From patchwork Tue Aug 13 14:27:36 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pieter X-Patchwork-Id: 13762124 X-Patchwork-Delegate: kuba@kernel.org Received: from mail-ed1-f48.google.com (mail-ed1-f48.google.com [209.85.208.48]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1CF6B19D084; Tue, 13 Aug 2024 14:28:25 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.208.48 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723559308; cv=none; b=pxe1blfC+i+bO0fPv9YB72W9uGuQwfAiJaz1kNPrJUhv6XC1LxCO/r2IWPDMSRbLc0/2NC+jSK3bkLSfplPjZOyQRn4r+Tk5CT1EAvUPIoJAwX8ni35faJy7Hhbk4oOFRawuE7x6qEQrJFYYHVj6KU8cBQcymAn2cfWv9dUao/8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723559308; c=relaxed/simple; bh=cI6omaOq9q4KhDAhVFNb9BhAcM5gxFkHis/LHpaLAfM=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=JdiBnQKL2t81BlZYG2Kcw1hy9ZlcQxvMBp0UULWWdW1np+Nbb7jk70OQ+eqkhLAhFURTJXJpzc+1VbjOaIoSlrYyeV3rdGbHYfebpso1SaRaCye6rwbWomXLvJJ0yOIZH4Cbm9qxUkSIFuqFCsuVz0cOCPlGmqcbby2x6pg9LOU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=VWbJKIvj; arc=none smtp.client-ip=209.85.208.48 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="VWbJKIvj" Received: by mail-ed1-f48.google.com with SMTP id 4fb4d7f45d1cf-5b3fff87e6bso6353211a12.0; Tue, 13 Aug 2024 07:28:25 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1723559304; x=1724164104; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=QtypSQS+aXP13D2w8C4F/ewwCPIeElIJUsVeuF/Dd8g=; b=VWbJKIvjmzh9OEmWv2+zhXpNGW/7g4fdAA9csmeL5eA8bexGS/ndGFhajd1vv9Xj7I l2WI7NrEL7onhv+wepbB6FQ0J3MtfOdyD+68GiLl0LxjlKER70yDbJOWy4tKnU3Gq1ns OuhCWeOT1X2m5iHPKxYf7/CvPgN95eqwhCh1BFkl+VSQBb9BXd4/TvEs8UFI7wjwYHMl QaGfQNSGNLxo22Y5Jm67IjtFeSdsnjCS3QxDKMboWChK8dK0h5fU2JvPjrxpbueujff6 DXWViigCG+yyE7f75a6cxYg0n5Q0I5gTqyqMb8NyIjQogcU9BsDEJx2beFk5SBT9JraZ +MKw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1723559304; x=1724164104; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=QtypSQS+aXP13D2w8C4F/ewwCPIeElIJUsVeuF/Dd8g=; b=K8MlX8mx2jkMviC4+4rkr/K4DHcIoG3ge0P0vW4DQDfVaWeV4O+b+45+7EaHuu2oqK N65iKMkVpCJZdZg2f0E3iqiY3SGHdq4NIwhhUjlvQyE0WF8dINZGJiUJXWESAP0Bb6Fn Vqitm/iGAi1UtQySJz2iRYTxatMdgfVeDb82UaTMXwnmfzT9UB2Jbt199v0pO7oeRirA 8En145k7Pglx9mozByvZI4wTgaTsQuR0ChJnUiQ6SEDJ1OAf3QeDE8a5CaNg/SXkLAt7 eMWiJWQ7nA75VVLaJ0nCp9IP0QEpLBVSx8QCAV02Jik5eH8cL8+Qh1RSxhQULGxNdkrq 6kvw== X-Forwarded-Encrypted: i=1; AJvYcCVIbaxPYUIAslbtvhDoW0Uw2lN3yvTjN50y533yrA3/WF2y/rjytvMQlzDAuVdDmH1hHIaMMDdTjT8eSxpnbPctpzM4O9+kI5YDZHlHMbiISQkRQsZn1szLAvT7W/ilewPDqcjyMdQPhKkrvKNtCY4z4RfxHdLGUUrL3zxHpW1JTQ== X-Gm-Message-State: AOJu0Yzp73F5e8lW8FfTCrkYllKk1CQenp5EitQlJx2FNs51fB3AjJB9 knpqWMMgGidoC/Ip+SNICCB94abSihFHLHAf1GnmVyyI6XCga5s+ X-Google-Smtp-Source: AGHT+IHqWWbBZlEjzJR03DBuaAlxXPlEoOAJKYgG0E4nXj6Qrlw289MRxOOuFBLPAMwcFtDIZDVw0w== X-Received: by 2002:a17:907:3fa3:b0:a7d:c9fa:e3b3 with SMTP id a640c23a62f3a-a80ed2ca647mr258635066b.54.1723559304008; Tue, 13 Aug 2024 07:28:24 -0700 (PDT) Received: from lapsy144.cern.ch (lapsy144.ipv6.cern.ch. [2001:1458:202:99::100:4b]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a80f3fa7c27sm74345166b.66.2024.08.13.07.28.23 