@@ -27,29 +27,6 @@
#include "bcmsysport.h"
-/* I/O accessors register helpers */
-#define BCM_SYSPORT_IO_MACRO(name, offset) \
-static inline u32 name##_readl(struct bcm_sysport_priv *priv, u32 off) \
-{ \
- u32 reg = readl_relaxed(priv->base + offset + off); \
- return reg; \
-} \
-static inline void name##_writel(struct bcm_sysport_priv *priv, \
- u32 val, u32 off) \
-{ \
- writel_relaxed(val, priv->base + offset + off); \
-} \
-
-BCM_SYSPORT_IO_MACRO(intrl2_0, SYS_PORT_INTRL2_0_OFFSET);
-BCM_SYSPORT_IO_MACRO(intrl2_1, SYS_PORT_INTRL2_1_OFFSET);
-BCM_SYSPORT_IO_MACRO(umac, SYS_PORT_UMAC_OFFSET);
-BCM_SYSPORT_IO_MACRO(gib, SYS_PORT_GIB_OFFSET);
-BCM_SYSPORT_IO_MACRO(tdma, SYS_PORT_TDMA_OFFSET);
-BCM_SYSPORT_IO_MACRO(rxchk, SYS_PORT_RXCHK_OFFSET);
-BCM_SYSPORT_IO_MACRO(rbuf, SYS_PORT_RBUF_OFFSET);
-BCM_SYSPORT_IO_MACRO(tbuf, SYS_PORT_TBUF_OFFSET);
-BCM_SYSPORT_IO_MACRO(topctrl, SYS_PORT_TOPCTRL_OFFSET);
-
/* On SYSTEMPORT Lite, any register after RDMA_STATUS has the exact
* same layout, except it has been moved by 4 bytes up, *sigh*
*/
@@ -773,4 +773,28 @@ struct bcm_sysport_priv {
struct bcm_sysport_tx_ring *ring_map[DSA_MAX_PORTS * 8];
};
+
+/* I/O accessors register helpers */
+#define BCM_SYSPORT_IO_MACRO(name, offset) \
+static inline u32 name##_readl(struct bcm_sysport_priv *priv, u32 off) \
+{ \
+ u32 reg = readl_relaxed(priv->base + (offset) + off); \
+ return reg; \
+} \
+static inline void name##_writel(struct bcm_sysport_priv *priv, \
+ u32 val, u32 off) \
+{ \
+ writel_relaxed(val, priv->base + (offset) + off); \
+} \
+
+BCM_SYSPORT_IO_MACRO(intrl2_0, SYS_PORT_INTRL2_0_OFFSET);
+BCM_SYSPORT_IO_MACRO(intrl2_1, SYS_PORT_INTRL2_1_OFFSET);
+BCM_SYSPORT_IO_MACRO(umac, SYS_PORT_UMAC_OFFSET);
+BCM_SYSPORT_IO_MACRO(gib, SYS_PORT_GIB_OFFSET);
+BCM_SYSPORT_IO_MACRO(tdma, SYS_PORT_TDMA_OFFSET);
+BCM_SYSPORT_IO_MACRO(rxchk, SYS_PORT_RXCHK_OFFSET);
+BCM_SYSPORT_IO_MACRO(rbuf, SYS_PORT_RBUF_OFFSET);
+BCM_SYSPORT_IO_MACRO(tbuf, SYS_PORT_TBUF_OFFSET);
+BCM_SYSPORT_IO_MACRO(topctrl, SYS_PORT_TOPCTRL_OFFSET);
+
#endif /* __BCM_SYSPORT_H */
Move the BCM_SYSPORT_IO_MACRO() definition and its use to bcmsysport.h where it is more appropriate and where static inline helpers are acceptable. While at it, make sure that the macro 'offset' argument does not trigger a checkpatch warning due to possible argument re-use. Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> --- drivers/net/ethernet/broadcom/bcmsysport.c | 23 --------------------- drivers/net/ethernet/broadcom/bcmsysport.h | 24 ++++++++++++++++++++++ 2 files changed, 24 insertions(+), 23 deletions(-)