diff mbox series

[net-next,v5,7/9] stmmac: intel: configure SerDes according to the interface mode

Message ID 20240215030500.3067426-8-yong.liang.choong@linux.intel.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series Enable SGMII and 2500BASEX interface mode switching for Intel platforms | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 989 this patch: 989
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers warning 1 maintainers not CCed: joabreu@synopsys.com
netdev/build_clang success Errors and warnings before: 1006 this patch: 1006
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1006 this patch: 1006
netdev/checkpatch warning WARNING: line length of 81 exceeds 80 columns WARNING: line length of 83 exceeds 80 columns WARNING: line length of 84 exceeds 80 columns WARNING: line length of 86 exceeds 80 columns WARNING: line length of 87 exceeds 80 columns WARNING: line length of 88 exceeds 80 columns WARNING: line length of 89 exceeds 80 columns WARNING: line length of 90 exceeds 80 columns WARNING: line length of 92 exceeds 80 columns
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/contest success net-next-2024-02-16--06-00 (tests: 1443)

Commit Message

Choong Yong Liang Feb. 15, 2024, 3:04 a.m. UTC
From: "Tan, Tee Min" <tee.min.tan@linux.intel.com>

Intel platform will configure the SerDes through PMC api based on the
provided interface mode.

This patch adds several new functions below:-
- intel_tsn_interface_is_available(): This new function reads FIA lane
  ownership registers and common lane registers through IPC commands
  to know which lane the mGbE port is assigned to.
- intel_config_serdes(): To configure the SerDes based on the assigned
  lane and latest interface mode, it sends IPC command to the PMC through
  PMC driver/API. The PMC acts as a proxy for R/W on behalf of the driver.
- intel_set_reg_access(): Set the register access to the available TSN
  interface.

Signed-off-by: Tan, Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |   2 +
 .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 115 +++++++++++++++++-
 .../net/ethernet/stmicro/stmmac/dwmac-intel.h |  75 ++++++++++++
 3 files changed, 191 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 4ec61f1ee71a..25405c305a21 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -273,6 +273,8 @@  config DWMAC_INTEL
 	default X86
 	depends on X86 && STMMAC_ETH && PCI
 	depends on COMMON_CLK
+	depends on ACPI
+	select INTEL_PMC_IPC
 	help
 	  This selects the Intel platform specific bus support for the
 	  stmmac driver. This driver is used for Intel Quark/EHL/TGL.
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 6f12e80b8a05..74cc0aa96faf 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -5,6 +5,7 @@ 
 #include <linux/clk-provider.h>
 #include <linux/pci.h>
 #include <linux/dmi.h>
+#include <linux/platform_data/x86/intel_pmc_ipc.h>
 #include "dwmac-intel.h"
 #include "dwmac4.h"
 #include "stmmac.h"
@@ -14,6 +15,9 @@  struct intel_priv_data {
 	int mdio_adhoc_addr;	/* mdio address for serdes & etc */
 	unsigned long crossts_adj;
 	bool is_pse;
+	const int *tsn_lane_registers;
+	int max_tsn_lane_registers;
+	int pid_modphy;
 };
 
 /* This struct is used to associate PCI Function of MAC controller on a board,
@@ -93,7 +97,7 @@  static int intel_serdes_powerup(struct net_device *ndev, void *priv_data)
 	data &= ~SERDES_RATE_MASK;
 	data &= ~SERDES_PCLK_MASK;
 
-	if (priv->plat->max_speed == 2500)
+	if (priv->plat->phy_interface == PHY_INTERFACE_MODE_2500BASEX)
 		data |= SERDES_RATE_PCIE_GEN2 << SERDES_RATE_PCIE_SHIFT |
 			SERDES_PCLK_37p5MHZ << SERDES_PCLK_SHIFT;
 	else
@@ -447,6 +451,103 @@  static unsigned int intel_get_pcs_neg_mode(phy_interface_t interface,
 	return neg_mode;
 }
 