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 13 Aug 2024 07:28:23 -0700 (PDT) From: vtpieter@gmail.com To: Woojung Huh , UNGLinuxDriver@microchip.com, Andrew Lunn , Florian Fainelli , Vladimir Oltean , David S Miller , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Marek Vasut Cc: Woojung Huh , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Pieter Van Trappen , Arun Ramadoss Subject: [PATCH net-next v6 2/6] net: dsa: microchip: move KSZ9477 WoL functions to ksz_common Date: Tue, 13 Aug 2024 16:27:36 +0200 Message-ID: <20240813142750.772781-3-vtpieter@gmail.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240813142750.772781-1-vtpieter@gmail.com> References: <20240813142750.772781-1-vtpieter@gmail.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Patchwork-Delegate: kuba@kernel.org From: Pieter Van Trappen Move KSZ9477 WoL functions to ksz_common, in preparation for adding KSZ87xx family support. Signed-off-by: Pieter Van Trappen Acked-by: Arun Ramadoss --- drivers/net/dsa/microchip/ksz9477.c | 181 ------------------------ drivers/net/dsa/microchip/ksz9477.h | 5 - drivers/net/dsa/microchip/ksz9477_reg.h | 12 -- drivers/net/dsa/microchip/ksz_common.c | 181 ++++++++++++++++++++++++ drivers/net/dsa/microchip/ksz_common.h | 19 +++ 5 files changed, 200 insertions(+), 198 deletions(-) diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 1e2293aa00dc..4defa7c03176 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -56,187 +56,6 @@ int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu) REG_SW_MTU_MASK, frame_size); } -/** - * ksz9477_handle_wake_reason - Handle wake reason on a specified port. - * @dev: The device structure. - * @port: The port number. - * - * This function reads the PME (Power Management Event) status register of a - * specified port to determine the wake reason. If there is no wake event, it - * returns early. Otherwise, it logs the wake reason which could be due to a - * "Magic Packet", "Link Up", or "Energy Detect" event. The PME status register - * is then cleared to acknowledge the handling of the wake event. - * - * Return: 0 on success, or an error code on failure. - */ -static int ksz9477_handle_wake_reason(struct ksz_device *dev, int port) -{ - u8 pme_status; - int ret; - - ret = ksz_pread8(dev, port, REG_PORT_PME_STATUS, &pme_status); - if (ret) - return ret; - - if (!pme_status) - return 0; - - dev_dbg(dev->dev, "Wake event on port %d due to:%s%s%s\n", port, - pme_status & PME_WOL_MAGICPKT ? " \"Magic Packet\"" : "", - pme_status & PME_WOL_LINKUP ? " \"Link Up\"" : "", - pme_status & PME_WOL_ENERGY ? " \"Energy detect\"" : ""); - - return ksz_pwrite8(dev, port, REG_PORT_PME_STATUS, pme_status); -} - -/** - * ksz9477_get_wol - Get Wake-on-LAN settings for a specified port. - * @dev: The device structure. - * @port: The port number. - * @wol: Pointer to ethtool Wake-on-LAN settings structure. - * - * This function checks the PME Pin Control Register to see if PME Pin Output - * Enable is set, indicating PME is enabled. If enabled, it sets the supported - * and active WoL flags. - */ -void ksz9477_get_wol(struct ksz_device *dev, int