From patchwork Wed Apr 24 13:30:15 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Karol Kolacinski X-Patchwork-Id: 13641880 X-Patchwork-Delegate: kuba@kernel.org Received: from mgamail.intel.com (mgamail.intel.com [192.198.163.8]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 0548C15EFAA for ; Wed, 24 Apr 2024 13:37:53 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=192.198.163.8 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1713965878; cv=none; b=bcMD0wHB1HZHb96WwQhlXoKqUVkaOM1M6gclIl460l7N/6jbgCxEp4utZMzUk9zCZ7e8y2+5y8DavFqUkbPd1yBAu+pDJKkeY8epVJkKPWJ8aqAw3BZKc2S6qL0evnhIGXW/w3j1XskqBSRxmcZUIkgifwM5+hyVRmWirPyRo8w= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1713965878; c=relaxed/simple; bh=zSjViN0DL2ZsX6IY027LH3ZB1rrzn5xT/+tVpJUnuQU=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=fmiCN/11P4uBUQRDJIsyI945WOZ7SJSjgMMd4LpBgEcFp0gKf2KcHfmU1cMB1f7sffA5AYMhLZycec9DcziElZFqFeuSDu3y9VhJ56QGNIQ1YPI/s5n8fuPiLg6QsSIlZVjP4oJqJNdNA3eDy1qna8DkzNBQW6AmPkguQgcWwn8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=intel.com; spf=pass smtp.mailfrom=intel.com; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b=LwSqAHAL; arc=none smtp.client-ip=192.198.163.8 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=intel.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=intel.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b="LwSqAHAL" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1713965874; x=1745501874; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=zSjViN0DL2ZsX6IY027LH3ZB1rrzn5xT/+tVpJUnuQU=; b=LwSqAHALPHptCCFqopkhLitxOxjFVyIsP6RUHgd9CP9bns4oitIpLY6l BlhIaUWi5hnjfAJzY0I1kx+nF7cQdOXy/314lF1f4PXvkKbWg5T4SoHuJ KVIMPN0HB9xIs66H+mfqbrWiwvblux9mOm3Sf9oa86zczbg+xZLfVBhnm LI6lBBfS7y/2EACiVhBRgeOkpo45gz8HdZTak8bktoKNrIMVCc0Q2JRDQ qFi7d91VifGUTSx+JtrNJbxmhJo0sQZlB2g03u9cNjKYjlQ5376unxw1U lBXLe39c9ekktn2gfoWh/+6k/yoBHRITZ03gi1Q1YFOLW2CGzLBwYvsp4 g==; X-CSE-ConnectionGUID: oSJAkb/JQnusuvYEYI9WCQ== X-CSE-MsgGUID: qc33DNcmS0+d3CjBPkaBQA== X-IronPort-AV: E=McAfee;i="6600,9927,11054"; a="27110485" X-IronPort-AV: E=Sophos;i="6.07,226,1708416000"; d="scan'208";a="27110485" Received: from orviesa010.jf.intel.com ([10.64.159.150]) by fmvoesa102.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 24 Apr 2024 06:37:53 -0700 X-CSE-ConnectionGUID: MdVyBi20SGqGTcYGdDAa7A== X-CSE-MsgGUID: DQ5hAoSTR8yFx57dy593Vw== X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="6.07,226,1708416000"; d="scan'208";a="24601151" Received: from kkolacin-desk1.igk.intel.com ([10.102.102.152]) by orviesa010.jf.intel.com with ESMTP; 24 Apr 2024 06:37:49 -0700 From: Karol Kolacinski To: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org, anthony.l.nguyen@intel.com, jesse.brandeburg@intel.com, Sergey Temerkhanov , Jacob Keller , Michal Michalik , Przemek Kitszel , Arkadiusz Kubalewski , Karol Kolacinski Subject: [PATCH v10 iwl-next 07/12] ice: Introduce ETH56G PHY model for E825C products Date: Wed, 24 Apr 2024 15:30:15 +0200 Message-ID: <20240424133542.113933-22-karol.kolacinski@intel.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240424133542.113933-16-karol.kolacinski@intel.com> References: <20240424133542.113933-16-karol.kolacinski@intel.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Patchwork-Delegate: kuba@kernel.org From: Sergey Temerkhanov E825C products feature a new PHY model - ETH56G. Introduces all necessary PHY definitions, functions etc. for ETH56G PHY, analogous to E82X and E810 ones with addition of a few HW-specific functionalities for ETH56G like one-step timestamping. It ensures correct PTP initialization and operation for E825C products. Co-developed-by: Jacob Keller Signed-off-by: Jacob Keller Co-developed-by: Michal Michalik Signed-off-by: Michal Michalik Signed-off-by: Sergey Temerkhanov Reviewed-by: Przemek Kitszel Reviewed-by: Arkadiusz Kubalewski Co-developed-by: Karol Kolacinski Signed-off-by: Karol Kolacinski Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) --- V7 -> V8: brought back P_REG_40B_HIGH_S due to 32 bit compatibility issue V4 -> V5: - removed inline in function types - removed unnecessary ifdefs - adjusted multiple returns of local vars at the end of function V1 -> V4: Adjusted bitslip calculations drivers/net/ethernet/intel/ice/ice_common.c | 10 +- drivers/net/ethernet/intel/ice/ice_common.h | 1 + drivers/net/ethernet/intel/ice/ice_ptp.c | 101 +- drivers/net/ethernet/intel/ice/ice_ptp.h | 1 + .../net/ethernet/intel/ice/ice_ptp_consts.h | 315 +++ drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 2069 ++++++++++++++++- drivers/net/ethernet/intel/ice/ice_ptp_hw.h | 240 +- drivers/net/ethernet/intel/ice/ice_sbq_cmd.h | 10 +- drivers/net/ethernet/intel/ice/ice_type.h | 20 +- 9 files changed, 2613 insertions(+), 154 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c index b78c4c9848b9..c5473d05698e 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.c +++ b/drivers/net/ethernet/intel/ice/ice_common.c @@ -3062,11 +3062,13 @@ bool ice_is_100m_speed_supported(struct ice_hw *hw) * Note: In the structure of [phy_type_low, phy_type_high], there should * be one bit set, as this function will convert one PHY type to its * speed. - * If no bit gets set, ICE_AQ_LINK_SPEED_UNKNOWN will be returned - * If more than one bit gets set, ICE_AQ_LINK_SPEED_UNKNOWN will be returned + * + * Return: + * * PHY speed for recognized PHY type + * * If no bit gets set, ICE_AQ_LINK_SPEED_UNKNOWN will be returned + * * If more than one bit gets set, ICE_AQ_LINK_SPEED_UNKNOWN will be returned */ -static u16 -ice_get_link_speed_based_on_phy_type(u64 phy_type_low, u64 phy_type_high) +u16 ice_get_link_speed_based_on_phy_type(u64 phy_type_low, u64 phy_type_high) { u16 speed_phy_type_high = ICE_AQ_LINK_SPEED_UNKNOWN; u16 speed_phy_type_low = ICE_AQ_LINK_SPEED_UNKNOWN; diff --git a/drivers/net/ethernet/intel/ice/ice_common.h b/drivers/net/ethernet/intel/ice/ice_common.h index 70f57340eb0d..86cc1df469dd 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.h +++ b/drivers/net/ethernet/intel/ice/ice_common.h @@ -262,6 +262,7 @@ int ice_aq_get_gpio(struct ice_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx, bool *value, struct ice_sq_cd *cd); bool ice_is_100m_speed_supported(struct ice_hw *hw); +u16 ice_get_link_speed_based_on_phy_type(u64 phy_type_low, u64 phy_type_high); int ice_aq_set_lldp_mib(struct ice_hw *hw, u8 mib_type, void *buf, u16 buf_size, struct ice_sq_cd *cd); diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c index 923011c9609a..3af0f4a2c3be 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp.c @@ -1011,6 +1011,28 @@ ice_ptp_release_tx_tracker(struct ice_pf *pf, struct ice_ptp_tx *tx) tx->len = 0; } +/** + * ice_ptp_init_tx_eth56g - Initialize tracking for Tx timestamps + * @pf: Board private structure + * @tx: the Tx tracking structure to initialize + * @port: the port this structure tracks + * + * Initialize the Tx timestamp tracker for this port. ETH56G PHYs + * have independent memory blocks for all ports. + * + * Return: 0 for success, -ENOMEM when failed to allocate Tx tracker + */ +static int ice_ptp_init_tx_eth56g(struct ice_pf *pf, struct ice_ptp_tx *tx, + u8 port) +{ + tx->block = port; + tx->offset = 0; + tx->len = INDEX_PER_PORT_ETH56G; + tx->has_ready_bitmap = 1; + + return ice_ptp_alloc_tx_tracker(tx); +} + /** * ice_ptp_init_tx_e82x - Initialize tracking for Tx timestamps * @pf: Board private structure @@ -1341,10 +1363,19 @@ ice_ptp_port_phy_stop(struct ice_ptp_port *ptp_port) mutex_lock(&ptp_port->ps_lock); - kthread_cancel_delayed_work_sync(&ptp_port->ov_work); + switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + err = ice_stop_phy_timer_eth56g(hw, port, true); + break; + case ICE_PHY_E82X: + kthread_cancel_delayed_work_sync(&ptp_port->ov_work); - err = ice_stop_phy_timer_e82x(hw, port, true); - if (err) + err = ice_stop_phy_timer_e82x(hw, port, true); + break; + default: + err = -ENODEV; + } + if (err && err != -EBUSY) dev_err(ice_pf_to_dev(pf), "PTP failed to set PHY port %d down, err %d\n", port, err); @@ -1378,27 +1409,39 @@ ice_ptp_port_phy_restart(struct ice_ptp_port *ptp_port) mutex_lock(&ptp_port->ps_lock); - kthread_cancel_delayed_work_sync(&ptp_port->ov_work); + switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + err = ice_start_phy_timer_eth56g(hw, port); + break; + case ICE_PHY_E82X: + /* Start the PHY timer in Vernier mode */ + kthread_cancel_delayed_work_sync(&ptp_port->ov_work); - /* temporarily disable Tx timestamps while calibrating PHY offset */ - spin_lock_irqsave(&ptp_port->tx.lock, flags); - ptp_port->tx.calibrating = true; - spin_unlock_irqrestore(&ptp_port->tx.lock, flags); - ptp_port->tx_fifo_busy_cnt = 0; + /* temporarily disable Tx timestamps while calibrating + * PHY offset + */ + spin_lock_irqsave(&ptp_port->tx.lock, flags); + ptp_port->tx.calibrating = true; + spin_unlock_irqrestore(&ptp_port->tx.lock, flags); + ptp_port->tx_fifo_busy_cnt = 0; - /* Start the PHY timer in Vernier mode */ - err = ice_start_phy_timer_e82x(hw, port); - if (err) - goto out_unlock; + /* Start the PHY timer in Vernier mode */ + err = ice_start_phy_timer_e82x(hw, port); + if (err) + break; - /* Enable Tx timestamps right away */ - spin_lock_irqsave(&ptp_port->tx.lock, flags); - ptp_port->tx.calibrating = false; - spin_unlock_irqrestore(&ptp_port->tx.lock, flags); + /* Enable Tx timestamps right away */ + spin_lock_irqsave(&ptp_port->tx.lock, flags); + ptp_port->tx.calibrating = false; + spin_unlock_irqrestore(&ptp_port->tx.lock, flags); - kthread_queue_delayed_work(pf->ptp.kworker, &ptp_port->ov_work, 0); + kthread_queue_delayed_work(pf->ptp.kworker, &ptp_port->ov_work, + 0); + break; + default: + err = -ENODEV; + } -out_unlock: if (err) dev_err(ice_pf_to_dev(pf), "PTP failed to set PHY port %d up, err %d\n", port, err); @@ -1436,6 +1479,7 @@ void ice_ptp_link_change(struct ice_pf *pf, u8 port, bool linkup) case ICE_PHY_E810: /* Do not reconfigure E810 PHY */ return; + case ICE_PHY_ETH56G: case ICE_PHY_E82X: ice_ptp_port_phy_restart(ptp_port); return; @@ -1465,6 +1509,22 @@ static int ice_ptp_cfg_phy_interrupt(struct ice_pf *pf, bool ena, u32 threshold) ice_ptp_reset_ts_memory(hw); switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: { + int port; + + for (port = 0; port < hw->ptp.num_lports; port++) { + int err; + + err = ice_phy_cfg_intr_eth56g(hw, port, ena, threshold); + if (err) { + dev_err(dev, "Failed to configure PHY interrupt for port %d, err %d\n", + port, err); + return err; + } + } + + return 0; + } case ICE_PHY_E82X: { int quad; @@ -3075,6 +3135,9 @@ static int ice_ptp_init_port(struct ice_pf *pf, struct ice_ptp_port *ptp_port) mutex_init(&ptp_port->ps_lock); switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + return ice_ptp_init_tx_eth56g(pf, &ptp_port->tx, + ptp_port->port_num); case ICE_PHY_E810: return ice_ptp_init_tx_e810(pf, &ptp_port->tx); case ICE_PHY_E82X: diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.h b/drivers/net/ethernet/intel/ice/ice_ptp.h index 3af20025043a..e0c23aaedc12 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.h +++ b/drivers/net/ethernet/intel/ice/ice_ptp.h @@ -153,6 +153,7 @@ struct ice_ptp_tx { #define INDEX_PER_QUAD 64 #define INDEX_PER_PORT_E82X 