@@ -174,12 +174,17 @@ fib_rule6_test_match_n_redirect()
{
local match="$1"
local getmatch="$2"
- local description="$3"
+ local getnomatch="$3"
+ local description="$4"
+ local nomatch_description="$5"
$IP -6 rule add $match table $RTABLE
$IP -6 route get $GW_IP6 $getmatch | grep -q "table $RTABLE"
log_test $? 0 "rule6 check: $description"
+ $IP -6 route get $GW_IP6 $getnomatch 2>&1 | grep -q "table $RTABLE"
+ log_test $? 1 "rule6 check: $nomatch_description"
+
fib_rule6_del_by_pref "$match"
log_test $? 0 "rule6 del by pref: $description"
}
@@ -201,6 +206,7 @@ fib_rule6_test_reject()
fib_rule6_test()
{
local ext_name=$1; shift
+ local getnomatch
local getmatch
local match
local cnt
@@ -212,10 +218,14 @@ fib_rule6_test()
$IP -6 route add table $RTABLE default via $GW_IP6 dev $DEV onlink
match="oif $DEV"
- fib_rule6_test_match_n_redirect "$match" "$match" "oif redirect to table"
+ getnomatch="oif lo"
+ fib_rule6_test_match_n_redirect "$match" "$match" "$getnomatch" \
+ "oif redirect to table" "oif no redirect to table"
match="from $SRC_IP6 iif $DEV"
- fib_rule6_test_match_n_redirect "$match" "$match" "iif redirect to table"
+ getnomatch="from $SRC_IP6 iif lo"
+ fib_rule6_test_match_n_redirect "$match" "$match" "$getnomatch" \
+ "iif redirect to table" "iif no redirect to table"
# Reject dsfield (tos) options which have ECN bits set
for cnt in $(seq 1 3); do
@@ -229,37 +239,52 @@ fib_rule6_test()
# Using option 'tos' instead of 'dsfield' as old iproute2
# versions don't support 'dsfield' in ip rule show.
getmatch="tos $cnt"
+ getnomatch="tos 0x20"
fib_rule6_test_match_n_redirect "$match" "$getmatch" \
- "$getmatch redirect to table"
+ "$getnomatch" "$getmatch redirect to table" \
+ "$getnomatch no redirect to table"
done
match="fwmark 0x64"
getmatch="mark 0x64"
- fib_rule6_test_match_n_redirect "$match" "$getmatch" "fwmark redirect to table"
+ getnomatch="mark 0x63"
+ fib_rule6_test_match_n_redirect "$match" "$getmatch" "$getnomatch" \
+ "fwmark redirect to table" "fwmark no redirect to table"
fib_check_iproute_support "uidrange" "uid"
if [ $? -eq 0 ]; then
match="uidrange 100-100"
getmatch="uid 100"
- fib_rule6_test_match_n_redirect "$match" "$getmatch" "uid redirect to table"
+ getnomatch="uid 101"
+ fib_rule6_test_match_n_redirect "$match" "$getmatch" \
+ "$getnomatch" "uid redirect to table" \
+ "uid no redirect to table"
fi
fib_check_iproute_support "sport" "sport"
if [ $? -eq 0 ]; then
match="sport 666 dport 777"
- fib_rule6_test_match_n_redirect "$match" "$match" "sport and dport redirect to table"
+ getnomatch="sport 667 dport 778"
+ fib_rule6_test_match_n_redirect "$match" "$match" \
+ "$getnomatch" "sport and dport redirect to table" \
+ "sport and dport no redirect to table"
fi
fib_check_iproute_support "ipproto" "ipproto"
if [ $? -eq 0 ]; then
match="ipproto tcp"
- fib_rule6_test_match_n_redirect "$match" "$match" "ipproto match"
+ getnomatch="ipproto udp"
+ fib_rule6_test_match_n_redirect "$match" "$match" \
+ "$getnomatch" "ipproto tcp match" "ipproto udp no match"
fi
fib_check_iproute_support "ipproto" "ipproto"
if [ $? -eq 0 ]; then
match="ipproto ipv6-icmp"
- fib_rule6_test_match_n_redirect "$match" "$match" "ipproto ipv6-icmp match"
+ getnomatch="ipproto tcp"
+ fib_rule6_test_match_n_redirect "$match" "$match" \
+ "$getnomatch" "ipproto ipv6-icmp match" \
+ "ipproto ipv6-tcp no match"
fi
}
@@ -320,12 +345,17 @@ fib_rule4_test_match_n_redirect()
{
local match="$1"
local getmatch="$2"
- local description="$3"
+ local getnomatch="$3"
+ local description="$4"
+ local nomatch_description="$5"
$IP rule add $match table $RTABLE
$IP route get $GW_IP4 $getmatch | grep -q "table $RTABLE"
log_test $? 0 "rule4 check: $description"
+ $IP route get $GW_IP4 $getnomatch 2>&1 | grep -q "table $RTABLE"
+ log_test $? 1 "rule4 check: $nomatch_description"
+
fib_rule4_del_by_pref "$match"
log_test $? 0 "rule4 del by pref: $description"
}
@@ -347,6 +377,7 @@ fib_rule4_test_reject()
fib_rule4_test()
{
local ext_name=$1; shift
+ local getnomatch
local getmatch
local match
local cnt
@@ -358,14 +389,18 @@ fib_rule4_test()
$IP route add table $RTABLE default via $GW_IP4 dev $DEV onlink
match="oif $DEV"
- fib_rule4_test_match_n_redirect "$match" "$match" "oif redirect to table"
+ getnomatch="oif lo"
+ fib_rule4_test_match_n_redirect "$match" "$match" "$getnomatch" \
+ "oif redirect to table" "oif no redirect to table"
