diff mbox series

[net-next,v2] dt-bindings: net: realtek: Use proper node names

Message ID 20241004-realtek-bindings-fixup-v2-1-667afa08d184@linaro.org (mailing list archive)
State New
Delegated to: Netdev Maintainers
Headers show
Series [net-next,v2] dt-bindings: net: realtek: Use proper node names | expand

Checks

Context Check Description
netdev/series_format success Single patches do not need cover letters
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 5 this patch: 5
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers warning 2 maintainers not CCed: krzk+dt@kernel.org robh@kernel.org
netdev/build_clang success Errors and warnings before: 5 this patch: 5
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 3 this patch: 3
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 145 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/contest success net-next-2024-10-05--03-00 (tests: 774)

Commit Message

Linus Walleij Oct. 4, 2024, 8:08 a.m. UTC 
We eventually want to get to a place where we fix all DTS files
so that we can simply disallow switch/port/ports without the
ethernet-* prefix so the DTS files are more readable.

Replace:
- switch with ethernet-switch
- ports with ethernet-ports
- port with ethernet-port

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Changes in v2:
- Rebased on v6.12-rc1
- Updated committ message.
- Link to v1: https://lore.kernel.org/r/20240208-realtek-bindings-fixup-v1-1-b1cf7f7e9eed@linaro.org
---
 .../devicetree/bindings/net/dsa/realtek.yaml       | 46 +++++++++++-----------
 1 file changed, 23 insertions(+), 23 deletions(-)


---
base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
change-id: 20240208-realtek-bindings-fixup-1d8ebaf19dba

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
index 70b6bda3cf98..f348e66fb515 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -147,7 +147,7 @@  examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     platform {
-            switch {
+            ethernet-switch {
                     compatible = "realtek,rtl8366rb";
                     /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
                     mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
@@ -163,35 +163,35 @@  examples:
                             #interrupt-cells = <1>;
                     };
 
-                    ports {
+                    ethernet-ports {
                             #address-cells = <1>;
                             #size-cells = <0>;
-                            port@0 {
+                            ethernet-port@0 {
                                     reg = <0>;
                                     label = "lan0";
                                     phy-handle = <&phy0>;
                             };
-                            port@1 {
+                            ethernet-port@1 {
                                     reg = <1>;
                                     label = "lan1";
                                     phy-handle = <&phy1>;
                             };
-                            port@2 {
+                            ethernet-port@2 {
                                     reg = <2>;
                                     label = "lan2";
                                     phy-handle = <&phy2>;
                             };
-                            port@3 {
+                            ethernet-port@3 {
                                     reg = <3>;
                                     label = "lan3";
                                     phy-handle = <&phy3>;
                             };
-                            port@4 {
+                            ethernet-port@4 {
                                     reg = <4>;
                                     label = "wan";
                                     phy-handle = <&phy4>;
                             };
-                            port@5 {
+                            ethernet-port@5 {
                                     reg = <5>;
                                     ethernet = <&gmac0>;
                                     phy-mode = "rgmii";
@@ -241,7 +241,7 @@  examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     platform {
-            switch {
+            ethernet-switch {
                     compatible = "realtek,rtl8365mb";
                     mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
                     mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
@@ -255,30 +255,30 @@  examples:
                             #interrupt-cells = <1>;
                     };
 
-                    ports {
+                    ethernet-ports {
                             #address-cells = <1>;
                             #size-cells = <0>;
-                            port@0 {
+                            ethernet-port@0 {
                                     reg = <0>;
                                     label = "swp0";
                                     phy-handle = <&ethphy0>;
                             };
-                            port@1 {
+                            ethernet-port@1 {
                                     reg = <1>;
                                     label = "swp1";
                                     phy-handle = <&ethphy1>;
                             };
-                            port@2 {
+                            ethernet-port@2 {
                                     reg = <2>;
                                     label = "swp2";
                                     phy-handle = <&ethphy2>;
                             };
-                            port@3 {
+                            ethernet-port@3 {
                                     reg = <3>;
                                     label = "swp3";
                                     phy-handle = <&ethphy3>;
                             };
-                            port@6 {
+                            ethernet-port@6 {
                                     reg = <6>;
                                     ethernet = <&fec1>;
                                     phy-mode = "rgmii";
@@ -330,7 +330,7 @@  examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            switch@29 {
+            ethernet-switch@29 {
                     compatible = "realtek,rtl8365mb";
                     reg = <29>;
 
@@ -344,36 +344,36 @@  examples:
                             #interrupt-cells = <1>;
                     };
 
-                    ports {
+                    ethernet-ports {
                             #address-cells = <1>;
                             #size-cells = <0>;
 
-                            port@0 {
+                            ethernet-port@0 {
                                     reg = <0>;
                                     label = "lan4";
                             };
 
-                            port@1 {
+                            ethernet-port@1 {
                                     reg = <1>;
                                     label = "lan3";
                             };
 
-                            port@2 {
+                            ethernet-port@2 {
                                     reg = <2>;
                                     label = "lan2";
                             };
 
-                            port@3 {
+                            ethernet-port@3 {
                                     reg = <3>;
                                     label = "lan1";
                             };
 
-                            port@4 {
+                            ethernet-port@4 {
                                     reg = <4>;
                                     label = "wan";
                             };
 
-                            port@7 {
+                            ethernet-port@7 {
                                     reg = <7>;
                                     ethernet = <&ethernet>;
                                     phy-mode = "rgmii";