From patchwork Tue Apr 9 08:18:47 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 13621991 X-Patchwork-Delegate: kuba@kernel.org Received: from metis.whiteo.stw.pengutronix.de (metis.whiteo.stw.pengutronix.de [185.203.201.7]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7F6157E58C for ; Tue, 9 Apr 2024 08:19:00 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.203.201.7 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1712650744; cv=none; b=KLU49+PO3KZADrR6Xu9wQMZc1ZUwl5+dkx1RwAHfcQ++YLxJy68mJys6Z5cFXLMU78qSQbZC4mkaIV5XKyB4JPZcsKSnYJBb0MNw8H+o4OLfvdaxFrYKv5yw6L0Oo7H/Mn2aLWsDb0SOl6ZNlVoQCebL0IrgdjK1OVhxW7/SnYU= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1712650744; c=relaxed/simple; bh=69ibhCF2lqOMYZd29c//rKUqcEqGpphg3A0UzifWIs0=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=m3kj7YZipR06Aa0oQqsjyTqUcvVtPu8lyhVfTCPyTTSslkwAGyJr3glfpaL1Qd3vCsVCd0pXR0DM+IsDYo7YO6/uEM7Db/JeU/zinyP+LwxXcyxBsogi1utHwm5psKArJSelQssFL0EdW3oqYsBNgZ9dFhUpguBczxGhkRVyOUk= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=pengutronix.de; spf=pass smtp.mailfrom=pengutronix.de; arc=none smtp.client-ip=185.203.201.7 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=pengutronix.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=pengutronix.de Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1ru6gw-0006VL-Nj; Tue, 09 Apr 2024 10:18:54 +0200 Received: from [2a0a:edc0:0:1101:1d::ac] (helo=dude04.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1ru6gu-00BGpU-PC; Tue, 09 Apr 2024 10:18:52 +0200 Received: from ore by dude04.red.stw.pengutronix.de with local (Exim 4.96) (envelope-from ) id 1ru6gu-00EoVE-2D; Tue, 09 Apr 2024 10:18:52 +0200 From: Oleksij Rempel To: "David S. Miller" , Andrew Lunn , Eric Dumazet , Florian Fainelli , Jakub Kicinski , Paolo Abeni , Vladimir Oltean , Woojung Huh , Arun Ramadoss Cc: Oleksij Rempel , kernel@pengutronix.de, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, UNGLinuxDriver@microchip.com, David Ahern , Simon Horman , Willem de Bruijn , =?utf-8?q?S=C3=B8ren_Andersen?= Subject: [PATCH net-next v5 5/9] net: dsa: microchip: add support for different DCB app configurations Date: Tue, 9 Apr 2024 10:18:47 +0200 Message-Id: <20240409081851.3530641-6-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20240409081851.3530641-1-o.rempel@pengutronix.de> References: <20240409081851.3530641-1-o.rempel@pengutronix.de> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2a0a:edc0:0:c01:1d::a2 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.whiteo.stw.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org Add DCB support to configure app trust sources and default port priority. Following commands can be used for testing: dcb apptrust set dev lan1 order pcp dscp dcb app replace dev lan1 default-prio 3 Since it is not possible to configure DSCP-Prio mapping per port, this patch provide only ability to read switch global dscp-prio mapping and way to enable/disable app trust for DSCP. Signed-off-by: Oleksij Rempel Acked-by: Arun Ramadoss --- changes v5: - reorder port_set_apptrust and port_get_apptrust - s/defult/default - group all the get register function in top of file - s/invalid/err_sel_not_vaild - s/apptrus_/apptrust_ changes v3: - move ksz8_port2_supported_apptrust[] to a followup