@@ -14,35 +14,32 @@
# check the icmp errors are propagated to the correct host as per
# nat of "established" icmp-echo "connection".
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
+source lib.sh
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
+if ! nft --version > /dev/null 2>&1;then
echo "SKIP: Could not run test without nft tool"
exit $ksft_skip
fi
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
- echo "SKIP: Could not run test without ip tool"
- exit $ksft_skip
-fi
-
cleanup() {
- for i in 1 2;do ip netns del nsclient$i;done
- for i in 1 2;do ip netns del nsrouter$i;done
+ cleanup_all_ns
}
trap cleanup EXIT
-ipv4() {
- echo -n 192.168.$1.2
-}
+setup_ns nsclient1 nsclient2 nsrouter1 nsrouter2
+
+ret=0
+
+add_addr()
+{
+ ns=$1
+ dev=$2
+ i=$3
-ipv6 () {
- echo -n dead:$1::2
+ ip -net "$ns" link set "$dev" up
+ ip -net "$ns" addr add "192.168.$i.2/24" dev "$dev"
+ ip -net "$ns" addr add "dead:$i::2/64" dev "$dev" nodad
}
check_counter()
@@ -52,10 +49,9 @@ check_counter()
expect=$3
local lret=0
- cnt=$(ip netns exec $ns nft list counter inet filter "$name" | grep -q "$expect")
- if [ $? -ne 0 ]; then
+ if ! ip netns exec "$ns" nft list counter inet filter "$name" | grep -q "$expect"; then
echo "ERROR: counter $name in $ns has unexpected value (expected $expect)" 1>&2
- ip netns exec $ns nft list counter inet filter "$name" 1>&2
+ ip netns exec "$ns" nft list counter inet filter "$name" 1>&2
lret=1
fi
@@ -65,9 +61,8 @@ check_counter()
check_unknown()
{
expect="packets 0 bytes 0"
- for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
- check_counter $n "unknown" "$expect"
- if [ $? -ne 0 ] ;then
+ for n in ${nsclient1} ${nsclient2} ${nsrouter1} ${nsrouter2}; do
+ if ! check_counter "$n" "unknown" "$expect"; then
return 1
fi
done
@@ -75,61 +70,48 @@ check_unknown()
return 0
}
-for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
- ip netns add $n
- ip -net $n link set lo up
-done
-
-DEV=veth0
-ip link add $DEV netns nsclient1 type veth peer name eth1 netns nsrouter1
DEV=veth0
-ip link add $DEV netns nsclient2 type veth peer name eth1 netns nsrouter2
+ip link add "$DEV" netns "$nsclient1" type veth peer name eth1 netns "$nsrouter1"
+ip link add "$DEV" netns "$nsclient2" type veth peer name eth1 netns "$nsrouter2"
+ip link add "$DEV" netns "$nsrouter1" type veth peer name eth2 netns "$nsrouter2"
