@@ -23,8 +23,10 @@ struct phy_device;
int ethnl_cable_test_alloc(struct phy_device *phydev, u8 cmd);
void ethnl_cable_test_free(struct phy_device *phydev);
void ethnl_cable_test_finished(struct phy_device *phydev);
-int ethnl_cable_test_result(struct phy_device *phydev, u8 pair, u8 result);
-int ethnl_cable_test_fault_length(struct phy_device *phydev, u8 pair, u32 cm);
+int ethnl_cable_test_result_with_src(struct phy_device *phydev, u8 pair,
+ u8 result, u8 src);
+int ethnl_cable_test_fault_length_with_src(struct phy_device *phydev, u8 pair,
+ u32 cm, u8 src);
int ethnl_cable_test_amplitude(struct phy_device *phydev, u8 pair, s16 mV);
int ethnl_cable_test_pulse(struct phy_device *phydev, u16 mV);
int ethnl_cable_test_step(struct phy_device *phydev, u32 first, u32 last,
@@ -54,14 +56,14 @@ static inline void ethnl_cable_test_free(struct phy_device *phydev)
static inline void ethnl_cable_test_finished(struct phy_device *phydev)
{
}
-static inline int ethnl_cable_test_result(struct phy_device *phydev, u8 pair,
- u8 result)
+static inline int ethnl_cable_test_result_with_src(struct phy_device *phydev,
+ u8 pair, u8 result, u8 src)
{
return -EOPNOTSUPP;
}
-static inline int ethnl_cable_test_fault_length(struct phy_device *phydev,
- u8 pair, u32 cm)
+static inline int ethnl_cable_test_fault_length_with_src(struct phy_device *phydev,
+ u8 pair, u32 cm, u8 src)
{
return -EOPNOTSUPP;
}
@@ -119,4 +121,19 @@ static inline bool ethtool_dev_mm_supported(struct net_device *dev)
}
#endif /* IS_ENABLED(CONFIG_ETHTOOL_NETLINK) */
+
+static inline int ethnl_cable_test_result(struct phy_device *phydev, u8 pair,
+ u8 result)
+{
+ return ethnl_cable_test_result_with_src(phydev, pair, result,
+ ETHTOOL_A_CABLE_INF_SRC_TDR);
+}
+
+static inline int ethnl_cable_test_fault_length(struct phy_device *phydev,
+ u8 pair, u32 cm)
+{
+ return ethnl_cable_test_fault_length_with_src(phydev, pair, cm,
+ ETHTOOL_A_CABLE_INF_SRC_TDR);
+}
+
#endif /* _LINUX_ETHTOOL_NETLINK_H_ */
@@ -160,7 +160,8 @@ void ethnl_cable_test_finished(struct phy_device *phydev)
}
EXPORT_SYMBOL_GPL(ethnl_cable_test_finished);
-int ethnl_cable_test_result(struct phy_device *phydev, u8 pair, u8 result)
+int ethnl_cable_test_result_with_src(struct phy_device *phydev, u8 pair,
+ u8 result, u8 src)
{
struct nlattr *nest;
int ret = -EMSGSIZE;
@@ -173,6 +174,10 @@ int ethnl_cable_test_result(struct phy_device *phydev, u8 pair, u8 result)
goto err;
if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_RESULT_CODE, result))
goto err;
+ if (src != ETHTOOL_A_CABLE_INF_SRC_UNSPEC) {
+ if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_RESULT_SRC, src))
+ goto err;
+ }
nla_nest_end(phydev->skb, nest);
return 0;
@@ -181,9 +186,10 @@ int ethnl_cable_test_result(struct phy_device *phydev, u8 pair, u8 result)
nla_nest_cancel(phydev->skb, nest);
return ret;
}
-EXPORT_SYMBOL_GPL(ethnl_cable_test_result);
+EXPORT_SYMBOL_GPL(ethnl_cable_test_result_with_src);
-int ethnl_cable_test_fault_length(struct phy_device *phydev, u8 pair, u32 cm)
+int ethnl_cable_test_fault_length_with_src(struct phy_device *phydev, u8 pair,
+ u32 cm, u8 src)
{
struct nlattr *nest;
int ret = -EMSGSIZE;
@@ -197,6 +203,11 @@ int ethnl_cable_test_fault_length(struct phy_device *phydev, u8 pair, u32 cm)
goto err;
if (nla_put_u32(phydev->skb, ETHTOOL_A_CABLE_FAULT_LENGTH_CM, cm))
goto err;
+ if (src != ETHTOOL_A_CABLE_INF_SRC_UNSPEC) {
+ if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_FAULT_LENGTH_SRC,
+ src))
+ goto err;
+ }
nla_nest_end(phydev->skb, nest);
return 0;
@@ -205,7 +216,7 @@ int ethnl_cable_test_fault_length(struct phy_device *phydev, u8 pair, u32 cm)
nla_nest_cancel(phydev->skb, nest);
return ret;
}
-EXPORT_SYMBOL_GPL(ethnl_cable_test_fault_length);
+EXPORT_SYMBOL_GPL(ethnl_cable_test_fault_length_with_src);
static const struct nla_policy cable_test_tdr_act_cfg_policy[] = {
[ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST] = { .type = NLA_U32 },
Enhance the ethtool cable test interface by introducing the ability to specify the source of the diagnostic information for cable test results. This is particularly useful for PHYs that offer multiple diagnostic methods, such as Time Domain Reflectometry (TDR) and Active Link Cable Diagnostic (ALCD). Key changes: - Added `ethnl_cable_test_result_with_src` and `ethnl_cable_test_fault_length_with_src` functions to allow specifying the information source when reporting cable test results. - Updated existing `ethnl_cable_test_result` and `ethnl_cable_test_fault_length` functions to use TDR as the default source, ensuring backward compatibility. - Modified the UAPI to support these new attributes, enabling drivers to provide more detailed diagnostic information. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- changes v2: - use u8 instead of u32 for src - do not send src field if src is ETHTOOL_A_CABLE_INF_SRC_UNSPEC --- include/linux/ethtool_netlink.h | 29 +++++++++++++++++++++++------ net/ethtool/cabletest.c | 19 +++++++++++++++---- 2 files changed, 38 insertions(+), 10 deletions(-)