@@ -533,10 +533,6 @@ struct skbuf_dma_descriptor {
* @rxmem: Stores rx memory size for jumbo frame handling.
* @csum_offload_on_tx_path: Stores the checksum selection on TX side.
* @csum_offload_on_rx_path: Stores the checksum selection on RX side.
- * @coalesce_count_rx: Store the irq coalesce on RX side.
- * @coalesce_usec_rx: IRQ coalesce delay for RX
- * @coalesce_count_tx: Store the irq coalesce on TX side.
- * @coalesce_usec_tx: IRQ coalesce delay for TX
* @use_dmaengine: flag to check dmaengine framework usage.
* @tx_chan: TX DMA channel.
* @rx_chan: RX DMA channel.
@@ -617,10 +613,6 @@ struct axienet_local {
int csum_offload_on_tx_path;
int csum_offload_on_rx_path;
- u32 coalesce_count_rx;
- u32 coalesce_usec_rx;
- u32 coalesce_count_tx;
- u32 coalesce_usec_tx;
u8 use_dmaengine;
struct dma_chan *tx_chan;
struct dma_chan *rx_chan;
@@ -223,6 +223,13 @@ static void axienet_dma_bd_release(struct net_device *ndev)
lp->rx_bd_p);
}
+static u64 axienet_dma_rate(struct axienet_local *lp)
+{
+ if (lp->axi_clk)
+ return clk_get_rate(lp->axi_clk);
+ return 125000000; /* arbitrary guess if no clock rate set */
+}
+
/**
* axienet_calc_cr() - Calculate control register value
* @lp: Device private data
@@ -243,12 +250,9 @@ static u32 axienet_calc_cr(struct axienet_local *lp, u32 count, u32 usec)
* the first packet. Otherwise leave at 0 to disable delay interrupt.
*/
if (count > 1) {
- u64 clk_rate = 125000000; /* arbitrary guess if no clock rate set */
+ u64 clk_rate = axienet_dma_rate(lp);
u32 timer;
- if (lp->axi_clk)
- clk_rate = clk_get_rate(lp->axi_clk);
-
/* 1 Timeout Interval = 125 * (clock period of SG clock) */
timer = DIV64_U64_ROUND_CLOSEST((u64)usec * clk_rate,
XAXIDMA_DELAY_SCALE);
@@ -261,6 +265,23 @@ static u32 axienet_calc_cr(struct axienet_local *lp, u32 count, u32 usec)
return cr;
}
+/**
+ * axienet_cr_params() - Extract coalesce parameters from the CR
+ * @lp: Device private data
+ * @cr: The control register to parse
+ * @count: Number of packets before an interrupt
+ * @usec: Idle time (in usec) before an interrupt
+ */
+static void axienet_coalesce_params(struct axienet_local *lp, u32 cr,
+ u32 *count, u32 *usec)
+{
+ u64 clk_rate = axienet_dma_rate(lp);
+ u64 timer = FIELD_GET(XAXIDMA_DELAY_MASK, cr);
+
+ *count = FIELD_GET(XAXIDMA_COALESCE_MASK, cr);
+ *usec = DIV64_U64_ROUND_CLOSEST(timer * XAXIDMA_DELAY_SCALE, clk_rate);
+}
+
/**
* axienet_dma_start - Set up DMA registers and start DMA operation
* @lp: Pointer to the axienet_local structure
@@ -2095,11 +2116,21 @@ axienet_ethtools_get_coalesce(struct net_device *ndev,
struct netlink_ext_ack *extack)
{
struct axienet_local *lp = netdev_priv(ndev);
+ u32 cr;
- ecoalesce->rx_max_coalesced_frames = lp->coalesce_count_rx;
- ecoalesce->rx_coalesce_usecs = lp->coalesce_usec_rx;
- ecoalesce->tx_max_coalesced_frames = lp->coalesce_count_tx;
- ecoalesce->tx_coalesce_usecs = lp->coalesce_usec_tx;
+ spin_lock_irq(&lp->rx_cr_lock);
+ cr = lp->rx_dma_cr;
+ spin_unlock_irq(&lp->rx_cr_lock);
+ axienet_coalesce_params(lp, cr,
+ &ecoalesce->rx_max_coalesced_frames,
+ &ecoalesce->rx_coalesce_usecs);
+
+ spin_lock_irq(&lp->tx_cr_lock);
+ cr = lp->tx_dma_cr;
+ spin_unlock_irq(&lp->tx_cr_lock);
+ axienet_coalesce_params(lp, cr,
+ &ecoalesce->tx_max_coalesced_frames,
+ &ecoalesce->tx_coalesce_usecs);
return 0;
}
@@ -2140,15 +2171,12 @@ axienet_ethtools_set_coalesce(struct net_device *ndev,
return -EINVAL;
}
- lp->coalesce_count_rx = ecoalesce->rx_max_coalesced_frames;
- lp->coalesce_usec_rx = ecoalesce->rx_coalesce_usecs;
- lp->coalesce_count_tx = ecoalesce->tx_max_coalesced_frames;
- lp->coalesce_usec_tx = ecoalesce->tx_coalesce_usecs;
-
- cr = axienet_calc_cr(lp, lp->coalesce_count_rx, lp->coalesce_usec_rx);
+ cr = axienet_calc_cr(lp, ecoalesce->rx_max_coalesced_frames,
+ ecoalesce->rx_coalesce_usecs);
axienet_update_coalesce_rx(lp, cr, ~XAXIDMA_CR_RUNSTOP_MASK);
- cr = axienet_calc_cr(lp, lp->coalesce_count_tx, lp->coalesce_usec_tx);
+ cr = axienet_calc_cr(lp, ecoalesce->tx_max_coalesced_frames,
+ ecoalesce->tx_coalesce_usecs);
axienet_update_coalesce_tx(lp, cr, ~XAXIDMA_CR_RUNSTOP_MASK);
return 0;
}
@@ -2936,14 +2964,10 @@ static int axienet_probe(struct platform_device *pdev)
spin_lock_init(&lp->rx_cr_lock);
spin_lock_init(&lp->tx_cr_lock);
- lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
- lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
- lp->coalesce_usec_rx = XAXIDMA_DFT_RX_USEC;
- lp->coalesce_usec_tx = XAXIDMA_DFT_TX_USEC;
- lp->rx_dma_cr = axienet_calc_cr(lp, lp->coalesce_count_rx,
- lp->coalesce_usec_rx);
- lp->tx_dma_cr = axienet_calc_cr(lp, lp->coalesce_count_tx,
- lp->coalesce_usec_tx);
+ lp->rx_dma_cr = axienet_calc_cr(lp, XAXIDMA_DFT_RX_THRESHOLD,
+ XAXIDMA_DFT_RX_USEC);
+ lp->tx_dma_cr = axienet_calc_cr(lp, XAXIDMA_DFT_TX_THRESHOLD,
+ XAXIDMA_DFT_TX_USEC);
ret = axienet_mdio_setup(lp);
if (ret)
The cr variables now contain the same values as the control registers themselves. Extract/calculate the values from the variables instead of saving the user-specified values. This allows us to remove some bookeeping, and also lets the user know what the actual coalesce settings are. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> --- Changes in v2: - New drivers/net/ethernet/xilinx/xilinx_axienet.h | 8 --- .../net/ethernet/xilinx/xilinx_axienet_main.c | 70 +++++++++++++------ 2 files changed, 47 insertions(+), 31 deletions(-)