@@ -12,8 +12,14 @@
#include <linux/of.h>
#include <dt-bindings/net/microchip-lan78xx.h>
+#define PHY_ID_LAN937X_TX 0x0007c190
+
+#define LAN937X_MODE_CTRL_STATUS_REG 0x11
+#define LAN937X_AUTOMDIX_EN BIT(7)
+#define LAN937X_MDI_MODE BIT(6)
+
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
-#define DRIVER_DESC "Microchip LAN88XX PHY driver"
+#define DRIVER_DESC "Microchip LAN88XX/LAN937X TX PHY driver"
struct lan88xx_priv {
int chip_id;
@@ -373,6 +379,115 @@ static void lan88xx_link_change_notify(struct phy_device *phydev)
}
}
+/**
+ * lan937x_tx_read_mdix_status - Read the MDIX status for the LAN937x TX PHY.
+ * @phydev: Pointer to the phy_device structure.
+ *
+ * This function reads the MDIX status of the LAN937x TX PHY and sets the
+ * mdix_ctrl and mdix fields of the phy_device structure accordingly.
+ * Note that MDIX status is not supported in AUTO mode, and will be set
+ * to invalid in such cases.
+ *
+ * Return: 0 on success, a negative error code on failure.
+ */
+static int lan937x_tx_read_mdix_status(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, LAN937X_MODE_CTRL_STATUS_REG);
+ if (ret < 0)
+ return ret;
+
+ if (ret & LAN937X_AUTOMDIX_EN) {
+ phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+ /* MDI/MDIX status is unknown */
+ phydev->mdix = ETH_TP_MDI_INVALID;
+ } else if (ret & LAN937X_MDI_MODE) {
+ phydev->mdix_ctrl = ETH_TP_MDI_X;
+ phydev->mdix = ETH_TP_MDI_X;
+ } else {
+ phydev->mdix_ctrl = ETH_TP_MDI;
+ phydev->mdix = ETH_TP_MDI;
+ }
+
+ return 0;
+}
+
+/**
+ * lan937x_tx_read_status - Read the status for the LAN937x TX PHY.
+ * @phydev: Pointer to the phy_device structure.
+ *
+ * This function reads the status of the LAN937x TX PHY and updates the
+ * phy_device structure accordingly.
+ *
+ * Return: 0 on success, a negative error code on failure.
+ */
+static int lan937x_tx_read_status(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_read_status(phydev);
+ if (ret < 0)
+ return ret;
+
+ return lan937x_tx_read_mdix_status(phydev);
+}
+
+/**
+ * lan937x_tx_set_mdix - Set the MDIX mode for the LAN937x TX PHY.
+ * @phydev: Pointer to the phy_device structure.
+ *
+ * This function configures the MDIX mode of the LAN937x TX PHY based on the
+ * mdix_ctrl field of the phy_device structure. The MDIX mode can be set to
+ * MDI (straight-through), MDIX (crossover), or AUTO (auto-MDIX). If the mode
+ * is not recognized, it returns 0 without making any changes.
+ *
+ * Return: 0 on success, a negative error code on failure.
+ */
+static int lan937x_tx_set_mdix(struct phy_device *phydev)
+{
+ u16 val;
+
+ switch (phydev->mdix_ctrl) {
+ case ETH_TP_MDI:
+ val = 0;
+ break;
+ case ETH_TP_MDI_X:
+ val = LAN937X_MDI_MODE;
+ break;
+ case ETH_TP_MDI_AUTO:
+ val = LAN937X_AUTOMDIX_EN;
+ break;
+ default:
+ return 0;
+ }
+
+ return phy_modify(phydev, LAN937X_MODE_CTRL_STATUS_REG,
+ LAN937X_AUTOMDIX_EN | LAN937X_MDI_MODE, val);
+}
+
+/**
+ * lan937x_tx_config_aneg - Configure auto-negotiation and fixed modes for the
+ * LAN937x TX PHY.
+ * @phydev: Pointer to the phy_device structure.
+ *
+ * This function configures the MDIX mode for the LAN937x TX PHY and then
+ * proceeds to configure the auto-negotiation or fixed mode settings
+ * based on the phy_device structure.
+ *
+ * Return: 0 on success, a negative error code on failure.
+ */
+static int lan937x_tx_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = lan937x_tx_set_mdix(phydev);
+ if (ret < 0)
+ return ret;
+
+ return genphy_config_aneg(phydev);
+}
+
static struct phy_driver microchip_phy_driver[] = {
{
.phy_id = 0x0007c132,
@@ -400,12 +515,21 @@ static struct phy_driver microchip_phy_driver[] = {
.set_wol = lan88xx_set_wol,
.read_page = lan88xx_read_page,
.write_page = lan88xx_write_page,
+},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_LAN937X_TX),
+ .name = "Microchip LAN937x TX",
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .config_aneg = lan937x_tx_config_aneg,
+ .read_status = lan937x_tx_read_status,
} };
module_phy_driver(microchip_phy_driver);
static struct mdio_device_id __maybe_unused microchip_tbl[] = {
{ 0x0007c132, 0xfffffff2 },
+ { PHY_ID_MATCH_MODEL(PHY_ID_LAN937X_TX) },
{ }
};