| Message ID | 20240906062831.2243399-1-jacky_chou@aspeedtech.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | fef2843bb49f414d1523ca007d088071dee0e055 |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [v2] net: ftgmac100: Enable TX interrupt to avoid TX timeout | expand |
Hello: This patch was applied to netdev/net.git (main) by Paolo Abeni <pabeni@redhat.com>: On Fri, 6 Sep 2024 14:28:31 +0800 you wrote: > Currently, the driver only enables RX interrupt to handle RX > packets and TX resources. Sometimes there is not RX traffic, > so the TX resource needs to wait for RX interrupt to free. > This situation will toggle the TX timeout watchdog when the MAC > TX ring has no more resources to transmit packets. > Therefore, enable TX interrupt to release TX resources at any time. > > [...] Here is the summary with links: - [v2] net: ftgmac100: Enable TX interrupt to avoid TX timeout https://git.kernel.org/netdev/net/c/fef2843bb49f You are awesome, thank you!
diff --git a/drivers/net/ethernet/faraday/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h index 63b3e02fab16..4968f6f0bdbc 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.h +++ b/drivers/net/ethernet/faraday/ftgmac100.h @@ -84,7 +84,7 @@ FTGMAC100_INT_RPKT_BUF) /* All the interrupts we care about */ -#define FTGMAC100_INT_ALL (FTGMAC100_INT_RPKT_BUF | \ +#define FTGMAC100_INT_ALL (FTGMAC100_INT_RXTX | \ FTGMAC100_INT_BAD) /*
Currently, the driver only enables RX interrupt to handle RX packets and TX resources. Sometimes there is not RX traffic, so the TX resource needs to wait for RX interrupt to free. This situation will toggle the TX timeout watchdog when the MAC TX ring has no more resources to transmit packets. Therefore, enable TX interrupt to release TX resources at any time. When I am verifying iperf3 over UDP, the network hangs. Like the log below. root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0 Connecting to host 192.168.100.100, port 5201 [ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201 [ ID] Interval Transfer Bandwidth Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%) [ 4] Sent 20 datagrams iperf3: error - the server has terminated The network topology is FTGMAC connects directly to a PC. UDP does not need to wait for ACK, unlike TCP. Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead of waiting for the RX interrupt. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com> --- v2: - Add more information to commit message. --- drivers/net/ethernet/faraday/ftgmac100.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)