@@ -266,7 +266,7 @@ static int lan865x_revb_config_init(struct phy_device *phydev)
return 0;
}
-static int lan867x_revb1_config_init(struct phy_device *phydev)
+static int lan867x_check_reset_complete(struct phy_device *phydev)
{
int err;
@@ -288,6 +288,17 @@ static int lan867x_revb1_config_init(struct phy_device *phydev)
}
}
+ return 0;
+}
+
+static int lan867x_revb1_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ err = lan867x_check_reset_complete(phydev);
+ if (err)
+ return err;
+
/* Reference to AN1699
* https://ww1.microchip.com/downloads/aemDocuments/documents/AIS/ProductDocuments/SupportingCollateral/AN-LAN8670-1-2-config-60001699.pdf
* AN1699 says Read, Modify, Write, but the Write is not required if the
Move LAN867X reset handling code to a new function called lan867x_check_reset_complete() which will be useful for the next patch which also uses the same code to handle the reset functionality. Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com> --- drivers/net/phy/microchip_t1s.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)