diff mbox series

[v3,1/2] dt-bindings: net: add phy-supply property for stm32

Message ID 20240325094218.56934-2-christophe.roullier@foss.st.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Add properties in dwmac-stm32 documentation | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Christophe Roullier March 25, 2024, 9:42 a.m. UTC 
Phandle to a regulator that provides power to the PHY. This
regulator will be managed during the PHY power on/off sequence.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index fc8c96b08d7dc..80937b28fa046 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -82,6 +82,9 @@  properties:
       Should be phandle/offset pair. The phandle to the syscon node which
       encompases the glue register, and the offset of the control register
 
+  phy-supply:
+    description: PHY regulator
+
   st,eth-clk-sel:
     description:
       set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.