diff mbox series

[net,v2,1/2] net: fec: Set mac_managed_pm during probe

Message ID 20240229105256.2903095-2-john.ernberg@actia.se (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series net: fec: Fixes to suspend / resume with mac_managed_pm | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag present in non-next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 956 this patch: 956
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 9 of 9 maintainers
netdev/build_clang success Errors and warnings before: 973 this patch: 973
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success Fixes tag looks correct
netdev/build_allmodconfig_warn success Errors and warnings before: 973 this patch: 973
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 33 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/contest success net-next-2024-02-29--21-00 (tests: 885)

Commit Message

John Ernberg Feb. 29, 2024, 10:53 a.m. UTC 
From: Wei Fang <wei.fang@nxp.com>

Setting mac_managed_pm during interface up is too late.

In situations where the link is not brought up yet and the system suspends
the regular PHY power management will run. Since the FEC ETHEREN control
bit is cleared (automatically) on suspend the controller is off in resume.
When the regular PHY power management resume path runs in this context it
will write to the MII_DATA register but nothing will be transmitted on the
MDIO bus.

This can be observed by the following log:

    fec 5b040000.ethernet eth0: MDIO read timeout
    Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: dpm_run_callback(): mdio_bus_phy_resume+0x0/0xc8 returns -110
    Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: failed to resume: error -110

The data written will however remain in the MII_DATA register.

When the link later is brought up it will trigger a call to fec_restart()
which will restore the MII_SPEED register. This triggers the quirk
explained in f166f890c8f0 ("net: ethernet: fec: Replace interrupt driven
MDIO with polled IO") causing a MII_EVENT storm.

This event storm causes all the MDIO register reads to read as 0 because
fec_enet_mdio_wait() returns too early.

When a Microchip LAN8700R PHY is connected to the FEC, the 0 reads causes
the PHY to be initialized incorrectly and the PHY will not transmit any
ethernet signal in this state. It cannot be brought out of this state
without a power cycle of the PHY.

Fixes: 557d5dc83f68 ("net: fec: use mac-managed PHY PM")
Closes: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
[jernberg: commit message]
Signed-off-by: John Ernberg <john.ernberg@actia.se>
---

v2: New patch. Big thanks to Wei for the help on this issue.
---
 drivers/net/ethernet/freescale/fec_main.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 432523b2c789..8decb1b072c5 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2406,8 +2406,6 @@  static int fec_enet_mii_probe(struct net_device *ndev)
 	fep->link = 0;
 	fep->full_duplex = 0;
 
-	phy_dev->mac_managed_pm = true;
-
 	phy_attached_info(phy_dev);
 
 	return 0;
@@ -2419,10 +2417,12 @@  static int fec_enet_mii_init(struct platform_device *pdev)
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
 	bool suppress_preamble = false;
+	struct phy_device *phydev;
 	struct device_node *node;
 	int err = -ENXIO;
 	u32 mii_speed, holdtime;
 	u32 bus_freq;
+	int addr;
 
 	/*
 	 * The i.MX28 dual fec interfaces are not equal.
@@ -2536,6 +2536,13 @@  static int fec_enet_mii_init(struct platform_device *pdev)
 		goto err_out_free_mdiobus;
 	of_node_put(node);
 
+	/* find all the PHY devices on the bus and set mac_managed_pm to true */
+	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
+		phydev = mdiobus_get_phy(fep->mii_bus, addr);
+		if (phydev)
+			phydev->mac_managed_pm = true;
+	}
+
 	mii_cnt++;
 
 	/* save fec0 mii_bus */