@@ -7,6 +7,7 @@
#include <linux/pci.h>
#include <linux/ptp_clock_kernel.h>
#include <linux/types.h>
+#include <linux/linkmode.h>
#include <linux/avf/virtchnl.h>
#include <linux/net/intel/i40e_client.h>
#include <net/devlink.h>
@@ -5641,50 +5641,78 @@ static int i40e_get_module_eeprom(struct net_device *netdev,
return 0;
}
+static void i40e_eee_capability_to_kedata_supported(__le16 eee_capability_,
+ unsigned long *supported)
+{
+ const int eee_capability = le16_to_cpu(eee_capability_);
+ static const int lut[] = {
+ ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+ ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT,
+ };
+
+ linkmode_zero(supported);
+ for (unsigned int i = ARRAY_SIZE(lut); i--; )
+ if (eee_capability & BIT(i + 1))
+ linkmode_set_bit(lut[i], supported);
+}
+
static int i40e_get_eee(struct net_device *netdev, struct ethtool_keee *edata)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_aq_get_phy_abilities_resp phy_cfg;
struct i40e_vsi *vsi = np->vsi;
struct i40e_pf *pf = vsi->back;
struct i40e_hw *hw = &pf->hw;
- int status = 0;
+ int status;
/* Get initial PHY capabilities */
status = i40e_aq_get_phy_capabilities(hw, false, true, &phy_cfg, NULL);
if (status)
return -EAGAIN;
/* Check whether NIC configuration is compatible with Energy Efficient
* Ethernet (EEE) mode.
*/
if (phy_cfg.eee_capability == 0)
return -EOPNOTSUPP;
+ i40e_eee_capability_to_kedata_supported(phy_cfg.eee_capability,
+ edata->supported);
+ linkmode_copy(edata->lp_advertised, edata->supported);
+
/* Get current configuration */
status = i40e_aq_get_phy_capabilities(hw, false, false, &phy_cfg, NULL);
if (status)
return -EAGAIN;
+ linkmode_zero(edata->advertised);
+ if (phy_cfg.eee_capability)
+ linkmode_copy(edata->advertised, edata->supported);
edata->eee_enabled = !!phy_cfg.eee_capability;
edata->tx_lpi_enabled = pf->stats.tx_lpi_status;
edata->eee_active = pf->stats.tx_lpi_status && pf->stats.rx_lpi_status;
return 0;
}
static int i40e_is_eee_param_supported(struct net_device *netdev,
struct ethtool_keee *edata)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
struct i40e_pf *pf = vsi->back;
struct i40e_ethtool_not_used {
- u32 value;
+ bool value;
const char *name;
} param[] = {
- {edata->tx_lpi_timer, "tx-timer"},
+ {!!(edata->advertised[0] & ~edata->supported[0]), "advertise"},
+ {!!edata->tx_lpi_timer, "tx-timer"},
{edata->tx_lpi_enabled != pf->stats.tx_lpi_status, "tx-lpi"}
};
int i;
@@ -5710,7 +5738,7 @@ static int i40e_set_eee(struct net_device *netdev, struct ethtool_keee *edata)
struct i40e_pf *pf = vsi->back;
struct i40e_hw *hw = &pf->hw;
__le16 eee_capability;
- int status = 0;
+ int status;
/* Deny parameters we don't support */
if (i40e_is_eee_param_supported(netdev, edata))
@@ -7263,6 +7263,25 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf)
return err;
}
#endif /* CONFIG_I40E_DCB */
+static void i40e_print_link_message_eee(struct i40e_vsi *vsi,
+ const char *speed, const char *fc)
+{
+ struct ethtool_keee kedata;
+
+ memzero_explicit(&kedata, sizeof(kedata));
+ if (vsi->netdev->ethtool_ops->get_eee)
+ vsi->netdev->ethtool_ops->get_eee(vsi->netdev, &kedata);
+
+ if (!linkmode_empty(kedata.supported))
+ netdev_info(vsi->netdev,
+ "NIC Link is Up, %sbps Full Duplex, Flow Control: %s, EEE: %s\n",
+ speed, fc,
+ kedata.eee_enabled ? "Enabled" : "Disabled");
+ else
+ netdev_info(vsi->netdev,
+ "NIC Link is Up, %sbps Full Duplex, Flow Control: %s\n",
+ speed, fc);
+}
/**
* i40e_print_link_message - print link up or down
@@ -7395,9 +7414,7 @@ void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
"NIC Link is Up, %sbps Full Duplex, Requested FEC: %s, Negotiated FEC: %s, Autoneg: %s, Flow Control: %s\n",
speed, req_fec, fec, an, fc);
} else {
- netdev_info(vsi->netdev,
- "NIC Link is Up, %sbps Full Duplex, Flow Control: %s\n",
- speed, fc);
+ i40e_print_link_message_eee(vsi, speed, fc);
}
}
Add "EEE: Enabled/Disabled" to dmesg for supported X710 Base-T/KR/KX cards. According to the IEEE standard report the EEE ability and and the EEE Link Partner ability. Use the kernel's 'ethtool_keee' structure and report EEE link modes. Example: dmesg | grep 'NIC Link is' ethtool --show-eee <device> Before: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None Supported EEE link modes: Not reported Advertised EEE link modes: Not reported Link partner advertised EEE link modes: Not reported After: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None, EEE: Enabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Advertised EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Link partner advertised EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> --- v1->v2 removed some not mandatory changes, some style improvements --- drivers/net/ethernet/intel/i40e/i40e.h | 1 + .../net/ethernet/intel/i40e/i40e_ethtool.c | 36 ++++++++++++++++--- drivers/net/ethernet/intel/i40e/i40e_main.c | 23 ++++++++++-- 3 files changed, 53 insertions(+), 7 deletions(-)