patch --- drivers/net/dsa/microchip/Kconfig | 2 + drivers/net/dsa/microchip/Makefile | 2 +- drivers/net/dsa/microchip/ksz_common.c | 12 +- drivers/net/dsa/microchip/ksz_common.h | 5 + drivers/net/dsa/microchip/ksz_dcb.c | 544 +++++++++++++++++++++++++ drivers/net/dsa/microchip/ksz_dcb.h | 21 + 6 files changed, 584 insertions(+), 2 deletions(-) create mode 100644 drivers/net/dsa/microchip/ksz_dcb.c create mode 100644 drivers/net/dsa/microchip/ksz_dcb.h diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig index 394ca8678d2ba..c1b906c05a025 100644 --- a/drivers/net/dsa/microchip/Kconfig +++ b/drivers/net/dsa/microchip/Kconfig @@ -4,6 +4,8 @@ menuconfig NET_DSA_MICROCHIP_KSZ_COMMON depends on NET_DSA select NET_DSA_TAG_KSZ select NET_DSA_TAG_NONE + select NET_IEEE8021Q_HELPERS + select DCB help This driver adds support for Microchip KSZ9477 series switch and KSZ8795/KSZ88x3 switch chips. diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile index 49459a50dbc81..1cfba1ec9355a 100644 --- a/drivers/net/dsa/microchip/Makefile +++ b/drivers/net/dsa/microchip/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_switch.o -ksz_switch-objs := ksz_common.o +ksz_switch-objs := ksz_common.o ksz_dcb.o ksz_switch-objs += ksz9477.o ksz9477_acl.o ksz9477_tc_flower.o ksz_switch-objs += ksz8795.o ksz_switch-objs += lan937x_main.o diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index b2d1c61400c51..78a9622adecde 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -28,6 +28,7 @@ #include #include "ksz_common.h" +#include "ksz_dcb.h" #include "ksz_ptp.h" #include "ksz8.h" #include "ksz9477.h" @@ -2364,6 +2365,10 @@ static int ksz_setup(struct dsa_switch *ds) goto out_ptp_clock_unregister; } + ret = ksz_dcb_init(dev); + if (ret) + goto out_ptp_clock_unregister; + /* start switch */ regmap_update_bits(ksz_regmap_8(dev), regs[S_START_CTRL], SW_START, SW_START); @@ -2691,7 +2696,7 @@ static int ksz_port_setup(struct dsa_switch *ds, int port) * there is no need to do anything. */ - return 0; + return ksz_dcb_init_port(dev, port); } void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) @@ -3943,6 +3948,11 @@ static const struct dsa_switch_ops ksz_switch_ops = { .port_setup_tc = ksz_setup_tc, .get_mac_eee = ksz_get_mac_eee, .set_mac_eee = ksz_set_mac_eee, + .port_get_default_prio = ksz_port_get_default_prio, + .port_set_default_prio = ksz_port_set_default_prio, + .port_get_dscp_prio = ksz_port_get_dscp_prio, + .port_get_apptrust = ksz_port_get_apptrust, + .port_set_apptrust = ksz_port_set_apptrust, }; struct ksz_device *ksz_switch_alloc(struct device *base, void *priv) diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index 900e9ac06d013..cbbaafca79379 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -621,6 +621,11 @@ static inline bool ksz_is_ksz88x3(struct ksz_device *dev) return dev->chip_id == KSZ8830_CHIP_ID; } +static inline bool is_ksz8(struct ksz_device *dev) +{ + return ksz_is_ksz87xx(dev) || ksz_is_ksz88x3(dev); +} + static inline int is_lan937x(struct ksz_device *dev) { return dev->chip_id == LAN9370_CHIP_ID || diff --git a/drivers/net/dsa/microchip/ksz_dcb.c b/drivers/net/dsa/microchip/ksz_dcb.c new file mode 100644 index 0000000000000..6f6caccc41731 --- /dev/null +++ b/drivers/net/dsa/microchip/ksz_dcb.c @@ -0,0 +1,544 