From patchwork Wed Oct 23 12:43:52 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Piotr Kwapulinski X-Patchwork-Id: 13847032 X-Patchwork-Delegate: kuba@kernel.org Received: from mgamail.intel.com (mgamail.intel.com [198.175.65.9]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 776081ACDE8 for ; Wed, 23 Oct 2024 12:45:12 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=198.175.65.9 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1729687516; cv=none; b=BJaBL3tMr8qDpWnXj6kwZT6kXrDQR/FEqbvPn2hwh0Q4q0oCrmPWsvEt1efiLMDBQCRbGYAX2OWPkrdPFQQYJsNtKp+1Sv38qhfEuQRlAKZpKmvZVGYTuG9gBOKFsT0d81fMnz0r4lgtd5aT9pT5h9f9h83eQUhcyu5LFMeJCEY= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1729687516; c=relaxed/simple; bh=dFdLZkzPc4p2WcDxQ0CLsfvDtLs1cfUlrLeSznbQQJg=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=lj4HLZKql85i0c3KWmo1knsI+ahx48PWGLqjcT4daJdRdxzWhhC6dbrCYOdrPaaHG09eK9uTInJj5YjChnXXvIv5BK9S6YBfBiG36p/00AgQNlgJJJ5sSrHeJkHVbpyf/HW1XvLRxrRt51e82JkcaaQSLg/WTol5WeBk10fpig0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=intel.com; spf=pass smtp.mailfrom=intel.com; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b=NT1dASh8; arc=none smtp.client-ip=198.175.65.9 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=intel.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=intel.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b="NT1dASh8" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1729687512; x=1761223512; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=dFdLZkzPc4p2WcDxQ0CLsfvDtLs1cfUlrLeSznbQQJg=; b=NT1dASh87nj7v2TCZIZrRW2kpwBVY0+o9+e/qqzDLR83wb/tIy80uszk 7WoWPrn93SrLN2VS5ZuZYZbdAGi84PE517aGa4WI9zzXCr/JwY7YgvQn7 qmNNt28T+c5ARTAcaN9N8pOchFG199OQETkVTpIgLUeDLF/Re5KTl5TsF 3jiEtizx5TvhaD4tuAB+PLM+M1q5IFmJnAyn2bJNHk0uryXlSwbKaEy8e 0iTSnmE+JNogXmQwZItAVysHM92SyhmHJjdc1h8EyK+JIghhLy7iZiM74 ovDkQKklYVFnK+GUcNVrkP+0BANyD2Yx8HFsFlpRIRvVVdBTx5nuwUwGa w==; X-CSE-ConnectionGUID: 8s9x/FvSQ62JCl6ZeouAwA== X-CSE-MsgGUID: JH2mK/JpQlyIQGyEfnk//A== X-IronPort-AV: E=McAfee;i="6700,10204,11222"; a="51814080" X-IronPort-AV: E=Sophos;i="6.11,199,1725346800"; d="scan'208";a="51814080" Received: from orviesa010.jf.intel.com ([10.64.159.150]) by orvoesa101.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 23 Oct 2024 05:45:12 -0700 X-CSE-ConnectionGUID: a+no+kccS7uk2qn2/vuK8A== X-CSE-MsgGUID: yQe/B8bxRO29Pe7ELzY67Q== X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="6.11,226,1725346800"; d="scan'208";a="80119730" Received: from pkwapuli-mobl1.ger.corp.intel.com (HELO vbox-pkwap.ger.corp.intel.com) ([10.246.19.66]) by orviesa010.jf.intel.com with ESMTP; 23 Oct 2024 05:45:10 -0700 From: Piotr Kwapulinski To: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org, Piotr Kwapulinski , Stefan Wegrzyn , Jedrzej Jagielski , Michal Swiatkowski , Simon Horman Subject: [PATCH iwl-next v10 1/7] ixgbe: Add support for E610 FW Admin Command Interface Date: Wed, 23 Oct 2024 14:43:52 +0200 Message-ID: <20241023124358.6967-2-piotr.kwapulinski@intel.com> X-Mailer: git-send-email 2.43.5 In-Reply-To: <20241023124358.6967-1-piotr.kwapulinski@intel.com> References: <20241023124358.6967-1-piotr.kwapulinski@intel.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Patchwork-Delegate: kuba@kernel.org Add low level support for Admin Command Interface (ACI). ACI is the Firmware interface used by a driver to communicate with E610 adapter. Add the following ACI features: - data structures, macros, register definitions - commands handling - events handling Co-developed-by: Stefan Wegrzyn Signed-off-by: Stefan Wegrzyn Co-developed-by: Jedrzej Jagielski Signed-off-by: Jedrzej Jagielski Reviewed-by: Michal Swiatkowski Reviewed-by: Simon Horman Signed-off-by: Piotr Kwapulinski --- drivers/net/ethernet/intel/ixgbe/Makefile | 4 +- .../net/ethernet/intel/ixgbe/ixgbe_common.c | 6 +- drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c | 495 ++++++++ drivers/net/ethernet/intel/ixgbe/ixgbe_e610.h | 19 + drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 72 +- .../ethernet/intel/ixgbe/ixgbe_type_e610.h | 1066 +++++++++++++++++ 6 files changed, 1655 insertions(+), 7 deletions(-) create mode 100644 drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c create mode 100644 drivers/net/ethernet/intel/ixgbe/ixgbe_e610.h create mode 100644 drivers/net/ethernet/intel/ixgbe/ixgbe_type_e610.h diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile index 965e5ce..b456d10 100644 --- a/drivers/net/ethernet/intel/ixgbe/Makefile +++ b/drivers/net/ethernet/intel/ixgbe/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -# Copyright(c) 1999 - 2018 Intel Corporation. +# Copyright(c) 1999 - 2024 Intel Corporation. # # Makefile for the Intel(R) 10GbE PCI Express ethernet driver # @@ -9,7 +9,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o ixgbe-y := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \ ixgbe_mbx.o ixgbe_x540.o ixgbe_x550.o ixgbe_lib.o ixgbe_ptp.o \ - ixgbe_xsk.o + ixgbe_xsk.o ixgbe_e610.o ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ ixgbe_dcb_82599.o ixgbe_dcb_nl.o diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 3be1bfb..bfab2c0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -660,7 +660,11 @@ int ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) hw->bus.type = ixgbe_bus_type_pci_express; /* Get the negotiated link width and speed from PCI config space */ - link_status = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_LINK_STATUS); + if (hw->mac.type == ixgbe_mac_e610) + link_status = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_LINK_STATUS_E610); + else + link_status = ixgbe_read_pci_cfg_word(hw, + IXGBE_PCI_LINK_STATUS); hw->bus.width = ixgbe_convert_bus_width(link_status); hw->bus.speed = ixgbe_convert_bus_speed(link_status); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c new file mode 100644 index 0000000..28bd7da --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c @@ -0,0 +1,495 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 2024 Intel Corporation. */ + +#include "ixgbe_common.h" +#include "ixgbe_e610.h" +#include "ixgbe_type.h" +#include "ixgbe_x540.h" +#include "ixgbe_phy.h" + +/** + * ixgbe_should_retry_aci_send_cmd_execute - decide if ACI command should + * be resent + * @opcode: ACI opcode + * + * Check if ACI command should be sent again depending on the provided opcode. + * It may happen when CSR is busy during link state changes. + * + * Return: true if the sending command routine should be repeated, + * otherwise false. + */ +static bool ixgbe_should_retry_aci_send_cmd_execute(u16 opcode) +{ + switch (opcode) { + case ixgbe_aci_opc_disable_rxen: + case ixgbe_aci_opc_get_phy_caps: + case ixgbe_aci_opc_get_link_status: + case ixgbe_aci_opc_get_link_topo: + return true; + } + + return false; +} + +/** + * ixgbe_aci_send_cmd_execute - execute sending FW Admin Command to FW Admin + * Command Interface + * @hw: pointer to the HW struct + * @desc: descriptor describing the command + * @buf: buffer to use for indirect commands (NULL for direct commands) + * @buf_size: size of buffer for indirect commands (0 for direct commands) + * + * Admin Command is sent using CSR by setting descriptor and buffer in specific + * registers. + * + * Return: the exit code of the operation. + * * - 0 - success. + * * - -EIO - CSR mechanism is not enabled. + * * - -EBUSY - CSR mechanism is busy. + * * - -EINVAL - buf_size is too big or + * invalid argument buf or buf_size. + * * - -ETIME - Admin Command X command