@@ -129,7 +129,7 @@ static void i40e_dbg_dump_vsi_seid(struct i40e_pf *pf, int seid)
dev_info(&pf->pdev->dev,
" state[%d] = %08lx\n",
i, vsi->state[i]);
- if (vsi == pf->vsi[pf->lan_vsi])
+ if (vsi->type == I40E_VSI_MAIN)
dev_info(&pf->pdev->dev, " MAC address: %pM Port MAC: %pM\n",
pf->hw.mac.addr,
pf->hw.mac.port_addr);
@@ -1241,7 +1241,7 @@ static int i40e_set_link_ksettings(struct net_device *netdev,
i40e_partition_setting_complaint(pf);
return -EOPNOTSUPP;
}
- if (vsi != pf->vsi[pf->lan_vsi])
+ if (vsi->type != I40E_VSI_MAIN)
return -EOPNOTSUPP;
if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET &&
hw->phy.media_type != I40E_MEDIA_TYPE_FIBER &&
@@ -1710,7 +1710,7 @@ static int i40e_set_pauseparam(struct net_device *netdev,
return -EOPNOTSUPP;
}
- if (vsi != pf->vsi[pf->lan_vsi])
+ if (vsi->type != I40E_VSI_MAIN)
return -EOPNOTSUPP;
is_an = hw_link_info->an_info & I40E_AQ_AN_COMPLETED;
@@ -2292,7 +2292,7 @@ static int i40e_get_stats_count(struct net_device *netdev)
struct i40e_pf *pf = vsi->back;
int stats_len;
- if (vsi == pf->vsi[pf->lan_vsi] && pf->hw.partition_id == 1)
+ if (vsi->type == I40E_VSI_MAIN && pf->hw.partition_id == 1)
stats_len = I40E_PF_STATS_LEN;
else
stats_len = I40E_VSI_STATS_LEN;
@@ -2422,7 +2422,7 @@ static void i40e_get_ethtool_stats(struct net_device *netdev,
}
rcu_read_unlock();
- if (vsi != pf->vsi[pf->lan_vsi] || pf->hw.partition_id != 1)
+ if (vsi->type != I40E_VSI_MAIN || pf->hw.partition_id != 1)
goto check_data_pointer;
veb_stats = ((pf->lan_veb != I40E_NO_VEB) &&
@@ -2495,7 +2495,7 @@ static void i40e_get_stat_strings(struct net_device *netdev, u8 *data)
"rx", i);
}
- if (vsi != pf->vsi[pf->lan_vsi] || pf->hw.partition_id != 1)
+ if (vsi->type != I40E_VSI_MAIN || pf->hw.partition_id != 1)
goto check_data_pointer;
i40e_add_stat_strings(&data, i40e_gstrings_veb_stats);
@@ -2792,7 +2792,7 @@ static int i40e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
return -EOPNOTSUPP;
}
- if (vsi != pf->vsi[pf->lan_vsi])
+ if (vsi->type != I40E_VSI_MAIN)
return -EOPNOTSUPP;
/* NVM bit on means WoL disabled for the port */
@@ -989,7 +989,7 @@ static void i40e_update_vsi_stats(struct i40e_vsi *vsi)
ns->tx_dropped = es->tx_discards;
/* pull in a couple PF stats if this is the main vsi */
- if (vsi == pf->vsi[pf->lan_vsi]) {
+ if (vsi->type == I40E_VSI_MAIN) {
ns->rx_crc_errors = pf->stats.crc_errors;
ns->rx_errors = pf->stats.crc_errors + pf->stats.illegal_bytes;
ns->rx_length_errors = pf->stats.rx_length_errors;
@@ -1234,7 +1234,7 @@ void i40e_update_stats(struct i40e_vsi *vsi)
{
struct i40e_pf *pf = vsi->back;
- if (vsi == pf->vsi[pf->lan_vsi])
+ if (vsi->type == I40E_VSI_MAIN)
i40e_update_pf_stats(pf);
i40e_update_vsi_stats(vsi);
