@@ -21,6 +21,11 @@ config MCTP_SERIAL
Say y here if you need to connect to MCTP endpoints over serial. To
compile as a module, use m; the module will be called mctp-serial.
+config MCTP_SERIAL_TEST
+ bool "MCTP serial tests" if !KUNIT_ALL_TESTS
+ depends on MCTP_SERIAL=y && KUNIT=y
+ default KUNIT_ALL_TESTS
+
config MCTP_TRANSPORT_I2C
tristate "MCTP SMBus/I2C transport"
# i2c-mux is optional, but we must build as a module if i2c-mux is a module
@@ -521,3 +521,112 @@ module_exit(mctp_serial_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Jeremy Kerr <jk@codeconstruct.com.au>");
MODULE_DESCRIPTION("MCTP Serial transport");
+
+#if IS_ENABLED(CONFIG_MCTP_SERIAL_TEST)
+#include <kunit/test.h>
+
+#define MAX_CHUNKS 6
+struct test_chunk_tx {
+ u8 input_len;
+ u8 input[MCTP_SERIAL_MTU];
+ u8 chunks[MAX_CHUNKS];
+};
+
+static void test_next_chunk_len(struct kunit *test)
+{
+ struct mctp_serial devx;
+ struct mctp_serial *dev = &devx;
+ int next;
+
+ const struct test_chunk_tx *params = test->param_value;
+
+ memset(dev, 0x0, sizeof(*dev));
+ memcpy(dev->txbuf, params->input, params->input_len);
+ dev->txlen = params->input_len;
+
+ for (size_t i = 0; i < MAX_CHUNKS; i++) {
+ next = next_chunk_len(dev);
+ dev->txpos += next;
+ KUNIT_EXPECT_EQ(test, next, params->chunks[i]);
+
+ if (next == 0) {
+ KUNIT_EXPECT_EQ(test, dev->txpos, dev->txlen);
+ return;
+ }
+ }
+
+ KUNIT_FAIL_AND_ABORT(test, "Ran out of chunks");
+}
+
+static struct test_chunk_tx chunk_tx_tests[] = {
+ {
+ .input_len = 5,
+ .input = { 0x00, 0x11, 0x22, 0x7e, 0x80 },
+ .chunks = { 3, 1, 1, 0},
+ },
+ {
+ .input_len = 5,
+ .input = { 0x00, 0x11, 0x22, 0x7e, 0x7d },
+ .chunks = { 3, 1, 1, 0},
+ },
+ {
+ .input_len = 3,
+ .input = { 0x7e, 0x11, 0x22, },
+ .chunks = { 1, 2, 0},
+ },
+ {
+ .input_len = 3,
+ .input = { 0x7e, 0x7e, 0x7d, },
+ .chunks = { 1, 1, 1, 0},
+ },
+ {
+ .input_len = 4,
+ .input = { 0x7e, 0x7e, 0x00, 0x7d, },
+ .chunks = { 1, 1, 1, 1, 0},
+ },
+ {
+ .input_len = 6,
+ .input = { 0x7e, 0x7e, 0x00, 0x7d, 0x10, 0x10},
+ .chunks = { 1, 1, 1, 1, 2, 0},
+ },
+ {
+ .input_len = 1,
+ .input = { 0x7e },
+ .chunks = { 1, 0 },
+ },
+ {
+ .input_len = 1,
+ .input = { 0x80 },
+ .chunks = { 1, 0 },
+ },
+ {
+ .input_len = 3,
+ .input = { 0x80, 0x80, 0x00 },
+ .chunks = { 3, 0 },
+ },
+ {
+ .input_len = 7,
+ .input = { 0x01, 0x00, 0x08, 0xc8, 0x00, 0x80, 0x02 },
+ .chunks = { 7, 0 },
+ },
+ {
+ .input_len = 7,
+ .input = { 0x01, 0x00, 0x08, 0xc8, 0x7e, 0x80, 0x02 },
+ .chunks = { 4, 1, 2, 0 },
+ },
+};
+
+KUNIT_ARRAY_PARAM(chunk_tx, chunk_tx_tests, NULL);
+
+static struct kunit_case mctp_serial_test_cases[] = {
+ KUNIT_CASE_PARAM(test_next_chunk_len, chunk_tx_gen_params),
+};
+
+static struct kunit_suite mctp_serial_test_suite = {
+ .name = "mctp_serial",
+ .test_cases = mctp_serial_test_cases,
+};
+
+kunit_test_suite(mctp_serial_test_suite);
+
+#endif /* CONFIG_MCTP_SERIAL_TEST */
Test various edge cases of inputs that contain characters that need escaping. This adds a new kunit suite for mctp-serial. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> --- v2: Fix kunit param const pointer drivers/net/mctp/Kconfig | 5 ++ drivers/net/mctp/mctp-serial.c | 109 +++++++++++++++++++++++++++++++++ 2 files changed, 114 insertions(+)