+static bool intel_tsn_interface_is_available(struct net_device *ndev,
+					     struct intel_priv_data *intel_priv)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	struct pmc_ipc_cmd tmp = {0};
+	u32 rbuf[4] = {0};
+	int ret, i, j;
+
+	if (priv->plat->serdes_powerup) {
+		tmp.cmd = IPC_SOC_REGISTER_ACCESS;
+		tmp.sub_cmd = IPC_SOC_SUB_CMD_READ;
+
+		for (i = 0; i < 5; i++) {
+			tmp.wbuf[0] = R_PCH_FIA_15_PCR_LOS1_REG_BASE + i;
+
+			ret = intel_pmc_ipc(&tmp, rbuf);
+			if (ret < 0) {
+				netdev_info(priv->dev,
+					    "Failed to read from PMC.\n");
+				return false;
+			}
+
+			for (j = 0; j <= intel_priv->max_tsn_lane_registers; j++)
+				if ((rbuf[0] >>
+				    (4 * (intel_priv->tsn_lane_registers[j] % 8)) &
+				     B_PCH_FIA_PCR_L0O) == 0xB)
+					return true;
+		}
+	}
+	return false;
+}
+
+static int intel_set_reg_access(const struct pmc_serdes_regs *regs, int max_regs)
+{
+	int ret = 0, i;
+
+	for (i = 0; i < max_regs; i++) {
+		struct pmc_ipc_cmd tmp = {0};
+		u32 buf[4] = {0};
+
+		tmp.cmd = IPC_SOC_REGISTER_ACCESS;
+		tmp.sub_cmd = IPC_SOC_SUB_CMD_WRITE;
+		tmp.wbuf[0] = (u32)regs[i].index;
+		tmp.wbuf[1] = regs[i].val;
+
+		ret = intel_pmc_ipc(&tmp, buf);
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret;
+}
+
+static int intel_config_serdes(struct net_device *ndev,
+			       void *intel_data,
+			       phy_interface_t interface)
+{
+	struct intel_priv_data *intel_priv = intel_data;
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	int ret = 0;
+
+	if (!intel_tsn_interface_is_available(ndev, intel_priv)) {
+		netdev_info(priv->dev,
+			    "No TSN interface available to set the registers.\n");
+		goto pmc_read_error;
+	}
+
+	if (intel_priv->pid_modphy == PID_MODPHY1) {
+		if (interface == PHY_INTERFACE_MODE_2500BASEX) {
+			ret = intel_set_reg_access(pid_modphy1_2p5g_regs,
+						   ARRAY_SIZE(pid_modphy1_2p5g_regs));
+		} else {
+			ret = intel_set_reg_access(pid_modphy1_1g_regs,
+						   ARRAY_SIZE(pid_modphy1_1g_regs));
+		}
+	} else {
+		if (interface == PHY_INTERFACE_MODE_2500BASEX) {
+			ret = intel_set_reg_access(pid_modphy3_2p5g_regs,
+						   ARRAY_SIZE(pid_modphy3_2p5g_regs));
+		} else {
+			ret = intel_set_reg_access(pid_modphy3_1g_regs,
+						   ARRAY_SIZE(pid_modphy3_1g_regs));
+		}
+	}
+
+	priv->plat->phy_interface = interface;
+
+	if (ret < 0)
+		goto pmc_read_error;
+
+pmc_read_error:
+	intel_serdes_powerdown(ndev, intel_priv);
+	intel_serdes_powerup(ndev, intel_priv);
+
+	return ret;
+}
+
 static void common_default_data(struct plat_stmmacenet_data *plat)
 {
 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
@@ -622,6 +723,15 @@  static int intel_mgbe_common_data(struct pci_dev *pdev,
 		plat->mdio_bus_data->xpcs_an_inband = true;
 	}
 
+	/* When the platform is able to switch between PHY_INTERFACE_MODE_SGMII
+	 * and PHY_INTERFACE_MODE_2500BASEX interfaces, we clear xpcs_an_inband
+	 * for PHY_INTERFACE_MODE_2500BASEX interface
+	 */
+	if (plat->phy_interface == PHY_INTERFACE_MODE_SGMII &&
+	    plat->max_speed == 2500) {
+		plat->mdio_bus_data->xpcs_an_inband = false;
+	}
+
 	/* For fixed-link setup, we clear xpcs_an_inband */
 	if (is_fixed_link(pdev))
 		plat->mdio_bus_data->xpcs_an_inband = false;
@@ -676,6 +786,7 @@  static int ehl_sgmii_data(struct pci_dev *pdev,
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
 	plat->get_pcs_neg_mode = intel_get_pcs_neg_mode;
+	plat->config_serdes = intel_config_serdes;
 	plat->clk_ptp_rate = 204800000;
 
 	return ehl_common_data(pdev, plat);
@@ -735,6 +846,7 @@  static int ehl_pse0_sgmii1g_data(struct pci_dev *pdev,
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
 	plat->get_pcs_neg_mode = intel_get_pcs_neg_mode;
+	plat->config_serdes = intel_config_serdes;
 	return ehl_pse0_common_data(pdev, plat);
 }
 
