@@ -181,6 +181,22 @@ config CAN_LIN
Actual device drivers need to be enabled too.
+config CAN_LIN_SERDEV
+ tristate "Serial LIN Adaptors"
+ depends on CAN_LIN && SERIAL_DEV_BUS && OF
+ help
+ LIN-Bus support for serial devices equipped with LIN transceievers.
+ This device driver is using CAN_LIN for a userland connection on
+ one side and the kernel its serial device bus (serdev) interface
+ on the other side.
+
+ If you have a hexlin tty adapter, say Y here and see
+ <https://hexdev.de/hexlin#tty>.
+
+ This driver can also be built as a module. If so, the module will be
+ called lin-serdev.ko.
+
+
config CAN_SLCAN
tristate "Serial / USB serial CAN Adaptors (slcan)"
depends on TTY
@@ -26,6 +26,7 @@ obj-$(CONFIG_CAN_IFI_CANFD) += ifi_canfd/
obj-$(CONFIG_CAN_JANZ_ICAN3) += janz-ican3.o
obj-$(CONFIG_CAN_KVASER_PCIEFD) += kvaser_pciefd.o
obj-$(CONFIG_CAN_LIN) += lin.o
+obj-$(CONFIG_CAN_LIN_SERDEV) += lin-serdev.o
obj-$(CONFIG_CAN_MSCAN) += mscan/
obj-$(CONFIG_CAN_M_CAN) += m_can/
obj-$(CONFIG_CAN_PEAK_PCIEFD) += peak_canfd/
new file mode 100644
@@ -0,0 +1,514 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2024 hexDEV GmbH - https://hexdev.de */
+
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <net/lin.h>
+#include <linux/of.h>
+#include <linux/serdev.h>
+#include <linux/slab.h>
+#include <linux/kfifo.h>
+#include <linux/workqueue.h>
+#include <linux/tty.h>
+
+#define LINSER_SAMPLES_PER_CHAR 10
+#define LINSER_TX_BUFFER_SIZE 11
+#define LINSER_RX_FIFO_SIZE 256
+#define LINSER_PARSE_BUFFER 24
+
+struct linser_rx {
+ u8 data;
+ u8 flag;
+};
+
+enum linser_rx_status {
+ NEED_MORE = -1,
+ MODE_OK = 0,
+ NEED_FORCE,
+};
+
+struct linser_priv {
+ struct lin_device *lin_dev;
+ struct serdev_device *serdev;
+ DECLARE_KFIFO_PTR(rx_fifo, struct linser_rx);
+ struct delayed_work rx_work;
+ ulong break_usleep_min;
+ ulong break_usleep_max;
+ ulong post_break_usleep_min;
+ ulong post_break_usleep_max;
+ ulong force_timeout_jfs;
+ struct lin_responder_answer respond_answ[LIN_NUM_IDS];
+ struct mutex resp_lock; /* protects respond_answ */
+ bool is_stopped;
+};
+
+static int linser_open(struct lin_device *ldev)
+{
+ struct serdev_device *serdev = to_serdev_device(ldev->dev);
+ struct linser_priv *priv = serdev_device_get_drvdata(serdev);
+ int ret;
+
+ if (priv->is_stopped) {
+ ret = serdev_device_open(serdev);
+ if (ret) {
+ dev_err(&serdev->dev, "Unable to open device\n");
+ return ret;
+ }
+
+ serdev_device_set_flow_control(serdev, false);
+ serdev_device_set_break_detection(serdev, true);
+
+ priv->is_stopped = false;
+ }
+
+ return 0;
+}
+
+static int linser_stop(struct lin_device *ldev)
+{
+ struct serdev_device *serdev = to_serdev_device(ldev->dev);
+ struct linser_priv *priv = serdev_device_get_drvdata(serdev);
+
+ if (priv->is_stopped)
+ return 0;
+
+ serdev_device_close(serdev);
+ priv->is_stopped = true;
