6 +12143,16 @@ static int check_kfunc_call(struct bpf_verifier_env *env, struct bpf_insn *insn, } } + if (is_bpf_timer_set_sleepable_cb_kfunc(meta.func_id)) { + err = push_callback_call(env, insn, insn_idx, meta.subprogno, + set_timer_callback_state); + if (err) { + verbose(env, "kfunc %s#%d failed callback verification\n", + func_name, meta.func_id); + return err; + } + } + rcu_lock = is_kfunc_bpf_rcu_read_lock(&meta); rcu_unlock = is_kfunc_bpf_rcu_read_unlock(&meta); --- [...] Cheers, Benjamin
Benjamin Tissoires <bentiss@kernel.org> writes: > On Feb 15 2024, Martin KaFai Lau wrote: >> On 2/14/24 9:18 AM, Benjamin Tissoires wrote: >> > +static void bpf_timer_work_cb(struct work_struct *work) >> > +{ >> > + struct bpf_hrtimer *t = container_of(work, struct bpf_hrtimer, work); >> > + struct bpf_map *map = t->map; >> > + void *value = t->value; >> > + bpf_callback_t callback_fn; >> > + void *key; >> > + u32 idx; >> > + >> > + BTF_TYPE_EMIT(struct bpf_timer); >> > + >> > + rcu_read_lock(); >> > + callback_fn = rcu_dereference(t->sleepable_cb_fn); >> > + rcu_read_unlock(); >> >> I took a very brief look at patch 2. One thing that may worth to ask here, >> the rcu_read_unlock() seems to be done too early. It is protecting the >> t->sleepable_cb_fn (?), so should it be done after finished using the >> callback_fn? > > Probably :) > > TBH, everytime I work with RCUs I spent countless hours trying to > re-understand everything, and in this case I'm currently in the "let's > make it work" process than fixing concurrency issues. > I still gave it a shot in case it solves my issue, but no, I still have > the crash. > > But given that callback_fn might sleep, isn't it an issue to keep the > RCU_reader lock so long? (we don't seem to call synchronize_rcu() so it > might be fine, but I'd like the confirmation from someone else). You're right, it isn't. From the RCU/checklist.rst doc: 13. Unlike most flavors of RCU, it *is* permissible to block in an SRCU read-side critical section (demarked by srcu_read_lock() and srcu_read_unlock()), hence the "SRCU": "sleepable RCU". Please note that if you don't need to sleep in read-side critical sections, you should be using RCU rather than SRCU, because RCU is almost always faster and easier to use than is SRCU. So we can't use the regular RCU protection for the callback in this usage. We'll need to either convert it to SRCU, or add another protection mechanism to make sure the callback function is not freed from under us (like a refcnt). I suspect the latter may be simpler (from reading the rest of that documentation around SRCU. >> A high level design question. The intention of the new >> bpf_timer_set_sleepable_cb() kfunc is actually to delay work to a workqueue. >> It is useful to delay work from the bpf_timer_cb and it may also useful to >> delay work from other bpf running context (e.g. the networking hooks like >> "tc"). The bpf_timer_set_sleepable_cb() seems to be unnecessary forcing >> delay-work must be done in a bpf_timer_cb. > > Basically I'm just a monkey here. I've been told that I should use > bpf_timer[0]. But my implementation is not finished, as Alexei mentioned > that we should bypass hrtimer if I'm not wrong [1]. I don't think getting rid of the hrtimer in favour of schedule_delayed_work() makes any sense. schedule_delayed_work() does exactly the same as you're doing in this version of the patch: it schedules a timer callback, and calls queue_work() from inside that timer callback. It just uses "regular" timers instead of hrtimers. So I don't think there's any performance benefit from using that facility; on the contrary, it would require extra logic to handle cancellation etc; might as well just re-use the existing hrtimer-based callback logic we already have, and do a schedule_work() from the hrtimer callback like you're doing now. -Toke
Just one comment on one of your FIXMEs: > + rcu_assign_pointer(t->sleepable_cb_fn, NULL); > + /* FIXME: probably do something about the SLEEPABLE flag */ I guess we should store the flag in the timer struct somewhere, and then restrict the set_callback() functions so that the regular variant only works without the flag set, and the _sleepable version only works if the flag is set? Otherwise we may end up calling a non-sleepable function in sleepable context or vise versa... -Toke
On Feb 16 2024, Toke Høiland-Jørgensen wrote: > Benjamin Tissoires <bentiss@kernel.org> writes: > > > On Feb 15 2024, Martin KaFai Lau wrote: > >> On 2/14/24 9:18 AM, Benjamin Tissoires wrote: > >> > +static void bpf_timer_work_cb(struct work_struct *work) > >> > +{ > >> > + struct bpf_hrtimer *t = container_of(work, struct bpf_hrtimer, work); > >> > + struct bpf_map *map = t->map; > >> > + void *value = t->value; > >> > + bpf_callback_t callback_fn; > >> > + void *key; > >> > + u32 idx; > >> > + > >> > + BTF_TYPE_EMIT(struct bpf_timer); > >> > + > >> > + rcu_read_lock(); > >> > + callback_fn = rcu_dereference(t->sleepable_cb_fn); > >> > + rcu_read_unlock(); > >> > >> I took a very brief look at patch 2. One thing that may worth to ask here, > >> the rcu_read_unlock() seems to be done too early. It is protecting the > >> t->sleepable_cb_fn (?), so should it be done after finished using the > >> callback_fn? > > > > Probably :) > > > > TBH, everytime I work with RCUs I spent countless hours trying to > > re-understand everything, and in this case I'm currently in the "let's > > make it work" process than fixing concurrency issues. > > I still gave it a shot in case it solves my issue, but no, I still have > > the crash. > > > > But given that callback_fn might sleep, isn't it an issue to keep the > > RCU_reader lock so long? (we don't seem to call synchronize_rcu() so it > > might be fine, but I'd like the confirmation from someone else). > > You're right, it isn't. From the RCU/checklist.rst doc: > > 13. Unlike most flavors of RCU, it *is* permissible to block in an > SRCU read-side critical section (demarked by srcu_read_lock() > and srcu_read_unlock()), hence the "SRCU": "sleepable RCU". > Please note that if you don't need to sleep in read-side critical > sections, you should be using RCU rather than SRCU, because RCU > is almost always faster and easier to use than is SRCU. > > So we can't use the regular RCU protection for the callback in this > usage. We'll need to either convert it to SRCU, or add another > protection mechanism to make sure the callback function is not freed > from under us (like a refcnt). I suspect the latter may be simpler (from > reading the rest of that documentation around SRCU. Currently I'm thinking at also incrementing the ->prog held in the bpf_hrtimer which should prevent the callback to be freed, if I'm not wrong. Then I should be able to just release the rcu_read_unlock before calling the actual callback. And then put the ref on ->prog once done. But to be able to do that I might need to protect ->prog with an RCU too. > > >> A high level design question. The intention of the new > >> bpf_timer_set_sleepable_cb() kfunc is actually to delay work to a workqueue. > >> It is useful to delay work from the bpf_timer_cb and it may also useful to > >> delay work from other bpf running context (e.g. the networking hooks like > >> "tc"). The bpf_timer_set_sleepable_cb() seems to be unnecessary forcing > >> delay-work must be done in a bpf_timer_cb. > > > > Basically I'm just a monkey here. I've been told that I should use > > bpf_timer[0]. But my implementation is not finished, as Alexei mentioned > > that we should bypass hrtimer if I'm not wrong [1]. > > I don't think getting rid of the hrtimer in favour of > schedule_delayed_work() makes any sense. schedule_delayed_work() does > exactly the same as you're doing in this version of the patch: it > schedules a timer callback, and calls queue_work() from inside that > timer callback. It just uses "regular" timers instead of hrtimers. So I > don't think there's any performance benefit from using that facility; on > the contrary, it would require extra logic to handle cancellation etc; > might as well just re-use the existing hrtimer-based callback logic we > already have, and do a schedule_work() from the hrtimer callback like > you're doing now. I agree that we can nicely emulate delayed_timer with the current patch series. However, if I understand Alexei's idea (and Martin's) there are cases where we just want schedule_work(), without any timer involved. That makes a weird timer (with a delay always equal to 0), but it would allow to satisfy those latency issues. So (and this also answers your second email today) I'm thinking at: - have multiple flags to control the timer (with dedicated timer_cb kernel functions): - BPF_F_TIMER_HRTIMER (default) - BPF_F_TIMER_WORKER (no timer, just workqueue) - BPF_F_TIMER_DELAYED_WORKER (hrtimer + workqueue, or actual delayed_work, but that's re-implementing stuffs) - have bpf_timer_set_callback() and bpf_timer_set_sleepable_cb() strictly equivalent in terms of processing, but the latter just instructs the verifier that the callback can be sleepable (so calling bpf_timer_set_callback() on a BPF_F_TIMER_DELAYED_WORKER is fine as long as the target callback is using non sleepable kfuncs). - ensure that bpf_timer_set_sleepable_cb() is invalid when called with a non sleepable timer flag. - ensure that when the bpf_timer has no hrtimer we also return -EINVAL when a delay is given in bpf_timer_start(). Actually, BPF_F_TIMER_DELAYED_WORKER could be just a combination of (BPF_F_TIMER_HRTIMER | BPF_F_TIMER_WORKER) which would reflect the reality of how things are implemented. Thinking through this a little bit more, maybe we should have BPF_F_TIMER_SLEEPABLE instead of BPF_F_TIMER_WORKER. We can still have BPF_F_TIMER_SLEEPABLE_BH when WQ_BH gets merged. _SLEEPABLE allows to not bind the flag to the implementation... Cheers, Benjamin