# need enable forwarding and disable rp_filter temporarily as all the
# addresses are in the same subnet and egress device == ingress device.
ip netns exec $testns sysctl -qw net.ipv4.ip_forward=1
ip netns exec $testns sysctl -qw net.ipv4.conf.$DEV.rp_filter=0
match="from $SRC_IP iif $DEV"
- fib_rule4_test_match_n_redirect "$match" "$match" "iif redirect to table"
+ getnomatch="from $SRC_IP iif lo"
+ fib_rule4_test_match_n_redirect "$match" "$match" "$getnomatch" \
+ "iif redirect to table" "iif no redirect to table"
ip netns exec $testns sysctl -qw net.ipv4.ip_forward=0
# Reject dsfield (tos) options which have ECN bits set
@@ -380,37 +415,53 @@ fib_rule4_test()
# Using option 'tos' instead of 'dsfield' as old iproute2
# versions don't support 'dsfield' in ip rule show.
getmatch="tos $cnt"
+ getnomatch="tos 0x20"
fib_rule4_test_match_n_redirect "$match" "$getmatch" \
- "$getmatch redirect to table"
+ "$getnomatch" "$getmatch redirect to table" \
+ "$getnomatch no redirect to table"
done
match="fwmark 0x64"
getmatch="mark 0x64"
- fib_rule4_test_match_n_redirect "$match" "$getmatch" "fwmark redirect to table"
+ getnomatch="mark 0x63"
+ fib_rule4_test_match_n_redirect "$match" "$getmatch" "$getnomatch" \
+ "fwmark redirect to table" "fwmark no redirect to table"
fib_check_iproute_support "uidrange" "uid"
if [ $? -eq 0 ]; then
match="uidrange 100-100"
getmatch="uid 100"
- fib_rule4_test_match_n_redirect "$match" "$getmatch" "uid redirect to table"
+ getnomatch="uid 101"
+ fib_rule4_test_match_n_redirect "$match" "$getmatch" \
+ "$getnomatch" "uid redirect to table" \
+ "uid no redirect to table"
fi
fib_check_iproute_support "sport" "sport"
if [ $? -eq 0 ]; then
match="sport 666 dport 777"
- fib_rule4_test_match_n_redirect "$match" "$match" "sport and dport redirect to table"
+ getnomatch="sport 667 dport 778"
+ fib_rule4_test_match_n_redirect "$match" "$match" \
+ "$getnomatch" "sport and dport redirect to table" \
+ "sport and dport no redirect to table"
fi
fib_check_iproute_support "ipproto" "ipproto"
if [ $? -eq 0 ]; then
match="ipproto tcp"
- fib_rule4_test_match_n_redirect "$match" "$match" "ipproto tcp match"
+ getnomatch="ipproto udp"
+ fib_rule4_test_match_n_redirect "$match" "$match" \
+ "$getnomatch" "ipproto tcp match" \
+ "ipproto udp no match"
fi
fib_check_iproute_support "ipproto" "ipproto"
if [ $? -eq 0 ]; then
match="ipproto icmp"
- fib_rule4_test_match_n_redirect "$match" "$match" "ipproto icmp match"
+ getnomatch="ipproto tcp"
+ fib_rule4_test_match_n_redirect "$match" "$match" \
+ "$getnomatch" "ipproto icmp match" \
+ "ipproto tcp no match"
fi
}
The fib_rule{4,6} tests verify the behavior of a given FIB rule selector (e.g., dport, sport) by redirecting to a routing table with a default route using a FIB rule with the given selector and checking that a route lookup using the selector matches this default route. Add negative tests to verify that a FIB rule is not hit when it should not. Signed-off-by: Ido Schimmel <idosch@nvidia.com> --- tools/testing/selftests/net/fib_rule_tests.sh | 87 +++++++++++++++---- 1 file changed, 69 insertions(+), 18 deletions(-)