| Message ID | 20240509094228.1035477-1-i.maximets@ovn.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 7c988176b6c16c516474f6fceebe0f055af5eb56 |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net] net: openvswitch: fix overwriting ct original tuple for ICMPv6 | expand |
I tested this patch by applying it to 6.8.9, and it addresses the issue I observed. On Thu, May 9, 2024 at 2:41 AM Ilya Maximets <i.maximets@ovn.org> wrote: > > OVS_PACKET_CMD_EXECUTE has 3 main attributes: > - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. > - OVS_PACKET_ATTR_PACKET - Binary packet content. > - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. > > OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure > with the metadata like conntrack state, input port, recirculation id, > etc. Then the packet itself gets parsed to populate the rest of the > keys from the packet headers. > > Whenever the packet parsing code starts parsing the ICMPv6 header, it > first zeroes out fields in the key corresponding to Neighbor Discovery > information even if it is not an ND packet. > > It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares > the space between 'nd' and 'ct_orig' that holds the original tuple > conntrack metadata parsed from the OVS_PACKET_ATTR_KEY. > > ND packets should not normally have conntrack state, so it's fine to > share the space, but normal ICMPv6 Echo packets or maybe other types of > ICMPv6 can have the state attached and it should not be overwritten. > > The issue results in all but the last 4 bytes of the destination > address being wiped from the original conntrack tuple leading to > incorrect packet matching and potentially executing wrong actions > in case this packet recirculates within the datapath or goes back > to userspace. > > ND fields should not be accessed in non-ND packets, so not clearing > them should be fine. Executing memset() only for actual ND packets to > avoid the issue. > > Initializing the whole thing before parsing is needed because ND packet > may not contain all the options. > > The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't > affect packets entering OVS datapath from network interfaces, because > in this case CT metadata is populated from skb after the packet is > already parsed. > > Fixes: 9dd7f8907c37 ("openvswitch: Add original direction conntrack tuple to sw_flow_key.") > Reported-by: Antonin Bas <antonin.bas@broadcom.com> > Closes: https://github.com/openvswitch/ovs-issues/issues/327 > Signed-off-by: Ilya Maximets <i.maximets@ovn.org> > --- > > Note: I'm working on a selftest for this issue, but it requires some > ground work first to add support for OVS_PACKET_CMD_EXECUTE into > opnevswitch selftests as well as parsing of ct tuples. So it is going > to be a separate patch set. > > net/openvswitch/flow.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c > index 33b21a0c0548..8a848ce72e29 100644 > --- a/net/openvswitch/flow.c > +++ b/net/openvswitch/flow.c > @@ -561,7 +561,6 @@ static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key, > */ > key->tp.src = htons(icmp->icmp6_type); > key->tp.dst = htons(icmp->icmp6_code); > - memset(&key->ipv6.nd, 0, sizeof(key->ipv6.nd)); > > if (icmp->icmp6_code == 0 && > (icmp->icmp6_type == NDISC_NEIGHBOUR_SOLICITATION || > @@ -570,6 +569,8 @@ static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key, > struct nd_msg *nd; > int offset; > > + memset(&key->ipv6.nd, 0, sizeof(key->ipv6.nd)); > + > /* In order to process neighbor discovery options, we need the > * entire packet. > */ > -- > 2.44.0 >
Ilya Maximets <i.maximets@ovn.org> writes: > OVS_PACKET_CMD_EXECUTE has 3 main attributes: > - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. > - OVS_PACKET_ATTR_PACKET - Binary packet content. > - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. > > OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure > with the metadata like conntrack state, input port, recirculation id, > etc. Then the packet itself gets parsed to populate the rest of the > keys from the packet headers. > > Whenever the packet parsing code starts parsing the ICMPv6 header, it > first zeroes out fields in the key corresponding to Neighbor Discovery > information even if it is not an ND packet. > > It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares > the space between 'nd' and 'ct_orig' that holds the original tuple > conntrack metadata parsed from the OVS_PACKET_ATTR_KEY. > > ND packets should not normally have conntrack state, so it's fine to > share the space, but normal ICMPv6 Echo packets or maybe other types of > ICMPv6 can have the state attached and it should not be overwritten. > > The issue results in all