@@ -17,6 +17,8 @@
#define LIBETH_MAX_HEADROOM LIBETH_SKB_HEADROOM
/* Link layer / L2 overhead: Ethernet, 2 VLAN tags (C + S), FCS */
#define LIBETH_RX_LL_LEN (ETH_HLEN + 2 * VLAN_HLEN + ETH_FCS_LEN)
+/* Maximum supported L2-L4 header length */
+#define LIBETH_MAX_HEAD roundup_pow_of_two(max(MAX_HEADER, 256))
/* Always use order-0 pages */
#define LIBETH_RX_PAGE_ORDER 0
@@ -43,6 +45,18 @@ struct libeth_fqe {
u32 truesize;
} __aligned_largest;
+/**
+ * enum libeth_fqe_type - enum representing types of Rx buffers
+ * @LIBETH_FQE_MTU: buffer size is determined by MTU
+ * @LIBETH_FQE_SHORT: buffer size is smaller than MTU, for short frames
+ * @LIBETH_FQE_HDR: buffer size is ```LIBETH_MAX_HEAD```-sized, for headers
+ */
+enum libeth_fqe_type {
+ LIBETH_FQE_MTU = 0U,
+ LIBETH_FQE_SHORT,
+ LIBETH_FQE_HDR,
+};
+
/**
* struct libeth_fq - structure representing a buffer (fill) queue
* @fp: hotpath part of the structure
@@ -50,6 +64,8 @@ struct libeth_fqe {
* @fqes: array of Rx buffers
* @truesize: size to allocate per buffer, w/overhead
* @count: number of descriptors/buffers the queue has
+ * @type: type of the buffers this queue has
+ * @hsplit: flag whether header split is enabled
* @buf_len: HW-writeable length per each buffer
* @nid: ID of the closest NUMA node with memory
*/
@@ -63,6 +79,9 @@ struct libeth_fq {
);
/* Cold fields */
+ enum libeth_fqe_type type:2;
+ bool hsplit:1;
+
u32 buf_len;
int nid;
};
@@ -6,7 +6,7 @@
/* Rx buffer management */
/**
- * libeth_rx_hw_len - get the actual buffer size to be passed to HW
+ * libeth_rx_hw_len_mtu - get the actual buffer size to be passed to HW
* @pp: &page_pool_params of the netdev to calculate the size for
* @max_len: maximum buffer size for a single descriptor
*
@@ -14,7 +14,7 @@
* MTU the @dev has, HW required alignment, minimum and maximum allowed values,
* and system's page size.
*/
-static u32 libeth_rx_hw_len(const struct page_pool_params *pp, u32 max_len)
+static u32 libeth_rx_hw_len_mtu(const struct page_pool_params *pp, u32 max_len)
{
u32 len;
@@ -26,6 +26,106 @@ static u32 libeth_rx_hw_len(const struct page_pool_params *pp, u32 max_len)
return len;
}
+/**
+ * libeth_rx_hw_len_truesize - get the short buffer size to be passed to HW
+ * @pp: &page_pool_params of the netdev to calculate the size for
+ * @max_len: maximum buffer size for a single descriptor
+ * @truesize: desired truesize for the buffers
+ *
+ * Return: HW-writeable length per one buffer to pass it to the HW ignoring the
+ * MTU and closest to the passed truesize. Can be used for "short" buffer
+ * queues to fragment pages more efficiently.
