diff mbox series

[1/1] virtio-can: Add link to CAN specification from ISO.

Message ID 20240606141222.11237-1-Harald.Mommer@opensynergy.com (mailing list archive)
State Awaiting Upstream
Headers show
Series [1/1] virtio-can: Add link to CAN specification from ISO. | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Harald Mommer June 6, 2024, 2:12 p.m. UTC
Add link to the CAN specification in the ISO shop.

  ISO 11898-1:2015
  Road vehicles
  Controller area network (CAN)
  Part 1: Data link layer and physical signalling

The specification is not freely obtainable there.
---
 introduction.tex | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Vincent Mailhol June 7, 2024, 3:43 a.m. UTC | #1
On Thu. 6 Jun. 2024 at 23:26, Harald Mommer
<Harald.Mommer@opensynergy.com> wrote:
> Add link to the CAN specification in the ISO shop.
>
>   ISO 11898-1:2015
>   Road vehicles
>   Controller area network (CAN)
>   Part 1: Data link layer and physical signalling
>
> The specification is not freely obtainable there.
> ---
>  introduction.tex | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/introduction.tex b/introduction.tex
> index 8bcef03..72573d6 100644
> --- a/introduction.tex
> +++ b/introduction.tex

Excuse my ignorance, this is not a patch toward the Linux tree, right?
Could you let me know which git tree this patch is targetting?

> @@ -142,7 +142,8 @@ \section{Normative References}\label{sec:Normative References}
>      TRANSMISSION CONTROL PROTOCOL
>         \newline\url{https://www.rfc-editor.org/rfc/rfc793}\\
>         \phantomsection\label{intro:CAN}\textbf{[CAN]} &
> -    ISO 11898-1:2015 Road vehicles -- Controller area network (CAN) -- Part 1: Data link layer and physical signalling\\
> +    ISO 11898-1:2015 Road vehicles -- Controller area network (CAN) -- Part 1: Data link layer and physical signalling
> +       \newline\url{https://www.iso.org/standard/63648.html}\\
>  \end{longtable}

I just realised that ISO 11898-1:2024 was published last month:
https://www.iso.org/standard/86384.html.

Just for confirmation, are you keeping the reference to ISO
11898-1:2015 until CAN XL support gets added? If yes, OK as-is.

On my side, I now need to read the new ISO 11898-1:2024.

>
>  \section{Non-Normative References}
> --
> 2.34.1
>
>
Michael S. Tsirkin June 7, 2024, 9:09 a.m. UTC | #2
On Thu, Jun 06, 2024 at 04:12:22PM +0200, Harald Mommer wrote:
> Add link to the CAN specification in the ISO shop.
> 
>   ISO 11898-1:2015
>   Road vehicles
>   Controller area network (CAN)
>   Part 1: Data link layer and physical signalling
> 
> The specification is not freely obtainable there.

This message really should not have been posted to any
of the lists that you copied.


> ---
>  introduction.tex | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/introduction.tex b/introduction.tex
> index 8bcef03..72573d6 100644
> --- a/introduction.tex
> +++ b/introduction.tex
> @@ -142,7 +142,8 @@ \section{Normative References}\label{sec:Normative References}
>      TRANSMISSION CONTROL PROTOCOL
>  	\newline\url{https://www.rfc-editor.org/rfc/rfc793}\\
>  	\phantomsection\label{intro:CAN}\textbf{[CAN]} &
> -    ISO 11898-1:2015 Road vehicles -- Controller area network (CAN) -- Part 1: Data link layer and physical signalling\\
> +    ISO 11898-1:2015 Road vehicles -- Controller area network (CAN) -- Part 1: Data link layer and physical signalling
> +	\newline\url{https://www.iso.org/standard/63648.html}\\
>  \end{longtable}
>  
>  \section{Non-Normative References}
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/introduction.tex b/introduction.tex
index 8bcef03..72573d6 100644
--- a/introduction.tex
+++ b/introduction.tex
@@ -142,7 +142,8 @@  \section{Normative References}\label{sec:Normative References}
     TRANSMISSION CONTROL PROTOCOL
 	\newline\url{https://www.rfc-editor.org/rfc/rfc793}\\
 	\phantomsection\label{intro:CAN}\textbf{[CAN]} &
-    ISO 11898-1:2015 Road vehicles -- Controller area network (CAN) -- Part 1: Data link layer and physical signalling\\
+    ISO 11898-1:2015 Road vehicles -- Controller area network (CAN) -- Part 1: Data link layer and physical signalling
+	\newline\url{https://www.iso.org/standard/63648.html}\\
 \end{longtable}
 
 \section{Non-Normative References}