diff mbox series

[v2,02/19] reset: mchp: sparx5: Remove dependencies and allow building as a module

Message ID 20240527161450.326615-3-herve.codina@bootlin.com (mailing list archive)
State Not Applicable
Headers show
Series Add support for the LAN966x PCI device using a DT overlay | expand

Checks

Context Check Description
netdev/series_format fail Series longer than 15 patches
netdev/tree_selection success Guessed tree name to be net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 904 this patch: 904
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/build_clang success Errors and warnings before: 906 this patch: 906
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 908 this patch: 908
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 20 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Herve Codina May 27, 2024, 4:14 p.m. UTC 
From: Clément Léger <clement.leger@bootlin.com>

The sparx5 reset controller depends on the SPARX5 architecture or the
LAN966x SoC.

This reset controller can be used by the LAN966x PCI device and so it
needs to be available on all architectures.
Also the LAN966x PCI device driver can be built as a module and this
reset controller driver has no reason to be a builtin driver in that
case.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 drivers/reset/Kconfig                  | 3 +--
 drivers/reset/reset-microchip-sparx5.c | 2 ++
 2 files changed, 3 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 7112f5932609..fb9005e2f5b5 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -124,8 +124,7 @@  config RESET_LPC18XX
 	  This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
 
 config RESET_MCHP_SPARX5
-	bool "Microchip Sparx5 reset driver"
-	depends on ARCH_SPARX5 || SOC_LAN966 || COMPILE_TEST
+	tristate "Microchip Sparx5 reset driver"
 	default y if SPARX5_SWITCH
 	select MFD_SYSCON
 	help
diff --git a/drivers/reset/reset-microchip-sparx5.c b/drivers/reset/reset-microchip-sparx5.c
index 636e85c388b0..69915c7b4941 100644
--- a/drivers/reset/reset-microchip-sparx5.c
+++ b/drivers/reset/reset-microchip-sparx5.c
@@ -158,6 +158,7 @@  static const struct of_device_id mchp_sparx5_reset_of_match[] = {
 	},
 	{ }
 };
+MODULE_DEVICE_TABLE(of, mchp_sparx5_reset_of_match);
 
 static struct platform_driver mchp_sparx5_reset_driver = {
 	.probe = mchp_sparx5_reset_probe,
@@ -180,3 +181,4 @@  postcore_initcall(mchp_sparx5_reset_init);
 
 MODULE_DESCRIPTION("Microchip Sparx5 switch reset driver");
 MODULE_AUTHOR("Steen Hegelund <steen.hegelund@microchip.com>");
+MODULE_LICENSE("GPL");