From patchwork Thu Aug 29 05:51:31 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Raju Lakkaraju - I30499 X-Patchwork-Id: 13782465 X-Patchwork-Delegate: kuba@kernel.org Received: from esa.microchip.iphmx.com (esa.microchip.iphmx.com [68.232.153.233]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7B2BA14EC5D; Thu, 29 Aug 2024 05:56:04 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=68.232.153.233 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724910966; cv=none; b=C8F3WFCr1nIU7pMY44m156ml/JQJQMkz96O4WyJfTNsOtvebIXERVc3zcE78c7v2CYj6W8drCyiTnw0r+zN0VW0vzMnOInE7e8qLunM8raSlW3VA70BWgpAn/fA6VR55AuietBDJQKBgZRiJ65srtunDgCVwhLFEnU1VOI6839w= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724910966; c=relaxed/simple; bh=edEdCCAZtD0WOroumycbnXtVwzRb7i5enLvb6qOTwiY=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=UB/cYqz+n6N995LjMItrjtpfzd142f7KaJTmMsfDUPb8+VdH4HFrGpbKuSjVSz45qWHx7KC66rKiPY9ioJwAb6gYhbBQoKHL2mJdfCbv9qL+i/tAQSiwfo9etFcaRxyphadnYawpMJj8b+pWxzSrbVU1YBVNU2NDX0TIPA9qOHo= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=microchip.com; spf=pass smtp.mailfrom=microchip.com; dkim=pass (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b=x80mFvCN; arc=none smtp.client-ip=68.232.153.233 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=microchip.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=microchip.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b="x80mFvCN" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1724910964; x=1756446964; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=edEdCCAZtD0WOroumycbnXtVwzRb7i5enLvb6qOTwiY=; b=x80mFvCNLHomi3IbrFRdMZza1jrz2kVq8UV8XIiTyqyj1eSGDZsHf48z ZB2IdbqGb8N+qNcgsL4eB2cHXfiHAa7/ezShGXlC7lTyDvVavVJEVx7Ys eFi3sVRCc8XUwdjrP6t8hTKY5PvhWyknFMsts/EZln5rPFYuWHsM+JuNY 6GcaRxr4Uk3ggy9e2NtjYSzqAkULoexVqxx93CVTD3HPcE8Mdz+rjbAsy GaerkJD6kSQs0gbGhxedyqcKsvg4wAq6j4oOvqKfYEJWlN9+VCYJrxzXa C9m4sa9nQ5f8b+HBjejOqB527+HITEJTUU1GusEqaSa1lUoSiCMPFC47s w==; X-CSE-ConnectionGUID: 2MQclz5sT/+LITt4o2qSTg== X-CSE-MsgGUID: K5PVPhOGSLuOfvvYjMWD5w== X-IronPort-AV: E=Sophos;i="6.10,184,1719903600"; d="scan'208";a="261978661" X-Amp-Result: SKIPPED(no attachment in message) Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa5.microchip.iphmx.com with ESMTP/TLS/ECDHE-RSA-AES128-GCM-SHA256; 28 Aug 2024 22:56:00 -0700 Received: from chn-vm-ex04.mchp-main.com (10.10.85.152) by chn-vm-ex02.mchp-main.com (10.10.85.144) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.35; Wed, 28 Aug 2024 22:55:41 -0700 Received: from HYD-DK-UNGSW21.microchip.com (10.10.85.11) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server id 15.1.2507.35 via Frontend Transport; Wed, 28 Aug 2024 22:55:36 -0700 From: Raju Lakkaraju To: CC: , , , , , , , , , , , , Subject: [PATCH net-next V4 4/5] net: lan743x: Migrate phylib to phylink Date: Thu, 29 Aug 2024 11:21:31 +0530 Message-ID: <20240829055132.79638-5-Raju.Lakkaraju@microchip.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240829055132.79638-1-Raju.Lakkaraju@microchip.com> References: <20240829055132.79638-1-Raju.Lakkaraju@microchip.