+
+ return 0;
+}
+
+static int linser_send_break(struct linser_priv *priv)
+{
+ struct serdev_device *serdev = priv->serdev;
+ int ret;
+
+ ret = serdev_device_break_ctl(serdev, -1);
+ if (ret)
+ return ret;
+
+ usleep_range(priv->break_usleep_min, priv->break_usleep_max);
+
+ ret = serdev_device_break_ctl(serdev, 0);
+ if (ret)
+ return ret;
+
+ usleep_range(priv->post_break_usleep_min, priv->post_break_usleep_max);
+
+ return 0;
+}
+
+static int linser_ldo_tx(struct lin_device *ldev, const struct lin_frame *lf)
+{
+ struct serdev_device *serdev = to_serdev_device(ldev->dev);
+ struct linser_priv *priv = serdev_device_get_drvdata(serdev);
+ u8 pid = LIN_FORM_PID(lf->lin_id);
+ u8 buf[LINSER_TX_BUFFER_SIZE];
+ ssize_t written_len, total_len;
+ u8 checksum;
+ int ret;
+
+ if (lf->len + 3 > LINSER_TX_BUFFER_SIZE) {
+ dev_err(&serdev->dev, "Frame length %u exceeds buffer size\n", lf->len);
+ return -EINVAL;
+ }
+
+ buf[0] = LIN_SYNC_BYTE;
+ buf[1] = pid;
+ total_len = 2;
+
+ if (lf->len) {
+ memcpy(&buf[2], lf->data, lf->len);
+ checksum = lin_get_checksum(pid, lf->len, lf->data,
+ lf->checksum_mode);
+ buf[lf->len + 2] = checksum;
+ total_len += lf->len + 1;
+ }
+
+ ret = linser_send_break(priv);
+ if (ret)
+ return ret;
+
+ written_len = serdev_device_write(serdev, buf, total_len, 0);
+ if (written_len < total_len)
+ return written_len < 0 ? (int)written_len : -EIO;
+
+ dev_dbg(&serdev->dev, "sent out: %*ph\n", (int)total_len, buf);
+
+ serdev_device_wait_until_sent(serdev, 0);
+
+ return 0;
+}
+
+static void linser_derive_timings(struct linser_priv *priv, u16 bitrate)
+{
+ unsigned long break_baud = (bitrate * 2) / 3;
+ unsigned long timeout_us;
+
+ priv->break_usleep_min = (1000000UL * LINSER_SAMPLES_PER_CHAR) /
+ break_baud;
+ priv->break_usleep_max = priv->break_usleep_min + 50;
+ priv->post_break_usleep_min = (1000000UL * 1 /* 1 bit */) / break_baud;
+ priv->post_break_usleep_max = priv->post_break_usleep_min + 30;
+
+ timeout_us = DIV_ROUND_CLOSEST(1000000UL * 256 /* bit */, bitrate);
+ priv->force_timeout_jfs = usecs_to_jiffies(timeout_us);
+}
+
+static int linser_update_bitrate(struct lin_device *ldev, u16 bitrate)
+{
+ struct serdev_device *serdev = to_serdev_device(ldev->dev);
+ struct linser_priv *priv = serdev_device_get_drvdata(serdev);
+ unsigned int speed;
+ int ret;
+
+ ret = linser_open(ldev);
+ if (ret)
+ return ret;
+
+ speed = serdev_device_set_baudrate(serdev, bitrate);
+ if (!bitrate || speed != bitrate)
+ return -EINVAL;
+
+ linser_derive_timings(priv, bitrate);
+
+ return 0;
+}
+
+static int linser_get_responder_answer(struct lin_device *ldev, u8 id,
+ struct lin_responder_answer *answ)
+{
+ struct serdev_device *serdev = to_serdev_device(ldev->dev);
+ struct linser_priv *priv = serdev_device_get_drvdata(serdev);
+ struct lin_responder_answer *r = &priv->respond_answ[id];
+