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2024 Pengutronix, Oleksij Rempel + +#include +#include +#include +#include + +#include "ksz_common.h" +#include "ksz_dcb.h" +#include "ksz8.h" + +#define KSZ8_REG_PORT_1_CTRL_0 0x10 +#define KSZ8_PORT_DIFFSERV_ENABLE BIT(6) +#define KSZ8_PORT_802_1P_ENABLE BIT(5) +#define KSZ8_PORT_BASED_PRIO_M GENMASK(4, 3) + +#define KSZ88X3_REG_TOS_DSCP_CTRL 0x60 +#define KSZ8765_REG_TOS_DSCP_CTRL 0x90 + +#define KSZ9477_REG_SW_MAC_TOS_CTRL 0x033e +#define KSZ9477_SW_TOS_DSCP_REMAP BIT(0) +#define KSZ9477_SW_TOS_DSCP_DEFAULT_PRIO_M GENMASK(5, 3) + +#define KSZ9477_REG_DIFFSERV_PRIO_MAP 0x0340 + +#define KSZ9477_REG_PORT_MRI_PRIO_CTRL 0x0801 +#define KSZ9477_PORT_HIGHEST_PRIO BIT(7) +#define KSZ9477_PORT_OR_PRIO BIT(6) +#define KSZ9477_PORT_MAC_PRIO_ENABLE BIT(4) +#define KSZ9477_PORT_VLAN_PRIO_ENABLE BIT(3) +#define KSZ9477_PORT_802_1P_PRIO_ENABLE BIT(2) +#define KSZ9477_PORT_DIFFSERV_PRIO_ENABLE BIT(1) +#define KSZ9477_PORT_ACL_PRIO_ENABLE BIT(0) + +#define KSZ9477_REG_PORT_MRI_MAC_CTRL 0x0802 +#define KSZ9477_PORT_BASED_PRIO_M GENMASK(2, 0) + +struct ksz_apptrust_map { + u8 apptrust; + u8 bit; +}; + +static const struct ksz_apptrust_map ksz8_apptrust_map_to_bit[] = { + { DCB_APP_SEL_PCP, KSZ8_PORT_802_1P_ENABLE }, + { IEEE_8021QAZ_APP_SEL_DSCP, KSZ8_PORT_DIFFSERV_ENABLE }, +}; + +static const struct ksz_apptrust_map ksz9477_apptrust_map_to_bit[] = { + { DCB_APP_SEL_PCP, KSZ9477_PORT_802_1P_PRIO_ENABLE }, + { IEEE_8021QAZ_APP_SEL_DSCP, KSZ9477_PORT_DIFFSERV_PRIO_ENABLE }, +}; + +/* + * ksz_supported_apptrust[] - Supported apptrust selectors and Priority Order + * of Internal Priority Value (IPV) sources. + * + * This array defines the apptrust selectors supported by the hardware, where + * the index within the array indicates the priority of the selector - lower + * indices correspond to higher priority. This fixed priority scheme is due to + * the hardware's design, which does not support configurable priority among + * different priority sources. + * + * The priority sources, including Tail Tag, ACL, VLAN PCP and DSCP are ordered + * by the hardware's fixed logic, as detailed below. The order reflects a + * non-configurable precedence where certain types of priority information + * override others: + * + * 1. Tail Tag - Highest priority, overrides ACL, VLAN PCP, and DSCP priorities. + * 2. ACL - Overrides VLAN PCP and DSCP priorities. + * 3. VLAN PCP - Overrides DSCP priority. + * 4. DSCP - Lowest priority, does not override any other priority source. + * + * In this context, the array's lower index (higher priority) for + * 'DCB_APP_SEL_PCP' suggests its relative priority over + * 'IEEE_8021QAZ_APP_SEL_DSCP' within the system's fixed priority scheme. + * + * DCB_APP_SEL_PCP - Priority Code Point selector + * IEEE_8021QAZ_APP_SEL_DSCP - Differentiated Services Code Point selector + */ +static const u8 ksz_supported_apptrust[] = { + DCB_APP_SEL_PCP, + IEEE_8021QAZ_APP_SEL_DSCP, +}; + +static const char * const ksz_supported_apptrust_variants[] = { + "empty", "dscp", "pcp", "dscp pcp" +}; + +static void ksz_get_default_port_prio_reg(struct ksz_device *dev, int *reg, + u8 *mask, int *shift) +{ + if (is_ksz8(dev)) { + *reg = KSZ8_REG_PORT_1_CTRL_0; + *mask = KSZ8_PORT_BASED_PRIO_M; + *shift = __bf_shf(KSZ8_PORT_BASED_PRIO_M); + } else { + *reg = KSZ9477_REG_PORT_MRI_MAC_CTRL; + *mask = KSZ9477_PORT_BASED_PRIO_M; + *shift = __bf_shf(KSZ9477_PORT_BASED_PRIO_M); + } +} + +/** + * ksz_get_dscp_prio_reg - Retrieves the DSCP-to-priority-mapping register + * @dev: Pointer to the KSZ switch device structure + * @reg: Pointer to the register address to be set + * @per_reg: Pointer to the number of DSCP values per register + * @mask: Pointer to the mask to be set + * + * This function retrieves the DSCP to priority mapping register, the number of + * DSCP values per register, and the mask to be set. + */ +static void ksz_get_dscp_prio_reg(struct ksz_device *dev, int *reg, + int *per_reg, u8 *mask) +{ + if (ksz_is_ksz87xx(dev)) { + *reg = KSZ8765_REG_TOS_DSCP_CTRL; + *per_reg = 4; + *mask = GENMASK(1, 0); + } else if (ksz_is_ksz88x3(dev)) { + *reg = KSZ88X3_REG_TOS_DSCP_CTRL; + *per_reg = 4; + *mask = GENMASK(1, 0); + } else { + *reg = KSZ9477_REG_DIFFSERV_PRIO_MAP; + *per_reg = 2; + *mask = GENMASK(2, 0); + } +} + +/** + * ksz_get_apptrust_map_and_reg - Retrieves the apptrust map and register + * @dev: Pointer to the KSZ switch device structure + * @map: Pointer to the apptrust map to be set + * @reg: Pointer to the register address to be set + * @mask: Pointer to the mask to be set + * + * This function retrieves the apptrust map and register address for the + * apptrust configuration. + */ +static void ksz_get_apptrust_map_and_reg(struct ksz_device *dev, + const struct ksz_apptrust_map **map, + int *reg, u8 *mask) +{ + if (is_ksz8(dev)) { + *map = ksz8_apptrust_map_to_bit; + *reg = KSZ8_REG_PORT_1_CTRL_0; + *mask = KSZ8_PORT_DIFFSERV_ENABLE | KSZ8_PORT_802_1P_ENABLE; + } else { + *map = ksz9477_apptrust_map_to_bit; + *reg = KSZ9477_REG_PORT_MRI_PRIO_CTRL; + *mask = KSZ9477_PORT_802_1P_PRIO_ENABLE | + KSZ9477_PORT_DIFFSERV_PRIO_ENABLE; + } +} + +/** + * ksz_port_get_default_prio - Retrieves the default priority for a port on a + * KSZ switch + * @ds: Pointer to the DSA switch structure + * @port: Port number from which to get the default priority + * + * This function fetches the default priority for the specified port on a KSZ + * switch. + * + * Return: The default priority of the port on success, or a negative error + * code on failure. + */ +int ksz_port_get_default_prio(struct dsa_switch *ds, int port) +{ + struct ksz_device *dev = ds->priv; + int ret, reg, shift; + u8 data, mask; + + ksz_get_default_port_prio_reg(dev, ®, &mask, &shift); + + ret = ksz_pread8(dev, port, reg, &data); + if (ret) + return ret; + + return (data & mask) >> shift; +} + +/** + * ksz_port_set_default_prio - Sets the default priority for a port on a KSZ + * switch + * @ds: Pointer to the DSA switch structure + * @port: Port number for which to set the default priority + * @prio: Priority value to set + * + * This function sets the default priority for the specified port on a KSZ + * switch. + * + * Return: 0 on success, or a negative error code on failure. + */ +int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio) +{ + struct ksz_device *dev = ds->priv; + int reg, shift; + u8 mask; + + if (prio >= dev->info->num_tx_queues) + return -EINVAL; + + ksz_get_default_port_prio_reg(dev, ®, &mask, &shift); + + return ksz_prmw8(dev, port, reg, mask, (prio << shift) & mask); +} + +/** + * ksz_port_get_dscp_prio - Retrieves the priority for a DSCP value on a KSZ + * switch + * @ds: Pointer to the DSA switch structure + * @port: Port number for which to get the priority + * @dscp: DSCP value for which to get the priority + * + * This function fetches the priority value from switch global DSCP-to-priorty + * mapping table for the specified DSCP value. + * + * Return: The priority value for the DSCP on success, or a negative error + * code on failure. + */ +int ksz_port_get_dscp_prio(struct dsa_switch *ds, int port, u8 dscp) +{ + struct ksz_device *dev = ds->priv; + int reg, per_reg, ret, shift; + u8 data, mask; + + ksz_get_dscp_prio_reg(dev, ®, &per_reg, &mask); + + /* If DSCP remapping is disabled, DSCP bits 3-5 are used as Internal + * Priority Value (IPV) + */ + if (!is_ksz8(dev)) { + ret = ksz_read8(dev, KSZ9477_REG_SW_MAC_TOS_CTRL, &data); + if (ret) + return ret; + + /* If DSCP remapping is disabled, DSCP bits 3-5 are used as + * Internal Priority Value (IPV) + */ + if (!(data & KSZ9477_SW_TOS_DSCP_REMAP)) + return FIELD_GET(KSZ9477_SW_TOS_DSCP_DEFAULT_PRIO_M, + dscp); + } + + /* In case DSCP remapping is enabled, we need to write the DSCP to + * priority mapping table. + */ + reg += dscp / per_reg; + ret = ksz_read8(dev, reg, &data); + if (ret) + return ret; + + shift = (dscp % per_reg) * (8 / per_reg); + + return (data >> shift) & mask; +} + +/** + * ksz_init_global_dscp_map - Initializes the global DSCP-to-priority mapping + * @dev: Pointer to the KSZ switch device structure + * + * This function initializes the global DSCP-to-priority mapping table for the + * switch. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz_init_global_dscp_map(struct ksz_device *dev) +{ + int reg, per_reg, ret, dscp; + u8 data = 0; + u8 mask; + + /* On KSZ9xxx variants, DSCP remapping is disabled by default. + * Enable to have, predictable and reproducible behavior across + * different devices. + */ + if (!is_ksz8(dev)) { + ret = ksz_rmw8(dev, KSZ9477_REG_SW_MAC_TOS_CTRL, + KSZ9477_SW_TOS_DSCP_REMAP, + KSZ9477_SW_TOS_DSCP_REMAP); + if (ret) + return ret; + } + + ksz_get_dscp_prio_reg(dev, ®, &per_reg, &mask); + + for (dscp = 0; dscp < DSCP_MAX; dscp++) { + int ipv, shift, tt; + + /* Map DSCP to Traffic Type, which is corresponding to the + * Internal Priority Value (IPV) in the switch. + */ + if (!is_ksz8(dev)) { + ipv = ietf_dscp_to_ieee8021q_tt(dscp); + } else { + /* On KSZ8xxx variants we do not have IPV to queue + * remapping table. We need to convert DSCP to Traffic + * Type and then to queue. + */ + tt = ietf_dscp_to_ieee8021q_tt(dscp); + if (tt < 0) + return tt; + + ipv = ieee8021q_tt_to_tc(tt, dev->info->num_tx_queues); + } + + if (ipv < 0) + return ipv; + + shift = (dscp % per_reg) * (8 / per_reg); + data |= (ipv & mask) << shift; + + if (dscp % per_reg == per_reg - 1) { + ret = ksz_write8(dev, reg + (dscp / per_reg), data); + if (ret) + return ret; + + data = 0; + } + } + + return 0; +} + +/** + * ksz_apptrust_error - Prints an error message for an invalid apptrust selector + * @dev: Pointer to the KSZ switch device structure + * + * This function prints an error message when an invalid apptrust selector is + * provided. + */ +static void ksz_apptrust_error(struct ksz_device *dev) +{ + char supported_apptrust_variants[64]; + int i; + + supported_apptrust_variants[0] = '\0'; + for (i = 0; i < ARRAY_SIZE(ksz_supported_apptrust_variants); i++) { + if (i > 0) + strlcat(supported_apptrust_variants, ", ", + sizeof(supported_apptrust_variants)); + strlcat(supported_apptrust_variants, + ksz_supported_apptrust_variants[i], + sizeof(supported_apptrust_variants)); + } + + dev_err(dev->dev, "Invalid apptrust selector or priority order. Supported: %s\n", + supported_apptrust_variants); +} + +/** + * ksz_port_set_apptrust_validate - Validates the apptrust selectors + * @dev: Pointer to the KSZ switch device structure + * @port: Port number for which to set the apptrust selectors + * @sel: Array of apptrust selectors to validate + * @nsel: Number of apptrust selectors in the array + * + * This function validates the apptrust selectors provided and ensures that + * they are in the correct order. + * + * This family of switches supports two apptrust selectors: DCB_APP_SEL_PCP and + * IEEE_8021QAZ_APP_SEL_DSCP. The priority order of the selectors is fixed and + * cannot be changed. The order is as follows: + * 1. DCB_APP_SEL_PCP - Priority Code Point selector (highest priority) + * 2. IEEE_8021QAZ_APP_SEL_DSCP - Differentiated Services Code Point selector + * (lowest priority) + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz_port_set_apptrust_validate(struct ksz_device *dev, int port, + const u8 *sel, int nsel) +{ + int i, j, found; + int j_prev = 0; + + /* Iterate through the requested selectors */ + for (i = 0; i < nsel; i++) { + found = 0; + + /* Check if the current selector is supported by the hardware */ + for (j = 0; j < sizeof(ksz_supported_apptrust); j++) { + if (sel[i] != ksz_supported_apptrust[j]) + continue; + + found = 1; + + /* Ensure that no higher priority selector (lower index) + * precedes a lower priority one + */ + if (i > 0 && j <= j_prev) + goto err_sel_not_vaild; + + j_prev = j; + break; + } + + if (!found) + goto err_sel_not_vaild; + } + + return 0; + +err_sel_not_vaild: + ksz_apptrust_error(dev); + + return -EINVAL; +} + +/** + * ksz_port_set_apptrust - Sets the apptrust selectors for a port on a KSZ + * switch + * @ds: Pointer to the DSA switch structure + * @port: Port number for which to set the apptrust selectors + * @sel: Array of apptrust selectors to set + * @nsel: Number of apptrust selectors in the array + * + * This function sets the apptrust selectors for the specified port on a KSZ + * switch. + * + * Return: 0 on success, or a negative error code on failure + */ +int ksz_port_set_apptrust(struct dsa_switch *ds, int port, + const u8 *sel, int nsel) +{ + const struct ksz_apptrust_map *map; + struct ksz_device *dev = ds->priv; + int reg, i, ret; + u8 data = 0; + u8 mask; + + ret = ksz_port_set_apptrust_validate(dev, port, sel, nsel); + if (ret) + return ret; + + ksz_get_apptrust_map_and_reg(dev, &map, ®, &mask); + + for (i = 0; i < nsel; i++) { + int j; + + for (j = 0; j < ARRAY_SIZE(ksz_supported_apptrust); j++) { + if (sel[i] != ksz_supported_apptrust[j]) + continue; + + data |= map[j].bit; + break; + } + } + + return ksz_prmw8(dev, port, reg, mask, data); +} + +/** + * ksz_port_get_apptrust - Retrieves the apptrust selectors for a port on a KSZ + * switch + * @ds: Pointer to the DSA switch