Message ID | 20240227223305.910452-4-niklas.soderlund+renesas@ragnatech.se (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | ravb: Align Rx descriptor setup and maintenance | expand |
On 27/02/2024 22:33, Niklas Söderlund wrote: > The RAVB device requires the SKB data to be aligned to 128 bytes. The > alignment is done by allocating a skb 128 bytes larger than the maximum > frame size supported by the device and adjusting the headroom to fit the > requirement. > > This code has been refactored a few times and small issues have been > added along the way. The issues are not harmful but prevents merging > parts of the Rx code which have been split in two implementations with > the addition of RZ/G2L support, a device that supports larger frame > sizes. > > This change removes the need for duplicated and somewhat inaccurate > hardware alignment constrains stored in the hardware information struct > by creating a helper to handle the allocation of a skb and alignment of > a skb data. > > For the R-Car class of devices the maximum frame size is 4K and each > descriptor is limited to 2K of data. The current implementation does not > support split descriptors, this limits the frame size to 2K. The > current hardware information however records the descriptor size just > under 2K due to bad understanding of the device when larger MTUs where > added. > > For the RZ/G2L device the maximum frame size is 8K and each descriptor > is limited to 4K of data. The current hardware information records this > correctly, but it gets the alignment constrains wrong as just aligns it > by 128, it does not extend it by 128 bytes to allow the full frame to be > stored. This works because the RZ/G2L device supports split descriptors > and allocates each skb to 8K and aligns each 4K descriptor in this > space. > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > --- > * Changes since v1 > - Add a GFP mask argument to ravb_alloc_skb() to preserve GFP_KERNEL at > init time. > --- > drivers/net/ethernet/renesas/ravb.h | 1 - > drivers/net/ethernet/renesas/ravb_main.c | 43 +++++++++++++----------- > 2 files changed, 24 insertions(+), 20 deletions(-) > > diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h > index 7f9e8b2c012a..751bb29cd488 100644 > --- a/drivers/net/ethernet/renesas/ravb.h > +++ b/drivers/net/ethernet/renesas/ravb.h > @@ -1057,7 +1057,6 @@ struct ravb_hw_info { > netdev_features_t net_hw_features; > netdev_features_t net_features; > int stats_len; > - size_t max_rx_len; > u32 tccr_mask; > u32 rx_max_frame_size; > unsigned aligned_tx: 1; > diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c > index 5c72b780d623..e6b025058847 100644 > --- a/drivers/net/ethernet/renesas/ravb_main.c > +++ b/drivers/net/ethernet/renesas/ravb_main.c > @@ -113,12 +113,23 @@ static void ravb_set_rate_rcar(struct net_device *ndev) > } > } > > -static void ravb_set_buffer_align(struct sk_buff *skb) > +static struct sk_buff * > +ravb_alloc_skb(struct net_device *ndev, const struct ravb_hw_info *info, > + gfp_t gfp_mask) > { > - u32 reserve = (unsigned long)skb->data & (RAVB_ALIGN - 1); > + struct sk_buff *skb; > + u32 reserve; > > + skb = __netdev_alloc_skb(ndev, info->rx_max_frame_size + RAVB_ALIGN - 1, > + gfp_mask); > + if (!skb) > + return NULL; > + > + reserve = (unsigned long)skb->data & (RAVB_ALIGN - 1); > if (reserve) > skb_reserve(skb, RAVB_ALIGN - reserve); > + > + return skb; > } > > /* Get MAC address from the MAC address registers > @@ -251,7 +262,7 @@ static void ravb_rx_ring_free_gbeth(struct net_device *ndev, int q) > le32_to_cpu(desc->dptr))) > dma_unmap_single(ndev->dev.parent, > le32_to_cpu(desc->dptr), > - GBETH_RX_BUFF_MAX, > + priv->info->rx_max_frame_size, > DMA_FROM_DEVICE); > } > ring_size = sizeof(struct ravb_rx_desc) * (priv->num_rx_ring[q] + 