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Patchwork-Delegate: kuba@kernel.org Migrate phy support from phylib to phylink. Signed-off-by: Raju Lakkaraju --- Change List: ============ V3 -> V4: - Add the Fixed-link by include the Russell King patch - Change lan743x_phylink_create( ) argument from netdev to adapter V2 -> V3: - Remove the unwanted parens in each of these if() sub-blocks - Replace "to_net_dev(config->dev)" with "netdev". - Add GMII_ID/RGMII_TXID/RGMII_RXID in supported_interfaces - Fix the lan743x_phy_handle_exists( ) return type V1 -> V2: - Split the PHYLINK and SFP changes in 2 different patch series drivers/net/ethernet/microchip/Kconfig | 5 +- drivers/net/ethernet/microchip/lan743x_main.c | 599 +++++++++++------- drivers/net/ethernet/microchip/lan743x_main.h | 3 + 3 files changed, 382 insertions(+), 225 deletions(-) diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig index 43ba71e82260..4b7a0433b7e5 100644 --- a/drivers/net/ethernet/microchip/Kconfig +++ b/drivers/net/ethernet/microchip/Kconfig @@ -46,12 +46,13 @@ config LAN743X tristate "LAN743x support" depends on PCI depends on PTP_1588_CLOCK_OPTIONAL - select PHYLIB select FIXED_PHY select CRC16 select CRC32 + select PHYLINK help - Support for the Microchip LAN743x PCI Express Gigabit Ethernet chip + Support for the Microchip LAN743x and PCI11x1x families of PCI + Express Ethernet devices To compile this driver as a module, choose M here. The module will be called lan743x. diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c index b4a4c2840a83..91e74e231251 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.c +++ b/drivers/net/ethernet/microchip/lan743x_main.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "lan743x_main.h" #include "lan743x_ethtool.h" @@ -1077,26 +1078,7 @@ static int lan743x_sgmii_2_5G_mode_set(struct lan743x_adapter *adapter, VR_MII_BAUD_RATE_1P25GBPS); } -static int lan743x_is_sgmii_2_5G_mode(struct lan743x_adapter *adapter, - bool *status) -{ - int ret; - - ret = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, - VR_MII_GEN2_4_MPLL_CTRL1); - if (ret < 0) - return ret; - - if (ret == VR_MII_MPLL_MULTIPLIER_125 || - ret == VR_MII_MPLL_MULTIPLIER_50) - *status = true; - else - *status = false; - - return 0; -} - -static int lan743x_sgmii_aneg_update(struct lan743x_adapter *adapter) +static int lan743x_serdes_clock_and_aneg_update(struct lan743x_adapter *adapter) { enum lan743x_sgmii_lsd lsd = adapter->sgmii_lsd; int mii_ctrl; @@ -1211,49 +1193,6 @@ static int lan743x_pcs_power_reset(struct lan743x_adapter *adapter) return lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_UP); } -static int lan743x_sgmii_config(struct lan743x_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct phy_device *phydev = netdev->phydev; - bool status; - int ret; - - ret = lan743x_get_lsd(phydev->speed, phydev->duplex, - phydev->master_slave_state); - if (ret < 0) { - netif_err(adapter, drv, adapter->netdev, - "error %d link-speed-duplex(LSD) invalid\n", ret); - return ret; - } - - adapter->sgmii_lsd = ret; - netif_dbg(adapter, drv, adapter->netdev, - "Link Speed Duplex (lsd) : 0x%X\n", adapter->sgmii_lsd); - - ret = lan743x_sgmii_aneg_update(adapter); - if (ret < 0) { - netif_err(adapter, drv, adapter->netdev, - "error %d SGMII cfg failed\n", ret); - return ret; - } - - ret = lan743x_is_sgmii_2_5G_mode(adapter, &status); - if (ret < 0) { - netif_err(adapter, drv, adapter->netdev, - "error %d SGMII get mode failed\n", ret); - return ret; - } - - if (status) - netif_dbg(adapter, drv, adapter->netdev, - "SGMII 2.5G mode enable\n"); - else - netif_dbg(adapter, drv, adapter->netdev, - "SGMII 1G mode enable\n"); - - return lan743x_pcs_power_reset(adapter); -} - static void lan743x_mac_set_address(struct lan743x_adapter *adapter, u8 *addr) { @@ -1407,103 +1346,11 @@ static int lan743x_phy_reset(struct lan743x_adapter *adapter) 50000, 1000000); } -static void lan743x_phy_update_flowcontrol(struct lan743x_adapter *adapter, - u16 local_adv, u16 remote_adv) -{ - struct lan743x_phy *phy = &adapter->phy; - u8 cap; - - if (phy->fc_autoneg) - cap = mii_resolve_flowctrl_fdx(local_adv, remote_adv); - else - cap = phy->fc_request_control; - - lan743x_mac_flow_ctrl_set_enables(adapter, - cap & FLOW_CTRL_TX, - cap & FLOW_CTRL_RX); -} - static int lan743x_phy_init(struct lan743x_adapter *adapter) { return lan743x_phy_reset(adapter); } -static void lan743x_phy_link_status_change(struct net_device *netdev) -{ - struct lan743x_adapter *adapter = netdev_priv(netdev); - struct phy_device *phydev = netdev->phydev; - u32 data; - - phy_print_status(phydev); - if (phydev->state == PHY_RUNNING) { - int remote_advertisement = 0; - int local_advertisement = 0; - - data = lan743x_csr_read(adapter, MAC_CR); - - /* set duplex mode */ - if (phydev->duplex) - data |= MAC_CR_DPX_; - else - data &= ~MAC_CR_DPX_; - - /* set bus speed */ - switch (phydev->speed) { - case SPEED_10: - data &= ~MAC_CR_CFG_H_; - data &= ~MAC_CR_CFG_L_; - break; - case SPEED_100: - data &= ~MAC_CR_CFG_H_; - data |= MAC_CR_CFG_L_; - break; - case SPEED_1000: - data |= MAC_CR_CFG_H_; - data &= ~MAC_CR_CFG_L_; - break; - case SPEED_2500: - data |= MAC_CR_CFG_H_; - data |= MAC_CR_CFG_L_; - break; - } - lan743x_csr_write(adapter, MAC_CR, data); - - local_advertisement = - linkmode_adv_to_mii_adv_t(phydev->advertising); - remote_advertisement = - linkmode_adv_to_mii_adv_t(phydev->lp_advertising); - - lan743x_phy_update_flowcontrol(adapter, local_advertisement, - remote_advertisement); - lan743x_ptp_update_latency(adapter, phydev->speed); - if (phydev->interface == PHY_INTERFACE_MODE_SGMII || - phydev->interface == PHY_INTERFACE_MODE_1000BASEX || - phydev->interface == PHY_INTERFACE_MODE_2500BASEX) - lan743x_sgmii_config(adapter); - - data = lan743x_csr_read(adapter, MAC_CR); - if (phydev->enable_tx_lpi) - data |= MAC_CR_EEE_EN_; - else - data &= ~MAC_CR_EEE_EN_; - lan743x_csr_write(adapter, MAC_CR, data); - } -} - -static void lan743x_phy_close(struct lan743x_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct phy_device *phydev = netdev->phydev; - - phy_stop(netdev->phydev); - phy_disconnect(netdev->phydev); - - /* using phydev here as phy_disconnect NULLs netdev->phydev */ - if (phy_is_pseudo_fixed_link(phydev)) - fixed_phy_unregister(phydev); - -} - static void lan743x_phy_interface_select(struct lan743x_adapter *adapter) { u32 id_rev; @@ -1520,65 +1367,9 @@ static void lan743x_phy_interface_select(struct lan743x_adapter *adapter) adapter->phy_interface = PHY_INTERFACE_MODE_MII; else adapter->phy_interface = PHY_INTERFACE_MODE_RGMII; -} - -static int lan743x_phy_open(struct lan743x_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct lan743x_phy *phy = &adapter->phy; - struct fixed_phy_status fphy_status = { - .link = 1, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, - }; - struct phy_device *phydev; - int ret = -EIO; - - /* try devicetree phy, or fixed link */ - phydev = of_phy_get_and_connect(netdev, adapter->pdev->dev.of_node, - lan743x_phy_link_status_change); - - if (!phydev) { - /* try internal phy */ - phydev = phy_find_first(adapter->mdiobus); - if (!phydev) { - if ((adapter->csr.id_rev & ID_REV_ID_MASK_) == - ID_REV_ID_LAN7431_) { - phydev = fixed_phy_register(PHY_POLL, - &fphy_status, NULL); - if (IS_ERR(phydev)) { - netdev_err(netdev, "No PHY/fixed_PHY found\n"); - return