16 #define INDEX_PER_PORT_E810 64 +#define INDEX_PER_PORT_ETH56G 64 /** * struct ice_ptp_port - data used to initialize an external port for PTP diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h index 2c4dab0c48ab..ef180936f60c 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h +++ b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h @@ -9,6 +9,321 @@ */ /* Constants defined for the PTP 1588 clock hardware. */ +const struct ice_phy_reg_info_eth56g eth56g_phy_res[NUM_ETH56G_PHY_RES] = { + /* ETH56G_PHY_REG_PTP */ + { + /* base_addr */ + { + 0x092000, + 0x126000, + 0x1BA000, + 0x24E000, + 0x2E2000, + }, + /* step */ + 0x98, + }, + /* ETH56G_PHY_MEM_PTP */ + { + /* base_addr */ + { + 0x093000, + 0x127000, + 0x1BB000, + 0x24F000, + 0x2E3000, + }, + /* step */ + 0x200, + }, + /* ETH56G_PHY_REG_XPCS */ + { + /* base_addr */ + { + 0x000000, + 0x009400, + 0x128000, + 0x1BC000, + 0x250000, + }, + /* step */ + 0x21000, + }, + /* ETH56G_PHY_REG_MAC */ + { + /* base_addr */ + { + 0x085000, + 0x119000, + 0x1AD000, + 0x241000, + 0x2D5000, + }, + /* step */ + 0x1000, + }, + /* ETH56G_PHY_REG_GPCS */ + { + /* base_addr */ + { + 0x084000, + 0x118000, + 0x1AC000, + 0x240000, + 0x2D4000, + }, + /* step */ + 0x400, + }, +}; + +const +struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD] = { + [ICE_ETH56G_LNK_SPD_1G] = { + .tx_mode = { .def = 6, }, + .rx_mode = { .def = 6, }, + .blks_per_clk = 1, + .blktime = 0x4000, /* 32 */ + .tx_offset = { + .serdes = 0x6666, /* 51.2 */ + .no_fec = 0xd066, /* 104.2 */ + .sfd = 0x3000, /* 24 */ + .onestep = 0x30000 /* 384 */ + }, + .rx_offset = { + .serdes = 0xffffc59a, /* -29.2 */ + .no_fec = 0xffff0a80, /* -122.75 */ + .sfd = 0x2c00, /* 22 */ + .bs_ds = 0x19a /* 0.8 */ + /* Dynamic bitslip 0 equals to 10 */ + } + }, + [ICE_ETH56G_LNK_SPD_2_5G] = { + .tx_mode = { .def = 6, }, + .rx_mode = { .def = 6, }, + .blks_per_clk = 1, + .blktime = 0x199a, /* 12.8 */ + .tx_offset = { + .serdes = 0x28f6, /* 20.48 */ + .no_fec = 0x53b8, /* 41.86 */ + .sfd = 0x1333, /* 9.6 */ + .onestep = 0x13333 /* 153.6 */ + }, + .rx_offset = { + .serdes = 0xffffe8a4, /* -11.68 */ + .no_fec = 0xffff9a76, /* -50.77 */ + .sfd = 0xf33, /* 7.6 */ + .bs_ds = 0xa4 /* 0.32 */ + } + }, + [ICE_ETH56G_LNK_SPD_10G] = { + .tx_mode = { .def = 1, }, + .rx_mode = { .def = 1, }, + .blks_per_clk = 1, + .blktime = 0x666, /* 3.2 */ + .tx_offset = { + .serdes = 0x234c, /* 17.6484848 */ + .no_fec = 0x8e80, /* 71.25 */ + .fc = 0xb4a4, /* 90.32 */ + .sfd = 0x4a4, /* 2.32 */ + .onestep = 0x4ccd /* 38.4 */ + }, + .rx_offset = { + .serdes = 0xffffeb27, /* -10.42424 */ + .no_fec = 0xffffcccd, /* -25.6 */ + .fc = 0xfffe0014, /* -255.96 */ + .sfd = 0x4a4, /* 2.32 */ + .bs_ds = 0x32 /* 0.0969697 */ + } + }, + [ICE_ETH56G_LNK_SPD_25G] = { + .tx_mode = { + .def = 1, + .rs = 4 + }, + .tx_mk_dly = 4, + .tx_cw_dly = { + .def = 1, + .onestep = 6 + }, + .rx_mode = { + .def = 1, + .rs = 4 + }, + .rx_mk_dly = { + .def = 1, + .rs = 1 + }, + .rx_cw_dly = { + .def = 1, + .rs = 1 + }, + .blks_per_clk = 1, + .blktime = 0x28f, /* 1.28 */ + .mktime = 0x147b, /* 10.24, only if RS-FEC enabled */ + .tx_offset = { + .serdes = 0xe1e, /* 7.0593939 */ + .no_fec = 0x3857, /* 28.17 */ + .fc = 0x48c3, /* 36.38 */ + .rs = 0x8100, /* 64.5 */ + .sfd = 0x1dc, /* 0.93 */ + .onestep = 0x1eb8 /* 15.36 */ + }, + .rx_offset = { + .serdes = 0xfffff7a9, /* -4.1697 */ + .no_fec = 0xffffe71a, /* -12.45 */ + .fc = 0xfffe894d, /* -187.35 */ + .rs = 0xfffff8cd, /* -3.6 */ + .sfd = 0x1dc, /* 0.93 */ + .bs_ds = 0x14 /* 0.0387879, RS-FEC 0 */ + } + }, + [ICE_ETH56G_LNK_SPD_40G] = { + .tx_mode = { .def = 3 }, + .tx_mk_dly = 4, + .tx_cw_dly = { + .def = 1, + .onestep = 6 + }, + .rx_mode = { .def = 4 }, + .rx_mk_dly = { .def = 1 }, + .rx_cw_dly = { .def = 1 }, + .blktime = 0x333, /* 1.6 */ + .mktime = 0xccd, /* 6.4 */ + .tx_offset = { + .serdes = 0x234c, /* 17.6484848 */ + .no_fec = 0x5a8a, /* 45.27 */ + .fc = 0x81b8, /* 64.86 */ + .sfd = 0x4a4, /* 2.32 */ + .onestep = 0x1333 /* 9.6 */ + }, + .rx_offset = { + .serdes = 0xffffeb27, /* -10.42424 */ + .no_fec = 0xfffff594, /* -5.21 */ + .fc = 0xfffe3080, /* -231.75 */ + .sfd = 0x4a4, /* 2.32 */ + .bs_ds = 0xccd /* 6.4 */ + } + }, + [ICE_ETH56G_LNK_SPD_50G] = { + .tx_mode = { .def = 5 }, + .tx_mk_dly = 4, + .tx_cw_dly = { + .def = 1, + .onestep = 6 + }, + .rx_mode = { .def = 5 }, + .rx_mk_dly = { .def = 1 }, + .rx_cw_dly = { .def = 1 }, + .blktime = 0x28f, /* 1.28 */ + .mktime = 0xa3d, /* 5.12 */ + .tx_offset = { + .serdes = 0x13ba, /* 9.86353 */ + .rs = 0x5400, /* 42 */ + .sfd = 0xe6, /* 0.45 */ + .onestep = 0xf5c /* 7.68 */ + }, + .rx_offset = { + .serdes = 0xfffff7e8, /* -4.04706 */ + .rs = 0xfffff994, /* -3.21 */ + .sfd = 0xe6 /* 0.45 */ + } + }, + [ICE_ETH56G_LNK_SPD_50G2] = { + .tx_mode = { + .def = 3, + .rs = 2 + }, + .tx_mk_dly = 4, + .tx_cw_dly = { + .def = 1, + .onestep = 6 + }, + .rx_mode = { + .def = 4, + .rs = 1 + }, + .rx_mk_dly = { .def = 1 }, + .rx_cw_dly = { .def = 1 }, + .blktime = 0x28f, /* 1.28 */ + .mktime = 0xa3d, /* 5.12 */ + .tx_offset = { + .serdes = 0xe1e, /* 7.0593939 */ + .no_fec = 0x3d33, /* 30.6 */ + .rs = 0x5057, /* 40.17 */ + .sfd = 0x1dc, /* 0.93 */ + .onestep = 0xf5c /* 7.68 */ + }, + .rx_offset = { + .serdes = 0xfffff7a9, /* -4.1697 */ + .no_fec = 0xfffff8cd, /* -3.6 */ + .rs = 0xfffff21a, /* -6.95 */ + .sfd = 0x1dc, /* 0.93 */ + .bs_ds = 0xa3d /* 5.12, RS-FEC 0x633 (3.1) */ + } + }, + [ICE_ETH56G_LNK_SPD_100G] = { + .tx_mode = { + .def = 3, + .rs = 2 + }, + .tx_mk_dly = 10, + .tx_cw_dly = { + .def = 3, + .onestep = 6 + }, + .rx_mode = { + .def = 4, + .rs = 1 + }, + .rx_mk_dly = { .def = 5 }, + .rx_cw_dly = { .def = 5 }, + .blks_per_clk = 1, + .blktime = 0x148, /* 0.64 */ + .mktime = 0x199a, /* 12.8 */ + .tx_offset = { + .serdes = 0xe1e, /* 7.0593939 */ + .no_fec = 0x67ec, /* 51.96 */ + .rs = 0x44fb, /* 34.49 */ + .sfd = 0x1dc, /* 0.93 */ + .onestep = 0xf5c /* 7.68 */ + }, + .rx_offset = { + .serdes = 0xfffff7a9, /* -4.1697 */ + .no_fec = 0xfffff5a9, /* -5.17 */ + .rs = 0xfffff6e6, /* -4.55 */ + .sfd = 0x1dc, /* 0.93 */ + .bs_ds = 0x199a /* 12.8, RS-FEC 0x31b (1.552) */ + } + }, + [ICE_ETH56G_LNK_SPD_100G2] = { + .tx_mode = { .def = 5 }, + .tx_mk_dly = 10, + .tx_cw_dly = { + .def = 3, + .onestep = 6 + }, + .rx_mode = { .def = 5 }, + .rx_mk_dly = { .def = 5 }, + .rx_cw_dly = { .def = 5 }, + .blks_per_clk = 1, + .blktime = 0x148, /* 0.64 */ + .mktime = 0x199a, /* 12.8 */ + .tx_offset = { + .serdes = 0x13ba, /* 9.86353 */ + .rs = 0x460a, /* 35.02 */ + .sfd = 0xe6, /* 0.45 */ + .onestep = 0xf5c /* 7.68 */ + }, + .rx_offset = { + .serdes = 0xfffff7e8, /* -4.04706 */ + .rs = 0xfffff548, /* -5.36 */ + .sfd = 0xe6, /* 0.45 */ + .bs_ds = 0x303 /* 1.506 */ + } + } +}; + /* struct ice_time_ref_info_e82x * * E822 hardware can use different sources as the reference for the PTP diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c index 7224bce7aa28..6f29dac28f9f 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c @@ -2,6 +2,7 @@ /* Copyright (C) 2021, Intel Corporation. */ #include +#include #include "ice_common.h" #include "ice_ptp_hw.h" #include "ice_ptp_consts.h" @@ -642,6 +643,1810 @@ static void ice_ptp_exec_tmr_cmd(struct ice_hw *hw) ice_flush(hw); } +/* 56G PHY device functions + * + * The following functions operate on devices with the ETH 56G PHY. + */ + +/** + * ice_write_phy_eth56g - Write a PHY port register + * @hw: pointer to the HW struct + * @phy_idx: PHY index + * @addr: PHY register address + * @val: Value to write + * + * Return: 0 on success, other error codes when failed to write to PHY + */ +static int ice_write_phy_eth56g(struct ice_hw *hw, u8 phy_idx, u32 addr, + u32 val) +{ + struct ice_sbq_msg_input phy_msg; + int err; + + phy_msg.opcode = ice_sbq_msg_wr; + + phy_msg.msg_addr_low = lower_16_bits(addr); + phy_msg.msg_addr_high = upper_16_bits(addr); + + phy_msg.data = val; + phy_msg.dest_dev = hw->ptp.phy.eth56g.phy_addr[phy_idx]; + + err = ice_sbq_rw_reg(hw, &phy_msg); + + if (err) + ice_debug(hw, ICE_DBG_PTP, "PTP failed to send msg to phy %d\n", + err); + + return err; +} + +/** + * ice_read_phy_eth56g - Read a PHY port register + * @hw: pointer to the HW struct + * @phy_idx: PHY index + * @addr: PHY register address + * @val: Value to write + * + * Return: 0 on success, other error codes when failed to read from PHY + */ +static int ice_read_phy_eth56g(struct ice_hw *hw, u8 phy_idx, u32 addr, + u32 *val) +{ + struct ice_sbq_msg_input phy_msg; + int err; + + phy_msg.opcode = ice_sbq_msg_rd; + + phy_msg.msg_addr_low = lower_16_bits(addr); + phy_msg.msg_addr_high = upper_16_bits(addr); + + phy_msg.data = 0; + phy_msg.dest_dev = hw->ptp.phy.eth56g.phy_addr[phy_idx]; + + err = ice_sbq_rw_reg(hw, &phy_msg); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "PTP failed to send msg to phy %d\n", + err); + return err; + } + + *val = phy_msg.data; + + return 0; +} + +/** + * ice_phy_res_address_eth56g - Calculate a PHY port register address + * @port: Port number to be written + * @res_type: resource type (register/memory) + * @offset: Offset from PHY port register base + * @addr: The result address + * + * Return: + * * %0 - success + * * %EINVAL - invalid port number or resource type + */ +static int ice_phy_res_address_eth56g(u8 port, enum eth56g_res_type res_type, + u32 offset, u32 *addr) +{ + u8 lane = port % ICE_PORTS_PER_QUAD; + u8 phy = ICE_GET_QUAD_NUM(port); + + if (res_type >= NUM_ETH56G_PHY_RES) + return -EINVAL; + + *addr = eth56g_phy_res[res_type].base[phy] + + lane * eth56g_phy_res[res_type].step + offset; + return 0; +} + +/** + * ice_write_port_eth56g - Write a PHY port register + * @hw: pointer to the HW struct + * @offset: PHY register offset + * @port: Port number + * @val: Value to write + * @res_type: resource type (register/memory) + * + * Return: + * * %0 - success + * * %EINVAL - invalid port number or resource type + * * %other - failed to write to PHY + */ +static int ice_write_port_eth56g(struct ice_hw *hw, u8 port, u32 offset, + u32 val, enum eth56g_res_type res_type) +{ + u8 phy_port = port % hw->ptp.ports_per_phy; + u8 phy_idx = port / hw->ptp.ports_per_phy; + u32 addr; + int err; + + if (port >= hw->ptp.num_lports) + return -EINVAL; + + err = ice_phy_res_address_eth56g(phy_port, res_type, offset, &addr); + if (err) + return err; + + return ice_write_phy_eth56g(hw, phy_idx, addr, val); +} + +/** + * ice_read_port_eth56g - Read a PHY port register + * @hw: pointer to the HW struct + * @offset: PHY register offset + * @port: Port number + * @val: Value to write + * @res_type: resource type (register/memory) + * + * Return: + * * %0 - success + * * %EINVAL - invalid port number or resource type + * * %other - failed to read from PHY + */ +static int ice_read_port_eth56g(struct ice_hw *hw, u8 port, u32 offset, + u32 *val, enum eth56g_res_type res_type) +{ + u8 phy_port = port % hw->ptp.ports_per_phy; + u8 phy_idx = port / hw->ptp.ports_per_phy; + u32 addr; + int err; + + if (port >= hw->ptp.num_lports) + return -EINVAL; + + err = ice_phy_res_address_eth56g(phy_port, res_type, offset, &addr); + if (err) + return err; + + return ice_read_phy_eth56g(hw, phy_idx, addr, val); +} + +/** + * ice_write_ptp_reg_eth56g - Write a PHY port register + * @hw: pointer to