On 2/14/24 09:18, Benjamin Tissoires wrote: > +static void bpf_timer_work_cb(struct work_struct *work) > +{ > + struct bpf_hrtimer *t = container_of(work, struct bpf_hrtimer, work); > + struct bpf_map *map = t->map; > + void *value = t->value; > + bpf_callback_t callback_fn; > + void *key; > + u32 idx; > + > + BTF_TYPE_EMIT(struct bpf_timer); > + > + rcu_read_lock(); > + callback_fn = rcu_dereference(t->sleepable_cb_fn); > + rcu_read_unlock(); > + if (!callback_fn) > + return; > + > + /* FIXME: do we need any locking? */ > + if (map->map_type == BPF_MAP_TYPE_ARRAY) { > + struct bpf_array *array = container_of(map, struct bpf_array, map); > + > + /* compute the key */ > + idx = ((char *)value - array->value) / array->elem_size; > + key = &idx; > + } else { /* hash or lru */ > + key = value - round_up(map->key_size, 8); > + } > + > + /* FIXME: this crashes the system with > + * BUG: kernel NULL pointer dereference, address: 000000000000000b > + */ > + /* callback_fn((u64)(long)map, (u64)(long)key, (u64)(long)value, 0, 0); */ > + /* The verifier checked that return value is zero. */ > +} > + > static DEFINE_PER_CPU(struct bpf_hrtimer *, hrtimer_running); > > static enum hrtimer_restart bpf_timer_cb(struct hrtimer *hrtimer) > { > struct bpf_hrtimer *t = container_of(hrtimer, struct bpf_hrtimer, timer); > + bpf_callback_t callback_fn, sleepable_cb_fn; > struct bpf_map *map = t->map; > void *value = t->value; > - bpf_callback_t callback_fn; > void *key; > u32 idx; > > BTF_TYPE_EMIT(struct bpf_timer); > + sleepable_cb_fn = rcu_dereference_check(t->sleepable_cb_fn, > rcu_read_lock_bh_held()); > + if (sleepable_cb_fn) { > + schedule_work(&t->work); It seems nothing to stop the timer from being free here, right? You should have a way to make sure the timer & programs here is still alive when the work is running. For example, it can be flags to indicate the work is scheduled to prevent the timer from releasing, and indicate the timer should be free when returning from the callback. > + goto out; > + } > + > callback_fn = rcu_dereference_check(t->callback_fn, rcu_read_lock_bh_held()); > if (!callback_fn)
Benjamin Tissoires <bentiss@kernel.org> writes: > On Feb 16 2024, Toke Høiland-Jørgensen wrote: >> Benjamin Tissoires <bentiss@kernel.org> writes: >> >> > On Feb 15 2024, Martin KaFai Lau wrote: >> >> On 2/14/24 9:18 AM, Benjamin Tissoires wrote: >> >> > +static void bpf_timer_work_cb(struct work_struct *work) >> >> > +{ >> >> > + struct bpf_hrtimer *t = container_of(work, struct bpf_hrtimer, work); >> >> > + struct bpf_map *map = t->map; >> >> > + void *value = t->value; >> >> > + bpf_callback_t callback_fn; >> >> > + void *key; >> >> > + u32 idx; >> >> > + >> >> > + BTF_TYPE_EMIT(struct bpf_timer); >> >> > + >> >> > + rcu_read_lock(); >> >> > + callback_fn = rcu_dereference(t->sleepable_cb_fn); >> >> > + rcu_read_unlock(); >> >> >> >> I took a very brief look at patch 2. One thing that may worth to ask here, >> >> the rcu_read_unlock() seems to be done too early. It is protecting the >> >> t->sleepable_cb_fn (?), so should it be done after finished using the >> >> callback_fn? >> > >> > Probably :) >> > >> > TBH, everytime I work with RCUs I spent countless hours trying to >> > re-understand everything, and in this case I'm currently in the "let's >> > make it work" process than fixing concurrency issues. >> > I still gave it a shot in case it solves my issue, but no, I still have >> > the crash. >> > >> > But given that callback_fn might sleep, isn't it an issue to keep the >> > RCU_reader lock so long? (we don't seem to call synchronize_rcu() so it >> > might be fine, but I'd like the confirmation from someone else). >> >> You're right, it isn't. From the RCU/checklist.rst doc: >> >> 13. Unlike most flavors of RCU, it *is* permissible to block in an >> SRCU read-side critical section (demarked by srcu_read_lock() >> and srcu_read_unlock()), hence the "SRCU": "sleepable RCU". >> Please note that if you don't need to sleep in read-side critical >> sections, you should be using RCU rather than SRCU, because RCU >> is almost always faster and easier to use than is SRCU. >> >> So we can't use the regular RCU protection for the callback in this >> usage. We'll need to either convert it to SRCU, or add another >> protection mechanism to make sure the callback function is not freed >> from under us (like a refcnt). I suspect the latter may be simpler (from >> reading the rest of that documentation around SRCU. > > Currently I'm thinking at also incrementing the ->prog held in the > bpf_hrtimer which should prevent the callback to be freed, if I'm not wrong. > Then I should be able to just release the rcu_read_unlock before calling > the actual callback. And then put the ref on ->prog once done. > > But to be able to do that I might need to protect ->prog with an RCU > too. Hmm, bpf_timer_set_callback() already increments the bpf refcnt; so it's a matter of ensuring that bpf_timer_cancel() and bpf_timer_cancel_and_free() wait for the callback to complete even in the workqueue case. The current 'hrtimer_running' percpu global var is not going to cut it for that, so I guess some other kind of locking will be needed? Not really sure what would be appropriate here, a refcnt, or maybe a full mutex? I am not actually sure the RCU protection of the callback field itself is that important given all the other protections that make sure the callback has exited before cancelling? As long as we add another such protection I think it can just be a READ_ONCE() for getting the cb pointer? >> >> A high level design question. The intention of the new >> >> bpf_timer_set_sleepable_cb() kfunc is actually to delay work to a workqueue. >> >> It is useful to delay work from the bpf_timer_cb and it may also useful to >> >> delay work from other bpf running context (e.g. the networking hooks like >> >> "tc"). The bpf_timer_set_sleepable_cb() seems to be unnecessary forcing >> >> delay-work must be done in a bpf_timer_cb. >> > >> > Basically I'm just a monkey here. I've been told that I should use >> > bpf_timer[0]. But my implementation is not finished, as Alexei mentioned >> > that we should bypass hrtimer if I'm not wrong [1]. >> >> I don't think getting rid of the hrtimer in favour of >> schedule_delayed_work() makes any sense. schedule_delayed_work() does >> exactly the same as you're doing in this version of the patch: it >> schedules a timer callback, and calls queue_work() from inside that >> timer callback. It just uses "regular" timers instead of hrtimers. So I >> don't think there's any performance benefit from using that facility; on >> the contrary, it would require extra logic to handle cancellation etc; >> might as well just re-use the existing hrtimer-based callback logic we >> already have, and do a schedule_work() from the hrtimer callback like >> you're doing now. > > I agree that we can nicely emulate delayed_timer with the current patch > series. However, if I understand Alexei's idea (and Martin's) there are > cases where we just want schedule_work(), without any timer involved. > That makes a weird timer (with a delay always equal to 0), but it would > allow to satisfy those latency issues. > > So (and this also answers your second email today) I'm thinking at: > - have multiple flags to control the timer (with dedicated timer_cb > kernel functions): > - BPF_F_TIMER_HRTIMER (default) > - BPF_F_TIMER_WORKER (no timer, just workqueue) > - BPF_F_TIMER_DELAYED_WORKER (hrtimer + workqueue, or actual > delayed_work, but that's re-implementing stuffs) I don't think the "delayed" bit needs to be a property of the timer; the context in which the timer is executed (softirq vs workqueue) is, because that has consequences for how the callback is verified (it would be neat if we could know the flag at verification time, but since we can't we need the pairing with the _set_sleepable_cb()). But the same timer could be used both as an immediate and a delayed callback during its lifetime; so I think this should rather be governed by a flag to bpf_timer_start(). In fact, the patch I linked earlier[0] does just that, adding a BPF_TIMER_IMMEDIATE flag to bpf_timer_start(). I.e., keep the hrtimer allocated at all times, but skip going through it if that flag is set. An alternative could also be to just special-case a zero timeout in bpf_timer_start(); I don't actually recall why I went with the flag instead when I wrote that patch... -Toke [0] https://git.kernel.org/pub/scm/linux/kernel/git/toke/linux.git/commit/?h=xdp-queueing-08&id=54bc201a358d1ac6ebfe900099315bbd0a76e862
On Fri, Feb 16, 2024 at 03:58:20PM +0100, Benjamin Tissoires wrote: > > So (and this also answers your second email today) I'm thinking at: > - have multiple flags to control the timer (with dedicated timer_cb > kernel functions): > - BPF_F_TIMER_HRTIMER (default) > - BPF_F_TIMER_WORKER (no timer, just workqueue) These two make sense, but > - BPF_F_TIMER_DELAYED_WORKER (hrtimer + workqueue, or actual > delayed_work, but that's re-implementing stuffs) This one doesn't. Unlike hrtimer the workqueue is non deterministic. Requesting a callback after a specific delay only to be randomized by the workqueue is a confusing UX to give to bpf progs. If bpf author really want to do something like that they can implement such anti-feature manually with two bpf_timers. Later we'll add a selector for WQ. At that time we'd need to decide whether to use a dedicated kthread or any of system_*_wq or WQ_BH. For now I'd only expose 'sleepable' as a guarantee in bpf api. Hence BPF_F_TIMER_SLEEPABLE is the only extra bit in flags for bpf_timer_start(). Not sure whether it's needed in bpf_timer_init() too.
On Fri, Feb 16, 2024 at 10:50:10AM +0100, Benjamin Tissoires wrote: > static bool is_rbtree_lock_required_kfunc(u32 btf_id) > { > return is_bpf_rbtree_api_kfunc(btf_id); > @@ -12140,6 +12143,16 @@ static int check_kfunc_call(struct bpf_verifier_env *env, struct bpf_insn *insn, > } > } > > + if (is_bpf_timer_set_sleepable_cb_kfunc(meta.func_id)) { > + err = push_callback_call(env, insn, insn_idx, meta.subprogno, > + set_timer_callback_state); > + if (err) { > + verbose(env, "kfunc %s#%d failed callback verification\n", > + func_name, meta.func_id); > + return err; > + } > + } All makes sense so far. Please squash all the fix and repost. It's hard to do a proper review in this shape of the patch. As far as rcu_read_lock/unlock that is done in callback... it feels buggy and unnecessary. bpf prog and timer won't disappear while work is queued. array and hash map will call bpf_obj_free_timer() before going away. And things like: + rcu_read_lock(); + callback_fn = rcu_dereference(t->sleepable_cb_fn); + rcu_read_unlock(); + if (!callback_fn) + return; is 99% broken. if (!callback_fn) line is UAF.