PTR_ERR(phydev); - } - } else { - goto return_error; - } - } - lan743x_phy_interface_select(adapter); - - ret = phy_connect_direct(netdev, phydev, - lan743x_phy_link_status_change, - adapter->phy_interface); - if (ret) - goto return_error; - } - - /* MAC doesn't support 1000T Half */ - phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT); - - /* support both flow controls */ - phy_support_asym_pause(phydev); - phy->fc_request_control = (FLOW_CTRL_RX | FLOW_CTRL_TX); - phy->fc_autoneg = phydev->autoneg; - - phy_start(phydev); - phy_start_aneg(phydev); - phy_attached_info(phydev); - return 0; - -return_error: - return ret; + netif_dbg(adapter, drv, adapter->netdev, + "selected phy interface: 0x%X\n", adapter->phy_interface); } static void lan743x_rfe_open(struct lan743x_adapter *adapter) @@ -3079,6 +2870,350 @@ static int lan743x_rx_open(struct lan743x_rx *rx) return ret; } +static int lan743x_phylink_sgmii_config(struct lan743x_adapter *adapter) +{ + u32 sgmii_ctl; + int ret; + + ret = lan743x_get_lsd(SPEED_1000, DUPLEX_FULL, + MASTER_SLAVE_STATE_MASTER); + if (ret < 0) { + netif_err(adapter, drv, adapter->netdev, + "error %d link-speed-duplex(LSD) invalid\n", ret); + return ret; + } + + adapter->sgmii_lsd = ret; + netif_dbg(adapter, drv, adapter->netdev, + "Link Speed Duplex (lsd) : 0x%X\n", adapter->sgmii_lsd); + + /* LINK_STATUS_SOURCE from the External PHY via SGMII */ + sgmii_ctl = lan743x_csr_read(adapter, SGMII_CTL); + sgmii_ctl &= ~SGMII_CTL_LINK_STATUS_SOURCE_; + lan743x_csr_write(adapter, SGMII_CTL, sgmii_ctl); + + ret = lan743x_serdes_clock_and_aneg_update(adapter); + if (ret < 0) { + netif_err(adapter, drv, adapter->netdev, + "error %d sgmii aneg update failed\n", ret); + return ret; + } + + return lan743x_pcs_power_reset(adapter); +} + +static int lan743x_phylink_1000basex_config(struct lan743x_adapter *adapter) +{ + u32 sgmii_ctl; + int ret; + + ret = lan743x_get_lsd(SPEED_1000, DUPLEX_FULL, + MASTER_SLAVE_STATE_MASTER); + if (ret < 0) { + netif_err(adapter, drv, adapter->netdev, + "error %d link-speed-duplex(LSD) invalid\n", ret); + return ret; + } + + adapter->sgmii_lsd = ret; + netif_dbg(adapter, drv, adapter->netdev, + "Link Speed Duplex (lsd) : 0x%X\n", adapter->sgmii_lsd); + + /* LINK_STATUS_SOURCE from 1000BASE-X PCS link status */ + sgmii_ctl = lan743x_csr_read(adapter, SGMII_CTL); + sgmii_ctl |= SGMII_CTL_LINK_STATUS_SOURCE_; + lan743x_csr_write(adapter, SGMII_CTL, sgmii_ctl); + + ret = lan743x_serdes_clock_and_aneg_update(adapter); + if (ret < 0) { + netif_err(adapter, drv, adapter->netdev, + "error %d 1000basex aneg update failed\n", ret); + return ret; + } + + return lan743x_pcs_power_reset(adapter); +} + +static int lan743x_phylink_2500basex_config(struct lan743x_adapter *adapter) +{ + u32 sgmii_ctl; + int ret; + + ret = lan743x_get_lsd(SPEED_2500, DUPLEX_FULL, + MASTER_SLAVE_STATE_MASTER); + if (ret < 0) { + netif_err(adapter, drv, adapter->netdev, + "error %d link-speed-duplex(LSD) invalid\n", ret); + return ret; + } + + adapter->sgmii_lsd = ret; + netif_dbg(adapter, drv, adapter->netdev, + "Link Speed Duplex (lsd) : 0x%X\n", adapter->sgmii_lsd); + + /* LINK_STATUS_SOURCE from 2500BASE-X PCS link status */ + sgmii_ctl = lan743x_csr_read(adapter, SGMII_CTL); + sgmii_ctl |= SGMII_CTL_LINK_STATUS_SOURCE_; + lan743x_csr_write(adapter, SGMII_CTL, sgmii_ctl); + + ret = lan743x_serdes_clock_and_aneg_update(adapter); + if (ret < 0) { + netif_err(adapter, drv, adapter->netdev, + "error %d 