diff mbox series

[net-next,v4,2/2] ravb: Add support for an optional MDIO mode

Message ID 20240325153451.2366083-3-niklas.soderlund+renesas@ragnatech.se (mailing list archive)
State Accepted
Commit 2c60c4c008d4b05b9b65bf88f784556208029333
Delegated to: Netdev Maintainers
Headers show
Series ravb: Support describing the MDIO bus | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 944 this patch: 944
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/build_clang success Errors and warnings before: 955 this patch: 955
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 955 this patch: 955
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 21 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/contest success net-next-2024-03-27--06-00 (tests: 949)

Commit Message

Niklas Söderlund March 25, 2024, 3:34 p.m. UTC 
The driver used the DT node of the device itself when registering the
MDIO bus. While this works, it creates a problem: it forces any MDIO bus
properties to also be set on the devices DT node. This mixes the
properties of two distinctly different things and is confusing.

This change adds support for an optional mdio node to be defined as a
child to the device DT node. The child node can then be used to describe
MDIO bus properties that the MDIO core can act on when registering the
bus.

If no mdio child node is found the driver fallback to the old behavior
and register the MDIO bus using the device DT node. This change is
backward compatible with old bindings in use.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
* Changes since v3
- None

* Changes since v2
- Use DT node instead of OF ode in commit message.
- Update punctuation in commit message.
- Simplify the node selection in the driver.
---
 drivers/net/ethernet/renesas/ravb_main.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index d1be030c8848..9a397f9b4c0c 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2564,6 +2564,7 @@  static int ravb_mdio_init(struct ravb_private *priv)
 {
 	struct platform_device *pdev = priv->pdev;
 	struct device *dev = &pdev->dev;
+	struct device_node *mdio_node;
 	struct phy_device *phydev;
 	struct device_node *pn;
 	int error;
@@ -2583,7 +2584,13 @@  static int ravb_mdio_init(struct ravb_private *priv)
 		 pdev->name, pdev->id);
 
 	/* Register MDIO bus */
-	error = of_mdiobus_register(priv->mii_bus, dev->of_node);
+	mdio_node = of_get_child_by_name(dev->of_node, "mdio");
+	if (!mdio_node) {
+		/* backwards compatibility for DT lacking mdio subnode */
+		mdio_node = of_node_get(dev->of_node);
+	}
+	error = of_mdiobus_register(priv->mii_bus, mdio_node);
+	of_node_put(mdio_node);
 	if (error)
 		goto out_free_bus;