[replying to both of your messages here] On Wed, Feb 21, 2024 at 3:59 AM Alexei Starovoitov <alexei.starovoitov@gmail.com> wrote: > > On Fri, Feb 16, 2024 at 10:50:10AM +0100, Benjamin Tissoires wrote: > > static bool is_rbtree_lock_required_kfunc(u32 btf_id) > > { > > return is_bpf_rbtree_api_kfunc(btf_id); > > @@ -12140,6 +12143,16 @@ static int check_kfunc_call(struct bpf_verifier_env *env, struct bpf_insn *insn, > > } > > } > > > > + if (is_bpf_timer_set_sleepable_cb_kfunc(meta.func_id)) { > > + err = push_callback_call(env, insn, insn_idx, meta.subprogno, > > + set_timer_callback_state); > > + if (err) { > > + verbose(env, "kfunc %s#%d failed callback verification\n", > > + func_name, meta.func_id); > > + return err; > > + } > > + } > > All makes sense so far. > Please squash all the fix and repost. > It's hard to do a proper review in this shape of the patch. Yeah, I was expecting a very quick "I know why you are crashing", not a full review here. > As far as rcu_read_lock/unlock that is done in callback... > it feels buggy and unnecessary. This rcu approach is indeed wrong, but there still needs to be some locking if bpf_timer_set_callback() or bpf_timer_set_sleepable_cb() is called while the work just started. I went with a semaphore in v3 as it seemed lightweight enough there. Please shout if you disagree :) Anyway, I've also dropped the flags in bpf_timer_init() in v3 to only add BPF_F_TIMER_SLEEPABLE in bpf_timer_start(). V3 (not RFC) is coming. Cheers, Benjamin > bpf prog and timer won't disappear while work is queued. > array and hash map will call bpf_obj_free_timer() before going away. > > And things like: > + rcu_read_lock(); > + callback_fn = rcu_dereference(t->sleepable_cb_fn); > + rcu_read_unlock(); > + if (!callback_fn) > + return; > > is 99% broken. if (!callback_fn) line is UAF. >
diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index 84365e6dd85d..789ef5fec547 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -426,6 +426,7 @@ struct bpf_verifier_state { * while they are still in use. */ bool used_as_loop_entry; + bool in_sleepable; /* first and last insn idx of this verifier state */ u32 first_insn_idx; @@ -626,6 +627,7 @@ struct bpf_subprog_info { bool is_async_cb: 1; bool is_exception_cb: 1; bool args_cached: 1; + bool is_sleepable: 1; u8 arg_cnt; struct bpf_subprog_arg_info args[MAX_BPF_FUNC_REG_ARGS]; diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index d96708380e52..0838597028a9 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -7427,6 +7427,18 @@ enum { BPF_F_TIMER_CPU_PIN = (1ULL << 1), }; +/* Extra flags to control bpf_timer_init() behaviour, in addition to CLOCK_*. + * - BPF_F_TIMER_SLEEPABLE: Timer will run in a workqueue in a sleepable + * context. + */ +enum { + /* CLOCK_* are using bits 0 to 3 */ + BPF_F_TIMER_SLEEPABLE = (1ULL << 4), + __MAX_BPF_F_TIMER_INIT, +}; + +#define MAX_BPF_F_TIMER_INIT __MAX_BPF_F_TIMER_INIT + /* BPF numbers iterator state */ struct bpf_iter_num { /* opaque iterator state; having __u64 here allows to preserve correct diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c index 4db1c658254c..2dbc09ce841a 100644 --- a/kernel/bpf/helpers.c +++ b/kernel/bpf/helpers.c @@ -1097,9 +1097,11 @@ const struct bpf_func_proto bpf_snprintf_proto = { */ struct bpf_hrtimer { struct hrtimer timer; + struct work_struct work; struct bpf_map *map; struct bpf_prog *prog; void __rcu *callback_fn; + void __rcu *sleepable_cb_fn; void *value; }; @@ -1113,18 +1115,59 @@ struct bpf_timer_kern { struct bpf_spin_lock lock; } __attribute__((aligned(8))); +static void bpf_timer_work_cb(struct work_struct *work) +{ + struct bpf_hrtimer *t = container_of(work, struct bpf_hrtimer, work); + struct bpf_map *map = t->map; + void *value = t->value; + bpf_callback_t callback_fn; + void *key; + u32 idx; + + BTF_TYPE_EMIT(struct bpf_timer); + + rcu_read_lock(); + callback_fn = rcu_dereference(t->sleepable_cb_fn); + rcu_read_unlock(); + if (!callback_fn) + return; + + /* FIXME: do we need any locking? */ + if (map->map_type == BPF_MAP_TYPE_ARRAY) { + struct bpf_array *array = container_of(map, struct bpf_array, map); + + /* compute the key */ + idx = ((char *)value - array->value) / array->elem_size; + key = &idx; + } else { /* hash or lru */ + key = value - round_up(map->key_size, 8); + } + + /* FIXME: this crashes the system with + * BUG: kernel NULL pointer dereference, address: 000000000000000b + */ + /* callback_fn((u64)(long)map, (u64)(long)key, (u64)(long)value, 0, 0); */ + /* The verifier checked that return value is zero. */ +} + static DEFINE_PER_CPU(struct bpf_hrtimer *, hrtimer_running); static enum hrtimer_restart bpf_timer_cb(struct hrtimer *hrtimer) { struct bpf_hrtimer *t = container_of(hrtimer, struct bpf_hrtimer, timer); + bpf_callback_t callback_fn, sleepable_cb_fn; struct bpf_map *map = t->map; void *value = t->value; - bpf_callback_t callback_fn; void *key; u32 idx; BTF_TYPE_EMIT(struct bpf_timer); + sleepable_cb_fn = rcu_dereference_check(t->sleepable_cb_fn, rcu_read_lock_bh_held()); + if (sleepable_cb_fn) { + schedule_work(&t->work); + goto out; + } + callback_fn = rcu_dereference_check(t->callback_fn, rcu_read_lock_bh_held()); if (!callback_fn) goto out; @@ -1154,10 +1197,14 @@ static enum hrtimer_restart bpf_timer_cb(struct hrtimer *hrtimer) return HRTIMER_NORESTART; } +#define BPF_TIMER_CLOCK_MASK (MAX_CLOCKS - 1) /* 0xf */ +#define BPF_TIMER_FLAGS_MASK GENMASK_ULL(63, 4) + BPF_CALL_3(bpf_timer_init, struct bpf_timer_kern *, timer, struct bpf_map *, map, u64, flags) { - clockid_t clockid = flags & (MAX_CLOCKS - 1); + clockid_t clockid = flags & BPF_TIMER_CLOCK_MASK; + u64 bpf_timer_flags = flags & BPF_TIMER_FLAGS_MASK; struct bpf_hrtimer *t; int ret = 0; @@ -1168,7 +1215,7 @@ BPF_CALL_3(bpf_timer_init, struct bpf_timer_kern *, timer, struct bpf_map *, map if (in_nmi()) return -EOPNOTSUPP; - if (flags >= MAX_CLOCKS || + if (bpf_timer_flags & ~(BPF_F_TIMER_SLEEPABLE) || /* similar to timerfd except _ALARM variants are not supported */ (clockid != CLOCK_MONOTONIC && clockid != CLOCK_REALTIME && @@ -1190,7 +1237,10 @@ BPF_CALL_3(bpf_timer_init, struct bpf_timer_kern *, timer, struct bpf_map *, map t->map = map; t->prog = NULL; rcu_assign_pointer(t->callback_fn, NULL); + rcu_assign_pointer(t->sleepable_cb_fn, NULL); + /* FIXME: probably do something about the SLEEPABLE flag */ hrtimer_init(&t->timer, clockid, HRTIMER_MODE_REL_SOFT); + INIT_WORK(&t->work, bpf_timer_work_cb); t->timer.function = bpf_timer_cb; WRITE_ONCE(timer->timer, t); /* Guarantee the order between timer->timer and map->usercnt. So @@ -1221,8 +1271,8 @@ static const struct bpf_func_proto bpf_timer_init_proto = { .arg3_type = ARG_ANYTHING, }; -BPF_CALL_3(bpf_timer_set_callback, struct bpf_timer_kern *, timer, void *, callback_fn, - struct bpf_prog_aux *, aux) +static int __bpf_timer_set_callback(struct bpf_timer_kern *timer, void *callback_fn, + struct bpf_prog_aux *aux, bool is_sleepable) { struct bpf_prog *prev, *prog = aux->prog; struct bpf_hrtimer *t; @@ -1260,12 +1310,24 @@ BPF_CALL_3(bpf_timer_set_callback, struct bpf_timer_kern *, timer, void *, callb bpf_prog_put(prev); t->prog = prog; } - rcu_assign_pointer(t->callback_fn, callback_fn); + if (is_sleepable) { + rcu_assign_pointer(t->sleepable_cb_fn, callback_fn); + rcu_assign_pointer(t->callback_fn, NULL); + } else { + rcu_assign_pointer(t->callback_fn, callback_fn); + rcu_assign_pointer(t->sleepable_cb_fn, NULL); + } out: __bpf_spin_unlock_irqrestore(&timer->lock); return ret; } +BPF_CALL_3(bpf_timer_set_callback, struct bpf_timer_kern *, timer, void *, callback_fn, + struct bpf_prog_aux *, aux) +{ + return __bpf_timer_set_callback(timer, callback_fn, aux, false); +} + static const struct bpf_func_proto bpf_timer_set_callback_proto = { .func = bpf_timer_set_callback, .gpl_only = true, @@ -1353,6 +1415,7 @@ BPF_CALL_1(bpf_timer_cancel, struct bpf_timer_kern *, timer) * if it was running. */ ret = ret ?: hrtimer_cancel(&t->timer); + ret = ret ?: cancel_work_sync(&t->work); return ret; } @@ -1407,6 +1470,8 @@ void bpf_timer_cancel_and_free(void *val) */ if (this_cpu_read(hrtimer_running) != t) hrtimer_cancel(&t->timer); + + cancel_work_sync(&t->work); kfree(t); } @@ -2542,6 +2607,33 @@ __bpf_kfunc void bpf_throw(u64 cookie) WARN(1, "A call to BPF exception callback should never return\n"); } +/* FIXME: use kernel doc style */ +/* Description + * Configure the timer to call *callback_fn* static function in a + * sleepable context. + * Return + * 0 on success. + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. + * **-EPERM** if *timer* is in a map that doesn't have any user references. + * The user space should either hold a file descriptor to a map with timers + * or pin such map in bpffs. When map is unpinned or file descriptor is + * closed all timers in the map will be cancelled and freed. + */ +__bpf_kfunc int bpf_timer_set_sleepable_cb(struct bpf_timer_kern *timer, + int (callback_fn)(void *map, int *key, struct bpf_timer *timer)) +{ + struct