Message ID | 20240705-btaml-v1-1-7f1538f98cef@amlogic.com (mailing list archive) |
---|---|
State | Awaiting Upstream |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | Add support for Amlogic HCI UART | expand |
Context | Check | Description |
---|---|---|
netdev/tree_selection | success | Not a local patch |
On 05/07/2024 13:20, Yang Li via B4 Relay wrote: > From: Yang Li <yang.li@amlogic.com> > > Add binding document for Amlogic Bluetooth chipsets attached over UART. > > Signed-off-by: Yang Li <yang.li@amlogic.com> > --- > .../bindings/net/bluetooth/amlogic,w155s2-bt.yaml | 62 ++++++++++++++++++++++ > 1 file changed, 62 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml > new file mode 100644 > index 000000000000..d59e3206af62 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml > @@ -0,0 +1,62 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2024 Amlogic, Inc. All rights reserved > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/bluetooth/amlogic,w155s2-bt.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Amlogic Bluetooth chips > + > +description: > + This binding describes UART-attached Amlogic bluetooth chips. Do not say that binding describes a binding. It is not helpful. Describe the hardware instead. > + > +maintainers: > + - Yang Li <yang.li@amlogic.com> > + > +properties: > + compatible: > + oneOf: > + - const: amlogic,w155s2-bt > + - items: > + - enum: > + - amlogic,w265s1-bt > + - amlogic,w265p1-bt > + - amlogic,w265s2-bt > + - const: amlogic,w155s2-bt > + > + amlogic,wcn-pwrseq: ?? > + default: 0 > + description: specify the power sequence used to power on Bluetooth > + $ref: /schemas/types.yaml#/definitions/uint32 What? I have no clue what is this and have no clue what to say here. Drop. > + > + amlogic,firmware: > + description: specify the path of firmware bin to load > + $ref: /schemas/types.yaml#/definitions/string-array Srsly, it's third case in your bindings. Do not re-invent the wheel but use existing, common properties. How to find them? Well, git grep or ask your colleagues... > + > + amlogic,antenna-number: > + default: 1 > + description: number of antenna Useless description. Do not repeat the property name but explain what is it and how it is used. Or drop the property. > + $ref: /schemas/types.yaml#/definitions/uint32 > + > + amlogic,a2dp-sink-enable: > + default: 0 > + description: enable sink mode with controller Again, not possible to figure out. NAK > + $ref: /schemas/types.yaml#/definitions/uint32 > + > +required: > + - compatible > + - amlogic,wcn-pwrseq > + - amlogic,firmware > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + serial { Drop > + bluetooth { > + compatible = "amlogic,w155s2-bt"; > + amlogic,wcn-pwrseq = <1>; Joking, right? Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml new file mode 100644 index 000000000000..d59e3206af62 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2024 Amlogic, Inc. All rights reserved +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/amlogic,w155s2-bt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Bluetooth chips + +description: + This binding describes UART-attached Amlogic bluetooth chips. + +maintainers: + - Yang Li <yang.li@amlogic.com> + +properties: + compatible: + oneOf: + - const: amlogic,w155s2-bt + - items: + - enum: + - amlogic,w265s1-bt + - amlogic,w265p1-bt + - amlogic,w265s2-bt + - const: amlogic,w155s2-bt + + amlogic,wcn-pwrseq: + default: 0 + description: specify the power sequence used to power on Bluetooth + $ref: /schemas/types.yaml#/definitions/uint32 + + amlogic,firmware: + description: specify the path of firmware bin to load + $ref: /schemas/types.yaml#/definitions/string-array + + amlogic,antenna-number: + default: 1 + description: number of antenna + $ref: /schemas/types.yaml#/definitions/uint32 + + amlogic,a2dp-sink-enable: + default: 0 + description: enable sink mode with controller + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - amlogic,wcn-pwrseq + - amlogic,firmware + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + bluetooth { + compatible = "amlogic,w155s2-bt"; + amlogic,wcn-pwrseq = <1>; + amlogic,firmware = "amlogic/aml_w155s2_bt_uart.bin"; + }; + };