Message ID | 20240429102519.25096-5-jiawenwu@trustnetic.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | Wangxun fixes | expand |
On Mon, Apr 29, 2024 at 06:25:19PM +0800, Jiawen Wu wrote: > When VLAN tag strip is changed to enable or disable, the hardware requires > the Rx ring to be in a disabled state, otherwise the feature cannot be > changed. > > Fixes: f3b03c655f67 ("net: wangxun: Implement vlan add and kill functions") > Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> > --- > drivers/net/ethernet/wangxun/libwx/wx_hw.c | 2 ++ > drivers/net/ethernet/wangxun/libwx/wx_lib.c | 6 ++-- > drivers/net/ethernet/wangxun/libwx/wx_type.h | 22 ++++++++++++++ > .../net/ethernet/wangxun/ngbe/ngbe_ethtool.c | 18 +++++++---- > .../ethernet/wangxun/txgbe/txgbe_ethtool.c | 18 +++++++---- > .../net/ethernet/wangxun/txgbe/txgbe_main.c | 30 +++++++++++++++++++ > .../net/ethernet/wangxun/txgbe/txgbe_type.h | 1 + > 7 files changed, 84 insertions(+), 13 deletions(-) > > diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c > index 945c13d1a982..c09a6f744575 100644 > --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c > +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c > @@ -1958,6 +1958,8 @@ int wx_sw_init(struct wx *wx) > return -ENOMEM; > } > > + bitmap_zero(wx->state, WX_STATE_NBITS); > + > return 0; > } > EXPORT_SYMBOL(wx_sw_init); > diff --git a/drivers/net/ethernet/wangxun/libwx/wx_lib.c b/drivers/net/ethernet/wangxun/libwx/wx_lib.c > index aefd78455468..ed6a168ff136 100644 > --- a/drivers/net/ethernet/wangxun/libwx/wx_lib.c > +++ b/drivers/net/ethernet/wangxun/libwx/wx_lib.c > @@ -2692,9 +2692,9 @@ int wx_set_features(struct net_device *netdev, netdev_features_t features) > > netdev->features = features; > > - if (changed & > - (NETIF_F_HW_VLAN_CTAG_RX | > - NETIF_F_HW_VLAN_STAG_RX)) > + if (wx->mac.type == wx_mac_sp && changed & NETIF_F_HW_VLAN_CTAG_RX) > + wx->do_reset(netdev); > + else if (changed & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER)) > wx_set_rx_mode(netdev); > > return 0; Hi Jiawen Wu, NETIF_F_HW_VLAN_CTAG_RX appears in both the "if" and "if else" condition. Should "if else" be changed to "if" ? ...
> > diff --git a/drivers/net/ethernet/wangxun/libwx/wx_lib.c b/drivers/net/ethernet/wangxun/libwx/wx_lib.c > > index aefd78455468..ed6a168ff136 100644 > > --- a/drivers/net/ethernet/wangxun/libwx/wx_lib.c > > +++ b/drivers/net/ethernet/wangxun/libwx/wx_lib.c > > @@ -2692,9 +2692,9 @@ int wx_set_features(struct net_device *netdev, netdev_features_t features) > > > > netdev->features = features; > > > > - if (changed & > > - (NETIF_F_HW_VLAN_CTAG_RX | > > - NETIF_F_HW_VLAN_STAG_RX)) > > + if (wx->mac.type == wx_mac_sp && changed & NETIF_F_HW_VLAN_CTAG_RX) > > + wx->do_reset(netdev); > > + else if (changed & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER)) > > wx_set_rx_mode(netdev); > > > > return 0; > > Hi Jiawen Wu, > > NETIF_F_HW_VLAN_CTAG_RX appears in both the "if" and "if else" condition. > Should "if else" be changed to "if" ? There are 4 cases where wx_set_rx_mode() is called, CTAG_RX and CTAG_FILTER combined with wx_mac_sp and wx_mac_em. But only one special case that changing CTAG_RX requires wx_mac_sp device to do reset, and wx_set_rx_mode() also will be called during the reset process. So I think "if else" is more appropriate here.