port, - struct ethtool_wolinfo *wol) -{ - u8 pme_ctrl; - int ret; - - if (!dev->wakeup_source) - return; - - wol->supported = WAKE_PHY; - - /* Check if the current MAC address on this port can be set - * as global for WAKE_MAGIC support. The result may vary - * dynamically based on other ports configurations. - */ - if (ksz_is_port_mac_global_usable(dev->ds, port)) - wol->supported |= WAKE_MAGIC; - - ret = ksz_pread8(dev, port, REG_PORT_PME_CTRL, &pme_ctrl); - if (ret) - return; - - if (pme_ctrl & PME_WOL_MAGICPKT) - wol->wolopts |= WAKE_MAGIC; - if (pme_ctrl & (PME_WOL_LINKUP | PME_WOL_ENERGY)) - wol->wolopts |= WAKE_PHY; -} - -/** - * ksz9477_set_wol - Set Wake-on-LAN settings for a specified port. - * @dev: The device structure. - * @port: The port number. - * @wol: Pointer to ethtool Wake-on-LAN settings structure. - * - * This function configures Wake-on-LAN (WoL) settings for a specified port. - * It validates the provided WoL options, checks if PME is enabled via the - * switch's PME Pin Control Register, clears any previous wake reasons, - * and sets the Magic Packet flag in the port's PME control register if - * specified. - * - * Return: 0 on success, or other error codes on failure. - */ -int ksz9477_set_wol(struct ksz_device *dev, int port, - struct ethtool_wolinfo *wol) -{ - u8 pme_ctrl = 0, pme_ctrl_old = 0; - bool magic_switched_off; - bool magic_switched_on; - int ret; - - if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC)) - return -EINVAL; - - if (!dev->wakeup_source) - return -EOPNOTSUPP; - - ret = ksz9477_handle_wake_reason(dev, port); - if (ret) - return ret; - - if (wol->wolopts & WAKE_MAGIC) - pme_ctrl |= PME_WOL_MAGICPKT; - if (wol->wolopts & WAKE_PHY) - pme_ctrl |= PME_WOL_LINKUP | PME_WOL_ENERGY; - - ret = ksz_pread8(dev, port, REG_PORT_PME_CTRL, &pme_ctrl_old); - if (ret) - return ret; - - if (pme_ctrl_old == pme_ctrl) - return 0; - - magic_switched_off = (pme_ctrl_old & PME_WOL_MAGICPKT) && - !(pme_ctrl & PME_WOL_MAGICPKT); - magic_switched_on = !(pme_ctrl_old & PME_WOL_MAGICPKT) && - (pme_ctrl & PME_WOL_MAGICPKT); - - /* To keep reference count of MAC address, we should do this - * operation only on change of WOL settings. - */ - if (magic_switched_on) { - ret = ksz_switch_macaddr_get(dev->ds, port, NULL); - if (ret) - return ret; - } else if (magic_switched_off) { - ksz_switch_macaddr_put(dev->ds); - } - - ret = ksz_pwrite8(dev, port, REG_PORT_PME_CTRL, pme_ctrl); - if (ret) { - if (magic_switched_on) - ksz_switch_macaddr_put(dev->ds); - return ret; - } - - return 0; -} - -/** - * ksz9477_wol_pre_shutdown - Prepares the switch device for shutdown while - * considering Wake-on-LAN (WoL) settings. - * @dev: The switch device structure. - * @wol_enabled: Pointer to a boolean which will be set to true if WoL is - * enabled on any port. - * - * This function prepares the switch device for a safe shutdown while taking - * into account the Wake-on-LAN (WoL) settings on the user ports. It updates - * the wol_enabled flag accordingly to reflect whether WoL is active on any - * port. - */ -void ksz9477_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled) -{ - struct dsa_port *dp; - int ret; - - *wol_enabled = false; - - if (!dev->wakeup_source) - return; - - dsa_switch_for_each_user_port(dp, dev->ds) { - u8 pme_ctrl = 0; - - ret = ksz_pread8(dev, dp->index, REG_PORT_PME_CTRL, &pme_ctrl); - if (!ret && pme_ctrl) - *wol_enabled = true; - - /* make sure there are no pending wake events which would - * prevent the device from going to sleep/shutdown. - */ - ksz9477_handle_wake_reason(dev, dp->index); - } - - /* Now we are save to enable PME pin. */ - if (*wol_enabled) - ksz_write8(dev, REG_SW_PME_CTRL, PME_ENABLE); -} - static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev) { unsigned int val; diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h index 239a281da10b..d2166b0d881e 100644 --- a/drivers/net/dsa/microchip/ksz9477.h +++ b/drivers/net/dsa/microchip/ksz9477.h @@ -60,11 +60,6 @@ void ksz9477_switch_exit(struct ksz_device *dev); void ksz9477_port_queue_split(struct ksz_device *dev, int port); void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr); void ksz9477_hsr_leave(struct dsa_switch *ds, int port, struct net_device *hsr); -void ksz9477_get_wol(struct ksz_device *dev, int port, - struct ethtool_wolinfo *wol); -int ksz9477_set_wol(struct ksz_device *dev, int port, - struct ethtool_wolinfo *wol); -void ksz9477_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled); int ksz9477_port_acl_init(struct ksz_device *dev, int port); void ksz9477_port_acl_free(struct ksz_device *dev, int port); diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h index d5354c600ea1..04235c22bf40 100644 --- a/drivers/net/dsa/microchip/ksz9477_reg.h +++ b/drivers/net/dsa/microchip/ksz9477_reg.h @@ -38,11 +38,6 @@ #define SWITCH_REVISION_S 4 #define SWITCH_RESET 0x01 -#define REG_SW_PME_CTRL 0x0006 - -#define PME_ENABLE BIT(1) -#define PME_POLARITY BIT(0) - #define REG_GLOBAL_OPTIONS 0x000F #define SW_GIGABIT_ABLE BIT(6) @@ -807,13 +802,6 @@ #define REG_PORT_AVB_SR_1_TYPE 0x0008 #define REG_PORT_AVB_SR_2_TYPE 0x000A -#define REG_PORT_PME_STATUS 0x0013 -#define REG_PORT_PME_CTRL 0x0017 - -#define PME_WOL_MAGICPKT BIT(2) -#define PME_WOL_LINKUP BIT(1) -#define PME_WOL_ENERGY BIT(0) - #define REG_PORT_INT_STATUS 0x001B #define REG_PORT_INT_MASK 0x001F diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 1491099528be..7afe958d0e21 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -3751,6 +3751,77 @@ static void ksz_get_wol(struct dsa_switch *ds, int port, dev->dev_ops->get_wol(dev, port, wol); } +/** + * ksz9477_handle_wake_reason - Handle wake reason on a specified port. + * @dev: The device structure. + * @port: The port number. + * + * This function reads the PME (Power Management Event) status register of a + * specified port to determine the wake reason. If there is no wake event, it + * returns early. Otherwise, it logs the wake reason which could be due to a + * "Magic Packet", "Link Up", or "Energy Detect" event. The PME status register + * is then cleared to acknowledge the handling of the wake event. + * + * Return: 0 on success, or an error code on failure. + */ +int ksz9477_handle_wake_reason(struct