@@ -777,6 +889,7 @@  static int ehl_pse1_sgmii1g_data(struct pci_dev *pdev,
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
 	plat->get_pcs_neg_mode = intel_get_pcs_neg_mode;
+	plat->config_serdes = intel_config_serdes;
 	return ehl_pse1_common_data(pdev, plat);
 }
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
index 0a37987478c1..79c35ba969ea 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
@@ -50,4 +50,79 @@ 
 #define PCH_PTP_CLK_FREQ_19_2MHZ	(GMAC_GPO0)
 #define PCH_PTP_CLK_FREQ_200MHZ		(0)
 
+#define	PID_MODPHY1 0xAA
+#define	PID_MODPHY3 0xA8
+
+#if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
+struct pmc_serdes_regs {
+	u8 index;
+	u32 val;
+};
+
+/* Modphy Register index */
+#define R_PCH_FIA_15_PCR_LOS1_REG_BASE			8
+#define R_PCH_FIA_15_PCR_LOS2_REG_BASE			9
+#define R_PCH_FIA_15_PCR_LOS3_REG_BASE			10
+#define R_PCH_FIA_15_PCR_LOS4_REG_BASE			11
+#define R_PCH_FIA_15_PCR_LOS5_REG_BASE			12
+#define B_PCH_FIA_PCR_L0O				GENMASK(3, 0)
+#define PID_MODPHY1_B_MODPHY_PCR_LCPLL_DWORD0		13
+#define PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD2		14
+#define PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD7		15
+#define PID_MODPHY1_N_MODPHY_PCR_LPPLL_DWORD10		16
+#define PID_MODPHY1_N_MODPHY_PCR_CMN_ANA_DWORD30	17
+#define PID_MODPHY3_B_MODPHY_PCR_LCPLL_DWORD0		18
+#define PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD2		19
+#define PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD7		20
+#define PID_MODPHY3_N_MODPHY_PCR_LPPLL_DWORD10		21
+#define PID_MODPHY3_N_MODPHY_PCR_CMN_ANA_DWORD30	22
+
+#define B_MODPHY_PCR_LCPLL_DWORD0_1G		0x46AAAA41
+#define N_MODPHY_PCR_LCPLL_DWORD2_1G		0x00000139
+#define N_MODPHY_PCR_LCPLL_DWORD7_1G		0x002A0003
+#define N_MODPHY_PCR_LPPLL_DWORD10_1G		0x00170008
+#define N_MODPHY_PCR_CMN_ANA_DWORD30_1G		0x0000D4AC
+#define B_MODPHY_PCR_LCPLL_DWORD0_2P5G		0x58555551
+#define N_MODPHY_PCR_LCPLL_DWORD2_2P5G		0x0000012D
+#define N_MODPHY_PCR_LCPLL_DWORD7_2P5G		0x001F0003
+#define N_MODPHY_PCR_LPPLL_DWORD10_2P5G		0x00170008
+#define N_MODPHY_PCR_CMN_ANA_DWORD30_2P5G	0x8200ACAC
+
+static const struct pmc_serdes_regs pid_modphy3_1g_regs[] = {
+	{ PID_MODPHY3_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_1G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_1G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_1G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_1G },
+	{ PID_MODPHY3_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_1G },
+	{}
+};
+
+static const struct pmc_serdes_regs pid_modphy3_2p5g_regs[] = {
+	{ PID_MODPHY3_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_2P5G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_2P5G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_2P5G },
+	{ PID_MODPHY3_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_2P5G },
+	{ PID_MODPHY3_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_2P5G },
+	{}
+};
+
+static const struct pmc_serdes_regs pid_modphy1_1g_regs[] = {
+	{ PID_MODPHY1_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_1G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_1G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_1G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_1G },
+	{ PID_MODPHY1_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_1G },
+	{}
+};
+
+static const struct pmc_serdes_regs pid_modphy1_2p5g_regs[] = {
+	{ PID_MODPHY1_B_MODPHY_PCR_LCPLL_DWORD0,	B_MODPHY_PCR_LCPLL_DWORD0_2P5G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD2,	N_MODPHY_PCR_LCPLL_DWORD2_2P5G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LCPLL_DWORD7,	N_MODPHY_PCR_LCPLL_DWORD7_2P5G },
+	{ PID_MODPHY1_N_MODPHY_PCR_LPPLL_DWORD10,	N_MODPHY_PCR_LPPLL_DWORD10_2P5G },
+	{ PID_MODPHY1_N_MODPHY_PCR_CMN_ANA_DWORD30,	N_MODPHY_PCR_CMN_ANA_DWORD30_2P5G },
+	{}
+};
+#endif /* CONFIG_INTEL_PMC_IPC */
+
 #endif /* __DWMAC_INTEL_H__ */