timeout. + * * - -EIO - Admin Command X invalid state of HICR register or + * Admin Command failed because of bad opcode was returned or + * Admin Command failed with error Y. + */ +static int ixgbe_aci_send_cmd_execute(struct ixgbe_hw *hw, + struct ixgbe_aci_desc *desc, + void *buf, u16 buf_size) +{ + u16 opcode, buf_tail_size = buf_size % 4; + u32 *raw_desc = (u32 *)desc; + u32 hicr, i, buf_tail = 0; + bool valid_buf = false; + + hw->aci.last_status = IXGBE_ACI_RC_OK; + + /* It's necessary to check if mechanism is enabled */ + hicr = IXGBE_READ_REG(hw, IXGBE_PF_HICR); + + if (!(hicr & IXGBE_PF_HICR_EN)) + return -EIO; + + if (hicr & IXGBE_PF_HICR_C) { + hw->aci.last_status = IXGBE_ACI_RC_EBUSY; + return -EBUSY; + } + + opcode = desc->opcode; + + if (buf_size > IXGBE_ACI_MAX_BUFFER_SIZE) + return -EINVAL; + + if (buf) + desc->flags |= IXGBE_ACI_FLAG_BUF; + + if (desc->flags & IXGBE_ACI_FLAG_BUF) { + if ((buf && !buf_size) || + (!buf && buf_size)) + return -EINVAL; + if (buf && buf_size) + valid_buf = true; + } + + if (valid_buf) { + if (buf_tail_size) + memcpy(&buf_tail, buf + buf_size - buf_tail_size, + buf_tail_size); + + if (((buf_size + 3) & ~0x3) > IXGBE_ACI_LG_BUF) + desc->flags |= IXGBE_ACI_FLAG_LB; + + desc->datalen = buf_size; + + if (desc->flags & IXGBE_ACI_FLAG_RD) { + for (i = 0; i < buf_size / 4; i++) + IXGBE_WRITE_REG(hw, IXGBE_PF_HIBA(i), ((u32 *)buf)[i]); + if (buf_tail_size) + IXGBE_WRITE_REG(hw, IXGBE_PF_HIBA(i), buf_tail); + } + } + + /* Descriptor is written to specific registers */ + for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++) + IXGBE_WRITE_REG(hw, IXGBE_PF_HIDA(i), raw_desc[i]); + + /* SW has to set PF_HICR.C bit and clear PF_HICR.SV and + * PF_HICR_EV + */ + hicr = (IXGBE_READ_REG(hw, IXGBE_PF_HICR) | IXGBE_PF_HICR_C) & + ~(IXGBE_PF_HICR_SV | IXGBE_PF_HICR_EV); + IXGBE_WRITE_REG(hw, IXGBE_PF_HICR, hicr); + +#define MAX_SLEEP_RESP_US 1000 +#define MAX_TMOUT_RESP_SYNC_US 100000000 + + /* Wait for sync Admin Command response */ + read_poll_timeout(IXGBE_READ_REG, hicr, + (hicr & IXGBE_PF_HICR_SV) || + !(hicr & IXGBE_PF_HICR_C), + MAX_SLEEP_RESP_US, MAX_TMOUT_RESP_SYNC_US, true, hw, + IXGBE_PF_HICR); + +#define MAX_TMOUT_RESP_ASYNC_US 150000000 + + /* Wait for async Admin Command response */ + read_poll_timeout(IXGBE_READ_REG, hicr, + (hicr & IXGBE_PF_HICR_EV) || + !(hicr & IXGBE_PF_HICR_C), + MAX_SLEEP_RESP_US, MAX_TMOUT_RESP_ASYNC_US, true, hw, + IXGBE_PF_HICR); + + /* Read sync Admin Command response */ + if ((hicr & IXGBE_PF_HICR_SV)) { + for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++) { + raw_desc[i] = IXGBE_READ_REG(hw, IXGBE_PF_HIDA(i)); + raw_desc[i] = raw_desc[i]; + } + } + + /* Read async Admin Command response */ + if ((hicr & IXGBE_PF_HICR_EV) && !(hicr & IXGBE_PF_HICR_C)) { + for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++) { + raw_desc[i] = IXGBE_READ_REG(hw, IXGBE_PF_HIDA_2(i)); + raw_desc[i] = raw_desc[i]; + } + } + + /* Handle timeout and invalid state of HICR register */ + if (hicr & IXGBE_PF_HICR_C) + return -ETIME; + + if (!(hicr & IXGBE_PF_HICR_SV) && !(hicr & IXGBE_PF_HICR_EV)) + return -EIO; + + /* For every command other than 0x0014 treat opcode mismatch + * as an error. Response to 0x0014 command read from HIDA_2 + * is a descriptor of an event which is expected to contain + * different opcode than the command. + */ + if (desc->opcode != opcode && + opcode != ixgbe_aci_opc_get_fw_event) + return -EIO; + + if (desc->retval) { + hw->aci.last_status = (enum ixgbe_aci_err)desc->retval; + return -EIO; + } + + /* Write a response values to a buf */ + if (valid_buf) { + for (i = 0; i < buf_size / 4; i++) + ((u32 *)buf)[i] = IXGBE_READ_REG(hw, IXGBE_PF_HIBA(i)); + if (buf_tail_size) { + buf_tail = IXGBE_READ_REG(hw, IXGBE_PF_HIBA(i)); + memcpy(buf + buf_size - buf_tail_size, &buf_tail, + buf_tail_size); + } + } + + return 0; +} + +/** + * ixgbe_aci_send_cmd - send FW Admin Command to FW Admin Command Interface + * @hw: pointer to the HW struct + * @desc: descriptor describing the command + * @buf: buffer to use for indirect commands (NULL for direct commands) + * @buf_size: size of buffer for indirect commands (0 for direct commands) + * + * Helper function to send FW Admin Commands to the FW Admin Command Interface. + * + * Retry sending the FW Admin Command multiple times to the FW ACI + * if the EBUSY Admin Command error is returned. + * + * Return: the exit code of the operation. + */ +int ixgbe_aci_send_cmd(struct ixgbe_hw *hw, struct ixgbe_aci_desc *desc, + void *buf, u16 buf_size) +{ + u8 idx = 0, *buf_cpy __free(kfree) = NULL; + struct ixgbe_aci_desc desc_cpy; + enum ixgbe_aci_err last_status; + u16 opcode = desc->opcode; + bool is_cmd_for_retry; + unsigned long timeout; + int err; + + is_cmd_for_retry = ixgbe_should_retry_aci_send_cmd_execute(opcode); + + if (is_cmd_for_retry) { + if (buf) { + buf_cpy = kmalloc(buf_size, GFP_KERNEL); + if (!buf_cpy) + return -ENOMEM; + *buf_cpy = *(u8 *)buf; + } + desc_cpy = *desc; + } + + timeout = jiffies + msecs_to_jiffies(IXGBE_ACI_SEND_TIMEOUT_MS); + do { + mutex_lock(&hw->aci.lock); + err = ixgbe_aci_send_cmd_execute(hw, desc, buf, buf_size); + last_status = hw->aci.last_status; + mutex_unlock(&hw->aci.lock); + + if (!is_cmd_for_retry || !err || + last_status != IXGBE_ACI_RC_EBUSY) + break; + + if (buf) + memcpy(buf, buf_cpy, buf_size); + *desc = desc_cpy; + + msleep(IXGBE_ACI_SEND_DELAY_TIME_MS); + } while (++idx < IXGBE_ACI_SEND_MAX_EXECUTE && + time_before(jiffies, timeout)); + + return err; +} + +/** + * ixgbe_aci_check_event_pending - check if there are any pending events + * @hw: pointer to the HW struct + * + * Determine if there are any pending events. + * + * Return: true if there are any currently pending events + * otherwise false. + */ +bool ixgbe_aci_check_event_pending(struct ixgbe_hw *hw) +{ + u32 ep_bit_mask = hw->bus.func ? GL_FWSTS_EP_PF1 : GL_FWSTS_EP_PF0; + u32 fwsts = IXGBE_READ_REG(hw, GL_FWSTS); + + return (fwsts & ep_bit_mask) ? true : false; +} + +/** + * ixgbe_aci_get_event - get an event from ACI + * @hw: pointer to the HW struct + * @e: event information structure + * @pending: optional flag signaling that there are more pending events + * + * Obtain an event from ACI and return its content + * through 'e' using ACI command (0x0014). + * Provide information if there are more events + * to retrieve through 'pending'. + * + * Return: the exit code of the operation. + */ +int ixgbe_aci_get_event(struct ixgbe_hw *hw, struct ixgbe_aci_event *e, + bool *pending) +{ + struct ixgbe_aci_desc desc; + int err; + + if (!e || (!e->msg_buf && e->buf_len)) + return -EINVAL; + + mutex_lock(&hw->aci.lock); + + /* Check if there are any events pending */ + if (!ixgbe_aci_check_event_pending(hw)) { + err = -ENOENT; + goto aci_get_event_exit; + } + + /* Obtain pending event */ + ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_fw_event); + err = ixgbe_aci_send_cmd_execute(hw, &desc, e->msg_buf, e->buf_len); + if (err) + goto aci_get_event_exit; + + /* Returned 0x0014 opcode indicates that no event was obtained */ + if (desc.opcode == ixgbe_aci_opc_get_fw_event) { + err = -ENOENT; + goto aci_get_event_exit; + } + + /* Determine size of event data */ + e->msg_len = min_t(u16, desc.datalen, e->buf_len); + /* Write event descriptor to event info structure */ + memcpy(&e->desc, &desc, sizeof(e->desc)); + + /* Check if there are any further events pending */ + if (pending) + *pending = ixgbe_aci_check_event_pending(hw); + +aci_get_event_exit: + mutex_unlock(&hw->aci.lock); + + return err; +} + +/** + * ixgbe_fill_dflt_direct_cmd_desc - fill ACI descriptor with default values. + * @desc: pointer to the temp descriptor (non DMA mem) + * @opcode: the opcode can be used to decide which flags to turn off or on + * + * Helper function to fill the descriptor desc with default values + * and the provided opcode. + */ +void ixgbe_fill_dflt_direct_cmd_desc(struct ixgbe_aci_desc *desc, u16 opcode) +{ + /* Zero out the desc. */ + memset(desc, 0, sizeof(*desc)); + desc->opcode = opcode; + desc->flags = IXGBE_ACI_FLAG_SI; +} + +/** + * ixgbe_aci_req_res - request a common resource + * @hw: pointer to the HW struct + * @res: resource ID + * @access: access type + * @sdp_number: resource number + * @timeout: the maximum time in ms that the driver may hold the resource + * + * Requests a common resource using the ACI command (0x0008). + * Specifies the maximum time the driver may hold the resource. + * If the requested resource is currently occupied by some other driver, + * a busy return value is returned and the timeout field value indicates the + * maximum time the current owner has to free it. + * + * Return: the exit code of the operation. + */ +static int ixgbe_aci_req_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res, + enum ixgbe_aci_res_access_type access, + u8 sdp_number, u32 *timeout) +{ + struct ixgbe_aci_cmd_req_res *cmd_resp; + struct ixgbe_aci_desc desc; + int err; + + cmd_resp = &desc.params.res_owner; + + ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_req_res); + + cmd_resp->res_id = res; + cmd_resp->access_type = access; + cmd_resp->res_number = sdp_number; + cmd_resp->timeout = *timeout; + *timeout = 0; + + err = ixgbe_aci_send_cmd(hw, &desc, NULL, 0); + + /* If the resource is held by some other driver, the command completes + * with a busy return value and the timeout field indicates the maximum + * time the current owner of the resource has to free it. + */ + if (!err || hw->aci.last_status == IXGBE_ACI_RC_EBUSY) + *timeout = cmd_resp->timeout; + + return err; +} + +/** + * ixgbe_aci_release_res - release a common resource using ACI + * @hw: pointer to the HW struct + * @res: resource ID + * @sdp_number: resource number + * + * Release a common resource using ACI command (0x0009). + * + * Return: the exit code of the operation. + */ +static int ixgbe_aci_release_res(struct ixgbe_hw *hw, + enum ixgbe_aci_res_ids res, u8 sdp_number) +{ + struct ixgbe_aci_cmd_req_res *cmd; + struct ixgbe_aci_desc desc; + + cmd = &desc.params.res_owner; + + ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_release_res); + + cmd->res_id = res; + cmd->res_number = sdp_number; + + return ixgbe_aci_send_cmd(hw, &desc, NULL, 0); +} + +/** + * ixgbe_acquire_res - acquire the ownership of a resource + * @hw: pointer to the HW structure + * @res: resource ID + * @access: access type (read or write) + * @timeout: timeout in milliseconds + * + * Make an attempt to acquire the ownership of a resource using + * the ixgbe_aci_req_res to utilize ACI. + * In case if some other driver has previously acquired the resource and + * performed any necessary updates, the -EALREADY is returned, + * and the caller does not obtain the resource and has no further work to do. + * If needed, the function will poll until the current lock owner timeouts. + * + * Return: the exit code of the operation. + */ +int ixgbe_acquire_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res, + enum ixgbe_aci_res_access_type access, u32 timeout) +{ +#define IXGBE_RES_POLLING_DELAY_MS 10 + u32 delay = IXGBE_RES_POLLING_DELAY_MS; + u32 res_timeout = timeout; + u32 retry_timeout; + int err; + + err = ixgbe_aci_req_res(hw, res, access, 0, &res_timeout); + + /* A