@@ -6819,7 +6819,7 @@ static void i40e_dcb_reconfigure(struct i40e_pf *pf)
/* - Enable all TCs for the LAN VSI
* - For all others keep them at TC0 for now
*/
- if (v == pf->lan_vsi)
+ if (vsi->type == I40E_VSI_MAIN)
tc_map = i40e_pf_get_tc_map(pf);
else
tc_map = I40E_DEFAULT_TRAFFIC_CLASS;
@@ -9126,7 +9126,7 @@ int i40e_vsi_open(struct i40e_vsi *vsi)
i40e_vsi_free_rx_resources(vsi);
err_setup_tx:
i40e_vsi_free_tx_resources(vsi);
- if (vsi == pf->vsi[pf->lan_vsi])
+ if (vsi->type == I40E_VSI_MAIN)
i40e_do_reset(pf, I40E_PF_RESET_FLAG, true);
return err;
@@ -12001,7 +12001,7 @@ static int i40e_vsi_alloc_q_vectors(struct i40e_vsi *vsi)
/* if not MSIX, give the one vector only to the LAN VSI */
if (test_bit(I40E_FLAG_MSIX_ENA, pf->flags))
num_q_vectors = vsi->num_q_vectors;
- else if (vsi == pf->vsi[pf->lan_vsi])
+ else if (vsi->type == I40E_VSI_MAIN)
num_q_vectors = 1;
else
return -EINVAL;
@@ -13118,7 +13118,7 @@ static int i40e_ndo_bridge_setlink(struct net_device *dev,
int rem;
/* Only for PF VSI for now */
- if (vsi->seid != pf->vsi[pf->lan_vsi]->seid)
+ if (vsi->type != I40E_VSI_MAIN)
return -EOPNOTSUPP;
/* Find the HW bridge for PF VSI */
@@ -13190,7 +13190,7 @@ static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
struct i40e_veb *veb;
/* Only for PF VSI for now */
- if (vsi->seid != pf->vsi[pf->lan_vsi]->seid)
+ if (vsi->type != I40E_VSI_MAIN)
return -EOPNOTSUPP;
/* Find the HW bridge for the PF VSI */
@@ -14142,8 +14142,7 @@ int i40e_vsi_release(struct i40e_vsi *vsi)
vsi->seid, vsi->uplink_seid);
return -ENODEV;
}
- if (vsi == pf->vsi[pf->lan_vsi] &&
- !test_bit(__I40E_DOWN, pf->state)) {
+ if (vsi->type == I40E_VSI_MAIN && !test_bit(__I40E_DOWN, pf->state)) {
dev_info(&pf->pdev->dev, "Can't remove PF VSI\n");
return -ENODEV;
}
@@ -14407,7 +14406,7 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
veb = i40e_veb_setup(pf, vsi->uplink_seid, vsi->seid,
vsi->tc_config.enabled_tc);
if (veb) {
- if (vsi->seid != pf->vsi[pf->lan_vsi]->seid) {
+ if (vsi->type != I40E_VSI_MAIN) {
dev_info(&vsi->back->pdev->dev,
"New VSI creation error, uplink seid of LAN VSI expected.\n");
return NULL;
In the driver code there are 3 types of checks whether given VSI is main or not: 1. vsi->type ==/!= I40E_VSI_MAIN 2. vsi ==/!= pf->vsi[pf->lan_vsi] 3. vsi->seid ==/!= pf->vsi[pf->lan_vsi]->seid All of them are equivalent and can be consolidated. Convert cases 2 and 3 to case 1. Signed-off-by: Ivan Vecera <ivecera@redhat.com> --- .../net/ethernet/intel/i40e/i40e_debugfs.c | 2 +- .../net/ethernet/intel/i40e/i40e_ethtool.c | 12 ++++++------ drivers/net/ethernet/intel/i40e/i40e_main.c | 19 +++++++++---------- 3 files changed, 16 insertions(+), 17 deletions(-)