ksz_device *dev, int port) +{ + u8 pme_status; + int ret; + + ret = ksz_pread8(dev, port, REG_PORT_PME_STATUS, &pme_status); + if (ret) + return ret; + + if (!pme_status) + return 0; + + dev_dbg(dev->dev, "Wake event on port %d due to:%s%s%s\n", port, + pme_status & PME_WOL_MAGICPKT ? " \"Magic Packet\"" : "", + pme_status & PME_WOL_LINKUP ? " \"Link Up\"" : "", + pme_status & PME_WOL_ENERGY ? " \"Energy detect\"" : ""); + + return ksz_pwrite8(dev, port, REG_PORT_PME_STATUS, pme_status); +} + +/** + * ksz9477_get_wol - Get Wake-on-LAN settings for a specified port. + * @dev: The device structure. + * @port: The port number. + * @wol: Pointer to ethtool Wake-on-LAN settings structure. + * + * This function checks the PME Pin Control Register to see if PME Pin Output + * Enable is set, indicating PME is enabled. If enabled, it sets the supported + * and active WoL flags. + */ +void ksz9477_get_wol(struct ksz_device *dev, int port, + struct ethtool_wolinfo *wol) +{ + u8 pme_ctrl; + int ret; + + if (!dev->wakeup_source) + return; + + wol->supported = WAKE_PHY; + + /* Check if the current MAC address on this port can be set + * as global for WAKE_MAGIC support. The result may vary + * dynamically based on other ports configurations. + */ + if (ksz_is_port_mac_global_usable(dev->ds, port)) + wol->supported |= WAKE_MAGIC; + + ret = ksz_pread8(dev, port, REG_PORT_PME_CTRL, &pme_ctrl); + if (ret) + return; + + if (pme_ctrl & PME_WOL_MAGICPKT) + wol->wolopts |= WAKE_MAGIC; + if (pme_ctrl & (PME_WOL_LINKUP | PME_WOL_ENERGY)) + wol->wolopts |= WAKE_PHY; +} + static int ksz_set_wol(struct dsa_switch *ds, int port, struct ethtool_wolinfo *wol) { @@ -3762,6 +3833,116 @@ static int ksz_set_wol(struct dsa_switch *ds, int port, return -EOPNOTSUPP; } +/** + * ksz9477_set_wol - Set Wake-on-LAN settings for a specified port. + * @dev: The device structure. + * @port: The port number. + * @wol: Pointer to ethtool Wake-on-LAN settings structure. + * + * This function configures Wake-on-LAN (WoL) settings for a specified port. + * It validates the provided WoL options, checks if PME is enabled via the + * switch's PME Pin Control Register, clears any previous wake reasons, + * and sets the Magic Packet flag in the port's PME control register if + * specified. + * + * Return: 0 on success, or other error codes on failure. + */ +int ksz9477_set_wol(struct ksz_device *dev, int port, + struct ethtool_wolinfo *wol) +{ + u8 pme_ctrl = 0, pme_ctrl_old = 0; + bool magic_switched_off; + bool magic_switched_on; + int ret; + + if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC)) + return -EINVAL; + + if (!dev->wakeup_source) + return -EOPNOTSUPP; + + ret = ksz9477_handle_wake_reason(dev, port); + if (ret) + return ret; + + if (wol->wolopts & WAKE_MAGIC) + pme_ctrl |= PME_WOL_MAGICPKT; + if (wol->wolopts & WAKE_PHY) + pme_ctrl |= PME_WOL_LINKUP | PME_WOL_ENERGY; + + ret = ksz_pread8(dev, port, REG_PORT_PME_CTRL, &pme_ctrl_old); + if (ret) + return ret; + + if (pme_ctrl_old == pme_ctrl) + return 0; + + magic_switched_off = (pme_ctrl_old & PME_WOL_MAGICPKT) && + !(pme_ctrl & PME_WOL_MAGICPKT); + magic_switched_on = !