return code of -EALREADY means that another driver has + * previously acquired the resource and performed any necessary updates; + * in this case the caller does not obtain the resource and has no + * further work to do. + */ + if (err == -EALREADY) + return err; + + /* If necessary, poll until the current lock owner timeouts. + * Set retry_timeout to the timeout value reported by the FW in the + * response to the "Request Resource Ownership" (0x0008) Admin Command + * as it indicates the maximum time the current owner of the resource + * is allowed to hold it. + */ + retry_timeout = res_timeout; + while (err && retry_timeout && res_timeout) { + msleep(delay); + retry_timeout = (retry_timeout > delay) ? + retry_timeout - delay : 0; + err = ixgbe_aci_req_res(hw, res, access, 0, &res_timeout); + + /* Success - lock acquired. + * -EALREADY - lock free, no work to do. + */ + if (!err || err == -EALREADY) + break; + } + + return err; +} + +/** + * ixgbe_release_res - release a common resource + * @hw: pointer to the HW structure + * @res: resource ID + * + * Release a common resource using ixgbe_aci_release_res. + */ +void ixgbe_release_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res) +{ + u32 total_delay = 0; + int err; + + err = ixgbe_aci_release_res(hw, res, 0); + + /* There are some rare cases when trying to release the resource + * results in an admin command timeout, so handle them correctly. + */ + while (err == -ETIME && + total_delay < IXGBE_ACI_RELEASE_RES_TIMEOUT) { + usleep_range(1000, 1500); + err = ixgbe_aci_release_res(hw, res, 0); + total_delay++; + } +} diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.h new file mode 100644 index 0000000..18b831b --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright(c) 2024 Intel Corporation. */ + +#ifndef _IXGBE_E610_H_ +#define _IXGBE_E610_H_ + +#include "ixgbe_type.h" + +int ixgbe_aci_send_cmd(struct ixgbe_hw *hw, struct ixgbe_aci_desc *desc, + void *buf, u16 buf_size); +bool ixgbe_aci_check_event_pending(struct ixgbe_hw *hw); +int ixgbe_aci_get_event(struct ixgbe_hw *hw, struct ixgbe_aci_event *e, + bool *pending); +void ixgbe_fill_dflt_direct_cmd_desc(struct ixgbe_aci_desc *desc, u16 opcode); +int ixgbe_acquire_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res, + enum ixgbe_aci_res_access_type access, u32 timeout); +void ixgbe_release_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res); + +#endif /* _IXGBE_E610_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 346e3d9..4188b8c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright(c) 1999 - 2018 Intel Corporation. */ +/* Copyright(c) 1999 - 2024 Intel Corporation. */ #ifndef _IXGBE_TYPE_H_ #define _IXGBE_TYPE_H_ @@ -7,6 +7,7 @@ #include #include #include +#include "ixgbe_type_e610.h" /* Device IDs */ #define IXGBE_DEV_ID_82598 0x10B6 @@ -71,12 +72,19 @@ #define IXGBE_DEV_ID_X550EM_A_1G_T 0x15E4 #define IXGBE_DEV_ID_X550EM_A_1G_T_L 0x15E5 +#define IXGBE_DEV_ID_E610_BACKPLANE 0x57AE +#define IXGBE_DEV_ID_E610_SFP 0x57AF +#define IXGBE_DEV_ID_E610_10G_T 0x57B0 +#define IXGBE_DEV_ID_E610_2_5G_T 0x57B1 +#define IXGBE_DEV_ID_E610_SGMII 0x57B2 + /* VF Device IDs */ #define IXGBE_DEV_ID_82599_VF 0x10ED #define IXGBE_DEV_ID_X540_VF 0x1515 #define IXGBE_DEV_ID_X550_VF 0x1565 #define IXGBE_DEV_ID_X550EM_X_VF 0x15A8 #define IXGBE_DEV_ID_X550EM_A_VF 0x15C5 +#define IXGBE_DEV_ID_E610_VF 0x57AD #define IXGBE_CAT(r, m) IXGBE_##r##_##m @@ -1600,7 +1608,7 @@ enum { #define IXGBE_EICR_PCI 0x00040000 /* PCI Exception */ #define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */ #define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */ -#define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */ +#define IXGBE_EICR_FW_EVENT 0x00200000 /* Async