1); > @@ -276,7 +287,7 @@ static void ravb_rx_ring_free_rcar(struct net_device *ndev, int q) > le32_to_cpu(desc->dptr))) > dma_unmap_single(ndev->dev.parent, > le32_to_cpu(desc->dptr), > - RX_BUF_SZ, > + priv->info->rx_max_frame_size, > DMA_FROM_DEVICE); > } > ring_size = sizeof(struct ravb_ex_rx_desc) * > @@ -342,7 +353,7 @@ static void ravb_rx_ring_format_gbeth(struct net_device *ndev, int q) > rx_desc = &priv->rx_ring[q].desc[i]; > rx_desc->ds_cc = cpu_to_le16(GBETH_RX_DESC_DATA_SIZE); > dma_addr = dma_map_single(ndev->dev.parent, priv->rx_skb[q][i]->data, > - GBETH_RX_BUFF_MAX, > + priv->info->rx_max_frame_size, > DMA_FROM_DEVICE); > /* We just set the data size to 0 for a failed mapping which > * should prevent DMA from happening... > @@ -372,7 +383,7 @@ static void ravb_rx_ring_format_rcar(struct net_device *ndev, int q) > rx_desc = &priv->rx_ring[q].ex_desc[i]; > rx_desc->ds_cc = cpu_to_le16(RX_BUF_SZ); > dma_addr = dma_map_single(ndev->dev.parent, priv->rx_skb[q][i]->data, > - RX_BUF_SZ, > + priv->info->rx_max_frame_size, > DMA_FROM_DEVICE); > /* We just set the data size to 0 for a failed mapping which > * should prevent DMA from happening... > @@ -476,10 +487,9 @@ static int ravb_ring_init(struct net_device *ndev, int q) > goto error; > > for (i = 0; i < priv->num_rx_ring[q]; i++) { > - skb = __netdev_alloc_skb(ndev, info->max_rx_len, GFP_KERNEL); > + skb = ravb_alloc_skb(ndev, info, GFP_KERNEL); > if (!skb) > goto error; > - ravb_set_buffer_align(skb); > priv->rx_skb[q][i] = skb; > } > > @@ -805,7 +815,8 @@ static struct sk_buff *ravb_get_skb_gbeth(struct net_device *ndev, int entry, > skb = priv->rx_skb[RAVB_BE][entry]; > priv->rx_skb[RAVB_BE][entry] = NULL; > dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr), > - ALIGN(GBETH_RX_BUFF_MAX, 16), DMA_FROM_DEVICE); > + ALIGN(priv->info->rx_max_frame_size, 16), > + DMA_FROM_DEVICE); > > return skb; > } > @@ -912,13 +923,12 @@ static bool ravb_rx_gbeth(struct net_device *ndev, int *quota, int q) > desc->ds_cc = cpu_to_le16(GBETH_RX_DESC_DATA_SIZE); > > if (!priv->rx_skb[q][entry]) { > - skb = netdev_alloc_skb(ndev, info->max_rx_len); > + skb = ravb_alloc_skb(ndev, info, GFP_ATOMIC); > if (!skb) > break; > - ravb_set_buffer_align(skb); > dma_addr = dma_map_single(ndev->dev.parent, > skb->data, > - GBETH_RX_BUFF_MAX, > + priv->info->rx_max_frame_size, > DMA_FROM_DEVICE); > skb_checksum_none_assert(skb); > /* We just set the data size to 0 for a failed mapping > @@ -992,7 +1002,7 @@ static bool ravb_rx_rcar(struct net_device *ndev, int *quota, int q) > skb = priv->rx_skb[q][entry]; > priv->rx_skb[q][entry] = NULL; > dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr), > - RX_BUF_SZ, > + priv->info->rx_max_frame_size, > DMA_FROM_DEVICE); > get_ts &= (q == RAVB_NC) ? > RAVB_RXTSTAMP_TYPE_V2_L2_EVENT : > @@ -1028,10 +1038,9 @@ static bool ravb_rx_rcar(struct net_device *ndev, int *quota, int q) > desc->ds_cc = cpu_to_le16(RX_BUF_SZ); > > if (!priv->rx_skb[q][entry]) { > - skb = netdev_alloc_skb(ndev, info->max_rx_len); > + skb = ravb_alloc_skb(ndev, info, GFP_ATOMIC); > if (!skb) > break; /* Better luck next round. */ > - ravb_set_buffer_align(skb); > dma_addr = dma_map_single(ndev->dev.parent, skb->data, > le16_to_cpu(desc->ds_cc), > DMA_FROM_DEVICE); > @@ -2682,7 +2691,6 @@ static const struct ravb_hw_info ravb_gen3_hw_info = { > .net_hw_features = NETIF_F_RXCSUM, > .net_features = NETIF_F_RXCSUM, > .stats_len = ARRAY_SIZE(ravb_gstrings_stats), > - .max_rx_len = RX_BUF_SZ + RAVB_ALIGN - 1, > .tccr_mask = TCCR_TSRQ0 | TCCR_TSRQ1 | TCCR_TSRQ2 | TCCR_TSRQ3, > .rx_max_frame_size = SZ_2K, > .internal_delay = 1, > @@ -2708,7 +2716,6 @@ static const struct ravb_hw_info ravb_gen2_hw_info = { > .net_hw_features = NETIF_F_RXCSUM, > .net_features = NETIF_F_RXCSUM, > .stats_len = ARRAY_SIZE(ravb_gstrings_stats), > - .max_rx_len = RX_BUF_SZ + RAVB_ALIGN - 1, > .tccr_mask = TCCR_TSRQ0 | TCCR_TSRQ1 | TCCR_TSRQ2 | TCCR_TSRQ3, > .rx_max_frame_size = SZ_2K, > .aligned_tx = 1, > @@ -2731,7 +2738,6 @@ static const struct ravb_hw_info ravb_rzv2m_hw_info = { > .net_hw_features = NETIF_F_RXCSUM, > .net_features = NETIF_F_RXCSUM, > .stats_len = ARRAY_SIZE(ravb_gstrings_stats), > - .max_rx_len = RX_BUF_SZ + RAVB_ALIGN - 1, > .tccr_mask = TCCR_TSRQ0 | TCCR_TSRQ1 | TCCR_TSRQ2 | TCCR_TSRQ3, > .rx_max_frame_size = SZ_2K, > .multi_irqs = 1, > @@ -2756,7 +2762,6 @@ static const struct ravb_hw_info gbeth_hw_info = { > .net_hw_features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM, > .net_features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM, > .stats_len = ARRAY_SIZE(ravb_gstrings_stats_gbeth), > - .max_rx_len = ALIGN(GBETH_RX_BUFF_MAX, RAVB_ALIGN), > .tccr_mask = TCCR_TSRQ0, > .rx_max_frame_size = SZ_8K, > .aligned_tx = 1, Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
On 2/28/24 1:33 AM, Niklas Söderlund wrote: > The RAVB device requires the SKB data to be aligned to 128 bytes. The I prefer calling it Ether[net]AVB (like the manuals do), that "ravb" is the driver's name... :-) > alignment is done by allocating a skb 128 bytes larger than the maximum s/a/an/. > frame size supported by the device and adjusting the headroom to fit the > requirement. > > This code has been refactored a few times and small issues have been > added along the way. The issues are not harmful but prevents merging Prevent. > parts of the Rx code which have been split in two implementations with > the addition of RZ/G2L support, a device that supports larger frame > sizes. > > This change removes the need for duplicated and somewhat inaccurate > hardware alignment constrains stored in the hardware information struct > by creating a helper to handle the allocation of a skb and alignment of s/a/an/. > a skb data. s/a/an/. > For the R-Car class of devices the maximum frame size is 4K and each > descriptor is limited to 2K of data. The current implementation does not > support split descriptors, this limits the frame size to 2K. The > current hardware information however records the descriptor size just > under 2K due to bad understanding of the device when larger MTUs where > added. > > For the RZ/G2L device the maximum frame size is 8K and each descriptor > is limited to 4K of data. The current hardware information records this > correctly, but it gets the alignment constrains wrong as just aligns it > by 128, it does not extend it by 128 bytes to allow the full frame to be > stored. This works because the RZ/G2L device supports split descriptors > and allocates each skb to 8K and aligns each 4K descriptor in this > space. > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> [...] > diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c > index 5c72b780d623..e6b025058847 100644 > --- a/drivers/net/ethernet/renesas/ravb_main.c > +++ b/drivers/net/ethernet/renesas/ravb_main.c [...] > @@ -372,7 +383,7 @@ static void ravb_rx_ring_format_rcar(struct net_device *ndev, int q) > rx_desc = &priv->rx_ring[q].ex_desc[i]; > rx_desc->ds_cc = cpu_to_le16(RX_BUF_SZ); Don't we need to also update this? > dma_addr = dma_map_single(ndev->dev.parent, priv->rx_skb[q][i]->data, > - RX_BUF_SZ, > + priv->info->rx_max_frame_size, > DMA_FROM_DEVICE); > /* We just set the data size to 0 for a failed mapping which > * should prevent DMA from happening... [...] MBR, Sergey
diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h index 7f9e8b2c012a..751bb29cd488 100644 --- a/drivers/net/ethernet/renesas/ravb.h +++ b/drivers/net/ethernet/renesas/ravb.h @@ -1057,7 +1057,6 @@ struct ravb_hw_info { netdev_features_t net_hw_features; netdev_features_t net_features; int stats_len; - size_t max_rx_len; u32 tccr_mask; u32 rx_max_frame_size; unsigned aligned_tx: 1; diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 5c72b780d623..e6b025058847 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -113,12 +113,23 @@ static void ravb_set_rate_rcar(struct net_device *ndev) } } -static void ravb_set_buffer_align(struct sk_buff *skb) +static struct sk_buff * +ravb_alloc_skb(struct net_device *ndev, const struct ravb_hw_info *info, + gfp_t gfp_mask) { - u32 reserve = (unsigned long)skb->data & (RAVB_ALIGN - 1); + struct sk_buff *skb; + u32 reserve; + skb = __netdev_alloc_skb(ndev, info->rx_max_frame_size + RAVB_ALIGN - 1, + gfp_mask); + if (!skb) + return NULL; + + reserve = (unsigned long)skb->data & (RAVB_ALIGN - 1); if (reserve) skb_reserve(skb, RAVB_ALIGN - reserve); + + return skb; } /* Get MAC address from the MAC address registers @@ -251,7 +262,7 @@ static void ravb_rx_ring_free_gbeth(struct net_device *ndev, int q) le32_to_cpu(desc->dptr))) dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr), - GBETH_RX_BUFF_MAX, + priv->info->rx_max_frame_size, DMA_FROM_DEVICE); } ring_size = sizeof(struct ravb_rx_desc) * (priv->num_rx_ring[q] + 1); @@ -276,7 +287,7 @@ static void ravb_rx_ring_free_rcar(struct net_device *ndev, int q) le32_to_cpu(desc->dptr))) dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr), - RX_BUF_SZ, + priv->info->rx_max_frame_size, DMA_FROM_DEVICE); } ring_size = sizeof(struct ravb_ex_rx_desc) * @@ -342,7 +353,7 @@ static void ravb_rx_ring_format_gbeth(struct net_device *ndev, int q) rx_desc = &priv->rx_ring[q].desc[i]; rx_desc->ds_cc = cpu_to_le16(GBETH_RX_DESC_DATA_SIZE); dma_addr = dma_map_single(ndev->dev.parent, priv->rx_skb[q][i]->data, - GBETH_RX_BUFF_MAX, + priv->info->rx_max_frame_size, DMA_FROM_DEVICE); /* We just set the data size to 0 for a failed mapping which * should prevent DMA from happening... @@ -372,7 +383,7 @@ static void ravb_rx_ring_format_rcar(struct net_device *ndev, int q) rx_desc = &priv->rx_ring[q].ex_desc[i]; rx_desc->ds_cc = cpu_to_le16(RX_BUF_SZ); dma_addr = dma_map_single(ndev->dev.parent, priv->rx_skb[q][i]->data, - RX_BUF_SZ, + priv->info->rx_max_frame_size, DMA_FROM_DEVICE); /* We just set the data size to 0 for a failed mapping which * should prevent DMA from happening... @@ -476,10 +487,9 @@ static int ravb_ring_init(struct net_device *ndev, int q) goto error; for (i = 0; i < priv->num_rx_ring[q]; i++) { - skb = __netdev_alloc_skb(ndev, info->max_rx_len, GFP_KERNEL); + skb = ravb_alloc_skb(ndev, info, GFP_KERNEL); if (!skb) goto error; - ravb_set_buffer_align(skb); priv->rx_skb[q][i] = skb; } @@ -805,7 +815,8 @@ static struct sk_buff *ravb_get_skb_gbeth(struct net_device *ndev, int entry, skb = priv->rx_skb[RAVB_BE][entry]; priv->rx_skb[RAVB_BE][entry] = NULL; dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr), - ALIGN(GBETH_RX_BUFF_MAX, 16), DMA_FROM_DEVICE); + ALIGN(priv->info->rx_max_frame_size, 16), + DMA_FROM_DEVICE); return skb; } @@ -912,13 +923,12 @@ static bool ravb_rx_gbeth(struct net_device *ndev, int *quota, int q) desc->ds_cc = cpu_to_le16(GBETH_RX_DESC_DATA_SIZE); if (!priv->rx_skb[q][entry]) { - skb = netdev_alloc_skb(ndev, info->max_rx_len); + skb = ravb_alloc_skb(ndev, info, GFP_ATOMIC); if (!skb) break; - ravb_set_buffer_align(skb); dma_addr = dma_map_single(ndev->dev.parent, skb->data, - GBETH_RX_BUFF_MAX, + priv->info->rx_max_frame_size, DMA_FROM_DEVICE); skb_checksum_none_assert(skb); /* We just set the data size to 0 for a failed mapping @@ -992,7 +1002,7 @@ static bool ravb_rx_rcar(struct net_device *ndev, int *quota, int q) skb = priv->rx_skb[q][entry]; priv->rx_skb[q][entry] = NULL; dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr), - RX_BUF_SZ, + priv->info->rx_max_frame_size, DMA_FROM_DEVICE); get_ts &= (q == RAVB_NC) ? RAVB_RXTSTAMP_TYPE_V2_L2_EVENT : @@ -1028,10 +1038,9 @@ static bool ravb_rx_rcar(struct net_device *ndev, int *quota, int q) desc->ds_cc = cpu_to_le16(RX_BUF_SZ); if (!priv->rx_skb[q][entry]) { - skb = netdev_alloc_skb(ndev, info->max_rx_len); + skb = ravb_alloc_skb(ndev, info, GFP_ATOMIC); if (!skb) break; /* Better luck next round. */ - ravb_set_buffer_align(skb); dma_addr = dma_map_single(ndev->dev.parent, skb->data, le16_to_cpu(desc->ds_cc), DMA_FROM_DEVICE); @@ -2682,7 +2691,6 @@ static const struct ravb_hw_info ravb_gen3_hw_info = { .net_hw_features = NETIF_F_RXCSUM, .net_features = NETIF_F_RXCSUM, .stats_len = ARRAY_SIZE(ravb_gstrings_stats), - .max_rx_len = RX_BUF_SZ + RAVB_ALIGN - 1, .tccr_mask = TCCR_TSRQ0 | TCCR_TSRQ1 | TCCR_TSRQ2 | TCCR_TSRQ3, .rx_max_frame_size = SZ_2K, .internal_delay = 1, @@ -2708,7 +2716,6 @@ static const struct ravb_hw_info ravb_gen2_hw_info = { .net_hw_features = NETIF_F_RXCSUM, .net_features = NETIF_F_RXCSUM, .stats_len = ARRAY_SIZE(ravb_gstrings_stats), - .max_rx_len = RX_BUF_SZ + RAVB_ALIGN - 1, .tccr_mask = TCCR_TSRQ0 | TCCR_TSRQ1 | TCCR_TSRQ2 | TCCR_TSRQ3, .rx_max_frame_size = SZ_2K, .aligned_tx = 1, @@ -2731,7 +2738,6 @@ static const struct ravb_hw_info ravb_rzv2m_hw_info = { .net_hw_features = NETIF_F_RXCSUM, .net_features = NETIF_F_RXCSUM, .stats_len = ARRAY_SIZE(ravb_gstrings_stats), - .max_rx_len = RX_BUF_SZ + RAVB_ALIGN - 1, .tccr_mask = TCCR_TSRQ0 | TCCR_TSRQ1 | TCCR_TSRQ2 | TCCR_TSRQ3, .rx_max_frame_size = SZ_2K, .multi_irqs = 1, @@ -2756,7 +2762,6 @@ static const struct ravb_hw_info gbeth_hw_info = { .net_hw_features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM, .net_features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM, .stats_len = ARRAY_SIZE(ravb_gstrings_stats_gbeth), - .max_rx_len = ALIGN(GBETH_RX_BUFF_MAX, RAVB_ALIGN), .tccr_mask = TCCR_TSRQ0, .rx_max_frame_size = SZ_8K, .aligned_tx = 1,
The RAVB device requires the SKB data to be aligned to 128 bytes. The alignment is done by allocating a skb 128 bytes larger than the maximum frame size supported by the device and adjusting the headroom to fit the requirement. This code has been refactored a few times and small issues have been added along the way. The issues are not harmful but prevents merging parts of the Rx code which have been split in two implementations with the addition of RZ/G2L support, a device that supports larger frame sizes. This change removes the need for duplicated and somewhat inaccurate hardware alignment constrains stored in the hardware information struct by creating a helper to handle the allocation of a skb and alignment of a skb data. For the R-Car class of devices the maximum frame size is 4K and each descriptor is limited to 2K of data. The current implementation does not support split descriptors, this limits the frame size to 2K. The current hardware information however records the descriptor size just under 2K due to bad understanding of the device when larger MTUs where added. For the RZ/G2L device the maximum frame size is 8K and each descriptor is limited to 4K of data. The current hardware information records this correctly, but it gets the alignment constrains wrong as just aligns it by 128, it does not extend it by 128 bytes to allow the full frame to be stored. This works because the RZ/G2L device supports split descriptors and allocates each skb to 8K and aligns each 4K descriptor in this space. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- * Changes since v1 - Add a GFP mask argument to ravb_alloc_skb() to preserve GFP_KERNEL at init time. --- drivers/net/ethernet/renesas/ravb.h | 1 - drivers/net/ethernet/renesas/ravb_main.c | 43 +++++++++++++----------- 2 files changed, 24 insertions(+), 20 deletions(-)