+ */
+static u32 libeth_rx_hw_len_truesize(const struct page_pool_params *pp,
+ u32 max_len, u32 truesize)
+{
+ u32 min, len;
+
+ min = SKB_HEAD_ALIGN(pp->offset + LIBETH_RX_BUF_STRIDE);
+ truesize = clamp(roundup_pow_of_two(truesize), roundup_pow_of_two(min),
+ PAGE_SIZE << LIBETH_RX_PAGE_ORDER);
+
+ len = SKB_WITH_OVERHEAD(truesize - pp->offset);
+ len = ALIGN_DOWN(len, LIBETH_RX_BUF_STRIDE) ? : LIBETH_RX_BUF_STRIDE;
+ len = min3(len, ALIGN_DOWN(max_len ? : U32_MAX, LIBETH_RX_BUF_STRIDE),
+ pp->max_len);
+
+ return len;
+}
+
+static bool libeth_rx_page_pool_params(struct libeth_fq *fq,
+ struct page_pool_params *pp)
+{
+ pp->offset = LIBETH_SKB_HEADROOM;
+ /* HW-writeable / syncable length per one page */
+ pp->max_len = LIBETH_RX_PAGE_LEN(pp->offset);
+
+ /* HW-writeable length per buffer */
+ switch (fq->type) {
+ case LIBETH_FQE_MTU:
+ fq->buf_len = libeth_rx_hw_len_mtu(pp, fq->buf_len);
+ break;
+ case LIBETH_FQE_SHORT:
+ fq->buf_len = libeth_rx_hw_len_truesize(pp, fq->buf_len,
+ fq->truesize);
+ break;
+ case LIBETH_FQE_HDR:
+ fq->buf_len = ALIGN(LIBETH_MAX_HEAD, LIBETH_RX_BUF_STRIDE);
+ break;
+ default:
+ return false;
+ }
+
+ /* Buffer size to allocate */
+ fq->truesize = roundup_pow_of_two(SKB_HEAD_ALIGN(pp->offset +
+ fq->buf_len));
+
+ return true;
+}
+
+/**
+ * libeth_rx_page_pool_params_zc - calculate params without the stack overhead
+ * @fq: buffer queue to calculate the size for
+ * @pp: &page_pool_params of the netdev
+ *
+ * Adjusts the PP params to exclude the stack overhead and sets both the buffer
+ * lengh and the truesize, which are equal for the data buffers. Note that this
+ * requires separate header buffers to be always active and account the
+ * overhead.
+ * With the MTU == ``PAGE_SIZE``, this allows the kernel to enable the zerocopy
+ * mode.
+ *
+ * Return: true on success, false on invalid input params.
+ */
+static bool libeth_rx_page_pool_params_zc(struct libeth_fq *fq,
+ struct page_pool_params *pp)
+{
+ u32 mtu, max;
+
+ pp->offset = 0;
+ pp->max_len = PAGE_SIZE << LIBETH_RX_PAGE_ORDER;
+
+ switch (fq->type) {
+ case LIBETH_FQE_MTU:
+ mtu = READ_ONCE(pp->netdev->mtu);
+ break;
+ case LIBETH_FQE_SHORT:
+ mtu = fq->truesize;
+ break;
+ default:
+ return false;
+ }
+
+ mtu = roundup_pow_of_two(mtu);
+ max = min(rounddown_pow_of_two(fq->buf_len ? : U32_MAX),
+ pp->max_len);
+
+ fq->buf_len = clamp(mtu, LIBETH_RX_BUF_STRIDE, max);
+ fq->truesize = fq->buf_len;
+
+ return true;
+}
+
/**
* libeth_rx_fq_create - create a PP with the default libeth settings
* @fq: buffer queue struct to fill
@@ -44,19 +144,17 @@ int libeth_rx_fq_create(struct libeth_fq *fq, struct napi_struct *napi)
.netdev = napi->dev,
.napi = napi,
.dma_dir = DMA_FROM_DEVICE,
- .offset = LIBETH_SKB_HEADROOM,
};
struct libeth_fqe *fqes;
struct page_pool *pool;
-
- /* HW-writeable / syncable length per one page */
- pp.max_len = LIBETH_RX_PAGE_LEN(pp.offset);
-
- /* HW-writeable length per buffer */
- fq->buf_len = libeth_rx_hw_len(&pp, fq->buf_len);
- /* Buffer size to allocate */
- fq->truesize = roundup_pow_of_two(SKB_HEAD_ALIGN(pp.offset +
- fq->buf_len));
+ bool ret;
+
+ if (!fq->hsplit)
+ ret = libeth_rx_page_pool_params(fq, &pp);
+ else
+ ret = libeth_rx_page_pool_params_zc(fq, &pp);
+ if (!ret)
+ return -EINVAL;
pool = page_pool_create(&pp);
if (IS_ERR(pool))
Unlike previous generations, idpf requires more buffer types for optimal performance. This includes: header buffers, short buffers, and no-overhead buffers (w/o headroom and tailroom, for TCP zerocopy when the header split is enabled). Introduce libeth Rx buffer type and calculate page_pool params accordingly. All the HW-related details like buffer alignment are still accounted. For the header buffers, pick 256 bytes as in most places in the kernel (have you ever seen frames with bigger headers?). Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> --- include/net/libeth/rx.h | 19 ++++ drivers/net/ethernet/intel/libeth/rx.c | 122 ++++++++++++++++++++++--- 2 files changed, 129 insertions(+), 12 deletions(-)