@@ -290,7 +290,7 @@ int mcp251xfd_ring_init(struct mcp251xfd_priv *priv)
const struct mcp251xfd_rx_ring *rx_ring;
u16 base = 0, ram_used;
u8 fifo_nr = 1;
- int i;
+ int err = 0, i;
netdev_reset_queue(priv->ndev);
@@ -386,10 +386,18 @@ int mcp251xfd_ring_init(struct mcp251xfd_priv *priv)
netdev_err(priv->ndev,
"Error during ring configuration, using more RAM (%u bytes) than available (%u bytes).\n",
ram_used, MCP251XFD_RAM_SIZE);
- return -ENOMEM;
+ err = -ENOMEM;
}
- return 0;
+ if (priv->tx_obj_num_coalesce_irq &&
+ priv->tx_obj_num_coalesce_irq * 2 != priv->tx->obj_num) {
+ netdev_err(priv->ndev,
+ "Error during ring configuration, number of TEF coalescing buffers (%u) must be half of TEF buffers (%u).\n",
+ priv->tx_obj_num_coalesce_irq, priv->tx->obj_num);
+ err = -EINVAL;
+ }
+
+ return err;
}
void mcp251xfd_ring_free(struct mcp251xfd_priv *priv)
When changing the interface from CAN-CC to CAN-FD mode the old coalescing parameters are re-used. This might cause problem, as the configured parameters are too big for CAN-FD mode. During testing an invalid TX coalescing configuration has been seen. The problem should be been fixed in the previous patch, but add a safeguard here to ensure that the number of TEF coalescing buffers (if configured) is exactly the half of all TEF buffers. Link: https://lore.kernel.org/all/20240805-mcp251xfd-fix-ringconfig-v1-2-72086f0ca5ee@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)