structure + * @port: Port number for which to get the apptrust selectors + * @sel: Array to store the apptrust selectors + * @nsel: Number of apptrust selectors in the array + * + * This function fetches the apptrust selectors for the specified port on a KSZ + * switch. + * + * Return: 0 on success, or a negative error code on failure + */ +int ksz_port_get_apptrust(struct dsa_switch *ds, int port, u8 *sel, int *nsel) +{ + const struct ksz_apptrust_map *map; + struct ksz_device *dev = ds->priv; + int reg, i, ret; + u8 data; + u8 mask; + + ksz_get_apptrust_map_and_reg(dev, &map, ®, &mask); + + ret = ksz_pread8(dev, port, reg, &data); + if (ret) + return ret; + + *nsel = 0; + for (i = 0; i < ARRAY_SIZE(ksz_supported_apptrust); i++) { + if (data & map[i].bit) + sel[(*nsel)++] = ksz_supported_apptrust[i]; + } + + return 0; +} + +/** + * ksz_dcb_init_port - Initializes the DCB configuration for a port on a KSZ + * @dev: Pointer to the KSZ switch device structure + * @port: Port number for which to initialize the DCB configuration + * + * This function initializes the DCB configuration for the specified port on a + * KSZ switch. Particular DCB configuration is set for the port, including the + * default priority and apptrust selectors. + * The default priority is set to Best Effort, and the apptrust selectors are + * set to all supported selectors. + * + * Return: 0 on success, or a negative error code on failure + */ +int ksz_dcb_init_port(struct ksz_device *dev, int port) +{ + int ret, ipv; + + if (is_ksz8(dev)) { + ipv = ieee8021q_tt_to_tc(IEEE8021Q_TT_BE, + dev->info->num_tx_queues); + if (ipv < 0) + return ipv; + } else { + ipv = IEEE8021Q_TT_BE; + } + + /* Set the default priority for the port to Best Effort */ + ret = ksz_port_set_default_prio(dev->ds, port, ipv); + if (ret) + return ret; + + return ksz_port_set_apptrust(dev->ds, port, ksz_supported_apptrust, + ARRAY_SIZE(ksz_supported_apptrust)); +} + +/** + * ksz_dcb_init - Initializes the DCB configuration for a KSZ switch + * @dev: Pointer to the KSZ switch device structure + * + * This function initializes the DCB configuration for a KSZ switch. The global + * DSCP-to-priority mapping table is initialized. + * + * Return: 0 on success, or a negative error code on failure + */ +int ksz_dcb_init(struct ksz_device *dev) +{ + int ret; + + ret = ksz_init_global_dscp_map(dev); + if (ret) + return ret; + + return 0; +} diff --git a/drivers/net/dsa/microchip/ksz_dcb.h b/drivers/net/dsa/microchip/ksz_dcb.h new file mode 100644 index 0000000000000..254c0e7bdafca --- /dev/null +++ b/drivers/net/dsa/microchip/ksz_dcb.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2024 Pengutronix, Oleksij Rempel */ + +#ifndef __KSZ_DCB_H +#define __KSZ_DCB_H + +#include + +#include "ksz_common.h" + +int ksz_port_get_default_prio(struct dsa_switch *ds, int port); +int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio); +int ksz_port_get_dscp_prio(struct dsa_switch *ds, int port, u8 dscp); +int ksz_port_set_apptrust(struct dsa_switch *ds, int port, + const unsigned char *sel, + int nsel); +int ksz_port_get_apptrust(struct dsa_switch *ds, int port, u8 *sel, int *nsel); +int ksz_dcb_init_port(struct ksz_device *dev, int port); +int ksz_dcb_init(struct ksz_device *dev); + +#endif /* __KSZ_DCB_H */