@@ -117,6 +117,7 @@ static void free_long_term_buff(struct ibmvnic_adapter *adapter,
struct ibmvnic_long_term_buff *ltb);
static void ibmvnic_disable_irqs(struct ibmvnic_adapter *adapter);
static void flush_reset_queue(struct ibmvnic_adapter *adapter);
+static void print_subcrq_error(struct device *dev, int rc, const char *func);
struct ibmvnic_stat {
char name[ETH_GSTRING_LEN];
@@ -2331,8 +2332,29 @@ static void ibmvnic_tx_scrq_clean_buffer(struct ibmvnic_adapter *adapter,
}
}
+static int send_subcrq_direct(struct ibmvnic_adapter *adapter,
+ u64 remote_handle, u64 *entry)
+{
+ unsigned int ua = adapter->vdev->unit_address;
+ struct device *dev = &adapter->vdev->dev;
+ int rc;
+
+ /* Make sure the hypervisor sees the complete request */
+ dma_wmb();
+ rc = plpar_hcall_norets(H_SEND_SUB_CRQ, ua,
+ cpu_to_be64(remote_handle),
+ cpu_to_be64(entry[0]), cpu_to_be64(entry[1]),
+ cpu_to_be64(entry[2]), cpu_to_be64(entry[3]));
+
+ if (rc)
+ print_subcrq_error(dev, rc, __func__);
+
+ return rc;
+}
+
static int ibmvnic_tx_scrq_flush(struct ibmvnic_adapter *adapter,
- struct ibmvnic_sub_crq_queue *tx_scrq)
+ struct ibmvnic_sub_crq_queue *tx_scrq,
+ bool indirect)
{
struct ibmvnic_ind_xmit_queue *ind_bufp;
u64 dma_addr;
@@ -2347,7 +2369,13 @@ static int ibmvnic_tx_scrq_flush(struct ibmvnic_adapter *adapter,
if (!entries)
return 0;
- rc = send_subcrq_indirect(adapter, handle, dma_addr, entries);
+
+ if (indirect)
+ rc = send_subcrq_indirect(adapter, handle, dma_addr, entries);
+ else
+ rc = send_subcrq_direct(adapter, handle,
+ (u64 *)ind_bufp->indir_arr);
+
if (rc)
ibmvnic_tx_scrq_clean_buffer(adapter, tx_scrq);
else
@@ -2405,7 +2433,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
tx_dropped++;
tx_send_failed++;
ret = NETDEV_TX_OK;
- lpar_rc = ibmvnic_tx_scrq_flush(adapter, tx_scrq);
+ lpar_rc = ibmvnic_tx_scrq_flush(adapter, tx_scrq, true);
if (lpar_rc != H_SUCCESS)
goto tx_err;
goto out;
@@ -2423,7 +2451,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
tx_send_failed++;
tx_dropped++;
ret = NETDEV_TX_OK;
- lpar_rc = ibmvnic_tx_scrq_flush(adapter, tx_scrq);
+ lpar_rc = ibmvnic_tx_scrq_flush(adapter, tx_scrq, true);
if (lpar_rc != H_SUCCESS)
goto tx_err;
goto out;
@@ -2518,6 +2546,16 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
tx_crq.v1.flags1 |= IBMVNIC_TX_LSO;
tx_crq.v1.mss = cpu_to_be16(skb_shinfo(skb)->gso_size);
hdrs += 2;
+ } else if (!ind_bufp->index && !netdev_xmit_more()) {
+ ind_bufp->indir_arr[0] = tx_crq;
+ ind_bufp->index = 1;
+ tx_buff->num_entries = 1;
+ netdev_tx_sent_queue(txq, skb->len);
+ lpar_rc = ibmvnic_tx_scrq_flush(adapter, tx_scrq, false);
+ if (lpar_rc != H_SUCCESS)
+ goto tx_err;
+
+ goto early_exit;
}
if ((*hdrs >> 7) & 1)
@@ -2527,7 +2565,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
tx_buff->num_entries = num_entries;
/* flush buffer if current entry can not fit */
if (num_entries + ind_bufp->index > IBMVNIC_MAX_IND_DESCS) {
- lpar_rc = ibmvnic_tx_scrq_flush(adapter, tx_scrq);
+ lpar_rc = ibmvnic_tx_scrq_flush(adapter, tx_scrq, true);
if (lpar_rc != H_SUCCESS)
goto tx_flush_err;
}
@@ -2535,15 +2573,17 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
indir_arr[0] = tx_crq;
memcpy(&ind_bufp->indir_arr[ind_bufp->index], &indir_arr[0],
num_entries * sizeof(struct ibmvnic_generic_scrq));
+
ind_bufp->index += num_entries;
if (__netdev_tx_sent_queue(txq, skb->len,
netdev_xmit_more() &&
ind_bufp->index < IBMVNIC_MAX_IND_DESCS)) {
- lpar_rc = ibmvnic_tx_scrq_flush(adapter, tx_scrq);
+ lpar_rc = ibmvnic_tx_scrq_flush(adapter, tx_scrq, true);
if (lpar_rc != H_SUCCESS)
goto tx_err;
}
+early_exit:
if (atomic_add_return(num_entries, &tx_scrq->used)
>= adapter->req_tx_entries_per_subcrq) {
netdev_dbg(netdev, "Stopping queue %d\n", queue_num);
Firmware supports two hcalls to send a sub-crq request: H_SEND_SUB_CRQ_INDIRECT and H_SEND_SUB_CRQ. The indirect hcall allows for submission of batched messages while the other hcall is limited to only one message. This protocol is defined in PAPR section 17.2.3.3. Previously, the ibmvnic xmit function only used the indirect hcall. This allowed the driver to batch it's skbs. A single skb can occupy a few entries per hcall depending on if FW requires skb header information or not. The FW only needs header information if the packet is segmented. By this logic, if an skb is not GSO then it can fit in one sub-crq message and therefore is a candidate for H_SEND_SUB_CRQ. Batching skb transmission is only useful when there are more packets coming down the line (ie netdev_xmit_more is true). As it turns out, H_SEND_SUB_CRQ induces less latency than H_SEND_SUB_CRQ_INDIRECT. Therefore, use H_SEND_SUB_CRQ where appropriate. Small latency gains seen when doing TCP_RR_150 (request/response workload). Ftrace results (graph-time=1): Previous: ibmvnic_xmit = 29618270.83 us / 8860058.0 hits = AVG 3.34 ibmvnic_tx_scrq_flush = 21972231.02 us / 6553972.0 hits = AVG 3.35 Now: ibmvnic_xmit = 22153350.96 us / 8438942.0 hits = AVG 2.63 ibmvnic_tx_scrq_flush = 15858922.4 us / 6244076.0 hits = AVG 2.54 Signed-off-by: Nick Child <nnac123@linux.ibm.com> --- drivers/net/ethernet/ibm/ibmvnic.c | 52 ++++++++++++++++++++++++++---- 1 file changed, 46 insertions(+), 6 deletions(-)