the HW struct + * @port: Port number to be written + * @offset: Offset from PHY port register base + * @val: Value to write + * + * Return: + * * %0 - success + * * %EINVAL - invalid port number or resource type + * * %other - failed to write to PHY + */ +static int ice_write_ptp_reg_eth56g(struct ice_hw *hw, u8 port, u16 offset, + u32 val) +{ + return ice_write_port_eth56g(hw, port, offset, val, ETH56G_PHY_REG_PTP); +} + +/** + * ice_write_mac_reg_eth56g - Write a MAC PHY port register + * parameter + * @hw: pointer to the HW struct + * @port: Port number to be written + * @offset: Offset from PHY port register base + * @val: Value to write + * + * Return: + * * %0 - success + * * %EINVAL - invalid port number or resource type + * * %other - failed to write to PHY + */ +static int ice_write_mac_reg_eth56g(struct ice_hw *hw, u8 port, u32 offset, + u32 val) +{ + return ice_write_port_eth56g(hw, port, offset, val, ETH56G_PHY_REG_MAC); +} + +/** + * ice_write_xpcs_reg_eth56g - Write a PHY port register + * @hw: pointer to the HW struct + * @port: Port number to be written + * @offset: Offset from PHY port register base + * @val: Value to write + * + * Return: + * * %0 - success + * * %EINVAL - invalid port number or resource type + * * %other - failed to write to PHY + */ +static int ice_write_xpcs_reg_eth56g(struct ice_hw *hw, u8 port, u32 offset, + u32 val) +{ + return ice_write_port_eth56g(hw, port, offset, val, + ETH56G_PHY_REG_XPCS); +} + +/** + * ice_read_ptp_reg_eth56g - Read a PHY port register + * @hw: pointer to the HW struct + * @port: Port number to be read + * @offset: Offset from PHY port register base + * @val: Pointer to the value to read (out param) + * + * Return: + * * %0 - success + * * %EINVAL - invalid port number or resource type + * * %other - failed to read from PHY + */ +static int ice_read_ptp_reg_eth56g(struct ice_hw *hw, u8 port, u16 offset, + u32 *val) +{ + return ice_read_port_eth56g(hw, port, offset, val, ETH56G_PHY_REG_PTP); +} + +/** + * ice_read_mac_reg_eth56g - Read a PHY port register + * @hw: pointer to the HW struct + * @port: Port number to be read + * @offset: Offset from PHY port register base + * @val: Pointer to the value to read (out param) + * + * Return: + * * %0 - success + * * %EINVAL - invalid port number or resource type + * * %other - failed to read from PHY + */ +static int ice_read_mac_reg_eth56g(struct ice_hw *hw, u8 port, u16 offset, + u32 *val) +{ + return ice_read_port_eth56g(hw, port, offset, val, ETH56G_PHY_REG_MAC); +} + +/** + * ice_read_gpcs_reg_eth56g - Read a PHY port register + * @hw: pointer to the HW struct + * @port: Port number to be read + * @offset: Offset from PHY port register base + * @val: Pointer to the value to read (out param) + * + * Return: + * * %0 - success + * * %EINVAL - invalid port number or resource type + * * %other - failed to read from PHY + */ +static int ice_read_gpcs_reg_eth56g(struct ice_hw *hw, u8 port, u16 offset, + u32 *val) +{ + return ice_read_port_eth56g(hw, port, offset, val, ETH56G_PHY_REG_GPCS); +} + +/** + * ice_read_port_mem_eth56g - Read a PHY port memory location + * @hw: pointer to the HW struct + * @port: Port number to be read + * @offset: Offset from PHY port register base + * @val: Pointer to the value to read (out param) + * + * Return: + * * %0 - success + * * %EINVAL - invalid port number or resource type + * * %other - failed to read from PHY + */ +static int ice_read_port_mem_eth56g(struct ice_hw *hw, u8 port, u16 offset, + u32 *val) +{ + return ice_read_port_eth56g(hw, port, offset, val, ETH56G_PHY_MEM_PTP); +} + +/** + * ice_write_port_mem_eth56g - Write a PHY port memory location + * @hw: pointer to the HW struct + * @port: Port number to be read + * @offset: Offset from PHY port register base + * @val: Pointer to the value to read (out param) + * + * Return: + * * %0 - success + * * %EINVAL - invalid port number or resource type + * * %other - failed to write to PHY + */ +static int ice_write_port_mem_eth56g(struct ice_hw *hw, u8 port, u16 offset, + u32 val) +{ + return ice_write_port_eth56g(hw, port, offset, val, ETH56G_PHY_MEM_PTP); +} + +/** + * ice_is_64b_phy_reg_eth56g - Check if this is a 64bit PHY register + * @low_addr: the low address to check + * @high_addr: on return, contains the high address of the 64bit register + * + * Write the appropriate high register offset to use. + * + * Return: true if the provided low address is one of the known 64bit PHY values + * represented as two 32bit registers, false otherwise. + */ +static bool ice_is_64b_phy_reg_eth56g(u16 low_addr, u16 *high_addr) +{ + switch (low_addr) { + case PHY_REG_TX_TIMER_INC_PRE_L: + *high_addr = PHY_REG_TX_TIMER_INC_PRE_U; + return true; + case PHY_REG_RX_TIMER_INC_PRE_L: + *high_addr = PHY_REG_RX_TIMER_INC_PRE_U; + return true; + case PHY_REG_TX_CAPTURE_L: + *high_addr = PHY_REG_TX_CAPTURE_U; + return true; + case PHY_REG_RX_CAPTURE_L: + *high_addr = PHY_REG_RX_CAPTURE_U; + return true; + case PHY_REG_TOTAL_TX_OFFSET_L: + *high_addr = PHY_REG_TOTAL_TX_OFFSET_U; + return true; + case PHY_REG_TOTAL_RX_OFFSET_L: + *high_addr = PHY_REG_TOTAL_RX_OFFSET_U; + return true; + case PHY_REG_TX_MEMORY_STATUS_L: + *high_addr = PHY_REG_TX_MEMORY_STATUS_U; + return true; + default: + return false; + } +} + +/** + * ice_is_40b_phy_reg_eth56g - Check if this is a 40bit PHY register + * @low_addr: the low address to check + * @high_addr: on return, contains the high address of the 40bit value + * + * Write the appropriate high register offset to use. + * + * Return: true if if the provided low address is one of the known 40bit PHY + * values split into two registers with the lower 8 bits in the low register and + * the upper 32 bits in the high register, false otherwise. + */ +static bool ice_is_40b_phy_reg_eth56g(u16 low_addr, u16 *high_addr) +{ + switch (low_addr) { + case PHY_REG_TIMETUS_L: + *high_addr = PHY_REG_TIMETUS_U; + return true; + case PHY_PCS_REF_TUS_L: + *high_addr = PHY_PCS_REF_TUS_U; + return true; + case PHY_PCS_REF_INC_L: + *high_addr = PHY_PCS_REF_INC_U; + return true; + default: + return false; + } +} + +/** + * ice_read_64b_phy_reg_eth56g - Read a 64bit value from PHY registers + * @hw: pointer to the HW struct + * @port: PHY port to read from + * @low_addr: offset of the lower register to read from + * @val: on return, the contents of the 64bit value from the PHY registers + * @res_type: resource type + * + * Check if the caller has specified a known 40 bit register offset and read + * the two registers associated with a 40bit value and return it in the val + * pointer. + * + * Return: + * * %0 - success + * * %EINVAL - not a 64 bit register + * * %other - failed to read from PHY + */ +static int ice_read_64b_phy_reg_eth56g(struct ice_hw *hw, u8 port, u16 low_addr, + u64 *val, enum eth56g_res_type res_type) +{ + u16 high_addr; + u32 lo, hi; + int err; + + if (!ice_is_64b_phy_reg_eth56g(low_addr, &high_addr)) + return -EINVAL; + + err = ice_read_port_eth56g(hw, port, low_addr, &lo, res_type); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to read from low register %#08x\n, err %d", + low_addr, err); + return err; + } + + err = ice_read_port_eth56g(hw, port, high_addr, &hi, res_type); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to read from high register %#08x\n, err %d", + high_addr, err); + return err; + } + + *val = ((u64)hi << 32) | lo; + + return 0; +} + +/** + * ice_read_64b_ptp_reg_eth56g - Read a 64bit value from PHY registers + * @hw: pointer to the HW struct + * @port: PHY port to read from + * @low_addr: offset of the lower register to read from + * @val: on return, the contents of the 64bit value from the PHY registers + * + * Check if the caller has specified a known 40 bit register offset and read + * the two registers associated with a 40bit value and return it in the val + * pointer. + * + * Return: + * * %0 - success + * * %EINVAL - not a 64 bit register + * * %other - failed to read from PHY + */ +static int ice_read_64b_ptp_reg_eth56g(struct ice_hw *hw, u8 port, u16 low_addr, + u64 *val) +{ + return ice_read_64b_phy_reg_eth56g(hw, port, low_addr, val, + ETH56G_PHY_REG_PTP); +} + +/** + * ice_write_40b_phy_reg_eth56g - Write a 40b value to the PHY + * @hw: pointer to the HW struct + * @port: port to write to + * @low_addr: offset of the low register + * @val: 40b value to write + * @res_type: resource type + * + * Check if the caller has specified a known 40 bit register offset and write + * provided 40b value to the two associated registers by splitting it up into + * two chunks, the lower 8 bits and the upper 32 bits. + * + * Return: + * * %0 - success + * * %EINVAL - not a 40 bit register + * * %other - failed to write to PHY + */ +static int ice_write_40b_phy_reg_eth56g(struct ice_hw *hw, u8 port, + u16 low_addr, u64 val, + enum eth56g_res_type res_type) +{ + u16 high_addr; + u32 lo, hi; + int err; + + if (!ice_is_40b_phy_reg_eth56g(low_addr, &high_addr)) + return -EINVAL; + + lo = FIELD_GET(P_REG_40B_LOW_M, val); + hi = (u32)(val >> P_REG_40B_HIGH_S); + + err = ice_write_port_eth56g(hw, port, low_addr, lo, res_type); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to write to low register 0x%08x\n, err %d", + low_addr, err); + return err; + } + + err = ice_write_port_eth56g(hw, port, high_addr, hi, res_type); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to write to high register 0x%08x\n, err %d", + high_addr, err); + return err; + } + + return 0; +} + +/** + * ice_write_40b_ptp_reg_eth56g - Write a 40b value to the PHY + * @hw: pointer to the HW struct + * @port: port to write to + * @low_addr: offset of the low register + * @val: 40b value to write + * + * Check if the caller has specified a known 40 bit register offset and write + * provided 40b value to the two associated registers by splitting it up into + * two chunks, the lower 8 bits and the upper 32 bits. + * + * Return: + * * %0 - success + * * %EINVAL - not a 40 bit register + * * %other - failed to write to PHY + */ +static int ice_write_40b_ptp_reg_eth56g(struct ice_hw *hw, u8 port, + u16 low_addr, u64 val) +{ + return ice_write_40b_phy_reg_eth56g(hw, port, low_addr, val, + ETH56G_PHY_REG_PTP); +} + +/** + * ice_write_64b_phy_reg_eth56g - Write a 64bit value to PHY registers + * @hw: pointer to the HW struct + * @port: PHY port to read from + * @low_addr: offset of the lower register to read from + * @val: the contents of the 64bit value to write to PHY + * @res_type: resource type + * + * Check if the caller has specified a known 64 bit register offset and write + * the 64bit value to the two associated 32bit PHY registers. + * + * Return: + * * %0 - success + * * %EINVAL - not a 64 bit register + * * %other - failed to write to PHY + */ +static int ice_write_64b_phy_reg_eth56g(struct ice_hw *hw, u8 port, + u16 low_addr, u64 val, + enum eth56g_res_type res_type) +{ + u16 high_addr; + u32 lo, hi; + int err; + + if (!ice_is_64b_phy_reg_eth56g(low_addr, &high_addr)) + return -EINVAL; + + lo = lower_32_bits(val); + hi = upper_32_bits(val); + + err = ice_write_port_eth56g(hw, port, low_addr, lo, res_type); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to write to low register 0x%08x\n, err %d", + low_addr, err); + return err; + } + + err = ice_write_port_eth56g(hw, port, high_addr, hi, res_type); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to write to high register 0x%08x\n, err %d", + high_addr, err); + return err; + } + + return 0; +} + +/** + * ice_write_64b_ptp_reg_eth56g - Write a 64bit value to PHY registers + * @hw: pointer to the HW struct + * @port: PHY port to read from + * @low_addr: offset of the lower register to read from + * @val: the contents of the 64bit value to write to PHY + * + * Check if the caller has specified a known 64 bit register offset and write + * the 64bit value to the two associated 32bit PHY registers. + * + * Return: + * * %0 - success + * * %EINVAL - not a 64 bit register + * * %other - failed to write to PHY + */ +static int ice_write_64b_ptp_reg_eth56g(struct ice_hw *hw, u8 port, + u16 low_addr, u64 val) +{ + return ice_write_64b_phy_reg_eth56g(hw, port, low_addr, val, + ETH56G_PHY_REG_PTP); +} + +/** + * ice_read_ptp_tstamp_eth56g - Read a PHY timestamp out of the port memory + * @hw: pointer to the HW struct + * @port: the port to read from + * @idx: the timestamp index to read + * @tstamp: on return, the 40bit timestamp value + * + * Read a 40bit timestamp value out of the two associated entries in the + * port memory block of the internal PHYs of the 56G devices. + * + * Return: + * * %0 - success + * * %other - failed to read from PHY + */ +static int ice_read_ptp_tstamp_eth56g(struct ice_hw *hw, u8 port, u8 idx, + u64 *tstamp) +{ + u16 lo_addr, hi_addr; + u32 lo, hi; + int err; + + lo_addr = (u16)PHY_TSTAMP_L(idx); + hi_addr = (u16)PHY_TSTAMP_U(idx); + + err = ice_read_port_mem_eth56g(hw, port, lo_addr, &lo); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to read low PTP timestamp register, err %d\n", + err); + return err; + } + + err = ice_read_port_mem_eth56g(hw, port, hi_addr, &hi); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to read high PTP timestamp register, err %d\n", + err); + return err; + } + + /* For 56G based internal PHYs, the timestamp is reported with the + * lower 8 bits in the low register, and the upper 32 bits in the high + * register. + */ + *tstamp = ((u64)hi) << TS_PHY_HIGH_S | ((u64)lo & TS_PHY_LOW_M); + + return 0; +} + +/** + * ice_clear_ptp_tstamp_eth56g - Clear a timestamp from the quad block + * @hw: pointer to the HW struct + * @port: the quad to read from + * @idx: the timestamp index to reset + * + * Read and then forcibly clear the timestamp index to ensure the valid bit is + * cleared and the timestamp status bit is reset in the PHY port memory of + * internal PHYs of the 56G devices. + * + * To directly clear the contents of the timestamp block entirely, discarding + * all timestamp data at once, software should instead use + * ice_ptp_reset_ts_memory_quad_eth56g(). + * + * This function should only be called on an idx whose bit is set according to + * ice_get_phy_tx_tstamp_ready(). + * + * Return: + * * %0 - success + * * %other - failed to write to PHY + */ +static int ice_clear_ptp_tstamp_eth56g(struct ice_hw *hw, u8 port, u8 idx) +{ + u64 unused_tstamp; + u16 lo_addr; + int err; + + /* Read the timestamp register to ensure the timestamp status bit is + * cleared. + */ + err = ice_read_ptp_tstamp_eth56g(hw, port, idx, &unused_tstamp); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to read the PHY timestamp register for port %u, idx %u, err %d\n", + port, idx, err); + } + + lo_addr = (u16)PHY_TSTAMP_L(idx); + + err = ice_write_port_mem_eth56g(hw, port, lo_addr, 0); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to clear low PTP timestamp register for port %u, idx %u, err %d\n", + port, idx, err); + return err; + } + + return 0; +} + +/** + * ice_ptp_reset_ts_memory_eth56g - Clear all timestamps from the port block + * @hw: pointer to the HW struct + */ +static void ice_ptp_reset_ts_memory_eth56g(struct ice_hw *hw) +{ + unsigned int port; + + for (port = 0; port < hw->ptp.num_lports; port++) { + ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_MEMORY_STATUS_L, + 0); + ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_MEMORY_STATUS_U, + 0); + } +} + +/** + * ice_ptp_prep_port_time_eth56g - Prepare one PHY port with initial time + * @hw: pointer to the HW struct + * @port: port number + * @time: time to initialize the PHY port clocks to + * + * Write a new initial time value into registers of a specific PHY port. + * + * Return: + * * %0 - success + * * %other - failed to write to PHY + */ +static int ice_ptp_prep_port_time_eth56g(struct ice_hw *hw, u8 port, + u64 time) +{ + int err; + + /* Tx case */ + err = ice_write_64b_ptp_reg_eth56g(hw, port, PHY_REG_TX_TIMER_INC_PRE_L, + time); + if (err) + return err; + + /* Rx case */ + return ice_write_64b_ptp_reg_eth56g(hw, port, + PHY_REG_RX_TIMER_INC_PRE_L, time); +} + +/** + * ice_ptp_prep_phy_time_eth56g - Prepare PHY port with initial time + * @hw: pointer to the HW struct + * @time: Time to initialize the PHY port clocks to + * + * Program the PHY port registers with a new initial time value. The port + * clock will be initialized once the driver issues an ICE_PTP_INIT_TIME sync + * command. The time value is the upper 32 bits of the PHY timer, usually in + * units of nominal nanoseconds. + * + * Return: + * * %0 - success + * * %other - failed to write to PHY + */ +static int ice_ptp_prep_phy_time_eth56g(struct ice_hw *hw, u32 time) +{ + u64 phy_time; + u8 port; + + /* The time represents the upper 32 bits of the PHY timer, so we need + * to shift to account for this when programming. + */ + phy_time = (u64)time << 32; + + for (port = 0; port < hw->ptp.num_lports; port++) { + int err; + + err = ice_ptp_prep_port_time_eth56g(hw, port, phy_time); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to write init time for port %u, err %d\n", + port, err); + return err; + } + } + + return 0; +} + +/** + * ice_ptp_prep_port_adj_eth56g - Prepare a single port for time adjust + * @hw: pointer to HW struct + * @port: Port number to be programmed + * @time: time in cycles to adjust the port clocks + * + * Program the port for an atomic adjustment by writing the Tx and Rx timer + * registers. The atomic adjustment won't be completed until the driver issues + * an ICE_PTP_ADJ_TIME command. + * + * Note that time is not in units of nanoseconds. It is in clock time + * including the lower sub-nanosecond portion of the port timer. + * + * Negative adjustments are supported using 2s complement arithmetic. + * + * Return: + * * %0 - success + * * %other - failed to write to PHY + */ +static int ice_ptp_prep_port_adj_eth56g(struct ice_hw *hw, u8 port, s64 time) +{ + u32 l_time, u_time; + int err; + + l_time = lower_32_bits(time); + u_time = upper_32_bits(time); + + /* Tx case */ + err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_TIMER_INC_PRE_L, + l_time); + if (err) + goto exit_err; + + err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_TIMER_INC_PRE_U, + u_time); + if (err) + goto exit_err; + + /* Rx case */ + err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_RX_TIMER_INC_PRE_L, + l_time); + if (err) + goto exit_err; + + err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_RX_TIMER_INC_PRE_U, + u_time); + if (err) + goto exit_err; + + return 0; + +exit_err: + ice_debug(hw, ICE_DBG_PTP, "Failed to write time adjust for port %u, err %d\n", + port, err); + return err; +} + +/** + * ice_ptp_prep_phy_adj_eth56g - Prep PHY ports for a time adjustment + * @hw: pointer to HW struct + * @adj: adjustment in nanoseconds + * + * Prepare the PHY ports for an atomic time adjustment by programming the PHY + * Tx and Rx port registers. The actual adjustment is completed by issuing an + * ICE_PTP_ADJ_TIME or ICE_PTP_ADJ_TIME_AT_TIME sync command. + * + * Return: + * * %0 - success + * * %other - failed to write to PHY + */ +static int ice_ptp_prep_phy_adj_eth56g(struct ice_hw *hw, s32 adj) +{ + s64 cycles; + u8 port; + + /* The port clock supports adjustment of the sub-nanosecond portion of + * the clock (lowest 32 bits). We shift the provided adjustment in + * nanoseconds by 32 to calculate the appropriate adjustment to program + * into the PHY ports. + */ + cycles = (s64)adj << 32; + + for (port = 0; port < hw->ptp.num_lports; port++) { + int err; + + err = ice_ptp_prep_port_adj_eth56g(hw, port, cycles); + if (err) + return err; + } + + return 0; +} + +/** + * ice_ptp_prep_phy_incval_eth56g - Prepare PHY ports for time adjustment + * @hw: pointer to HW struct + * @incval: new increment value to prepare + * + * Prepare each of the PHY ports for a new increment value by programming the + * port's TIMETUS registers. The new increment value will be updated after + * issuing an ICE_PTP_INIT_INCVAL command. + * + * Return: + * * %0 - success + * * %other - failed to write to PHY + */ +static int ice_ptp_prep_phy_incval_eth56g(struct ice_hw *hw, u64 incval) +{ + u8 port; + + for (port = 0; port < hw->ptp.num_lports; port++) { + int err; + + err = ice_write_40b_ptp_reg_eth56g(hw, port, PHY_REG_TIMETUS_L, + incval); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to write incval for port %u, err %d\n", + port, err); + return err; + } + } + + return 0; +} + +/** + * ice_ptp_read_port_capture_eth56g - Read a port's local time capture + * @hw: pointer to HW struct + * @port: Port number to read + * @tx_ts: on return, the Tx port time capture + * @rx_ts: on return, the Rx port time capture + * + * Read the port's Tx and Rx local time capture values. + * + * Return: + * * %0 - success + * * %other - failed to read from PHY + */ +static int ice_ptp_read_port_capture_eth56g(struct ice_hw *hw, u8 port, + u64 *tx_ts, u64 *rx_ts) +{ + int err; + + /* Tx case */ + err = ice_read_64b_ptp_reg_eth56g(hw, port, PHY_REG_TX_CAPTURE_L, + tx_ts); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to read REG_TX_CAPTURE, err %d\n", + err); + return err; + } + + ice_debug(hw, ICE_DBG_PTP, "tx_init = %#016llx\n", *tx_ts); + + /* Rx case */ + err = ice_read_64b_ptp_reg_eth56g(hw, port, PHY_REG_RX_CAPTURE_L, + rx_ts); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to read RX_CAPTURE, err %d\n", + err); + return err; + } + + ice_debug(hw, ICE_DBG_PTP, "rx_init = %#016llx\n", *rx_ts); + + return 0; +} + +/** + * ice_ptp_write_port_cmd_eth56g - Prepare a single PHY port for a timer command + * @hw: pointer to HW struct + * @port: Port to which cmd has to be sent + * @cmd: Command to be sent to the port + * + * Prepare the requested port for an upcoming timer sync command. + * + * Return: + * * %0 - success + * * %other - failed to write to PHY + */ +static int ice_ptp_write_port_cmd_eth56g(struct ice_hw *hw, u8 port, + enum ice_ptp_tmr_cmd cmd) +{ + u32 val = ice_ptp_tmr_cmd_to_port_reg(hw, cmd); + int err; + + /* Tx case */ + err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_TMR_CMD, val); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to write back TX_TMR_CMD, err %d\n", + err); + return err; + } + + /* Rx case */ + err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_RX_TMR_CMD, val); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to write back RX_TMR_CMD, err %d\n", + err); + return err; + } + + return 0; +} + +/** + * ice_phy_get_speed_eth56g - Get link