diff mbox series

[ethtool-next,v4,1/3] update UAPI header copies

Message ID 20240906145719.387824-2-maxime.chevallier@bootlin.com (mailing list archive)
State Accepted
Delegated to: Michal Kubecek
Headers show
Series Introduce PHY listing and targeting | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Maxime Chevallier Sept. 6, 2024, 2:57 p.m. UTC
Update to kernel commit 7d3aed652d09.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 uapi/linux/ethtool.h         | 16 ++++++++++++++++
 uapi/linux/ethtool_netlink.h | 25 +++++++++++++++++++++++++
 2 files changed, 41 insertions(+)
diff mbox series

Patch

diff --git a/uapi/linux/ethtool.h b/uapi/linux/ethtool.h
index fef07da..7022fcc 100644
--- a/uapi/linux/ethtool.h
+++ b/uapi/linux/ethtool.h
@@ -2531,4 +2531,20 @@  struct ethtool_link_settings {
 	 * __u32 map_lp_advertising[link_mode_masks_nwords];
 	 */
 };
+
+/**
+ * enum phy_upstream - Represents the upstream component a given PHY device
+ * is connected to, as in what is on the other end of the MII bus. Most PHYs
+ * will be attached to an Ethernet MAC controller, but in some cases, there's
+ * an intermediate PHY used as a media-converter, which will driver another
+ * MII interface as its output.
+ * @PHY_UPSTREAM_MAC: Upstream component is a MAC (a switch port,
+ *		      or ethernet controller)
+ * @PHY_UPSTREAM_PHY: Upstream component is a PHY (likely a media converter)
+ */
+enum phy_upstream {
+	PHY_UPSTREAM_MAC,
+	PHY_UPSTREAM_PHY,
+};
+
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/uapi/linux/ethtool_netlink.h b/uapi/linux/ethtool_netlink.h
index dfc25a0..f865c7c 100644
--- a/uapi/linux/ethtool_netlink.h
+++ b/uapi/linux/ethtool_netlink.h
@@ -58,6 +58,7 @@  enum {
 	ETHTOOL_MSG_MM_GET,
 	ETHTOOL_MSG_MM_SET,
 	ETHTOOL_MSG_MODULE_FW_FLASH_ACT,
+	ETHTOOL_MSG_PHY_GET,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_USER_CNT,
@@ -111,6 +112,8 @@  enum {
 	ETHTOOL_MSG_MM_GET_REPLY,
 	ETHTOOL_MSG_MM_NTF,
 	ETHTOOL_MSG_MODULE_FW_FLASH_NTF,
+	ETHTOOL_MSG_PHY_GET_REPLY,
+	ETHTOOL_MSG_PHY_NTF,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_KERNEL_CNT,
@@ -134,6 +137,7 @@  enum {
 	ETHTOOL_A_HEADER_DEV_INDEX,		/* u32 */
 	ETHTOOL_A_HEADER_DEV_NAME,		/* string */
 	ETHTOOL_A_HEADER_FLAGS,			/* u32 - ETHTOOL_FLAG_* */
+	ETHTOOL_A_HEADER_PHY_INDEX,		/* u32 */
 
 	/* add new constants above here */
 	__ETHTOOL_A_HEADER_CNT,
@@ -556,6 +560,10 @@  enum {
 	 * a regular 100 Ohm cable and a part with the abnormal impedance value
 	 */
 	ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH,
+	/* TDR not possible due to high noise level */
+	ETHTOOL_A_CABLE_RESULT_CODE_NOISE,
+	/* TDR resolution not possible / out of distance */
+	ETHTOOL_A_CABLE_RESULT_CODE_RESOLUTION_NOT_POSSIBLE,
 };
 
 enum {
@@ -965,6 +973,7 @@  enum {
 	ETHTOOL_A_RSS_INDIR,		/* binary */
 	ETHTOOL_A_RSS_HKEY,		/* binary */
 	ETHTOOL_A_RSS_INPUT_XFRM,	/* u32 */
+	ETHTOOL_A_RSS_START_CONTEXT,	/* u32 */
 
 	__ETHTOOL_A_RSS_CNT,
 	ETHTOOL_A_RSS_MAX = (__ETHTOOL_A_RSS_CNT - 1),
@@ -1049,6 +1058,22 @@  enum {
 	ETHTOOL_A_MODULE_FW_FLASH_MAX = (__ETHTOOL_A_MODULE_FW_FLASH_CNT - 1)
 };
 
+enum {
+	ETHTOOL_A_PHY_UNSPEC,
+	ETHTOOL_A_PHY_HEADER,			/* nest - _A_HEADER_* */
+	ETHTOOL_A_PHY_INDEX,			/* u32 */
+	ETHTOOL_A_PHY_DRVNAME,			/* string */
+	ETHTOOL_A_PHY_NAME,			/* string */
+	ETHTOOL_A_PHY_UPSTREAM_TYPE,		/* u32 */
+	ETHTOOL_A_PHY_UPSTREAM_INDEX,		/* u32 */
+	ETHTOOL_A_PHY_UPSTREAM_SFP_NAME,	/* string */
+	ETHTOOL_A_PHY_DOWNSTREAM_SFP_NAME,	/* string */
+
+	/* add new constants above here */
+	__ETHTOOL_A_PHY_CNT,
+	ETHTOOL_A_PHY_MAX = (__ETHTOOL_A_PHY_CNT - 1)
+};
+
 /* generic netlink info */
 #define ETHTOOL_GENL_NAME "ethtool"
 #define ETHTOOL_GENL_VERSION 1