+ if (!answ)
+ return -EINVAL;
+
+ mutex_lock(&priv->resp_lock);
+ memcpy(answ, r, sizeof(struct lin_responder_answer));
+ mutex_unlock(&priv->resp_lock);
+
+ return 0;
+}
+
+static int linser_update_resp_answer(struct lin_device *ldev,
+ const struct lin_responder_answer *answ)
+{
+ struct serdev_device *serdev = to_serdev_device(ldev->dev);
+ struct linser_priv *priv = serdev_device_get_drvdata(serdev);
+ struct lin_responder_answer *r = &priv->respond_answ[answ->lf.lin_id];
+
+ if (!answ)
+ return -EINVAL;
+
+ mutex_lock(&priv->resp_lock);
+ memcpy(r, answ, sizeof(struct lin_responder_answer));
+ r->lf.checksum = lin_get_checksum(LIN_FORM_PID(answ->lf.lin_id),
+ answ->lf.len,
+ answ->lf.data,
+ answ->lf.checksum_mode);
+ mutex_unlock(&priv->resp_lock);
+
+ return 0;
+}
+
+static struct lin_device_ops linser_lindev_ops = {
+ .ldo_open = linser_open,
+ .ldo_stop = linser_stop,
+ .ldo_tx = linser_ldo_tx,
+ .update_bitrate = linser_update_bitrate,
+ .get_responder_answer = linser_get_responder_answer,
+ .update_responder_answer = linser_update_resp_answer,
+};
+
+static bool linser_tx_frame_as_responder(struct linser_priv *priv, u8 id)
+{
+ struct lin_responder_answer *answ = &priv->respond_answ[id];
+ struct serdev_device *serdev = priv->serdev;
+ u8 buf[LINSER_TX_BUFFER_SIZE];
+ u8 checksum, count, n;
+ ssize_t write_len;
+
+ mutex_lock(&priv->resp_lock);
+
+ if (!answ->is_active)
+ goto unlock_and_exit_false;
+
+ if (answ->is_event_frame) {
+ struct lin_responder_answer *e_answ;
+
+ e_answ = &priv->respond_answ[answ->event_associated_id];
+ n = min(e_answ->lf.len, LIN_MAX_DLEN);
+ if (memcmp(answ->lf.data, e_answ->lf.data, n) != 0) {
+ memcpy(answ->lf.data, e_answ->lf.data, n);
+ checksum = lin_get_checksum(LIN_FORM_PID(answ->lf.lin_id),
+ n, e_answ->lf.data,
+ answ->lf.checksum_mode);
+ answ = e_answ;
+ } else {
+ goto unlock_and_exit_false;
+ }
+ } else {
+ checksum = answ->lf.checksum;
+ }
+
+ count = min(answ->lf.len, LIN_MAX_DLEN);
+ memcpy(&buf[0], answ->lf.data, count);
+ buf[count] = checksum;
+
+ mutex_unlock(&priv->resp_lock);
+
+ write_len = serdev_device_write(serdev, buf, count + 1, 0);
+ if (write_len < count + 1)
+ return false;
+
+ serdev_device_wait_until_sent(serdev, 0);
+
+ return true;
+
+unlock_and_exit_false:
+ mutex_unlock(&priv->resp_lock);
+ return false;
+}
+
+static void linser_pop_fifo(struct linser_priv *priv, size_t n)
+{
+ struct serdev_device *serdev = priv->serdev;
+ struct linser_rx dummy;
+ size_t ret, i;
+
+ for (i = 0; i < n; i++) {
+ ret = kfifo_out(&priv->rx_fifo, &dummy, 1);
+ if (ret != 1) {
+ dev_err(&serdev->dev, "Failed to pop from FIFO\n");
+ break;
+ }
+ }
+}
+
+static int linser_fill_frame(struct linser_priv *priv, struct lin_frame *lf)
+{
+ struct serdev_device *serdev = priv->serdev;
+ struct linser_rx buf[LINSER_PARSE_BUFFER];
+ unsigned int count, i, brk = 0;
