@@ -90,6 +90,7 @@ struct stm32_dwmac {
int eth_ref_clk_sel_reg;
int irq_pwr_wakeup;
u32 mode_reg; /* MAC glue-logic mode register */
+ u32 mode_mask;
struct regmap *regmap;
u32 speed;
const struct stm32_ops *ops;
@@ -102,8 +103,8 @@ struct stm32_ops {
void (*resume)(struct stm32_dwmac *dwmac);
int (*parse_data)(struct stm32_dwmac *dwmac,
struct device *dev);
- u32 syscfg_eth_mask;
bool clk_rx_enable_in_suspend;
+ u32 syscfg_clr_off;
};
static int stm32_dwmac_clk_enable(struct stm32_dwmac *dwmac, bool resume)
@@ -256,13 +257,16 @@ static int stm32mp1_configure_pmcr(struct plat_stmmacenet_data *plat_dat)
dev_dbg(dwmac->dev, "Mode %s", phy_modes(plat_dat->mac_interface));
+ /* Shift value at correct ethernet MAC offset in SYSCFG_PMCSETR */
+ val <<= ffs(dwmac->mode_mask) - ffs(SYSCFG_MP1_ETH_MASK);
+
/* Need to update PMCCLRR (clear register) */
- regmap_write(dwmac->regmap, reg + SYSCFG_PMCCLRR_OFFSET,
- dwmac->ops->syscfg_eth_mask);
+ regmap_write(dwmac->regmap, dwmac->ops->syscfg_clr_off,
+ dwmac->mode_mask);
/* Update PMCSETR (set register) */
return regmap_update_bits(dwmac->regmap, reg,
- dwmac->ops->syscfg_eth_mask, val);
+ dwmac->mode_mask, val);
}
static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
@@ -303,7 +307,7 @@ static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
dev_dbg(dwmac->dev, "Mode %s", phy_modes(plat_dat->mac_interface));
return regmap_update_bits(dwmac->regmap, reg,
- dwmac->ops->syscfg_eth_mask, val << 23);
+ SYSCFG_MCU_ETH_MASK, val << 23);
}
static void stm32_dwmac_clk_disable(struct stm32_dwmac *dwmac, bool suspend)
@@ -348,8 +352,15 @@ static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
return PTR_ERR(dwmac->regmap);
err = of_property_read_u32_index(np, "st,syscon", 1, &dwmac->mode_reg);
- if (err)
+ if (err) {
dev_err(dev, "Can't get sysconfig mode offset (%d)\n", err);
+ return err;
+ }
+
+ dwmac->mode_mask = SYSCFG_MP1_ETH_MASK;
+ err = of_property_read_u32_index(np, "st,syscon", 2, &dwmac->mode_mask);
+ if (err)
+ pr_debug("Warning sysconfig register mask not set\n");
return err;
}
@@ -540,8 +551,7 @@ static SIMPLE_DEV_PM_OPS(stm32_dwmac_pm_ops,
stm32_dwmac_suspend, stm32_dwmac_resume);
static struct stm32_ops stm32mcu_dwmac_data = {
- .set_mode = stm32mcu_set_mode,
- .syscfg_eth_mask = SYSCFG_MCU_ETH_MASK
+ .set_mode = stm32mcu_set_mode
};
static struct stm32_ops stm32mp1_dwmac_data = {
@@ -549,7 +559,7 @@ static struct stm32_ops stm32mp1_dwmac_data = {
.suspend = stm32mp1_suspend,
.resume = stm32mp1_resume,
.parse_data = stm32mp1_parse_data,
- .syscfg_eth_mask = SYSCFG_MP1_ETH_MASK,
+ .syscfg_clr_off = 0x44,
.clk_rx_enable_in_suspend = true
};
Add possibility to have second argument in syscon property to manage mask. This mask will be used to address right BITFIELDS of PMCR register. Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> --- .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 28 +++++++++++++------ 1 file changed, 19 insertions(+), 9 deletions(-)