diff mbox series

[v2,7/7] arm64: dts: ti: k3-am62p-mcu: Mark mcu_mcan0/1 as wakeup-source

Message ID 20240729074135.3850634-8-msp@baylibre.com (mailing list archive)
State Not Applicable
Headers show
Series can: m_can: Add am62 wakeup support | expand

Checks

Context Check Description
netdev/tree_selection success Series ignored based on subject

Commit Message

Markus Schneider-Pargmann July 29, 2024, 7:41 a.m. UTC 
From: Vibhore Vardhan <vibhore@ti.com>

mcu_mcan0 and mcu_mcan1 can be wakeup sources for the SoC. Mark them
accordingly in the devicetree. Based on the patch for AM62a.

Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
index e65db6ce02bf..d6eccaea7a46 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
@@ -171,6 +171,7 @@  mcu_mcan0: can@4e08000 {
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
+		wakeup-source;
 		status = "disabled";
 	};
 
@@ -186,6 +187,7 @@  mcu_mcan1: can@4e18000 {
 		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
+		wakeup-source;
 		status = "disabled";
 	};