-DEV=veth0
-ip link add $DEV netns nsrouter1 type veth peer name eth2 netns nsrouter2
+add_addr "$nsclient1" $DEV 1
+add_addr "$nsclient2" $DEV 2
-DEV=veth0
-for i in 1 2; do
- ip -net nsclient$i link set $DEV up
- ip -net nsclient$i addr add $(ipv4 $i)/24 dev $DEV
- ip -net nsclient$i addr add $(ipv6 $i)/64 dev $DEV
-done
-
-ip -net nsrouter1 link set eth1 up
-ip -net nsrouter1 link set veth0 up
+ip -net "$nsrouter1" link set eth1 up
+ip -net "$nsrouter1" link set $DEV up
-ip -net nsrouter2 link set eth1 up
-ip -net nsrouter2 link set eth2 up
+ip -net "$nsrouter2" link set eth1 mtu 1280 up
+ip -net "$nsrouter2" link set eth2 up
-ip -net nsclient1 route add default via 192.168.1.1
-ip -net nsclient1 -6 route add default via dead:1::1
+ip -net "$nsclient1" route add default via 192.168.1.1
+ip -net "$nsclient1" -6 route add default via dead:1::1
-ip -net nsclient2 route add default via 192.168.2.1
-ip -net nsclient2 route add default via dead:2::1
+ip -net "$nsclient2" route add default via 192.168.2.1
+ip -net "$nsclient2" route add default via dead:2::1
+ip -net "$nsclient2" link set veth0 mtu 1280
-i=3
-ip -net nsrouter1 addr add 192.168.1.1/24 dev eth1
-ip -net nsrouter1 addr add 192.168.3.1/24 dev veth0
-ip -net nsrouter1 addr add dead:1::1/64 dev eth1
-ip -net nsrouter1 addr add dead:3::1/64 dev veth0
-ip -net nsrouter1 route add default via 192.168.3.10
-ip -net nsrouter1 -6 route add default via dead:3::10
+ip -net "$nsrouter1" addr add 192.168.1.1/24 dev eth1
+ip -net "$nsrouter1" addr add 192.168.3.1/24 dev veth0
+ip -net "$nsrouter1" addr add dead:1::1/64 dev eth1 nodad
+ip -net "$nsrouter1" addr add dead:3::1/64 dev veth0 nodad
+ip -net "$nsrouter1" route add default via 192.168.3.10
+ip -net "$nsrouter1" -6 route add default via dead:3::10
-ip -net nsrouter2 addr add 192.168.2.1/24 dev eth1
-ip -net nsrouter2 addr add 192.168.3.10/24 dev eth2
-ip -net nsrouter2 addr add dead:2::1/64 dev eth1
-ip -net nsrouter2 addr add dead:3::10/64 dev eth2
-ip -net nsrouter2 route add default via 192.168.3.1
-ip -net nsrouter2 route add default via dead:3::1
+ip -net "$nsrouter2" addr add 192.168.2.1/24 dev eth1
+ip -net "$nsrouter2" addr add 192.168.3.10/24 dev eth2
+ip -net "$nsrouter2" addr add dead:2::1/64 dev eth1 nodad
+ip -net "$nsrouter2" addr add dead:3::10/64 dev eth2 nodad
+ip -net "$nsrouter2" route add default via 192.168.3.1
+ip -net "$nsrouter2" route add default via dead:3::1
-sleep 2
for i in 4 6; do
- ip netns exec nsrouter1 sysctl -q net.ipv$i.conf.all.forwarding=1
- ip netns exec nsrouter2 sysctl -q net.ipv$i.conf.all.forwarding=1
+ ip netns exec "$nsrouter1" sysctl -q net.ipv$i.conf.all.forwarding=1
+ ip netns exec "$nsrouter2" sysctl -q net.ipv$i.conf.all.forwarding=1
done
-for netns in nsrouter1 nsrouter2; do
-ip netns exec $netns nft -f - <<EOF
+for netns in "$nsrouter1" "$nsrouter2"; do
+ip netns exec "$netns" nft -f - <<EOF
table inet filter {
counter unknown { }
counter related { }
@@ -144,7 +126,7 @@ table inet filter {
EOF
done
-ip netns exec nsclient1 nft -f - <<EOF
+ip netns exec "$nsclient1" nft -f - <<EOF
table inet filter {
counter unknown { }
counter related { }
@@ -164,7 +146,7 @@ table inet filter {
}
EOF
-ip netns exec nsclient2 nft -f - <<EOF
+ip netns exec "$nsclient2" nft -f - <<EOF
table inet filter {
counter unknown { }
counter new { }
@@ -189,11 +171,10 @@ table inet filter {
}
EOF
-
# make sure NAT core rewrites adress of icmp error if nat is used according to
# conntrack nat information (icmp error will be directed at nsrouter1 address,
# but it needs to be routed to nsclient1 address).
-ip netns exec nsrouter1 nft -f - <<EOF
+ip netns exec "$nsrouter1" nft -f - <<EOF
table ip nat {
chain postrouting {
type nat hook postrouting priority 0; policy accept;