but the last 4 bytes of the destination > address being wiped from the original conntrack tuple leading to > incorrect packet matching and potentially executing wrong actions > in case this packet recirculates within the datapath or goes back > to userspace. > > ND fields should not be accessed in non-ND packets, so not clearing > them should be fine. Executing memset() only for actual ND packets to > avoid the issue. > > Initializing the whole thing before parsing is needed because ND packet > may not contain all the options. > > The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't > affect packets entering OVS datapath from network interfaces, because > in this case CT metadata is populated from skb after the packet is > already parsed. > > Fixes: 9dd7f8907c37 ("openvswitch: Add original direction conntrack > tuple to sw_flow_key.") > Reported-by: Antonin Bas <antonin.bas@broadcom.com> > Closes: https://github.com/openvswitch/ovs-issues/issues/327 > Signed-off-by: Ilya Maximets <i.maximets@ovn.org> > --- Acked-by: Aaron Conole <aconole@redhat.com> > Note: I'm working on a selftest for this issue, but it requires some > ground work first to add support for OVS_PACKET_CMD_EXECUTE into > opnevswitch selftests as well as parsing of ct tuples. So it is going > to be a separate patch set. I do have something already to do this for an issue in CMD_EXECUTE that I'm debugging (may be the same?). I can reply with my work off-list if you think it would be useful to you. > net/openvswitch/flow.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c > index 33b21a0c0548..8a848ce72e29 100644 > --- a/net/openvswitch/flow.c > +++ b/net/openvswitch/flow.c > @@ -561,7 +561,6 @@ static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key, > */ > key->tp.src = htons(icmp->icmp6_type); > key->tp.dst = htons(icmp->icmp6_code); > - memset(&key->ipv6.nd, 0, sizeof(key->ipv6.nd)); > > if (icmp->icmp6_code == 0 && > (icmp->icmp6_type == NDISC_NEIGHBOUR_SOLICITATION || > @@ -570,6 +569,8 @@ static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key, > struct nd_msg *nd; > int offset; > > + memset(&key->ipv6.nd, 0, sizeof(key->ipv6.nd)); > + > /* In order to process neighbor discovery options, we need the > * entire packet. > */
On 9 May 2024, at 11:38, Ilya Maximets wrote: > OVS_PACKET_CMD_EXECUTE has 3 main attributes: > - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. > - OVS_PACKET_ATTR_PACKET - Binary packet content. > - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. > > OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure > with the metadata like conntrack state, input port, recirculation id, > etc. Then the packet itself gets parsed to populate the rest of the > keys from the packet headers. > > Whenever the packet parsing code starts parsing the ICMPv6 header, it > first zeroes out fields in the key corresponding to Neighbor Discovery > information even if it is not an ND packet. > > It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares > the space between 'nd' and 'ct_orig' that holds the original tuple > conntrack metadata parsed from the OVS_PACKET_ATTR_KEY. > > ND packets should not normally have conntrack state, so it's fine to > share the space, but normal ICMPv6 Echo packets or maybe other types of > ICMPv6 can have the state attached and it should not be overwritten. > > The issue results in all but the last 4 bytes of the destination > address being wiped from the original conntrack tuple leading to > incorrect packet matching and potentially executing wrong actions > in case this packet recirculates within the datapath or goes back > to userspace. > > ND fields should not be accessed in non-ND packets, so not clearing > them should be fine. Executing memset() only for actual ND packets to > avoid the issue. > > Initializing the whole thing before parsing is needed because ND packet > may not contain all the options. > > The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't > affect packets entering OVS datapath from network interfaces, because > in this case CT metadata is populated from skb after the packet is > already parsed. > > Fixes: 9dd7f8907c37 ("openvswitch: Add original direction conntrack tuple to sw_flow_key.") > Reported-by: Antonin Bas <antonin.bas@broadcom.com> > Closes: https://github.com/openvswitch/ovs-issues/issues/327 > Signed-off-by: Ilya Maximets <i.maximets@ovn.org> This patch looks good to me. Acked-by: Eelco Chaudron <echaudro@redhat.com> > --- > > Note: I'm working on a selftest for this issue, but it requires some > ground work first to add support for OVS_PACKET_CMD_EXECUTE into > opnevswitch selftests as well as parsing of ct tuples. So it is going > to be a separate patch set. > > net/openvswitch/flow.