+
+ count = kfifo_out_peek(&priv->rx_fifo, buf, LINSER_PARSE_BUFFER);
+
+ memset(lf, 0, sizeof(struct lin_frame));
+
+ for (i = 0; i < count; i++) {
+ dev_dbg(&serdev->dev, "buf[%d]: data=%02x, flag=%02x\n",
+ i, buf[i].data, buf[i].flag);
+ }
+
+ if (count < 3)
+ return NEED_MORE;
+
+ if (buf[0].flag != TTY_BREAK || buf[1].data != LIN_SYNC_BYTE) {
+ linser_pop_fifo(priv, 1); /* pop incorrect start */
+ return NEED_MORE;
+ } else if (!LIN_CHECK_PID(buf[2].data)) {
+ linser_pop_fifo(priv, 3); /* pop incorrect header */
+ return NEED_MORE;
+ }
+
+ lf->lin_id = LIN_GET_ID(buf[2].data);
+
+ /* from here on we do have a correct LIN header */
+
+ if (count == 3)
+ return linser_tx_frame_as_responder(priv, lf->lin_id) ?
+ NEED_MORE : NEED_FORCE;
+
+ for (i = 3; i < count && i < LINSER_PARSE_BUFFER && i < 12; i++) {
+ if (buf[i].flag == TTY_BREAK) {
+ brk = i;
+ break;
+ }
+ lf->len++;
+ }
+ if (lf->len)
+ lf->len -= 1; /* account for checksum */
+
+ if (brk == 3)
+ return MODE_OK;
+
+ if (brk == 4) {
+ /* suppress wrong answer data-byte in between PID and break
+ * because checksum is missing
+ */
+ return MODE_OK;
+ }
+
+ for (i = 0; i < lf->len; i++)
+ lf->data[i] = buf[3 + i].data;
+ lf->checksum = buf[2 + lf->len + 1].data;
+ mutex_lock(&priv->resp_lock);
+ lf->checksum_mode = priv->respond_answ[lf->lin_id].lf.checksum_mode;
+ mutex_unlock(&priv->resp_lock);
+
+ dev_dbg(&serdev->dev, "brk:%i, len:%u, data:%*ph, checksum:%x (%s)\n",
+ brk, lf->len, lf->len, lf->data, lf->checksum,
+ lf->checksum_mode ? "enhanced" : "classic");
+
+ if (brk > 4)
+ return MODE_OK; /* frame in between two breaks: so complete */
+
+ if (lf->len == 8)
+ return MODE_OK;
+
+ return NEED_FORCE;
+}
+
+static int linser_process_frame(struct linser_priv *priv, bool force)
+{
+ struct serdev_device *serdev = priv->serdev;
+ struct lin_frame lf;
+ size_t bytes_to_pop;
+ int ret = NEED_MORE;
+
+ while (kfifo_len(&priv->rx_fifo) >= LIN_HEADER_SIZE) {
+ ret = linser_fill_frame(priv, &lf);
+
+ if (ret == MODE_OK || (ret == NEED_FORCE && force)) {
+ dev_dbg(&serdev->dev, "lin_rx: %s\n",
+ force ? "force" : "normal");
+ lin_rx(priv->lin_dev, &lf);
+ bytes_to_pop = LIN_HEADER_SIZE + lf.len +
+ (lf.len ? 1 : 0);
+ linser_pop_fifo(priv, bytes_to_pop);
+ force = false;
+ ret = MODE_OK;
+ } else {
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static void linser_process_delayed(struct work_struct *work)
+{
+ struct linser_priv *priv = container_of(work, struct linser_priv,
+ rx_work.work);
+
+ linser_process_frame(priv, true);
+}
+
+static ssize_t linser_receive_buf_fp(struct serdev_device *serdev,
+ const u8 *data, const u8 *fp,
+ size_t count)
+{
+ struct linser_priv *priv = serdev_device_get_drvdata(serdev);
+ enum linser_rx_status rx_status;
+ ssize_t n = 0;
+ int i;
+
+ cancel_delayed_work_sync(&priv->rx_work);
+
+ for (i = 0; i < count; i++) {
