@@ -231,19 +231,16 @@ static int stm32mp1_configure_pmcr(struct plat_stmmacenet_data *plat_dat)
switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_MII:
val = SYSCFG_PMCR_ETH_SEL_MII;
- pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
break;
case PHY_INTERFACE_MODE_GMII:
val = SYSCFG_PMCR_ETH_SEL_GMII;
if (dwmac->enable_eth_ck)
val |= SYSCFG_PMCR_ETH_CLK_SEL;
- pr_debug("SYSCFG init : PHY_INTERFACE_MODE_GMII\n");
break;
case PHY_INTERFACE_MODE_RMII:
val = SYSCFG_PMCR_ETH_SEL_RMII;
if (dwmac->enable_eth_ck)
val |= SYSCFG_PMCR_ETH_REF_CLK_SEL;
- pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RMII\n");
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
@@ -252,15 +249,16 @@ static int stm32mp1_configure_pmcr(struct plat_stmmacenet_data *plat_dat)
val = SYSCFG_PMCR_ETH_SEL_RGMII;
if (dwmac->enable_eth_ck)
val |= SYSCFG_PMCR_ETH_CLK_SEL;
- pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RGMII\n");
break;
default:
- pr_debug("SYSCFG init : Do not manage %d interface\n",
- plat_dat->mac_interface);
+ dev_err(dwmac->dev, "Mode %s not supported",
+ phy_modes(plat_dat->mac_interface));
/* Do not manage others interfaces */
return -EINVAL;
}
+ dev_dbg(dwmac->dev, "Mode %s", phy_modes(plat_dat->mac_interface));
+
/* Need to update PMCCLRR (clear register) */
regmap_write(dwmac->regmap, reg + SYSCFG_PMCCLRR_OFFSET,
dwmac->ops->syscfg_eth_mask);
@@ -294,19 +292,19 @@ static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_MII:
val = SYSCFG_MCU_ETH_SEL_MII;
- pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
break;
case PHY_INTERFACE_MODE_RMII:
val = SYSCFG_MCU_ETH_SEL_RMII;
- pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RMII\n");
break;
default:
- pr_debug("SYSCFG init : Do not manage %d interface\n",
- plat_dat->mac_interface);
+ dev_err(dwmac->dev, "Mode %s not supported",
+ phy_modes(plat_dat->mac_interface));
/* Do not manage others interfaces */
return -EINVAL;
}
+ dev_dbg(dwmac->dev, "Mode %s", phy_modes(plat_dat->mac_interface));
+
return regmap_update_bits(dwmac->regmap, reg,
dwmac->ops->syscfg_eth_mask, val << 23);
}
Use dev_err()/dev_dbg() and phy_modes() to print PHY mode instead of pr_debug() and hand-written PHY mode decoding. This way, each debug print has associated device with it and duplicated mode decoding is removed. Signed-off-by: Marek Vasut <marex@denx.de> --- Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Christophe Roullier <christophe.roullier@foss.st.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jose Abreu <joabreu@synopsys.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: netdev@vger.kernel.org --- .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-)