diff mbox series

[net-next,v3,4/4] net: phy: aquantia: add support for aqr115c

Message ID 20240703181132.28374-5-brgl@bgdev.pl (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series net: phy: aquantia: enable support for aqr115c | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/apply fail Patch does not apply to net-next-0

Commit Message

Bartosz Golaszewski July 3, 2024, 6:11 p.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add support for a new model to the Aquantia driver. This PHY supports
2.5 gigabit speeds. The PHY mode is referred to by the manufacturer as
Overclocked SGMII (OCSGMII) but this actually is just 2500BASEX without
in-band signalling so reuse the existing mode to avoid changing the
uAPI.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/net/phy/aquantia/aquantia_main.c | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 2c8ba2725a91..d12e35374231 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -29,6 +29,7 @@ 
 #define PHY_ID_AQR113	0x31c31c40
 #define PHY_ID_AQR113C	0x31c31c12
 #define PHY_ID_AQR114C	0x31c31c22
+#define PHY_ID_AQR115C	0x31c31c33
 #define PHY_ID_AQR813	0x31c31cb2
 
 #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
@@ -1005,6 +1006,30 @@  static struct phy_driver aqr_driver[] = {
 	.led_hw_control_get = aqr_phy_led_hw_control_get,
 	.led_polarity_set = aqr_phy_led_polarity_set,
 },
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR115C),
+	.name           = "Aquantia AQR115C",
+	.probe          = aqr107_probe,
+	.get_rate_matching = aqr107_get_rate_matching,
+	.config_init    = aqr113c_config_init,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr    = aqr_config_intr,
+	.handle_interrupt = aqr_handle_interrupt,
+	.read_status    = aqr107_read_status,
+	.get_tunable    = aqr107_get_tunable,
+	.set_tunable    = aqr107_set_tunable,
+	.suspend        = aqr107_suspend,
+	.resume         = aqr107_resume,
+	.get_sset_count = aqr107_get_sset_count,
+	.get_strings    = aqr107_get_strings,
+	.get_stats      = aqr107_get_stats,
+	.link_change_notify = aqr107_link_change_notify,
+	.led_brightness_set = aqr_phy_led_brightness_set,
+	.led_hw_is_supported = aqr_phy_led_hw_is_supported,
+	.led_hw_control_set = aqr_phy_led_hw_control_set,
+	.led_hw_control_get = aqr_phy_led_hw_control_get,
+	.led_polarity_set = aqr_phy_led_polarity_set,
+},
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR813),
 	.name		= "Aquantia AQR813",
@@ -1048,6 +1073,7 @@  static struct mdio_device_id __maybe_unused aqr_tbl[] = {
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR115C) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
 	{ }
 };