On Thu, May 09, 2024 at 11:08:46AM +0800, Jiawen Wu wrote: > > > diff --git a/drivers/net/ethernet/wangxun/libwx/wx_lib.c b/drivers/net/ethernet/wangxun/libwx/wx_lib.c > > > index aefd78455468..ed6a168ff136 100644 > > > --- a/drivers/net/ethernet/wangxun/libwx/wx_lib.c > > > +++ b/drivers/net/ethernet/wangxun/libwx/wx_lib.c > > > @@ -2692,9 +2692,9 @@ int wx_set_features(struct net_device *netdev, netdev_features_t features) > > > > > > netdev->features = features; > > > > > > - if (changed & > > > - (NETIF_F_HW_VLAN_CTAG_RX | > > > - NETIF_F_HW_VLAN_STAG_RX)) > > > + if (wx->mac.type == wx_mac_sp && changed & NETIF_F_HW_VLAN_CTAG_RX) > > > + wx->do_reset(netdev); > > > + else if (changed & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER)) > > > wx_set_rx_mode(netdev); > > > > > > return 0; > > > > Hi Jiawen Wu, > > > > NETIF_F_HW_VLAN_CTAG_RX appears in both the "if" and "if else" condition. > > Should "if else" be changed to "if" ? > > There are 4 cases where wx_set_rx_mode() is called, CTAG_RX and CTAG_FILTER > combined with wx_mac_sp and wx_mac_em. But only one special case that > changing CTAG_RX requires wx_mac_sp device to do reset, and wx_set_rx_mode() > also will be called during the reset process. So I think "if else" is more appropriate > here. Hi Jiawen Wu, Thanks for your response. Looking over this again it seems that I misread the code the first time around. And i think that the current if ... else if ... construction is fine. Sorry for the noise. Reviewed-by: Simon Horman <horms@kernel.org>
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c index 945c13d1a982..c09a6f744575 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -1958,6 +1958,8 @@ int wx_sw_init(struct wx *wx) return -ENOMEM; } + bitmap_zero(wx->state, WX_STATE_NBITS); + return 0; } EXPORT_SYMBOL(wx_sw_init); diff --git a/drivers/net/ethernet/wangxun/libwx/wx_lib.c b/drivers/net/ethernet/wangxun/libwx/wx_lib.c index aefd78455468..ed6a168ff136 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_lib.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_lib.c @@ -2692,9 +2692,9 @@ int wx_set_features(struct net_device *netdev, netdev_features_t features) netdev->features = features; - if (changed & - (NETIF_F_HW_VLAN_CTAG_RX | - NETIF_F_HW_VLAN_STAG_RX)) + if (wx->mac.type == wx_mac_sp && changed & NETIF_F_HW_VLAN_CTAG_RX) + wx->do_reset(netdev); + else if (changed & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_FILTER)) wx_set_rx_mode(netdev); return 0; diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h index 1fdeb464d5f4..5aaf7b1fa2db 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_type.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h @@ -982,8 +982,13 @@ struct wx_hw_stats { u64 qmprc; }; +enum wx_state { + WX_STATE_RESETTING, + WX_STATE_NBITS, /* must be last */ +}; struct wx { unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; + DECLARE_BITMAP(state, WX_STATE_NBITS); void *priv; u8 __iomem *hw_addr; @@ -1071,6 +1076,8 @@ struct wx { u64 hw_csum_rx_good; u64 hw_csum_rx_error; u64 alloc_rx_buff_failed; + + void (*do_reset)(struct net_device *netdev); }; #define WX_INTR_ALL (~0ULL) @@ -1131,4 +1138,19 @@ static inline struct wx *phylink_to_wx(struct phylink_config *config) return container_of(config, struct wx, phylink_config); } +static inline int wx_set_state_reset(struct wx *wx) +{ + u8 timeout = 50; + + while (test_and_set_bit(WX_STATE_RESETTING, wx->state)) { + timeout--; + if (!timeout) + return -EBUSY; + + usleep_range(1000, 2000); + } + + return 0; +} + #endif /* _WX_TYPE_H_ */ diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c index 786a652ae64f..46a5a3e95202 100644 --- a/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c +++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c @@ -52,7 +52,7 @@ static int ngbe_set_ringparam(struct net_device *netdev, struct wx *wx = netdev_priv(netdev); u32 new_rx_count, new_tx_count; struct wx_ring *temp_ring; - int i; + int i, err = 0; new_tx_count = clamp_t(u32, ring->tx_pending, WX_MIN_TXD, WX_MAX_TXD); new_tx_count = ALIGN(new_tx_count, WX_REQ_TX_DESCRIPTOR_MULTIPLE); @@ -64,6 +64,10 @@ static int ngbe_set_ringparam(struct net_device *netdev, new_rx_count == wx->rx_ring_count) return 0; + err = wx_set_state_reset(wx); + if (err) + return err; + if (!netif_running(wx->netdev)) { for (i = 0; i < wx->num_tx_queues; i++) wx->tx_ring[i]->count = new_tx_count; @@ -72,14 +76,16 @@ static int ngbe_set_ringparam(struct net_device *netdev, wx->tx_ring_count = new_tx_count; wx->rx_ring_count = new_rx_count; - return 0; + goto clear_reset; } /* allocate temporary buffer to store rings in */ i = max_t(int, wx->num_tx_queues, wx->num_rx_queues); temp_ring = kvmalloc_array(i, sizeof(struct wx_ring), GFP_KERNEL); - if (!temp_ring) - return -ENOMEM; + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } ngbe_down(wx); @@ -89,7 +95,9 @@ static int ngbe_set_ringparam(struct net_device *netdev, wx_configure(wx); ngbe_up(wx); - return 0; +clear_reset: + clear_bit(WX_STATE_RESETTING, wx->state); + return err; } static int ngbe_set_channels(struct net_device *dev, diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c index db675512ce4d..31fde3fa7c6b 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c @@ -19,7 +19,7 @@ static int txgbe_set_ringparam(struct net_device *netdev, struct wx *wx = netdev_priv(netdev); u32 new_rx_count, new_tx_count; struct wx_ring *temp_ring; - int i; + int i, err = 0; new_tx_count = clamp_t(u32, ring->tx_pending, WX_MIN_TXD, WX_MAX_TXD); new_tx_count = ALIGN(new_tx_count, WX_REQ_TX_DESCRIPTOR_MULTIPLE); @@ -31,6 +31,10 @@ static int txgbe_set_ringparam(struct net_device *netdev, new_rx_count == wx->rx_ring_count) return 0; + err = wx_set_state_reset(wx); + if (err) + return err; + if (!netif_running(wx->netdev)) { for (i = 0; i < wx->num_tx_queues; i++) wx->tx_ring[i]->count = new_tx_count; @@ -39,14 +43,16 @@ static int txgbe_set_ringparam(struct net_device *netdev, wx->tx_ring_count = new_tx_count; wx->rx_ring_count = new_rx_count; - return 0; + goto clear_reset; } /* allocate temporary buffer to store rings in */ i = max_t(int, wx->num_tx_queues, wx->num_rx_queues); temp_ring = kvmalloc_array(i, sizeof(struct wx_ring), GFP_KERNEL); - if (!temp_ring) - return -ENOMEM; + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } txgbe_down(wx); @@ -55,7 +61,9 @@ static int txgbe_set_ringparam(struct net_device *netdev, txgbe_up(wx); - return 0; +clear_reset: + clear_bit(WX_STATE_RESETTING, wx->state); + return err; } static int txgbe_set_channels(struct net_device *dev, diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c index b3c0058b045d..8c7a74981b90 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c @@ -269,6 +269,8 @@ static int txgbe_sw_init(struct wx *wx) wx->tx_work_limit = TXGBE_DEFAULT_TX_WORK; wx->rx_work_limit = TXGBE_DEFAULT_RX_WORK; + wx->do_reset = txgbe_do_reset; + return 0; } @@ -421,6 +423,34 @@ int txgbe_setup_tc(struct net_device *dev, u8 tc) return 0; } +static void txgbe_reinit_locked(struct wx *wx) +{ + int err = 0; + + netif_trans_update(wx->netdev); + + err = wx_set_state_reset(wx); + if (err) { + wx_err(wx, "wait device reset timeout\n"); + return; + } + + txgbe_down(wx); + txgbe_up(wx); + + clear_bit(WX_STATE_RESETTING, wx->state); +} + +void txgbe_do_reset(struct net_device *netdev) +{ + struct wx *wx = netdev_priv(netdev); + + if (netif_running(netdev)) + txgbe_reinit_locked(wx); + else + txgbe_reset(wx); +} + static const struct net_device_ops txgbe_netdev_ops = { .ndo_open = txgbe_open, .ndo_stop = txgbe_close, diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h index 1b4ff50d5857..f434a7865cb7 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h @@ -134,6 +134,7 @@ extern char txgbe_driver_name[]; void txgbe_down(struct wx *wx); void txgbe_up(struct wx *wx); int txgbe_setup_tc(struct net_device *dev, u8 tc); +void txgbe_do_reset(struct net_device *netdev); #define NODE_PROP(_NAME, _PROP) \ (const struct software_node) { \
When VLAN tag strip is changed to enable or disable, the hardware requires the Rx ring to be in a disabled state, otherwise the feature cannot be changed. Fixes: f3b03c655f67 ("net: wangxun: Implement vlan add and kill functions") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> --- drivers/net/ethernet/wangxun/libwx/wx_hw.c | 2 ++ drivers/net/ethernet/wangxun/libwx/wx_lib.c | 6 ++-- drivers/net/ethernet/wangxun/libwx/wx_type.h | 22 ++++++++++++++ .../net/ethernet/wangxun/ngbe/ngbe_ethtool.c | 18 +++++++---- .../ethernet/wangxun/txgbe/txgbe_ethtool.c | 18 +++++++---- .../net/ethernet/wangxun/txgbe/txgbe_main.c | 30 +++++++++++++++++++ .../net/ethernet/wangxun/txgbe/txgbe_type.h | 1 + 7 files changed, 84 insertions(+), 13 deletions(-)