@@ -386,12 +386,19 @@ Sample userspace code:
- Create session PPPoX data socket::
+ /* Input: the L2TP tunnel UDP socket `tunnel_fd`, which needs to be
+ * bound already (both sockname and peername), otherwise it will not be
+ * ready.
+ */
+
struct sockaddr_pppol2tp sax;
- int fd;
+ int session_fd;
+ int ret;
+
+ session_fd = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
+ if (session_fd < 0)
+ return -errno;
- /* Note, the tunnel socket must be bound already, else it
- * will not be ready
- */
sax.sa_family = AF_PPPOX;
sax.sa_protocol = PX_PROTO_OL2TP;
sax.pppol2tp.fd = tunnel_fd;
@@ -406,12 +413,128 @@ Sample userspace code:
/* session_fd is the fd of the session's PPPoL2TP socket.
* tunnel_fd is the fd of the tunnel UDP / L2TPIP socket.
*/
- fd = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax));
- if (fd < 0 ) {
+ ret = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax));
+ if (ret < 0 ) {
+ close(session_fd);
+ return -errno;
+ }
+
+ return session_fd;
+
+L2TP control packets will still be available for read on `tunnel_fd`.
+
+ - Create PPP channel::
+
+ /* Input: the session PPPoX data socket `session_fd` which was created
+ * as described above.
+ */
+
+ int ppp_chan_fd;
+ int chindx;
+ int ret;
+
+ ret = ioctl(session_fd, PPPIOCGCHAN, &chindx);
+ if (ret < 0)
+ return -errno;
+
+ ppp_chan_fd = open("/dev/ppp", O_RDWR);
+ if (ppp_chan_fd < 0)
+ return -errno;
+
+ ret = ioctl(ppp_chan_fd, PPPIOCATTCHAN, &chindx);
+ if (ret < 0) {
+ close(ppp_chan_fd);
return -errno;
}
+
+ return ppp_chan_fd;
+
+LCP PPP frames will be available for read on `ppp_chan_fd`.
+
+ - Create PPP interface::
+
+ /* Input: the PPP channel `ppp_chan_fd` which was created as described
+ * above.
+ */
+
+ int ifunit = -1;
+ int ppp_if_fd;
+ int ret;
+
+ ppp_if_fd = open("/dev/ppp", O_RDWR);
+ if (ppp_if_fd < 0)
+ return -errno;
+
+ ret = ioctl(ppp_if_fd, PPPIOCNEWUNIT, &ifunit);
+ if (ret < 0) {
+ close(ppp_if_fd);
+ return -errno;
+ }
+
+ ret = ioctl(ppp_chan_fd, PPPIOCCONNECT, &ifunit);
+ if (ret < 0) {
+ close(ppp_if_fd);
+ return -errno;
+ }
+
+ return ppp_if_fd;
+
+IPCP/IPv6CP PPP frames will be available for read on `ppp_if_fd`.
+
+The ppp<ifunit> interface can then be configured as usual with netlink's
+RTM_NEWLINK, RTM_NEWADDR, RTM_NEWROUTE, or ioctl's SIOCSIFMTU, SIOCSIFADDR,
+SIOCSIFDSTADDR, SIOCSIFNETMASK, SIOCSIFFLAGS, or with the `ip` command.
+
+ - Bridging L2TP sessions which have PPP pseudowire types (this is also called
+ L2TP tunnel switching or L2TP multihop) is supported by bridging the PPP
+ channels of the two L2TP sessions to be bridged::
+
+ /* Input: the session PPPoX data sockets `session_fd1` and `session_fd2`
+ * which were created as described further above.
+ */
+
+ int ppp_chan_fd;
+ int chindx1;
+ int chindx2;
+ int ret;
+
+ ret = ioctl(session_fd1, PPPIOCGCHAN, &chindx1);
+ if (ret < 0)
+ return -errno;
+
+ ret = ioctl(session_fd2, PPPIOCGCHAN, &chindx2);
+ if (ret < 0)
+ return -errno;
+
+ ppp_chan_fd = open("/dev/ppp", O_RDWR);
+ if (ppp_chan_fd < 0)
+ return -errno;
+
+ ret = ioctl(ppp_chan_fd, PPPIOCATTCHAN, &chindx1);
+ if (ret < 0) {
+ close(ppp_chan_fd);
+ return -errno;
+ }
+
+ ret = ioctl(ppp_chan_fd, PPPIOCBRIDGECHAN, &chindx2);
+ close(ppp_chan_fd);
+ if (ret < 0)
+ return -errno;
+
return 0;
+It can be noted that when bridging PPP channels, the PPP session is not locally
+terminated, and no local PPP interface is created. PPP frames arriving on one
+channel are directly passed to the other channel, and vice versa.
+
+The PPP channel does not need to be kept open. Only the session PPPoX data
+sockets need to be kept open.
+
+More generally, it is also possible in the same way to e.g. bridge a PPPoL2TP
+PPP channel with other types of PPP channels, such as PPPoE.
+
+See more details for the PPP side in ppp_generic.rst.
+
Old L2TPv2-only API
-------------------