@@ -208,44 +189,32 @@ table ip6 nat {
}
EOF
-ip netns exec nsrouter2 ip link set eth1 mtu 1280
-ip netns exec nsclient2 ip link set veth0 mtu 1280
-sleep 1
-
-ip netns exec nsclient1 ping -c 1 -s 1000 -q -M do 192.168.2.2 >/dev/null
-if [ $? -ne 0 ]; then
+if ! ip netns exec "$nsclient1" ping -c 1 -s 1000 -q -M "do" 192.168.2.2 >/dev/null; then
echo "ERROR: netns ip routing/connectivity broken" 1>&2
- cleanup
exit 1
fi
-ip netns exec nsclient1 ping6 -q -c 1 -s 1000 dead:2::2 >/dev/null
-if [ $? -ne 0 ]; then
+if ! ip netns exec "$nsclient1" ping -c 1 -s 1000 -q dead:2::2 >/dev/null; then
echo "ERROR: netns ipv6 routing/connectivity broken" 1>&2
- cleanup
exit 1
fi
-check_unknown
-if [ $? -ne 0 ]; then
+if ! check_unknown; then
ret=1
fi
expect="packets 0 bytes 0"
-for netns in nsrouter1 nsrouter2 nsclient1;do
- check_counter "$netns" "related" "$expect"
- if [ $? -ne 0 ]; then
+for netns in "$nsrouter1" "$nsrouter2" "$nsclient1";do
+ if ! check_counter "$netns" "related" "$expect"; then
ret=1
fi
done
expect="packets 2 bytes 2076"
-check_counter nsclient2 "new" "$expect"
-if [ $? -ne 0 ]; then
+if ! check_counter "$nsclient2" "new" "$expect"; then
ret=1
fi
-ip netns exec nsclient1 ping -q -c 1 -s 1300 -M do 192.168.2.2 > /dev/null
-if [ $? -eq 0 ]; then
+if ip netns exec "$nsclient1" ping -W 0.5 -q -c 1 -s 1300 -M "do" 192.168.2.2 > /dev/null; then
echo "ERROR: ping should have failed with PMTU too big error" 1>&2
ret=1
fi
@@ -253,30 +222,26 @@ fi
# nsrouter2 should have generated the icmp error, so
# related counter should be 0 (its in forward).
expect="packets 0 bytes 0"
-check_counter "nsrouter2" "related" "$expect"
-if [ $? -ne 0 ]; then
+if ! check_counter "$nsrouter2" "related" "$expect"; then
ret=1
fi
# but nsrouter1 should have seen it, same for nsclient1.
expect="packets 1 bytes 576"
-for netns in nsrouter1 nsclient1;do
- check_counter "$netns" "related" "$expect"
- if [ $? -ne 0 ]; then
+for netns in ${nsrouter1} ${nsclient1};do
+ if ! check_counter "$netns" "related" "$expect"; then
ret=1
fi
done
-ip netns exec nsclient1 ping6 -c 1 -s 1300 dead:2::2 > /dev/null
-if [ $? -eq 0 ]; then
+if ip netns exec "${nsclient1}" ping6 -W 0.5 -c 1 -s 1300 dead:2::2 > /dev/null; then
echo "ERROR: ping6 should have failed with PMTU too big error" 1>&2
ret=1
fi
expect="packets 2 bytes 1856"
-for netns in nsrouter1 nsclient1;do
- check_counter "$netns" "related" "$expect"
- if [ $? -ne 0 ]; then
+for netns in "${nsrouter1}" "${nsclient1}";do
+ if ! check_counter "$netns" "related" "$expect"; then
ret=1
fi
done
@@ -288,21 +253,19 @@ else
fi
# add 'bad' route, expect icmp REDIRECT to be generated
-ip netns exec nsclient1 ip route add 192.168.1.42 via 192.168.1.1
-ip netns exec nsclient1 ip route add dead:1::42 via dead:1::1
+ip netns exec "${nsclient1}" ip route add 192.168.1.42 via 192.168.1.1
+ip netns exec "${nsclient1}" ip route add dead:1::42 via dead:1::1
-ip netns exec "nsclient1" ping -q -c 2 192.168.1.42 > /dev/null
+ip netns exec "$nsclient1" ping -W 1 -q -i 0.5 -c 2 192.168.1.42 > /dev/null
expect="packets 1 bytes 112"
-check_counter nsclient1 "redir4" "$expect"
-if [ $? -ne 0 ];then
+if ! check_counter "$nsclient1" "redir4" "$expect"; then
ret=1
fi
-ip netns exec "nsclient1" ping -c 1 dead:1::42 > /dev/null
+ip netns exec "$nsclient1" ping -W 1 -c 1 dead:1::42 > /dev/null
expect="packets 1 bytes 192"
-check_counter nsclient1 "redir6" "$expect"
-if [ $? -ne 0 ];then
+if ! check_counter "$nsclient1" "redir6" "$expect"; then
ret=1
fi
Only relevant change is that netns names have random suffix names, i.e. its safe to run this in parallel with other tests. Signed-off-by: Florian Westphal <fw@strlen.de> --- .../net/netfilter/conntrack_icmp_related.sh | 179 +++++++----------- 1 file changed, 71 insertions(+), 108 deletions(-)