speed based on PHY link type + * @li: pointer to link information struct + * + * Return: simplified ETH56G PHY speed + */ +static enum ice_eth56g_link_spd +ice_phy_get_speed_eth56g(struct ice_link_status *li) +{ + u16 speed = ice_get_link_speed_based_on_phy_type(li->phy_type_low, + li->phy_type_high); + + switch (speed) { + case ICE_AQ_LINK_SPEED_1000MB: + return ICE_ETH56G_LNK_SPD_1G; + case ICE_AQ_LINK_SPEED_2500MB: + return ICE_ETH56G_LNK_SPD_2_5G; + case ICE_AQ_LINK_SPEED_10GB: + return ICE_ETH56G_LNK_SPD_10G; + case ICE_AQ_LINK_SPEED_25GB: + return ICE_ETH56G_LNK_SPD_25G; + case ICE_AQ_LINK_SPEED_40GB: + return ICE_ETH56G_LNK_SPD_40G; + case ICE_AQ_LINK_SPEED_50GB: + switch (li->phy_type_low) { + case ICE_PHY_TYPE_LOW_50GBASE_SR: + case ICE_PHY_TYPE_LOW_50GBASE_FR: + case ICE_PHY_TYPE_LOW_50GBASE_LR: + case ICE_PHY_TYPE_LOW_50GBASE_KR_PAM4: + case ICE_PHY_TYPE_LOW_50G_AUI1_AOC_ACC: + case ICE_PHY_TYPE_LOW_50G_AUI1: + return ICE_ETH56G_LNK_SPD_50G; + default: + return ICE_ETH56G_LNK_SPD_50G2; + } + case ICE_AQ_LINK_SPEED_100GB: + if (li->phy_type_high || + li->phy_type_low == ICE_PHY_TYPE_LOW_100GBASE_SR2) + return ICE_ETH56G_LNK_SPD_100G2; + else + return ICE_ETH56G_LNK_SPD_100G; + default: + return ICE_ETH56G_LNK_SPD_1G; + } +} + +/** + * ice_phy_cfg_parpcs_eth56g - Configure TUs per PAR/PCS clock cycle + * @hw: pointer to the HW struct + * @port: port to configure + * + * Configure the number of TUs for the PAR and PCS clocks used as part of the + * timestamp calibration process. + * + * Return: + * * %0 - success + * * %other - PHY read/write failed + */ +static int ice_phy_cfg_parpcs_eth56g(struct ice_hw *hw, u8 port) +{ + u8 port_blk = port & ~(ICE_PORTS_PER_QUAD - 1); + u32 val; + int err; + + err = ice_write_xpcs_reg_eth56g(hw, port, PHY_VENDOR_TXLANE_THRESH, + ICE_ETH56G_NOMINAL_THRESH4); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to read VENDOR_TXLANE_THRESH, status: %d", + err); + return err; + } + + switch (ice_phy_get_speed_eth56g(&hw->port_info->phy.link_info)) { + case ICE_ETH56G_LNK_SPD_1G: + case ICE_ETH56G_LNK_SPD_2_5G: + err = ice_read_ptp_reg_eth56g(hw, port_blk, + PHY_GPCS_CONFIG_REG0, &val); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to read PHY_GPCS_CONFIG_REG0, status: %d", + err); + return err; + } + + val &= ~PHY_GPCS_CONFIG_REG0_TX_THR_M; + val |= FIELD_PREP(PHY_GPCS_CONFIG_REG0_TX_THR_M, + ICE_ETH56G_NOMINAL_TX_THRESH); + + err = ice_write_ptp_reg_eth56g(hw, port_blk, + PHY_GPCS_CONFIG_REG0, val); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to write PHY_GPCS_CONFIG_REG0, status: %d", + err); + return err; + } + break; + default: + break; + } + + err = ice_write_40b_ptp_reg_eth56g(hw, port, PHY_PCS_REF_TUS_L, + ICE_ETH56G_NOMINAL_PCS_REF_TUS); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to write PHY_PCS_REF_TUS, status: %d", + err); + return err; + } + + err = ice_write_40b_ptp_reg_eth56g(hw, port, PHY_PCS_REF_INC_L, + ICE_ETH56G_NOMINAL_PCS_REF_INC); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to write PHY_PCS_REF_INC, status: %d", + err); + return err; + } + + return 0; +} + +/** + * ice_phy_cfg_ptp_1step_eth56g - Configure 1-step PTP settings + * @hw: Pointer to the HW struct + * @port: Port to configure + * + * Return: + * * %0 - success + * * %other - PHY read/write failed + */ +int ice_phy_cfg_ptp_1step_eth56g(struct ice_hw *hw, u8 port) +{ + u8 port_blk = port & ~(ICE_PORTS_PER_QUAD - 1); + u8 blk_port = port & (ICE_PORTS_PER_QUAD - 1); + bool enable, sfd_ena; + u32 val, peer_delay; + int err; + + enable = hw->ptp.phy.eth56g.onestep_ena; + peer_delay = hw->ptp.phy.eth56g.peer_delay; + sfd_ena = hw->ptp.phy.eth56g.sfd_ena; + + /* PHY_PTP_1STEP_CONFIG */ + err = ice_read_ptp_reg_eth56g(hw, port_blk, PHY_PTP_1STEP_CONFIG, &val); + if (err) + return err; + + if (enable) + val |= blk_port; + else + val &= ~blk_port; + + val &= ~(PHY_PTP_1STEP_T1S_UP64_M | PHY_PTP_1STEP_T1S_DELTA_M); + + err = ice_write_ptp_reg_eth56g(hw, port_blk, PHY_PTP_1STEP_CONFIG, val); + if (err) + return err; + + /* PHY_PTP_1STEP_PEER_DELAY */ + val = FIELD_PREP(PHY_PTP_1STEP_PD_DELAY_M, peer_delay); + if (peer_delay) + val |= PHY_PTP_1STEP_PD_ADD_PD_M; + val |= PHY_PTP_1STEP_PD_DLY_V_M; + err = ice_write_ptp_reg_eth56g(hw, port_blk, + PHY_PTP_1STEP_PEER_DELAY(blk_port), val); + if (err) + return err; + + val &= ~PHY_PTP_1STEP_PD_DLY_V_M; + err = ice_write_ptp_reg_eth56g(hw, port_blk, + PHY_PTP_1STEP_PEER_DELAY(blk_port), val); + if (err) + return err; + + /* PHY_MAC_XIF_MODE */ + err = ice_read_mac_reg_eth56g(hw, port, PHY_MAC_XIF_MODE, &val); + if (err) + return err; + + val &= ~(PHY_MAC_XIF_1STEP_ENA_M | PHY_MAC_XIF_TS_BIN_MODE_M | + PHY_MAC_XIF_TS_SFD_ENA_M | PHY_MAC_XIF_GMII_TS_SEL_M); + + switch (ice_phy_get_speed_eth56g(&hw->port_info->phy.link_info)) { + case ICE_ETH56G_LNK_SPD_1G: + case ICE_ETH56G_LNK_SPD_2_5G: + val |= PHY_MAC_XIF_GMII_TS_SEL_M; + break; + default: + break; + } + + val |= FIELD_PREP(PHY_MAC_XIF_1STEP_ENA_M, enable) | + FIELD_PREP(PHY_MAC_XIF_TS_BIN_MODE_M, enable) | + FIELD_PREP(PHY_MAC_XIF_TS_SFD_ENA_M, sfd_ena); + + return ice_write_mac_reg_eth56g(hw, port, PHY_MAC_XIF_MODE, val); +} + +/** + * mul_u32_u32_fx_q9 - Multiply two u32 fixed point Q9 values + * @a: multiplier value + * @b: multiplicand value + * + * Return: result of multiplication + */ +static u32 mul_u32_u32_fx_q9(u32 a, u32 b) +{ + return (u32)(((u64)a * b) >> ICE_ETH56G_MAC_CFG_FRAC_W); +} + +/** + * add_u32_u32_fx - Add two u32 fixed point values and discard overflow + * @a: first value + * @b: second value + * + * Return: result of addition + */ +static u32 add_u32_u32_fx(u32 a, u32 b) +{ + return lower_32_bits(((u64)a + b)); +} + +/** + * ice_ptp_calc_bitslip_eth56g - Calculate bitslip value + * @hw: pointer to the HW struct + * @port: port to configure + * @bs: bitslip multiplier + * @fc: FC-FEC enabled + * @rs: RS-FEC enabled + * @spd: link speed + * + * Return: calculated bitslip value + */ +static u32 ice_ptp_calc_bitslip_eth56g(struct ice_hw *hw, u8 port, u32 bs, + bool fc, bool rs, + enum ice_eth56g_link_spd spd) +{ + u8 port_offset = port & (ICE_PORTS_PER_QUAD - 1); + u8 port_blk = port & ~(ICE_PORTS_PER_QUAD - 1); + u32 bitslip; + int err; + + if (!bs || rs) + return 0; + + if (spd == ICE_ETH56G_LNK_SPD_1G || spd == ICE_ETH56G_LNK_SPD_2_5G) + err = ice_read_gpcs_reg_eth56g(hw, port, PHY_GPCS_BITSLIP, + &bitslip); + else + err = ice_read_ptp_reg_eth56g(hw, port_blk, + PHY_REG_SD_BIT_SLIP(port_offset), + &bitslip); + if (err) + return 0; + + if (spd == ICE_ETH56G_LNK_SPD_1G && !bitslip) { + /* Bitslip register value of 0 corresponds to 10 so substitute + * it for calculations + */ + bitslip = 10; + } else if (spd == ICE_ETH56G_LNK_SPD_10G || + spd == ICE_ETH56G_LNK_SPD_25G) { + if (fc) + bitslip = bitslip * 2 + 32; + else + bitslip = (u32)((s32)bitslip * -1 + 20); + } + + bitslip <<= ICE_ETH56G_MAC_CFG_FRAC_W; + return mul_u32_u32_fx_q9(bitslip, bs); +} + +/** + * ice_ptp_calc_deskew_eth56g - Calculate deskew value + * @hw: pointer to the HW struct + * @port: port to configure + * @ds: deskew multiplier + * @rs: RS-FEC enabled + * @spd: link speed + * + * Return: calculated deskew value + */ +static u32 ice_ptp_calc_deskew_eth56g(struct ice_hw *hw, u8 port, u32 ds, + bool rs, enum ice_eth56g_link_spd spd) +{ + u32 deskew_i, deskew_f; + int err; + + if (!ds) + return 0; + + read_poll_timeout(ice_read_ptp_reg_eth56g, err, + FIELD_GET(PHY_REG_DESKEW_0_VALID, deskew_i), 500, + 50 * USEC_PER_MSEC, false, hw, port, PHY_REG_DESKEW_0, + &deskew_i); + if (err) + return err; + + deskew_f = FIELD_GET(PHY_REG_DESKEW_0_RLEVEL_FRAC, deskew_i); + deskew_i = FIELD_GET(PHY_REG_DESKEW_0_RLEVEL, deskew_i); + + if (rs && spd == ICE_ETH56G_LNK_SPD_50G2) + ds = 0x633; /* 3.1 */ + else if (rs && spd == ICE_ETH56G_LNK_SPD_100G) + ds = 0x31b; /* 1.552 */ + + deskew_i = FIELD_PREP(ICE_ETH56G_MAC_CFG_RX_OFFSET_INT, deskew_i); + /* Shift 3 fractional bits to the end of the integer part */ + deskew_f <<= ICE_ETH56G_MAC_CFG_FRAC_W - PHY_REG_DESKEW_0_RLEVEL_FRAC_W; + return mul_u32_u32_fx_q9(deskew_i | deskew_f, ds); +} + +/** + * ice_phy_set_offsets_eth56g - Set Tx/Rx offset values + * @hw: pointer to the HW struct + * @port: port to configure + * @spd: link speed + * @cfg: structure to store output values + * @fc: FC-FEC enabled + * @rs: RS-FEC enabled + * + * Return: + * * %0 - success + * * %other - failed to write to PHY + */ +static int ice_phy_set_offsets_eth56g(struct ice_hw *hw, u8 port, + enum ice_eth56g_link_spd spd, + const struct ice_eth56g_mac_reg_cfg *cfg, + bool fc, bool rs) +{ + u32 rx_offset, tx_offset, bs_ds; + bool onestep, sfd; + + onestep = hw->ptp.phy.eth56g.onestep_ena; + sfd = hw->ptp.phy.eth56g.sfd_ena; + bs_ds = cfg->rx_offset.bs_ds; + + if (fc) + rx_offset = cfg->rx_offset.fc; + else if (rs) + rx_offset = cfg->rx_offset.rs; + else + rx_offset = cfg->rx_offset.no_fec; + + rx_offset = add_u32_u32_fx(rx_offset, cfg->rx_offset.serdes); + if (sfd) + rx_offset = add_u32_u32_fx(rx_offset, cfg->rx_offset.sfd); + + if (spd < ICE_ETH56G_LNK_SPD_40G) + bs_ds = ice_ptp_calc_bitslip_eth56g(hw, port, bs_ds, fc, rs, + spd); + else + bs_ds = ice_ptp_calc_deskew_eth56g(hw, port, bs_ds, rs, spd); + rx_offset = add_u32_u32_fx(rx_offset, bs_ds); + rx_offset &= ICE_ETH56G_MAC_CFG_RX_OFFSET_INT | + ICE_ETH56G_MAC_CFG_RX_OFFSET_FRAC; + + if (fc) + tx_offset = cfg->tx_offset.fc; + else if (rs) + tx_offset = cfg->tx_offset.rs; + else + tx_offset = cfg->tx_offset.no_fec; + tx_offset += cfg->tx_offset.serdes + cfg->tx_offset.sfd * sfd + + cfg->tx_offset.onestep * onestep; + + ice_write_mac_reg_eth56g(hw, port, PHY_MAC_RX_OFFSET, rx_offset); + return ice_write_mac_reg_eth56g(hw, port, PHY_MAC_TX_OFFSET, tx_offset); +} + +/** + * ice_phy_cfg_mac_eth56g - Configure MAC for PTP + * @hw: Pointer to the HW struct + * @port: Port to configure + * + * Return: + * * %0 - success + * * %other - failed to write to PHY + */ +static int ice_phy_cfg_mac_eth56g(struct ice_hw *hw, u8 port) +{ + const struct ice_eth56g_mac_reg_cfg *cfg; + enum ice_eth56g_link_spd spd; + struct ice_link_status *li; + bool fc = false; + bool rs = false; + bool onestep; + u32 val; + int err; + + onestep = hw->ptp.phy.eth56g.onestep_ena; + li = &hw->port_info->phy.link_info; + spd = ice_phy_get_speed_eth56g(li); + if (!!(li->an_info & ICE_AQ_FEC_EN)) { + if (spd == ICE_ETH56G_LNK_SPD_10G) { + fc = true; + } else { + fc = !!(li->fec_info & ICE_AQ_LINK_25G_KR_FEC_EN); + rs = !!