@@ -1105,19 +1105,19 @@ pcie@1f0000000 { /* Integrated Endpoint Root Complex */
<0000 0 0 2 &gic 0 0 GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
enetc_port0: ethernet@0,0 {
- compatible = "fsl,enetc";
+ compatible = "pci1957,e100", "fsl,enetc";
reg = <0x000000 0 0 0 0>;
status = "disabled";
};
enetc_port1: ethernet@0,1 {
- compatible = "fsl,enetc";
+ compatible = "pci1957,e100", "fsl,enetc";
reg = <0x000100 0 0 0 0>;
status = "disabled";
};
enetc_port2: ethernet@0,2 {
- compatible = "fsl,enetc";
+ compatible = "pci1957,e100", "fsl,enetc";
reg = <0x000200 0 0 0 0>;
phy-mode = "internal";
status = "disabled";
@@ -1130,14 +1130,14 @@ fixed-link {
};
enetc_mdio_pf3: mdio@0,3 {
- compatible = "fsl,enetc-mdio";
+ compatible = "pci1957,ee01", "fsl,enetc-mdio";
reg = <0x000300 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
};
ethernet@0,4 {
- compatible = "fsl,enetc-ptp";
+ compatible = "pci1957,ee02", "fsl,enetc-ptp";
reg = <0x000400 0 0 0 0>;
clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
little-endian;
@@ -1205,7 +1205,7 @@ fixed-link {
};
enetc_port3: ethernet@0,6 {
- compatible = "fsl,enetc";
+ compatible = "pci1957,e100", "fsl,enetc";
reg = <0x000600 0 0 0 0>;
phy-mode = "internal";
status = "disabled";
PCI devices should have a compatible string based on the vendor and device IDs. Add these to the Freescale ENETC devices. Putting the PCI compatible string first as vendor and device ID is more specific than a compatible without any device specific information. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)