+ struct linser_rx rx;
+
+ rx.data = data[i];
+ rx.flag = (fp ? fp[i] : 0);
+ n += kfifo_in(&priv->rx_fifo, &rx, 1);
+ dev_dbg(&serdev->dev, "%s: n:%zd, flag:0x%02x, data:0x%02x\n",
+ __func__, n, rx.flag, data[i]);
+ }
+
+ rx_status = linser_process_frame(priv, false);
+
+ if (rx_status == NEED_FORCE)
+ schedule_delayed_work(&priv->rx_work, priv->force_timeout_jfs);
+
+ return n;
+}
+
+static const struct serdev_device_ops linser_ops = {
+ .receive_buf_fp = linser_receive_buf_fp,
+ .write_wakeup = serdev_device_write_wakeup,
+};
+
+static int linser_probe(struct serdev_device *serdev)
+{
+ struct linser_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&serdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ret = kfifo_alloc(&priv->rx_fifo, LINSER_RX_FIFO_SIZE, GFP_KERNEL);
+ if (ret)
+ return ret;
+
+ INIT_DELAYED_WORK(&priv->rx_work, linser_process_delayed);
+
+ priv->serdev = serdev;
+ serdev_device_set_drvdata(serdev, priv);
+ serdev_device_set_client_ops(serdev, &linser_ops);
+
+ ret = serdev_device_open(serdev);
+ if (ret) {
+ dev_err(&serdev->dev, "Unable to open device\n");
+ goto err_open;
+ }
+
+ serdev_device_set_flow_control(serdev, false);
+ serdev_device_set_break_detection(serdev, true);
+ linser_derive_timings(priv, LIN_DEFAULT_BAUDRATE);
+
+ mutex_init(&priv->resp_lock);
+
+ priv->lin_dev = register_lin(&serdev->dev, &linser_lindev_ops);
+ if (IS_ERR_OR_NULL(priv->lin_dev)) {
+ ret = PTR_ERR(priv->lin_dev);
+ goto err_register_lin;
+ }
+
+ serdev_device_close(serdev);
+ priv->is_stopped = true;
+
+ return 0;
+
+err_register_lin:
+ serdev_device_close(serdev);
+err_open:
+ kfifo_free(&priv->rx_fifo);
+ return ret;
+}
+
+static void linser_remove(struct serdev_device *serdev)
+{
+ struct linser_priv *priv = serdev_device_get_drvdata(serdev);
+
+ unregister_lin(priv->lin_dev);
+}
+
+static const struct of_device_id linser_of_match[] = {
+ {
+ .compatible = "hexdev,lin-serdev",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, linser_of_match);
+
+static struct serdev_device_driver linser_driver = {
+ .probe = linser_probe,
+ .remove = linser_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = linser_of_match,
+ }
+};
+
+module_serdev_device_driver(linser_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christoph Fritz <christoph.fritz@hexdev.de>");
+MODULE_DESCRIPTION("LIN-Bus serdev driver");
This commit introduces LIN-Bus support for UART devices equipped with LIN transceivers, utilizing the Serial Device Bus (serdev) interface. For more details on an adapter, visit: https://hexdev.de/hexlin#tty Signed-off-by: Christoph Fritz <christoph.fritz@hexdev.de> --- drivers/net/can/Kconfig | 16 ++ drivers/net/can/Makefile | 1 + drivers/net/can/lin-serdev.c | 514 +++++++++++++++++++++++++++++++++++ 3 files changed, 531 insertions(+) create mode 100644 drivers/net/can/lin-serdev.c