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c > index 33b21a0c0548..8a848ce72e29 100644 > --- a/net/openvswitch/flow.c > +++ b/net/openvswitch/flow.c > @@ -561,7 +561,6 @@ static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key, > */ > key->tp.src = htons(icmp->icmp6_type); > key->tp.dst = htons(icmp->icmp6_code); > - memset(&key->ipv6.nd, 0, sizeof(key->ipv6.nd)); > > if (icmp->icmp6_code == 0 && > (icmp->icmp6_type == NDISC_NEIGHBOUR_SOLICITATION || > @@ -570,6 +569,8 @@ static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key, > struct nd_msg *nd; > int offset; > > + memset(&key->ipv6.nd, 0, sizeof(key->ipv6.nd)); > + > /* In order to process neighbor discovery options, we need the > * entire packet. > */ > -- > 2.44.0 > > _______________________________________________ > dev mailing list > dev@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev
Hello: This patch was applied to netdev/net.git (main) by Jakub Kicinski <kuba@kernel.org>: On Thu, 9 May 2024 11:38:05 +0200 you wrote: > OVS_PACKET_CMD_EXECUTE has 3 main attributes: > - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. > - OVS_PACKET_ATTR_PACKET - Binary packet content. > - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. > > OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure > with the metadata like conntrack state, input port, recirculation id, > etc. Then the packet itself gets parsed to populate the rest of the > keys from the packet headers. > > [...] Here is the summary with links: - [net] net: openvswitch: fix overwriting ct original tuple for ICMPv6 https://git.kernel.org/netdev/net/c/7c988176b6c1 You are awesome, thank you!
diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c index 33b21a0c0548..8a848ce72e29 100644 --- a/net/openvswitch/flow.c +++ b/net/openvswitch/flow.c @@ -561,7 +561,6 @@ static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key, */ key->tp.src = htons(icmp->icmp6_type); key->tp.dst = htons(icmp->icmp6_code); - memset(&key->ipv6.nd, 0, sizeof(key->ipv6.nd)); if (icmp->icmp6_code == 0 && (icmp->icmp6_type == NDISC_NEIGHBOUR_SOLICITATION || @@ -570,6 +569,8 @@ static int parse_icmpv6(struct sk_buff *skb, struct sw_flow_key *key, struct nd_msg *nd; int offset; + memset(&key->ipv6.nd, 0, sizeof(key->ipv6.nd)); + /* In order to process neighbor discovery options, we need the * entire packet. */
OVS_PACKET_CMD_EXECUTE has 3 main attributes: - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. - OVS_PACKET_ATTR_PACKET - Binary packet content. - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure with the metadata like conntrack state, input port, recirculation id, etc. Then the packet itself gets parsed to populate the rest of the keys from the packet headers. Whenever the packet parsing code starts parsing the ICMPv6 header, it first zeroes out fields in the key corresponding to Neighbor Discovery information even if it is not an ND packet. It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares the space between 'nd' and 'ct_orig' that holds the original tuple conntrack metadata parsed from the OVS_PACKET_ATTR_KEY. ND packets should not normally have conntrack state, so it's fine to share the space, but normal ICMPv6 Echo packets or maybe other types of ICMPv6 can have the state attached and it should not be overwritten. The issue results in all but the last 4 bytes of the destination address being wiped from the original conntrack tuple leading to incorrect packet matching and potentially executing wrong actions in case this packet recirculates within the datapath or goes back to userspace. ND fields should not be accessed in non-ND packets, so not clearing them should be fine. Executing memset() only for actual ND packets to avoid the issue. Initializing the whole thing before parsing is needed because ND packet may not contain all the options. The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't affect packets entering OVS datapath from network interfaces, because in this case CT metadata is populated from skb after the packet is already parsed. Fixes: 9dd7f8907c37 ("openvswitch: Add original direction conntrack tuple to sw_flow_key.") Reported-by: Antonin Bas <antonin.bas@broadcom.com> Closes: https://github.com/openvswitch/ovs-issues/issues/327 Signed-off-by: Ilya Maximets <i.maximets@ovn.org> --- Note: I'm working on a selftest for this issue, but it requires some ground work first to add support for OVS_PACKET_CMD_EXECUTE into opnevswitch selftests as well as parsing of ct tuples. So it is going to be a separate patch set. net/openvswitch/flow.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)