(pme_ctrl_old & PME_WOL_MAGICPKT) && + (pme_ctrl & PME_WOL_MAGICPKT); + + /* To keep reference count of MAC address, we should do this + * operation only on change of WOL settings. + */ + if (magic_switched_on) { + ret = ksz_switch_macaddr_get(dev->ds, port, NULL); + if (ret) + return ret; + } else if (magic_switched_off) { + ksz_switch_macaddr_put(dev->ds); + } + + ret = ksz_pwrite8(dev, port, REG_PORT_PME_CTRL, pme_ctrl); + if (ret) { + if (magic_switched_on) + ksz_switch_macaddr_put(dev->ds); + return ret; + } + + return 0; +} + +/** + * ksz9477_wol_pre_shutdown - Prepares the switch device for shutdown while + * considering Wake-on-LAN (WoL) settings. + * @dev: The switch device structure. + * @wol_enabled: Pointer to a boolean which will be set to true if WoL is + * enabled on any port. + * + * This function prepares the switch device for a safe shutdown while taking + * into account the Wake-on-LAN (WoL) settings on the user ports. It updates + * the wol_enabled flag accordingly to reflect whether WoL is active on any + * port. + */ +void ksz9477_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled) +{ + struct dsa_port *dp; + int ret; + + *wol_enabled = false; + + if (!dev->wakeup_source) + return; + + dsa_switch_for_each_user_port(dp, dev->ds) { + u8 pme_ctrl = 0; + + ret = ksz_pread8(dev, dp->index, REG_PORT_PME_CTRL, &pme_ctrl); + if (!ret && pme_ctrl) + *wol_enabled = true; + + /* make sure there are no pending wake events which would + * prevent the device from going to sleep/shutdown. + */ + ksz9477_handle_wake_reason(dev, dp->index); + } + + /* Now we are save to enable PME pin. */ + if (*wol_enabled) + ksz_write8(dev, REG_SW_PME_CTRL, PME_ENABLE); +} + static int ksz_port_set_mac_address(struct dsa_switch *ds, int port, const unsigned char *addr) { diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index 5f0a628b9849..e35caca96f89 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -391,6 +391,12 @@ int ksz_switch_macaddr_get(struct dsa_switch *ds, int port, struct netlink_ext_ack *extack); void ksz_switch_macaddr_put(struct dsa_switch *ds); void ksz_switch_shutdown(struct ksz_device *dev); +int ksz9477_handle_wake_reason(struct ksz_device *dev, int port); +void ksz9477_get_wol(struct ksz_device *dev, int port, + struct ethtool_wolinfo *wol); +int ksz9477_set_wol(struct ksz_device *dev, int port, + struct ethtool_wolinfo *wol); +void ksz9477_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled); /* Common register access functions */ static inline struct regmap *ksz_regmap_8(struct ksz_device *dev) @@ -695,6 +701,19 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) #define P_MII_MAC_MODE BIT(2) #define P_MII_SEL_M 0x3 +/* KSZ9477, KSZ8795 Wake-on-LAN (WoL) masks */ +#define REG_PORT_PME_STATUS 0x0013 +#define REG_PORT_PME_CTRL 0x0017 + +#define PME_WOL_MAGICPKT BIT(2) +#define PME_WOL_LINKUP BIT(1) +#define PME_WOL_ENERGY BIT(0) + +#define REG_SW_PME_CTRL 0x0006 + +#define PME_ENABLE BIT(1) +#define PME_POLARITY BIT(0) + /* Interrupt */ #define REG_SW_PORT_INT_STATUS__1 0x001B #define REG_SW_PORT_INT_MASK__1 0x001F