2500basex aneg update failed\n", ret); + return ret; + } + + return lan743x_pcs_power_reset(adapter); +} + +static void lan743x_phylink_mac_config(struct phylink_config *config, + unsigned int link_an_mode, + const struct phylink_link_state *state) +{ + struct net_device *netdev = to_net_dev(config->dev); + struct lan743x_adapter *adapter = netdev_priv(netdev); + int ret; + + switch (state->interface) { + case PHY_INTERFACE_MODE_2500BASEX: + ret = lan743x_phylink_2500basex_config(adapter); + if (ret < 0) + netif_err(adapter, drv, adapter->netdev, + "2500BASEX config failed. Error %d\n", ret); + else + netif_dbg(adapter, drv, adapter->netdev, + "2500BASEX mode selected and configured\n"); + break; + case PHY_INTERFACE_MODE_1000BASEX: + ret = lan743x_phylink_1000basex_config(adapter); + if (ret < 0) + netif_err(adapter, drv, adapter->netdev, + "1000BASEX config failed. Error %d\n", ret); + else + netif_dbg(adapter, drv, adapter->netdev, + "1000BASEX mode selected and configured\n"); + break; + case PHY_INTERFACE_MODE_SGMII: + ret = lan743x_phylink_sgmii_config(adapter); + if (ret < 0) + netif_err(adapter, drv, adapter->netdev, + "SGMII config failed. Error %d\n", ret); + else + netif_dbg(adapter, drv, adapter->netdev, + "SGMII mode selected and configured\n"); + break; + default: + netif_dbg(adapter, drv, adapter->netdev, + "RGMII/GMII/MII(0x%X) mode enable\n", state->interface); + break; + } +} + +static void lan743x_phylink_mac_link_down(struct phylink_config *config, + unsigned int link_an_mode, + phy_interface_t interface) +{ + netif_tx_stop_all_queues(to_net_dev(config->dev)); +} + +static void lan743x_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, + unsigned int link_an_mode, + phy_interface_t interface, + int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + struct net_device *netdev = to_net_dev(config->dev); + struct lan743x_adapter *adapter = netdev_priv(netdev); + int mac_cr; + u8 cap; + + mac_cr = lan743x_csr_read(adapter, MAC_CR); + /* Pre-initialize register bits. + * Resulting value corresponds to SPEED_10 + */ + mac_cr &= ~(MAC_CR_CFG_H_ | MAC_CR_CFG_L_); + if (speed == SPEED_2500) + mac_cr |= MAC_CR_CFG_H_ | MAC_CR_CFG_L_; + else if (speed == SPEED_1000) + mac_cr |= MAC_CR_CFG_H_; + else if (speed == SPEED_100) + mac_cr |= MAC_CR_CFG_L_; + + lan743x_csr_write(adapter, MAC_CR, mac_cr); + + lan743x_ptp_update_latency(adapter, speed); + + /* Flow Control operation */ + cap = 0; + if (tx_pause) + cap |= FLOW_CTRL_TX; + if (rx_pause) + cap |= FLOW_CTRL_RX; + + lan743x_mac_flow_ctrl_set_enables(adapter, + cap & FLOW_CTRL_TX, + cap & FLOW_CTRL_RX); + + netif_tx_wake_all_queues(netdev); +} + +static const struct phylink_mac_ops lan743x_phylink_mac_ops = { + .mac_config = lan743x_phylink_mac_config, + .mac_link_down = lan743x_phylink_mac_link_down, + .mac_link_up = lan743x_phylink_mac_link_up, +}; + +static struct { + unsigned long mask; + int speed; + int duplex; +} lan743x_mac_caps_params[] = { + { MAC_2500FD, SPEED_2500, DUPLEX_FULL }, + { MAC_1000FD, SPEED_1000, DUPLEX_FULL }, + { MAC_100FD, SPEED_100, DUPLEX_FULL }, + { MAC_10FD, SPEED_10, DUPLEX_FULL }, + { MAC_100HD, SPEED_100, DUPLEX_HALF }, + { MAC_10HD, SPEED_10, DUPLEX_HALF }, +}; + +static int lan743x_find_max_speed(unsigned long caps, int *speed, int *duplex) +{ + int i; + + *speed = SPEED_UNKNOWN; + *duplex = DUPLEX_UNKNOWN; + for (i = 0; i < ARRAY_SIZE(lan743x_mac_caps_params); i++) { + if (caps & lan743x_mac_caps_params[i].mask) { + *speed = lan743x_mac_caps_params[i].speed; + *duplex = lan743x_mac_caps_params[i].duplex; + break; + } + } + + return *speed == SPEED_UNKNOWN ? -EINVAL : 0; +} + +static int lan743x_phylink_create(struct lan743x_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct phylink *pl; + + adapter->phylink_config.dev = &netdev->dev; + adapter->phylink_config.type = PHYLINK_NETDEV; + adapter->phylink_config.mac_managed_pm = false; + + adapter->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | + MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD; + + lan743x_phy_interface_select(adapter); + + switch (adapter->phy_interface) { + case PHY_INTERFACE_MODE_SGMII: + __set_bit(PHY_INTERFACE_MODE_SGMII, + adapter->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + adapter->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + adapter->phylink_config.supported_interfaces); + adapter->phylink_config.mac_capabilities |= MAC_2500FD; + break; + case PHY_INTERFACE_MODE_GMII: + __set_bit(PHY_INTERFACE_MODE_GMII, + adapter->phylink_config.supported_interfaces); + break; + case PHY_INTERFACE_MODE_MII: + __set_bit(PHY_INTERFACE_MODE_MII, + adapter->phylink_config.supported_interfaces); + break; + default: + phy_interface_set_rgmii(adapter->phylink_config.supported_interfaces); + } + + pl = phylink_create(&adapter->phylink_config, NULL, + adapter->phy_interface, &lan743x_phylink_mac_ops); + + if (IS_ERR(pl)) { + netdev_err(netdev, "Could not create phylink (%pe)\n", pl); + return PTR_ERR(pl); + } + + adapter->phylink = pl; + netdev_dbg(netdev, "lan743x phylink created"); + + return 0; +} + +static bool lan743x_phy_handle_exists(struct device_node *dn) +{ + dn = of_parse_phandle(dn, "phy-handle", 0); + of_node_put(dn); + return dn != NULL; +} + +static int lan743x_phylink_connect(struct lan743x_adapter *adapter) +{ + struct device_node *dn = adapter->pdev->dev.of_node; + struct net_device *dev = adapter->netdev; + struct phy_device *phydev; + int ret; + + if (dn) + ret = phylink_of_phy_connect(adapter->phylink, dn, 0); + + if (!dn || (ret && !lan743x_phy_handle_exists(dn))) { + phydev = phy_find_first(adapter->mdiobus); + if (phydev) { + /* attach the mac to the phy */ + ret = phylink_connect_phy(adapter->phylink, phydev); + } else if (((adapter->csr.id_rev & ID_REV_ID_MASK_) == + ID_REV_ID_LAN7431_) || adapter->is_pci11x1x) { + struct phylink_link_state state; + unsigned long caps; + + caps = adapter->phylink_config.mac_capabilities; + ret = lan743x_find_max_speed(caps, &state.speed, + &state.duplex); + if (ret) { + netdev_err(dev, "find unknown speed (%d)\n", + ret); + return ret; + } + + ret = phylink_set_fixed_link(adapter->phylink, &state); + if (ret) { + netdev_err(dev, "Could not set fixed link\n"); + return ret; + } + } else { + netdev_err(dev, "no PHY found\n"); + return -ENXIO; + } + } + + if (ret) { + netdev_err(dev, "Could not attach PHY (%d)\n", ret); + return ret; + } + + phylink_start(adapter->phylink); + + return 0; +} + +static void lan743x_phylink_disconnect(struct lan743x_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct phy_device *phydev = netdev->phydev; + + phylink_stop(adapter->phylink); + phylink_disconnect_phy(adapter->phylink); + + if (phydev) + if (phy_is_pseudo_fixed_link(phydev)) + fixed_phy_unregister(phydev); +} + static int lan743x_netdev_close(struct net_device *netdev) { struct lan743x_adapter *adapter = netdev_priv(netdev); @@ -3092,7 +3227,7 @@ static int lan743x_netdev_close(struct net_device *netdev) lan743x_ptp_close(adapter); - lan743x_phy_close(adapter); + lan743x_phylink_disconnect(adapter); lan743x_mac_close(adapter); @@ -3115,13 +3250,13 @@ static int lan743x_netdev_open(struct net_device *netdev) if (ret) goto close_intr; - ret = lan743x_phy_open(adapter); + ret = lan743x_phylink_connect(adapter); if (ret) goto close_mac; ret = lan743x_ptp_open(adapter); if (ret) - goto close_phy; + goto close_mac; lan743x_rfe_open(adapter); @@ -3161,9 +3296,8 @@ static int lan743x_netdev_open(struct net_device *netdev) lan743x_rx_close(&adapter->rx[index]); } lan743x_ptp_close(adapter); - -close_phy: - lan743x_phy_close(adapter); + if (adapter->phylink) + lan743x_phylink_disconnect(adapter); close_mac: lan743x_mac_close(adapter); @@ -3192,11 +3326,14 @@ static netdev_tx_t lan743x_netdev_xmit_frame(struct sk_buff *skb, static int lan743x_netdev_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { + struct lan743x_adapter *adapter = netdev_priv(netdev); + if (!netif_running(netdev)) return -EINVAL; if (cmd == SIOCSHWTSTAMP) return lan743x_ptp_ioctl(netdev, ifr, cmd); - return phy_mii_ioctl(netdev->phydev, ifr, cmd); + + return phylink_mii_ioctl(adapter->phylink, ifr, cmd); } static void lan743x_netdev_set_multicast(struct net_device *netdev) @@ -3301,10 +3438,17 @@ static void lan743x_mdiobus_cleanup(struct lan743x_adapter *adapter) mdiobus_unregister(adapter->mdiobus); } +static void lan743x_destroy_phylink(struct lan743x_adapter *adapter) +{ + phylink_destroy(adapter->phylink); + adapter->phylink = NULL; +} + static void lan743x_full_cleanup(struct lan743x_adapter *adapter) { unregister_netdev(adapter->netdev); + lan743x_destroy_phylink(adapter); lan743x_mdiobus_cleanup(adapter); lan743x_hardware_cleanup(adapter); lan743x_pci_cleanup(adapter); @@ -3518,14 +3662,21 @@ static int lan743x_pcidev_probe(struct pci_dev *pdev, NETIF_F_HW_CSUM | NETIF_F_RXCSUM; adapter->netdev->hw_features = adapter->netdev->features; - /* carrier off reporting is important to ethtool even BEFORE open */ - netif_carrier_off(netdev); + ret = lan743x_phylink_create(adapter); + if (ret < 0) { + netif_err(adapter, probe, netdev, + "failed to setup phylink (%d)\n", ret); + goto cleanup_mdiobus; + } ret = register_netdev(adapter->netdev); if (ret < 0) - goto cleanup_mdiobus; + goto cleanup_phylink; return 0; +cleanup_phylink: + lan743x_destroy_phylink(adapter); + cleanup_mdiobus: lan743x_mdiobus_cleanup(adapter); @@ -3781,6 +3932,7 @@ static int lan743x_pm_resume(struct device *dev) MAC_WK_SRC_WK_FR_SAVED_; lan743x_csr_write(adapter, MAC_WK_SRC, data); + rtnl_lock(); /* open netdev when netdev is at running state while resume. * For instance, it is true when system wakesup after pm-suspend * However, it is false when system wakes up after suspend GUI menu @@ -3789,6 +3941,7 @@ static int lan743x_pm_resume(struct device *dev) lan743x_netdev_open(netdev); netif_device_attach(netdev); + rtnl_unlock(); return 0; } diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h index 3b2585a384e2..7f73d66854be 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.h +++ b/drivers/net/ethernet/microchip/lan743x_main.h @@ -5,6 +5,7 @@ #define _LAN743X_H #include +#include #include "lan743x_ptp.h" #define DRIVER_AUTHOR "Bryan Whitehead " @@ -1083,6 +1084,8 @@ struct lan743x_adapter { u32 flags; u32 hw_cfg; phy_interface_t phy_interface; + struct phylink *phylink; + struct phylink_config phylink_config; }; #define LAN743X_COMPONENT_FLAG_RX(channel) BIT(20 + (channel))