bpf_throw_ctx ctx = {}; + + /* FIXME: definietely not sure this is OK */ + arch_bpf_stack_walk(bpf_stack_walker, &ctx); + WARN_ON_ONCE(!ctx.aux); + + if (!ctx.aux) + return -EINVAL; + + return __bpf_timer_set_callback(timer, (void *)callback_fn, ctx.aux, true); +} + __bpf_kfunc_end_defs(); BTF_KFUNCS_START(generic_btf_ids) @@ -2573,6 +2665,7 @@ BTF_ID_FLAGS(func, bpf_task_get_cgroup1, KF_ACQUIRE | KF_RCU | KF_RET_NULL) #endif BTF_ID_FLAGS(func, bpf_task_from_pid, KF_ACQUIRE | KF_RET_NULL) BTF_ID_FLAGS(func, bpf_throw) +BTF_ID_FLAGS(func, bpf_timer_set_sleepable_cb) BTF_KFUNCS_END(generic_btf_ids) static const struct btf_kfunc_id_set generic_kfunc_set = { diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 7831adba9abf..67da3f7bddb5 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -503,6 +503,8 @@ static bool is_dynptr_ref_function(enum bpf_func_id func_id) static bool is_sync_callback_calling_kfunc(u32 btf_id); static bool is_bpf_throw_kfunc(struct bpf_insn *insn); +static bool is_bpf_timer_set_sleepable_cb_kfunc(u32 btf_id); + static bool is_sync_callback_calling_function(enum bpf_func_id func_id) { return func_id == BPF_FUNC_for_each_map_elem || @@ -513,7 +515,8 @@ static bool is_sync_callback_calling_function(enum bpf_func_id func_id) static bool is_async_callback_calling_function(enum bpf_func_id func_id) { - return func_id == BPF_FUNC_timer_set_callback; + return func_id == BPF_FUNC_timer_set_callback || + is_bpf_timer_set_sleepable_cb_kfunc(func_id); } static bool is_callback_calling_function(enum bpf_func_id func_id) @@ -1414,6 +1417,7 @@ static int copy_verifier_state(struct bpf_verifier_state *dst_state, } dst_state->speculative = src->speculative; dst_state->active_rcu_lock = src->active_rcu_lock; + dst_state->in_sleepable = src->in_sleepable; dst_state->curframe = src->curframe; dst_state->active_lock.ptr = src->active_lock.ptr; dst_state->active_lock.id = src->active_lock.id; @@ -2413,6 +2417,7 @@ static struct bpf_verifier_state *push_async_cb(struct bpf_verifier_env *env, * Initialize it similar to do_check_common(). */ elem->st.branches = 1; + elem->st.in_sleepable = env->subprog_info[subprog].is_sleepable; frame = kzalloc(sizeof(*frame), GFP_KERNEL); if (!frame) goto err; @@ -5257,7 +5262,8 @@ static int map_kptr_match_type(struct bpf_verifier_env *env, static bool in_sleepable(struct bpf_verifier_env *env) { - return env->prog->aux->sleepable; + return env->prog->aux->sleepable || + (env->cur_state && env->cur_state->in_sleepable); } /* The non-sleepable programs and sleepable programs with explicit bpf_rcu_read_lock() @@ -5439,6 +5445,26 @@ static int check_map_access(struct bpf_verifier_env *env, u32 regno, return -EACCES; } break; + case BPF_TIMER: + /* FIXME: kptr does the above, should we use the same? */ + if (src != ACCESS_DIRECT) { + verbose(env, "bpf_timer cannot be accessed indirectly by helper\n"); + return -EACCES; + } + if (!tnum_is_const(reg->var_off)) { + verbose(env, "bpf_timer access cannot have variable offset\n"); + return -EACCES; + } + if (p != off + reg->var_off.value) { + verbose(env, "bpf_timer access misaligned expected=%u off=%llu\n", + p, off + reg->var_off.value); + return -EACCES; + } + if (size != bpf_size_to_bytes(BPF_DW)) { + verbose(env, "bpf_timer access size must be BPF_DW\n"); + return -EACCES; + } + break; default: verbose(env, "%s cannot be accessed directly by load/store\n", btf_field_type_name(field->type)); @@ -9439,11 +9465,13 @@ static int push_callback_call(struct bpf_verifier_env *env, struct bpf_insn *ins if (insn->code == (BPF_JMP | BPF_CALL) && insn->src_reg == 0 && - insn->imm == BPF_FUNC_timer_set_callback) { + (insn->imm == BPF_FUNC_timer_set_callback || + is_bpf_timer_set_sleepable_cb_kfunc(insn->imm))) { struct bpf_verifier_state *async_cb; /* there is no real recursion here. timer callbacks are async */ env->subprog_info[subprog].is_async_cb = true; + env->subprog_info[subprog].is_sleepable = is_bpf_timer_set_sleepable_cb_kfunc(insn->imm); async_cb = push_async_cb(env, env->subprog_info[subprog].start, insn_idx, subprog); if (!async_cb) @@ -10412,6 +10440,10 @@ static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn break; } + if (is_bpf_timer_set_sleepable_cb_kfunc(func_id)) + err = push_callback_call(env, insn, insn_idx, meta.subprogno, + set_timer_callback_state); + if (err) return err; @@ -10789,6 +10821,7 @@ enum { KF_ARG_LIST_NODE_ID, KF_ARG_RB_ROOT_ID, KF_ARG_RB_NODE_ID, + KF_ARG_TIMER_ID, }; BTF_ID_LIST(kf_arg_btf_ids) @@ -10797,6 +10830,7 @@ BTF_ID(struct, bpf_list_head) BTF_ID(struct, bpf_list_node) BTF_ID(struct, bpf_rb_root) BTF_ID(struct, bpf_rb_node) +BTF_ID(struct, bpf_timer_kern) static bool __is_kfunc_ptr_arg_type(const struct btf *btf, const struct btf_param *arg, int type) @@ -10840,6 +10874,12 @@ static bool is_kfunc_arg_rbtree_node(const struct btf *btf, const struct btf_par return __is_kfunc_ptr_arg_type(btf, arg, KF_ARG_RB_NODE_ID); } +static bool is_kfunc_arg_timer(const struct btf *btf, const struct btf_param *arg) +{ + bool ret = __is_kfunc_ptr_arg_type(btf, arg, KF_ARG_TIMER_ID); + return ret; +} + static bool is_kfunc_arg_callback(struct bpf_verifier_env *env, const struct btf *btf, const struct btf_param *arg) { @@ -10908,6 +10948,7 @@ enum kfunc_ptr_arg_type { KF_ARG_PTR_TO_RB_NODE, KF_ARG_PTR_TO_NULL, KF_ARG_PTR_TO_CONST_STR, + KF_ARG_PTR_TO_TIMER, }; enum special_kfunc_type { @@ -10934,6 +10975,7 @@ enum special_kfunc_type { KF_bpf_percpu_obj_drop_impl, KF_bpf_throw, KF_bpf_iter_css_task_new, + KF_bpf_timer_set_sleepable_cb, }; BTF_SET_START(special_kfunc_set) @@ -10960,6 +11002,7 @@ BTF_ID(func, bpf_throw) #ifdef CONFIG_CGROUPS BTF_ID(func, bpf_iter_css_task_new) #endif +BTF_ID(func, bpf_timer_set_sleepable_cb) BTF_SET_END(special_kfunc_set) BTF_ID_LIST(special_kfunc_list) @@ -10990,6 +11033,7 @@ BTF_ID(func, bpf_iter_css_task_new) #else BTF_ID_UNUSED #endif +BTF_ID(func, bpf_timer_set_sleepable_cb) static bool is_kfunc_ret_null(struct bpf_kfunc_call_arg_meta *meta) { @@ -11061,6 +11105,9 @@ get_kfunc_ptr_arg_type(struct bpf_verifier_env *env, if (is_kfunc_arg_const_str(meta->btf, &args[argno])) return KF_ARG_PTR_TO_CONST_STR; + if (is_kfunc_arg_timer(meta->btf, &args[argno])) + return KF_ARG_PTR_TO_TIMER; + if ((base_type(reg->type) == PTR_TO_BTF_ID || reg2btf_ids[base_type(reg->type)])) { if (!btf_type_is_struct(ref_t)) { verbose(env, "kernel function %s args#%d pointer type %s %s is not supported\n", @@ -11318,6 +11365,11 @@ static bool is_bpf_throw_kfunc(struct bpf_insn *insn) insn->imm == special_kfunc_list[KF_bpf_throw]; } +static bool is_bpf_timer_set_sleepable_cb_kfunc(u32 btf_id) +{ + return btf_id == special_kfunc_list[KF_bpf_timer_set_sleepable_cb]; +} + static bool is_rbtree_lock_required_kfunc(u32 btf_id) { return is_bpf_rbtree_api_kfunc(btf_id); @@ -11693,6 +11745,7 @@ static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_ case KF_ARG_PTR_TO_CALLBACK: case KF_ARG_PTR_TO_REFCOUNTED_KPTR: case KF_ARG_PTR_TO_CONST_STR: + case KF_ARG_PTR_TO_TIMER: /* Trusted by default */ break; default: @@ -11973,6 +12026,9 @@ static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_ if (ret) return ret; break; + case KF_ARG_PTR_TO_TIMER: + /* FIXME: should we do anything here? */ + break; } } @@ -15591,7 +15647,9 @@ static int visit_insn(int t, struct bpf_verifier_env *env) return DONE_EXPLORING; case BPF_CALL: - if (insn->src_reg == 0 && insn->imm == BPF_FUNC_timer_set_callback) + if (insn->src_reg == 0 && + (insn->imm == BPF_FUNC_timer_set_callback || + is_bpf_timer_set_sleepable_cb_kfunc(insn->imm))) /* Mark this call insn as a prune point to trigger * is_state_visited() check before call itself is * processed by __check_func_call(). Otherwise new @@ -16767,6 +16825,9 @@ static bool states_equal(struct bpf_verifier_env *env, if (old->active_rcu_lock != cur->active_rcu_lock) return false; + if (old->in_sleepable != cur->in_sleepable) + return false; + /* for states to be equal callsites have to be the same * and all frame states need to be equivalent */ @@ -19644,7 +19705,8 @@ static int do_misc_fixups(struct bpf_verifier_env *env) continue; } - if (insn->imm == BPF_FUNC_timer_set_callback) { + if (insn->imm == BPF_FUNC_timer_set_callback || + is_bpf_timer_set_sleepable_cb_kfunc(insn->imm)) { /* The verifier will process callback_fn as many times as necessary * with different maps and the register states prepared by * set_timer_callback_state will be accurate.
They are implemented as a kfunc, which means a little bit of tweaks in the verifier. Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> --- changes in v2 (compared to the one attaches to v1 0/9): - make use of a kfunc - add a (non-used) BPF_F_TIMER_SLEEPABLE - the callback is *not* called, it makes the kernel crashes --- include/linux/bpf_verifier.h | 2 + include/uapi/linux/bpf.h | 12 +++++ kernel/bpf/helpers.c | 105 ++++++++++++++++++++++++++++++++++++++++--- kernel/bpf/verifier.c | 72 ++++++++++++++++++++++++++--- 4 files changed, 180 insertions(+), 11 deletions(-)