(li->fec_info & ~ICE_AQ_LINK_25G_KR_FEC_EN); + } + } + cfg = ð56g_mac_cfg[spd]; + + err = ice_write_mac_reg_eth56g(hw, port, PHY_MAC_RX_MODULO, 0); + if (err) + return err; + + err = ice_write_mac_reg_eth56g(hw, port, PHY_MAC_TX_MODULO, 0); + if (err) + return err; + + val = FIELD_PREP(PHY_MAC_TSU_CFG_TX_MODE_M, + cfg->tx_mode.def + rs * cfg->tx_mode.rs) | + FIELD_PREP(PHY_MAC_TSU_CFG_TX_MII_MK_DLY_M, cfg->tx_mk_dly) | + FIELD_PREP(PHY_MAC_TSU_CFG_TX_MII_CW_DLY_M, + cfg->tx_cw_dly.def + + onestep * cfg->tx_cw_dly.onestep) | + FIELD_PREP(PHY_MAC_TSU_CFG_RX_MODE_M, + cfg->rx_mode.def + rs * cfg->rx_mode.rs) | + FIELD_PREP(PHY_MAC_TSU_CFG_RX_MII_MK_DLY_M, + cfg->rx_mk_dly.def + rs * cfg->rx_mk_dly.rs) | + FIELD_PREP(PHY_MAC_TSU_CFG_RX_MII_CW_DLY_M, + cfg->rx_cw_dly.def + rs * cfg->rx_cw_dly.rs) | + FIELD_PREP(PHY_MAC_TSU_CFG_BLKS_PER_CLK_M, cfg->blks_per_clk); + err = ice_write_mac_reg_eth56g(hw, port, PHY_MAC_TSU_CONFIG, val); + if (err) + return err; + + err = ice_write_mac_reg_eth56g(hw, port, PHY_MAC_BLOCKTIME, + cfg->blktime); + if (err) + return err; + + err = ice_phy_set_offsets_eth56g(hw, port, spd, cfg, fc, rs); + if (err) + return err; + + if (spd == ICE_ETH56G_LNK_SPD_25G && !rs) + val = 0; + else + val = cfg->mktime; + + return ice_write_mac_reg_eth56g(hw, port, PHY_MAC_MARKERTIME, val); +} + +/** + * ice_phy_cfg_intr_eth56g - Configure TX timestamp interrupt + * @hw: pointer to the HW struct + * @port: the timestamp port + * @ena: enable or disable interrupt + * @threshold: interrupt threshold + * + * Configure TX timestamp interrupt for the specified port + * + * Return: + * * %0 - success + * * %other - PHY read/write failed + */ +int ice_phy_cfg_intr_eth56g(struct ice_hw *hw, u8 port, bool ena, u8 threshold) +{ + int err; + u32 val; + + err = ice_read_ptp_reg_eth56g(hw, port, PHY_REG_TS_INT_CONFIG, &val); + if (err) + return err; + + if (ena) { + val |= PHY_TS_INT_CONFIG_ENA_M; + val &= ~PHY_TS_INT_CONFIG_THRESHOLD_M; + val |= FIELD_PREP(PHY_TS_INT_CONFIG_THRESHOLD_M, threshold); + } else { + val &= ~PHY_TS_INT_CONFIG_ENA_M; + } + + return ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TS_INT_CONFIG, val); +} + +/** + * ice_read_phy_and_phc_time_eth56g - Simultaneously capture PHC and PHY time + * @hw: pointer to the HW struct + * @port: the PHY port to read + * @phy_time: on return, the 64bit PHY timer value + * @phc_time: on return, the lower 64bits of PHC time + * + * Issue a ICE_PTP_READ_TIME timer command to simultaneously capture the PHY + * and PHC timer values. + * + * Return: + * * %0 - success + * * %other - PHY read/write failed + */ +static int ice_read_phy_and_phc_time_eth56g(struct ice_hw *hw, u8 port, + u64 *phy_time, u64 *phc_time) +{ + u64 tx_time, rx_time; + u32 zo, lo; + u8 tmr_idx; + int err; + + tmr_idx = ice_get_ptp_src_clock_index(hw); + + /* Prepare the PHC timer for a ICE_PTP_READ_TIME capture command */ + ice_ptp_src_cmd(hw, ICE_PTP_READ_TIME); + + /* Prepare the PHY timer for a ICE_PTP_READ_TIME capture command */ + err = ice_ptp_one_port_cmd(hw, port, ICE_PTP_READ_TIME); + if (err) + return err; + + /* Issue the sync to start the ICE_PTP_READ_TIME capture */ + ice_ptp_exec_tmr_cmd(hw); + + /* Read the captured PHC time from the shadow time registers */ + zo = rd32(hw, GLTSYN_SHTIME_0(tmr_idx)); + lo = rd32(hw, GLTSYN_SHTIME_L(tmr_idx)); + *phc_time = (u64)lo << 32 | zo; + + /* Read the captured PHY time from the PHY shadow registers */ + err = ice_ptp_read_port_capture_eth56g(hw, port, &tx_time, &rx_time); + if (err) + return err; + + /* If the PHY Tx and Rx timers don't match, log a warning message. + * Note that this should not happen in normal circumstances since the + * driver always programs them together. + */ + if (tx_time != rx_time) + dev_warn(ice_hw_to_dev(hw), "PHY port %u Tx and Rx timers do not match, tx_time 0x%016llX, rx_time 0x%016llX\n", + port, tx_time, rx_time); + + *phy_time = tx_time; + + return 0; +} + +/** + * ice_sync_phy_timer_eth56g - Synchronize the PHY timer with PHC timer + * @hw: pointer to the HW struct + * @port: the PHY port to synchronize + * + * Perform an adjustment to ensure that the PHY and PHC timers are in sync. + * This is done by issuing a ICE_PTP_READ_TIME command which triggers a + * simultaneous read of the PHY timer and PHC timer. Then we use the + * difference to calculate an appropriate 2s complement addition to add + * to the PHY timer in order to ensure it reads the same value as the + * primary PHC timer. + * + * Return: + * * %0 - success + * * %-EBUSY- failed to acquire PTP semaphore + * * %other - PHY read/write failed + */ +static int ice_sync_phy_timer_eth56g(struct ice_hw *hw, u8 port) +{ + u64 phc_time, phy_time, difference; + int err; + + if (!ice_ptp_lock(hw)) { + ice_debug(hw, ICE_DBG_PTP, "Failed to acquire PTP semaphore\n"); + return -EBUSY; + } + + err = ice_read_phy_and_phc_time_eth56g(hw, port, &phy_time, &phc_time); + if (err) + goto err_unlock; + + /* Calculate the amount required to add to the port time in order for + * it to match the PHC time. + * + * Note that the port adjustment is done using 2s complement + * arithmetic. This is convenient since it means that we can simply + * calculate the difference between the PHC time and the port time, + * and it will be interpreted correctly. + */ + + ice_ptp_src_cmd(hw, ICE_PTP_NOP); + difference = phc_time - phy_time; + + err = ice_ptp_prep_port_adj_eth56g(hw, port, (s64)difference); + if (err) + goto err_unlock; + + err = ice_ptp_one_port_cmd(hw, port, ICE_PTP_ADJ_TIME); + if (err) + goto err_unlock; + + /* Issue the sync to activate the time adjustment */ + ice_ptp_exec_tmr_cmd(hw); + + /* Re-capture the timer values to flush the command registers and + * verify that the time was properly adjusted. + */ + err = ice_read_phy_and_phc_time_eth56g(hw, port, &phy_time, &phc_time); + if (err) + goto err_unlock; + + dev_info(ice_hw_to_dev(hw), + "Port %u PHY time synced to PHC: 0x%016llX, 0x%016llX\n", + port, phy_time, phc_time); + +err_unlock: + ice_ptp_unlock(hw); + return err; +} + +/** + * ice_stop_phy_timer_eth56g - Stop the PHY clock timer + * @hw: pointer to the HW struct + * @port: the PHY port to stop + * @soft_reset: if true, hold the SOFT_RESET bit of PHY_REG_PS + * + * Stop the clock of a PHY port. This must be done as part of the flow to + * re-calibrate Tx and Rx timestamping offsets whenever the clock time is + * initialized or when link speed changes. + * + * Return: + * * %0 - success + * * %other - failed to write to PHY + */ +int ice_stop_phy_timer_eth56g(struct ice_hw *hw, u8 port, bool soft_reset) +{ + int err; + + err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_OFFSET_READY, 0); + if (err) + return err; + + err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_RX_OFFSET_READY, 0); + if (err) + return err; + + ice_debug(hw, ICE_DBG_PTP, "Disabled clock on PHY port %u\n", port); + + return 0; +} + +/** + * ice_start_phy_timer_eth56g - Start the PHY clock timer + * @hw: pointer to the HW struct + * @port: the PHY port to start + * + * Start the clock of a PHY port. This must be done as part of the flow to + * re-calibrate Tx and Rx timestamping offsets whenever the clock time is + * initialized or when link speed changes. + * + * Return: + * * %0 - success + * * %other - PHY read/write failed + */ +int ice_start_phy_timer_eth56g(struct ice_hw *hw, u8 port) +{ + u32 lo, hi; + u64 incval; + u8 tmr_idx; + int err; + + tmr_idx = ice_get_ptp_src_clock_index(hw); + + err = ice_stop_phy_timer_eth56g(hw, port, false); + if (err) + return err; + + ice_ptp_src_cmd(hw, ICE_PTP_NOP); + + err = ice_phy_cfg_parpcs_eth56g(hw, port); + if (err) + return err; + + err = ice_phy_cfg_ptp_1step_eth56g(hw, port); + if (err) + return err; + + err = ice_phy_cfg_mac_eth56g(hw, port); + if (err) + return err; + + lo = rd32(hw, GLTSYN_INCVAL_L(tmr_idx)); + hi = rd32(hw, GLTSYN_INCVAL_H(tmr_idx)); + incval = (u64)hi << 32 | lo; + + err = ice_write_40b_ptp_reg_eth56g(hw, port, PHY_REG_TIMETUS_L, incval); + if (err) + return err; + + err = ice_ptp_one_port_cmd(hw, port, ICE_PTP_INIT_INCVAL); + if (err) + return err; + + ice_ptp_exec_tmr_cmd(hw); + + err = ice_sync_phy_timer_eth56g(hw, port); + if (err) + return err; + + err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_OFFSET_READY, 1); + if (err) + return err; + + err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_RX_OFFSET_READY, 1); + if (err) + return err; + + ice_debug(hw, ICE_DBG_PTP, "Enabled clock on PHY port %u\n", port); + + return 0; +} + +/** + * ice_sb_access_ena_eth56g - Enable SB devices (PHY and others) access + * @hw: pointer to HW struct + * @enable: Enable or disable access + * + * Enable sideband devices (PHY and others) access. + */ +static void ice_sb_access_ena_eth56g(struct ice_hw *hw, bool enable) +{ + u32 val = rd32(hw, PF_SB_REM_DEV_CTL); + + if (enable) + val |= BIT(eth56g_phy_0) | BIT(cgu) | BIT(eth56g_phy_1); + else + val &= ~(BIT(eth56g_phy_0) | BIT(cgu) | BIT(eth56g_phy_1)); + + wr32(hw, PF_SB_REM_DEV_CTL, val); +} + +/** + * ice_ptp_init_phc_eth56g - Perform E82X specific PHC initialization + * @hw: pointer to HW struct + * + * Perform PHC initialization steps specific to E82X devices. + * + * Return: + * * %0 - success + * * %other - failed to initialize CGU + */ +static int ice_ptp_init_phc_eth56g(struct ice_hw *hw) +{ + ice_sb_access_ena_eth56g(hw, true); + /* Initialize the Clock Generation Unit */ + return ice_init_cgu_e82x(hw); +} + +/** + * ice_ptp_read_tx_hwtstamp_status_eth56g - Get TX timestamp status + * @hw: pointer to the HW struct + * @ts_status: the timestamp mask pointer + * + * Read the PHY Tx timestamp status mask indicating which ports have Tx + * timestamps available. + * + * Return: + * * %0 - success + * * %other - failed to read from PHY + */ +int ice_ptp_read_tx_hwtstamp_status_eth56g(struct ice_hw *hw, u32 *ts_status) +{ + const struct ice_eth56g_params *params = &hw->ptp.phy.eth56g; + u8 phy, mask; + u32 status; + + mask = (1 << hw->ptp.ports_per_phy) - 1; + *ts_status = 0; + + for (phy = 0; phy < params->num_phys; phy++) { + int err; + + err = ice_read_phy_eth56g(hw, phy, PHY_PTP_INT_STATUS, &status); + if (err) + return err; + + *ts_status |= (status & mask) << (phy * hw->ptp.ports_per_phy); + } + + ice_debug(hw, ICE_DBG_PTP, "PHY interrupt err: %x\n", *ts_status); + + return 0; +} + +/** + * ice_get_phy_tx_tstamp_ready_eth56g - Read the Tx memory status register + * @hw: pointer to the HW struct + * @port: the PHY port to read from + * @tstamp_ready: contents of the Tx memory status register + * + * Read the PHY_REG_TX_MEMORY_STATUS register indicating which timestamps in + * the PHY are ready. A set bit means the corresponding timestamp is valid and + * ready to be captured from the PHY timestamp block. + * + * Return: + * * %0 - success + * * %other - failed to read from PHY + */ +static int ice_get_phy_tx_tstamp_ready_eth56g(struct ice_hw *hw, u8 port, + u64 *tstamp_ready) +{ + int err; + + err = ice_read_64b_ptp_reg_eth56g(hw, port, PHY_REG_TX_MEMORY_STATUS_L, + tstamp_ready); + if (err) { + ice_debug(hw, ICE_DBG_PTP, "Failed to read TX_MEMORY_STATUS for port %u, err %d\n", + port, err); + return err; + } + + return 0; +} + +/** + * ice_ptp_init_phy_e825c - initialize PHY parameters + * @hw: pointer to the HW struct + */ +static void ice_ptp_init_phy_e825c(struct ice_hw *hw) +{ + struct ice_ptp_hw *ptp = &hw->ptp; + struct ice_eth56g_params *params; + u8 phy; + + ptp->phy_model = ICE_PHY_ETH56G; + params = &ptp->phy.eth56g; + params->onestep_ena = false; + params->peer_delay = 0; + params->sfd_ena = false; + params->phy_addr[0] = eth56g_phy_0; + params->phy_addr[1] = eth56g_phy_1; + params->num_phys = 2; + ptp->ports_per_phy = 4; + ptp->num_lports = params->num_phys * ptp->ports_per_phy; + + ice_sb_access_ena_eth56g(hw, true); + for (phy = 0; phy < params->num_phys; phy++) { + u32 phy_rev; + int err; + + err = ice_read_phy_eth56g(hw, phy, PHY_REG_REVISION, &phy_rev); + if (err || phy_rev != PHY_REVISION_ETH56G) { + ptp->phy_model = ICE_PHY_UNSUP; + return; + } + } +} + /* E822 family functions * * The following functions operate on the E822 family of devices. @@ -1223,15 +3028,14 @@ static int ice_ptp_set_vernier_wl(struct ice_hw *hw) static int ice_ptp_init_phc_e82x(struct ice_hw *hw) { int err; - u32 regval; + u32 val; /* Enable reading switch and PHY registers over the sideband queue */ #define PF_SB_REM_DEV_CTL_SWITCH_READ BIT(1) #define PF_SB_REM_DEV_CTL_PHY0 BIT(2) - regval = rd32(hw, PF_SB_REM_DEV_CTL); - regval |= (PF_SB_REM_DEV_CTL_SWITCH_READ | - PF_SB_REM_DEV_CTL_PHY0); - wr32(hw, PF_SB_REM_DEV_CTL, regval); + val = rd32(hw, PF_SB_REM_DEV_CTL); + val |= (PF_SB_REM_DEV_CTL_SWITCH_READ | PF_SB_REM_DEV_CTL_PHY0); + wr32(hw, PF_SB_REM_DEV_CTL, val); /* Initialize the Clock Generation Unit */ err = ice_init_cgu_e82x(hw); @@ -1458,51 +3262,20 @@ ice_ptp_read_port_capture(struct ice_hw *hw, u8 port, u64 *tx_ts, u64 *rx_ts) * * Prepare the requested port for an upcoming timer sync command. * - * Do not use this function directly. If you want to configure exactly one - * port, use ice_ptp_one_port_cmd() instead. + * Note there is no equivalent of this operation on E810, as that device + * always handles all external PHYs internally. + * + * Return: + * * %0 - success + * * %other - failed to write to PHY */ static int ice_ptp_write_port_cmd_e82x(struct ice_hw *hw, u8 port, enum ice_ptp_tmr_cmd cmd) { - u32 cmd_val, val; - u8 tmr_idx; + u32 val = ice_ptp_tmr_cmd_to_port_reg(hw, cmd); int err; - tmr_idx = ice_get_ptp_src_clock_index(hw); - cmd_val = tmr_idx << SEL_PHY_SRC; - switch (cmd) { - case ICE_PTP_INIT_TIME: - cmd_val |= PHY_CMD_INIT_TIME; - break; - case ICE_PTP_INIT_INCVAL: - cmd_val |= PHY_CMD_INIT_INCVAL; - break; - case ICE_PTP_ADJ_TIME: - cmd_val |= PHY_CMD_ADJ_TIME; - break; - case ICE_PTP_READ_TIME: - cmd_val |= PHY_CMD_READ_TIME; - break; - case ICE_PTP_ADJ_TIME_AT_TIME: - cmd_val |= PHY_CMD_ADJ_TIME_AT_TIME; - break; - case ICE_PTP_NOP: - break; - } - /* Tx case */ - /* Read, modify, write */ - err = ice_read_phy_reg_e82x(hw, port, P_REG_TX_TMR_CMD, &val); - if (err) { - ice_debug(hw, ICE_DBG_PTP, "Failed to read TX_TMR_CMD, err %d\n", - err); - return err; - } - - /* Modify necessary bits only and perform write */ - val &= ~TS_CMD_MASK; - val |= cmd_val; - err = ice_write_phy_reg_e82x(hw, port, P_REG_TX_TMR_CMD, val); if (err) { ice_debug(hw, ICE_DBG_PTP, "Failed to write back TX_TMR_CMD, err %d\n", @@ -1511,19 +3284,8 @@ static int ice_ptp_write_port_cmd_e82x(struct ice_hw *hw, u8 port, } /* Rx case */ - /* Read, modify, write */ - err = ice_read_phy_reg_e82x(hw, port, P_REG_RX_TMR_CMD, &val); - if (err) { - ice_debug(hw, ICE_DBG_PTP, "Failed to read RX_TMR_CMD, err %d\n", - err); - return err; - } - - /* Modify necessary bits only and perform write */ - val &= ~TS_CMD_MASK; - val |= cmd_val; - - err = ice_write_phy_reg_e82x(hw, port, P_REG_RX_TMR_CMD, val); + err = ice_write_phy_reg_e82x(hw, port, P_REG_RX_TMR_CMD, + val | TS_CMD_RX_TYPE); if (err) { ice_debug(hw, ICE_DBG_PTP, "Failed to write back RX_TMR_CMD, err %d\n", err); @@ -1533,63 +3295,6 @@ static int ice_ptp_write_port_cmd_e82x(struct ice_hw *hw, u8 port, return 0; } -/** - * ice_ptp_one_port_cmd - Prepare one port for a timer command - * @hw: pointer to the HW struct - * @configured_port: the port to configure with configured_cmd - * @configured_cmd: timer command to prepare on the configured_port - * - * Prepare the configured_port for the configured_cmd, and prepare all other - * ports for ICE_PTP_NOP. This causes the configured_port to execute the - * desired command while all other ports perform no operation. - */ -static int -ice_ptp_one_port_cmd(struct ice_hw *hw, u8 configured_port, - enum ice_ptp_tmr_cmd configured_cmd) -{ - u8 port; - - for (port = 0; port < hw->ptp.num_lports; port++) { - enum ice_ptp_tmr_cmd cmd; - int err; - - if (port == configured_port) - cmd = configured_cmd; - else - cmd = ICE_PTP_NOP; - - err = ice_ptp_write_port_cmd_e82x(hw, port, cmd); - if (err) - return err; - } - - return 0; -} - -/** - * ice_ptp_port_cmd_e82x - Prepare all ports for a timer command - * @hw: pointer to the HW struct - * @cmd: timer command to prepare - * - * Prepare all ports connected to this device for an upcoming timer sync - * command. - */ -static int -ice_ptp_port_cmd_e82x(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd) -{ - u8 port; - - for (port = 0; port < hw->ptp.num_lports; port++) { - int err; - - err = ice_ptp_write_port_cmd_e82x(hw, port, cmd); - if (err) - return err; - } - - return 0; -} - /* E822 Vernier calibration functions * * The following functions are used as part of the vernier calibration of @@ -3437,10 +5142,114 @@ void ice_ptp_init_hw(struct ice_hw *hw) ice_ptp_init_phy_e82x(ptp); else if (ice_is_e810(hw)) ice_ptp_init_phy_e810(ptp); + else if (ice_is_e825c(hw)) + ice_ptp_init_phy_e825c(hw); else ptp->phy_model = ICE_PHY_UNSUP; } +/** + * ice_ptp_write_port_cmd - Prepare a single PHY port for a timer command + * @hw: pointer to HW struct + * @port: Port to which cmd has to be sent + * @cmd: Command to be sent to the port + * + * Prepare one port for the upcoming timer sync command. Do not use this for + * programming only a single port, instead use ice_ptp_one_port_cmd() to + * ensure non-modified ports get properly initialized to ICE_PTP_NOP. + * + * Return: + * * %0 - success + * %-EBUSY - PHY type not supported + * * %other - failed to write port command + */ +static int ice_ptp_write_port_cmd(struct ice_hw *hw, u8 port, + enum ice_ptp_tmr_cmd cmd) +{ + switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + return ice_ptp_write_port_cmd_eth56g(hw, port, cmd); + case ICE_PHY_E82X: + return ice_ptp_write_port_cmd_e82x(hw, port, cmd); + default: + return -EOPNOTSUPP; + } +} + +/** + * ice_ptp_one_port_cmd - Program one PHY port for a timer command + * @hw: pointer to HW struct + * @configured_port: the port that should execute the command + * @configured_cmd: the command to be executed on the configured port + * + * Prepare one port for executing a timer command, while preparing all other + * ports to ICE_PTP_NOP. This allows executing a command on a single port + * while ensuring all other ports do not execute stale commands. + * + * Return: + * * %0 - success + * * %other - failed to write port command + */ +int ice_ptp_one_port_cmd(struct ice_hw *hw, u8 configured_port, + enum ice_ptp_tmr_cmd configured_cmd) +{ + u32 port; + + for (port = 0; port < hw->ptp.num_lports; port++) { + int err; + + /* Program the configured port with the configured command, + * program all other ports with ICE_PTP_NOP. + */ + if (port == configured_port) + err = ice_ptp_write_port_cmd(hw, port, configured_cmd); + else + err = ice_ptp_write_port_cmd(hw, port, ICE_PTP_NOP); + + if (err) + return err; + } + + return 0; +} + +/** + * ice_ptp_port_cmd - Prepare PHY ports for a timer sync command + * @hw: pointer to HW struct + * @cmd: the timer command to setup + * + * Prepare all PHY ports on this device for the requested timer command. For + * some families this can be done in one shot, but for other families each + * port must be configured individually. + * + * Return: + * * %0 - success + * * %other - failed to write port command + */ +static int ice_ptp_port_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd) +{ + u32 port; + + /* PHY models which can program all ports simultaneously */ + switch (hw->ptp.phy_model) { + case ICE_PHY_E810: + return ice_ptp_port_cmd_e810(hw, cmd); + default: + break; + } + + /* PHY models which require programming each port separately */ + for (port = 0; port < hw->ptp.num_lports; port++) { + int err; + + err = ice_ptp_write_port_cmd(hw, port, cmd); + if (err) + return err; + } + + return 0; +} + /** * ice_ptp_tmr_cmd - Prepare and trigger a timer sync command * @hw: pointer to HW struct @@ -3459,17 +5268,7 @@ static int ice_ptp_tmr_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd) ice_ptp_src_cmd(hw, cmd); /* Next, prepare the ports */ - switch (hw->ptp.phy_model) { - case ICE_PHY_E810: - err = ice_ptp_port_cmd_e810(hw, cmd); - break; - case ICE_PHY_E82X: - err = ice_ptp_port_cmd_e82x(hw, cmd); - break; - default: - err = -EOPNOTSUPP; - } - + err = ice_ptp_port_cmd(hw, cmd); if (err) { ice_debug(hw, ICE_DBG_PTP, "Failed to prepare PHY ports for timer command %u, err %d\n", cmd, err); @@ -3512,6 +5311,10 @@ int ice_ptp_init_time(struct ice_hw *hw, u64 time) /* PHY timers */ /* Fill Rx and Tx ports and send msg to PHY */ switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + err = ice_ptp_prep_phy_time_eth56g(hw, + (u32)(time & 0xFFFFFFFF)); + break; case ICE_PHY_E810: err = ice_ptp_prep_phy_time_e810(hw, time & 0xFFFFFFFF); break; @@ -3554,6 +5357,9 @@ int ice_ptp_write_incval(struct ice_hw *hw, u64 incval) wr32(hw, GLTSYN_SHADJ_H(tmr_idx), upper_32_bits(incval)); switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + err = ice_ptp_prep_phy_incval_eth56g(hw, incval); + break; case ICE_PHY_E810: err = ice_ptp_prep_phy_incval_e810(hw, incval); break; @@ -3620,6 +5426,9 @@ int ice_ptp_adj_clock(struct ice_hw *hw, s32 adj) wr32(hw, GLTSYN_SHADJ_H(tmr_idx), adj); switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + err = ice_ptp_prep_phy_adj_eth56g(hw, adj); + break; case ICE_PHY_E810: err = ice_ptp_prep_phy_adj_e810(hw, adj); break; @@ -3650,6 +5459,8 @@ int ice_ptp_adj_clock(struct ice_hw *hw, s32 adj) int ice_read_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx, u64 *tstamp) { switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + return ice_read_ptp_tstamp_eth56g(hw, block, idx, tstamp); case ICE_PHY_E810: return ice_read_phy_tstamp_e810(hw, block, idx, tstamp); case ICE_PHY_E82X: @@ -3678,6 +5489,8 @@ int ice_read_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx, u64 *tstamp) int ice_clear_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx) { switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + return ice_clear_ptp_tstamp_eth56g(hw, block, idx); case ICE_PHY_E810: return ice_clear_phy_tstamp_e810(hw, block, idx); case ICE_PHY_E82X: @@ -3739,6 +5552,9 @@ static int ice_get_pf_c827_idx(struct ice_hw *hw, u8 *idx) void ice_ptp_reset_ts_memory(struct ice_hw *hw) { switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + ice_ptp_reset_ts_memory_eth56g(hw); + break; case ICE_PHY_E82X: ice_ptp_reset_ts_memory_e82x(hw); break; @@ -3765,6 +5581,8 @@ int ice_ptp_init_phc(struct ice_hw *hw) (void)rd32(hw, GLTSYN_STAT(src_idx)); switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + return ice_ptp_init_phc_eth56g(hw); case ICE_PHY_E810: return ice_ptp_init_phc_e810(hw); case ICE_PHY_E82X: @@ -3788,6 +5606,9 @@ int ice_ptp_init_phc(struct ice_hw *hw) int ice_get_phy_tx_tstamp_ready(struct ice_hw *hw, u8 block, u64 *tstamp_ready) { switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + return ice_get_phy_tx_tstamp_ready_eth56g(hw, block, + tstamp_ready); case ICE_PHY_E810: return ice_get_phy_tx_tstamp_ready_e810(hw, block, tstamp_ready); diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h index 3fe12a1694fc..184573509e62 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h +++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h @@ -41,6 +41,41 @@ enum ice_ptp_fec_mode { ICE_PTP_FEC_MODE_RS_FEC }; +enum eth56g_res_type { + ETH56G_PHY_REG_PTP, + ETH56G_PHY_MEM_PTP, + ETH56G_PHY_REG_XPCS, + ETH56G_PHY_REG_MAC, + ETH56G_PHY_REG_GPCS, + NUM_ETH56G_PHY_RES +}; + +enum ice_eth56g_link_spd { + ICE_ETH56G_LNK_SPD_1G, + ICE_ETH56G_LNK_SPD_2_5G, + ICE_ETH56G_LNK_SPD_10G, + ICE_ETH56G_LNK_SPD_25G, + ICE_ETH56G_LNK_SPD_40G, + ICE_ETH56G_LNK_SPD_50G, + ICE_ETH56G_LNK_SPD_50G2, + ICE_ETH56G_LNK_SPD_100G, + ICE_ETH56G_LNK_SPD_100G2, + NUM_ICE_ETH56G_LNK_SPD /* Must be last */ +}; + +/** + * struct ice_phy_reg_info_eth56g - ETH56G PHY register parameters + * @base: base address for each PHY block + * @step: step between PHY lanes + * + * Characteristic information for the various PHY register parameters in the + * ETH56G devices + */ +struct ice_phy_reg_info_eth56g { + u32 base[NUM_ETH56G_PHY_RES]; + u32 step; +}; + /** * struct ice_time_ref_info_e82x * @pll_freq: Frequency of PLL that drives timer ticks in Hz @@ -94,6 +129,73 @@ struct ice_vernier_info_e82x { u32 rx_fixed_delay; }; +#define ICE_ETH56G_MAC_CFG_RX_OFFSET_INT GENMASK(19, 9) +#define ICE_ETH56G_MAC_CFG_RX_OFFSET_FRAC GENMASK(8, 0) +#define ICE_ETH56G_MAC_CFG_FRAC_W 9 +/** + * struct ice_eth56g_mac_reg_cfg - MAC config values for specific PTP registers + * @tx_mode: Tx timestamp compensation mode + * @tx_mk_dly: Tx timestamp marker start strobe delay + * @tx_cw_dly: Tx timestamp codeword start strobe delay + * @rx_mode: Rx timestamp compensation mode + * @rx_mk_dly: Rx timestamp marker start strobe delay + * @rx_cw_dly: Rx timestamp codeword start strobe delay + * @blks_per_clk: number of blocks transferred per clock cycle + * @blktime: block time, fixed point + * @mktime: marker time, fixed point + * @tx_offset: total Tx offset, fixed point + * @rx_offset: total Rx offset, contains value for bitslip/deskew, fixed point + * + * All fixed point registers except Rx offset are 23 bit unsigned ints with + * a 9 bit fractional. + * Rx offset is 11 bit unsigned int with a 9 bit fractional. + */ +struct ice_eth56g_mac_reg_cfg { + struct { + u8 def; + u8 rs; + } tx_mode; + u8 tx_mk_dly; + struct { + u8 def; + u8 onestep; + } tx_cw_dly; + struct { + u8 def; + u8 rs; + } rx_mode; + struct { + u8 def; + u8 rs; + } rx_mk_dly; + struct { + u8 def; + u8 rs; + } rx_cw_dly; + u8 blks_per_clk; + u16 blktime; + u16 mktime; + struct { + u32 serdes; + u32 no_fec; + u32 fc; + u32 rs; + u32 sfd; + u32 onestep; + } tx_offset; + struct { + u32 serdes; + u32 no_fec; + u32 fc; + u32 rs; + u32 sfd; + u32 bs_ds; + } rx_offset; +}; + +extern +const struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD]; + /** * struct ice_cgu_pll_params_e82x * @refclk_pre_div: Reference clock pre-divisor @@ -188,6 +290,9 @@ ice_cgu_pll_params_e82x e822_cgu_params[NUM_ICE_TIME_REF_FREQ]; #define E810C_QSFP_C827_0_HANDLE 2 #define E810C_QSFP_C827_1_HANDLE 3 +/* Table of constants related to possible ETH56G PHY resources */ +extern const struct ice_phy_reg_info_eth56g eth56g_phy_res[NUM_ETH56G_PHY_RES]; + /* Table of constants related to possible TIME_REF sources */ extern const struct ice_time_ref_info_e82x e822_time_ref[NUM_ICE_TIME_REF_FREQ]; @@ -197,7 +302,9 @@ extern const struct ice_vernier_info_e82x e822_vernier[NUM_ICE_PTP_LNK_SPD]; /* Increment value to generate nanoseconds in the GLTSYN_TIME_L register for * the E810 devices. Based off of a PLL with an 812.5 MHz frequency. */ -#define ICE_PTP_NOMINAL_INCVAL_E810 0x13b13b13bULL +#define ICE_E810_PLL_FREQ 812500000 +#define ICE_PTP_NOMINAL_INCVAL_E810 0x13b13b13bULL +#define E810_OUT_PROP_DELAY_NS 1 /* Device agnostic functions */ u8 ice_get_ptp_src_clock_index(struct ice_hw *hw); @@ -215,6 +322,8 @@ void ice_ptp_reset_ts_memory(struct ice_hw *hw); int ice_ptp_init_phc(struct ice_hw *hw); void ice_ptp_init_hw(struct ice_hw *hw); int ice_get_phy_tx_tstamp_ready(struct ice_hw *hw, u8 block, u64 *tstamp_ready); +int ice_ptp_one_port_cmd(struct ice_hw *hw, u8 configured_port, + enum ice_ptp_tmr_cmd configured_cmd); /* E822 family functions */ int ice_read_quad_reg_e82x(struct ice_hw *hw, u8 quad, u16 offset, u32 *val); @@ -285,6 +394,21 @@ int ice_get_cgu_rclk_pin_info(struct ice_hw *hw, u8 *base_idx, u8 *pin_num); int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id, unsigned long *caps); +/* ETH56G family functions */ +int ice_ptp_read_tx_hwtstamp_status_eth56g(struct ice_hw *hw, u32 *ts_status); +int ice_stop_phy_timer_eth56g(struct ice_hw *hw, u8 port, bool soft_reset); +int ice_start_phy_timer_eth56g(struct ice_hw *hw, u8 port); +int ice_phy_cfg_tx_offset_eth56g(struct ice_hw *hw, u8 port); +int ice_phy_cfg_rx_offset_eth56g(struct ice_hw *hw, u8 port); +int ice_phy_cfg_intr_eth56g(struct ice_hw *hw, u8 port, bool ena, u8 threshold); +int ice_phy_cfg_ptp_1step_eth56g(struct ice_hw *hw, u8 port); + +#define ICE_ETH56G_NOMINAL_INCVAL 0x140000000ULL +#define ICE_ETH56G_NOMINAL_PCS_REF_TUS 0x100000000ULL +#define ICE_ETH56G_NOMINAL_PCS_REF_INC 0x300000000ULL +#define ICE_ETH56G_NOMINAL_THRESH4 0x7777 +#define ICE_ETH56G_NOMINAL_TX_THRESH 0x6 + /** * ice_get_base_incval - Get base clock increment value * @hw: pointer to the HW struct @@ -294,6 +418,8 @@ int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id, static inline u64 ice_get_base_incval(struct ice_hw *hw) { switch (hw->ptp.phy_model) { + case ICE_PHY_ETH56G: + return ICE_ETH56G_NOMINAL_INCVAL; case ICE_PHY_E810: return ICE_PTP_NOMINAL_INCVAL_E810; case ICE_PHY_E82X: @@ -330,6 +456,7 @@ static inline u64 ice_get_base_incval(struct ice_hw *hw) #define TS_CMD_MASK_E810 0xFF #define TS_CMD_MASK 0xF #define SYNC_EXEC_CMD 0x3 +#define TS_CMD_RX_TYPE ICE_M(0x18, 0x4) /* Macros to derive port low and high addresses on both quads */ #define P_Q0_L(a, p) ((((a) + (0x2000 * (p)))) & 0xFFFF) @@ -564,4 +691,115 @@ static inline u64 ice_get_base_incval(struct ice_hw *hw) /* E810T PCA9575 IO controller pin control */ #define ICE_E810T_P0_GNSS_PRSNT_N BIT(4) +/* ETH56G PHY register addresses */ +/* Timestamp PHY incval registers */ +#define PHY_REG_TIMETUS_L 0x8 +#define PHY_REG_TIMETUS_U 0xC + +/* Timestamp PCS registers */ +#define PHY_PCS_REF_TUS_L 0x18 +#define PHY_PCS_REF_TUS_U 0x1C + +/* Timestamp PCS ref incval registers */ +#define PHY_PCS_REF_INC_L 0x20 +#define PHY_PCS_REF_INC_U 0x24 + +/* Timestamp init registers */ +#define PHY_REG_RX_TIMER_INC_PRE_L 0x64 +#define PHY_REG_RX_TIMER_INC_PRE_U 0x68 +#define PHY_REG_TX_TIMER_INC_PRE_L 0x44 +#define PHY_REG_TX_TIMER_INC_PRE_U 0x48 + +/* Timestamp match and adjust target registers */ +#define PHY_REG_RX_TIMER_CNT_ADJ_L 0x6C +#define PHY_REG_RX_TIMER_CNT_ADJ_U 0x70 +#define PHY_REG_TX_TIMER_CNT_ADJ_L 0x4C +#define PHY_REG_TX_TIMER_CNT_ADJ_U 0x50 + +/* Timestamp command registers */ +#define PHY_REG_TX_TMR_CMD 0x40 +#define PHY_REG_RX_TMR_CMD 0x60 + +/* Phy offset ready registers */ +#define PHY_REG_TX_OFFSET_READY 0x54 +#define PHY_REG_RX_OFFSET_READY 0x74 + +/* Phy total offset registers */ +#define PHY_REG_TOTAL_TX_OFFSET_L 0x38 +#define PHY_REG_TOTAL_TX_OFFSET_U 0x3C +#define PHY_REG_TOTAL_RX_OFFSET_L 0x58 +#define PHY_REG_TOTAL_RX_OFFSET_U 0x5C + +/* Timestamp capture registers */ +#define PHY_REG_TX_CAPTURE_L 0x78 +#define PHY_REG_TX_CAPTURE_U 0x7C +#define PHY_REG_RX_CAPTURE_L 0x8C +#define PHY_REG_RX_CAPTURE_U 0x90 + +/* Memory status registers */ +#define PHY_REG_TX_MEMORY_STATUS_L 0x80 +#define PHY_REG_TX_MEMORY_STATUS_U 0x84 + +/* Interrupt config register */ +#define PHY_REG_TS_INT_CONFIG 0x88 + +/* XIF mode config register */ +#define PHY_MAC_XIF_MODE 0x24 +#define PHY_MAC_XIF_1STEP_ENA_M ICE_M(0x1, 5) +#define PHY_MAC_XIF_TS_BIN_MODE_M ICE_M(0x1, 11) +#define PHY_MAC_XIF_TS_SFD_ENA_M ICE_M(0x1, 20) +#define PHY_MAC_XIF_GMII_TS_SEL_M ICE_M(0x1, 21) + +/* GPCS config register */ +#define PHY_GPCS_CONFIG_REG0 0x268 +#define PHY_GPCS_CONFIG_REG0_TX_THR_M ICE_M(0xF, 24) +#define PHY_GPCS_BITSLIP 0x5C + +#define PHY_TS_INT_CONFIG_THRESHOLD_M ICE_M(0x3F, 0) +#define PHY_TS_INT_CONFIG_ENA_M BIT(6) + +/* 1-step PTP config */ +#define PHY_PTP_1STEP_CONFIG 0x270 +#define PHY_PTP_1STEP_T1S_UP64_M ICE_M(0xF, 4) +#define PHY_PTP_1STEP_T1S_DELTA_M ICE_M(0xF, 8) +#define PHY_PTP_1STEP_PEER_DELAY(_port) (0x274 + 4 * (_port)) +#define PHY_PTP_1STEP_PD_ADD_PD_M ICE_M(0x1, 0) +#define PHY_PTP_1STEP_PD_DELAY_M ICE_M(0x3fffffff, 1) +#define PHY_PTP_1STEP_PD_DLY_V_M ICE_M(0x1, 31) + +/* Macros to derive offsets for TimeStampLow and TimeStampHigh */ +#define PHY_TSTAMP_L(x) (((x) * 8) + 0) +#define PHY_TSTAMP_U(x) (((x) * 8) + 4) + +#define PHY_REG_REVISION 0x85000 + +#define PHY_REG_DESKEW_0 0x94 +#define PHY_REG_DESKEW_0_RLEVEL GENMASK(6, 0) +#define PHY_REG_DESKEW_0_RLEVEL_FRAC GENMASK(9, 7) +#define PHY_REG_DESKEW_0_RLEVEL_FRAC_W 3 +#define PHY_REG_DESKEW_0_VALID GENMASK(10, 10) + +#define PHY_REG_GPCS_BITSLIP 0x5C +#define PHY_REG_SD_BIT_SLIP(_port_offset) (0x29C + 4 * (_port_offset)) +#define PHY_REVISION_ETH56G 0x10200 +#define PHY_VENDOR_TXLANE_THRESH 0x2000C + +#define PHY_MAC_TSU_CONFIG 0x40 +#define PHY_MAC_TSU_CFG_RX_MODE_M ICE_M(0x7, 0) +#define PHY_MAC_TSU_CFG_RX_MII_CW_DLY_M ICE_M(0x7, 4) +#define PHY_MAC_TSU_CFG_RX_MII_MK_DLY_M ICE_M(0x7, 8) +#define PHY_MAC_TSU_CFG_TX_MODE_M ICE_M(0x7, 12) +#define PHY_MAC_TSU_CFG_TX_MII_CW_DLY_M ICE_M(0x1F, 16) +#define PHY_MAC_TSU_CFG_TX_MII_MK_DLY_M ICE_M(0x1F, 21) +#define PHY_MAC_TSU_CFG_BLKS_PER_CLK_M ICE_M(0x1, 28) +#define PHY_MAC_RX_MODULO 0x44 +#define PHY_MAC_RX_OFFSET 0x48 +#define PHY_MAC_RX_OFFSET_M ICE_M(0xFFFFFF, 0) +#define PHY_MAC_TX_MODULO 0x4C +#define PHY_MAC_BLOCKTIME 0x50 +#define PHY_MAC_MARKERTIME 0x54 +#define PHY_MAC_TX_OFFSET 0x58 + +#define PHY_PTP_INT_STATUS 0x7FD140 + #endif /* _ICE_PTP_HW_H_ */ diff --git a/drivers/net/ethernet/intel/ice/ice_sbq_cmd.h b/drivers/net/ethernet/intel/ice/ice_sbq_cmd.h index ead75fe2bcda..3b0054faf70c 100644 --- a/drivers/net/ethernet/intel/ice/ice_sbq_cmd.h +++ b/drivers/net/ethernet/intel/ice/ice_sbq_cmd.h @@ -47,10 +47,12 @@ struct ice_sbq_evt_desc { }; enum ice_sbq_msg_dev { - rmn_0 = 0x02, - rmn_1 = 0x03, - rmn_2 = 0x04, - cgu = 0x06 + eth56g_phy_0 = 0x02, + rmn_0 = 0x02, + rmn_1 = 0x03, + rmn_2 = 0x04, + cgu = 0x06, + eth56g_phy_1 = 0x0D, }; enum ice_sbq_msg_opcode { diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h index 627c44dc86ca..e09a0b8c5112 100644 --- a/drivers/net/ethernet/intel/ice/ice_type.h +++ b/drivers/net/ethernet/intel/ice/ice_type.h @@ -321,7 +321,9 @@ enum ice_time_ref_freq { ICE_TIME_REF_FREQ_156_250 = 4, ICE_TIME_REF_FREQ_245_760 = 5, - NUM_ICE_TIME_REF_FREQ + NUM_ICE_TIME_REF_FREQ, + + ICE_TIME_REF_FREQ_INVALID = -1, }; /* Clock source specification */ @@ -820,15 +822,29 @@ struct ice_mbx_data { #define ICE_PORTS_PER_QUAD 4 #define ICE_GET_QUAD_NUM(port) ((port) / ICE_PORTS_PER_QUAD) +struct ice_eth56g_params { + u8 num_phys; + u8 phy_addr[2]; + bool onestep_ena; + bool sfd_ena; + u32 peer_delay; +}; + +union ice_phy_params { + struct ice_eth56g_params eth56g; +}; + /* PHY model */ enum ice_phy_model { ICE_PHY_UNSUP = -1, - ICE_PHY_E810 = 1, + ICE_PHY_E810 = 1, ICE_PHY_E82X, + ICE_PHY_ETH56G, }; struct ice_ptp_hw { enum ice_phy_model phy_model; + union ice_phy_params phy; u8 num_lports; u8 ports_per_phy; };