FW event */ #define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */ #define IXGBE_EICR_TS 0x00800000 /* Thermal Sensor Event */ #define IXGBE_EICR_TIMESYNC 0x01000000 /* Timesync Event */ @@ -1636,6 +1644,7 @@ enum { #define IXGBE_EICS_PCI IXGBE_EICR_PCI /* PCI Exception */ #define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ #define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EICS_FW_EVENT IXGBE_EICR_FW_EVENT /* Async FW event */ #define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ #define IXGBE_EICS_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */ #define IXGBE_EICS_GPI_SDP0(_hw) IXGBE_EICR_GPI_SDP0(_hw) @@ -1654,6 +1663,7 @@ enum { #define IXGBE_EIMS_PCI IXGBE_EICR_PCI /* PCI Exception */ #define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ #define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EIMS_FW_EVENT IXGBE_EICR_FW_EVENT /* Async FW event */ #define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ #define IXGBE_EIMS_TS IXGBE_EICR_TS /* Thermel Sensor Event */ #define IXGBE_EIMS_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */ @@ -1673,6 +1683,7 @@ enum { #define IXGBE_EIMC_PCI IXGBE_EICR_PCI /* PCI Exception */ #define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ #define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EIMC_FW_EVENT IXGBE_EICR_FW_EVENT /* Async FW event */ #define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ #define IXGBE_EIMC_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */ #define IXGBE_EIMC_GPI_SDP0(_hw) IXGBE_EICR_GPI_SDP0(_hw) @@ -2068,6 +2079,7 @@ enum { #define IXGBE_SAN_MAC_ADDR_PTR 0x28 #define IXGBE_DEVICE_CAPS 0x2C #define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11 +#define IXGBE_PCIE_MSIX_E610_CAPS 0xB2 #define IXGBE_PCIE_MSIX_82599_CAPS 0x72 #define IXGBE_MAX_MSIX_VECTORS_82599 0x40 #define IXGBE_PCIE_MSIX_82598_CAPS 0x62 @@ -2168,6 +2180,7 @@ enum { #define IXGBE_PCI_DEVICE_STATUS 0xAA #define IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING 0x0020 #define IXGBE_PCI_LINK_STATUS 0xB2 +#define IXGBE_PCI_LINK_STATUS_E610 0x82 #define IXGBE_PCI_DEVICE_CONTROL2 0xC8 #define IXGBE_PCI_LINK_WIDTH 0x3F0 #define IXGBE_PCI_LINK_WIDTH_1 0x10 @@ -2288,6 +2301,7 @@ enum { #define IXGBE_RXMTRL_V2_MGMT_MSG 0x0D00 #define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */ +#define IXGBE_FCTRL_TPE 0x00000080 /* Tag Promiscuous Ena*/ #define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/ #define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */ #define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */ @@ -2351,6 +2365,7 @@ enum { /* Multiple Transmit Queue Command Register */ #define IXGBE_MTQC_RT_ENA 0x1 /* DCB Enable */ #define IXGBE_MTQC_VT_ENA 0x2 /* VMDQ2 Enable */ +#define IXGBE_MTQC_NUM_TC_OR_Q 0xC /* Number of TCs or TxQs per pool */ #define IXGBE_MTQC_64Q_1PB 0x0 /* 64 queues 1 pack buffer */ #define IXGBE_MTQC_32VF 0x8 /* 4 TX Queues per pool w/32VF's */ #define IXGBE_MTQC_64VF 0x4 /* 2 TX Queues per pool w/64VF's */ @@ -2970,6 +2985,29 @@ typedef u32 ixgbe_link_speed; IXGBE_LINK_SPEED_1GB_FULL | \ IXGBE_LINK_SPEED_10GB_FULL) +/* Physical layer type */ +typedef u64 ixgbe_physical_layer; +#define IXGBE_PHYSICAL_LAYER_UNKNOWN 0 +#define IXGBE_PHYSICAL_LAYER_10GBASE_T 0x00001 +#define IXGBE_PHYSICAL_LAYER_1000BASE_T 0x00002 +#define IXGBE_PHYSICAL_LAYER_100BASE_TX 0x00004 +#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU 0x00008 +#define IXGBE_PHYSICAL_LAYER_10GBASE_LR 0x00010 +#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM 0x00020 +#define IXGBE_PHYSICAL_LAYER_10GBASE_SR 0x00040 +#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4 0x00080 +#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4 0x00100 +#define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x00200 +#define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x00400 +#define IXGBE_PHYSICAL_LAYER_10GBASE_KR 0x00800 +#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x01000 +#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x02000 +#define IXGBE_PHYSICAL_LAYER_1000BASE_SX 0x04000 +#define IXGBE_PHYSICAL_LAYER_10BASE_T 0x08000 +#define IXGBE_PHYSICAL_LAYER_2500BASE_KX 0x10000 +#define IXGBE_PHYSICAL_LAYER_2500BASE_T 0x20000 +#define IXGBE_PHYSICAL_LAYER_5000BASE_T 0x40000 + /* Flow Control Data Sheet defined values * Calculation and defines taken from 802.1bb Annex O */ @@ -3145,6 +3183,8 @@ enum ixgbe_mac_type { ixgbe_mac_X550, ixgbe_mac_X550EM_x, ixgbe_mac_x550em_a, + ixgbe_mac_e610, + ixgbe_mac_e610_vf, ixgbe_num_macs }; @@ -3224,7 +3264,9 @@ enum ixgbe_media_type { ixgbe_media_type_copper, ixgbe_media_type_backplane, ixgbe_media_type_cx4, - ixgbe_media_type_virtual + ixgbe_media_type_virtual, + ixgbe_media_type_da, + ixgbe_media_type_aui, }; /* Flow Control Settings */ @@ -3233,7 +3275,8 @@ enum ixgbe_fc_mode { ixgbe_fc_rx_pause, ixgbe_fc_tx_pause, ixgbe_fc_full, - ixgbe_fc_default + ixgbe_fc_default, + ixgbe_fc_pfc, }; /* Smart Speed Settings */ @@ -3533,6 +3576,9 @@ struct ixgbe_link_operations { struct ixgbe_link_info { struct ixgbe_link_operations ops; u8 addr; + struct ixgbe_link_status link_info; + struct ixgbe_link_status link_info_old; + u8 get_link_info; }; struct ixgbe_eeprom_info { @@ -3575,6 +3621,7 @@ struct ixgbe_mac_info { u8 san_mac_rar_index; struct ixgbe_thermal_sensor_data thermal_sensor_data; bool set_lben; + u32 max_link_up_time; u8 led_link_act; }; @@ -3599,6 +3646,10 @@ struct ixgbe_phy_info { bool reset_if_overtemp; bool qsfp_shared_i2c_bus; u32 nw_mng_if_sel; + u64 phy_type_low; + u64 phy_type_high; + u16 curr_user_speed_req; + struct ixgbe_aci_cmd_set_phy_cfg_data curr_user_phy_cfg; }; #include "ixgbe_mbx.h" @@ -3654,6 +3705,19 @@ struct ixgbe_hw { bool allow_unsupported_sfp; bool wol_enabled; bool need_crosstalk_fix; + u8 api_branch; + u8 api_maj_ver; + u8 api_min_ver; + u8 api_patch; + u8 fw_branch; + u8 fw_maj_ver; + u8 fw_min_ver; + u8 fw_patch; + u32 fw_build; + struct ixgbe_aci_info aci; + struct ixgbe_flash_info flash; + struct ixgbe_hw_dev_caps dev_caps; + struct ixgbe_hw_func_caps func_caps; }; struct ixgbe_info { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type_e610.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type_e610.h new file mode 100644 index 0000000..6c6d990 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type_e610.h @@ -0,0 +1,1066 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright(c) 2024 Intel Corporation. */ + +#ifndef _IXGBE_TYPE_E610_H_ +#define _IXGBE_TYPE_E610_H_ + +#define BYTES_PER_DWORD 4 + +/* General E610 defines */ +#define IXGBE_MAX_VSI 768 + +/* Checksum and Shadow RAM pointers */ +#define E610_SR_SW_CHECKSUM_WORD 0x3F + +/* Firmware Status Register (GL_FWSTS) */ +#define GL_FWSTS 0x00083048 /* Reset Source: POR */ +#define GL_FWSTS_EP_PF0 BIT(24) +#define GL_FWSTS_EP_PF1 BIT(25) + +/* Flash Access Register */ +#define IXGBE_GLNVM_FLA 0x000B6108 /* Reset Source: POR */ +#define IXGBE_GLNVM_FLA_LOCKED_S 6 +#define IXGBE_GLNVM_FLA_LOCKED_M BIT(6) + +/* Admin Command Interface (ACI) registers */ +#define IXGBE_PF_HIDA(_i) (0x00085000 + ((_i) * 4)) +#define IXGBE_PF_HIDA_2(_i) (0x00085020 + ((_i) * 4)) +#define IXGBE_PF_HIBA(_i) (0x00084000 + ((_i) * 4)) +#define IXGBE_PF_HICR 0x00082048 + +#define IXGBE_PF_HICR_EN BIT(0) +#define IXGBE_PF_HICR_C BIT(1) +#define IXGBE_PF_HICR_SV BIT(2) +#define IXGBE_PF_HICR_EV BIT(3) + +#define IXGBE_ACI_DESC_SIZE 32 +#define IXGBE_ACI_DESC_SIZE_IN_DWORDS (IXGBE_ACI_DESC_SIZE / BYTES_PER_DWORD) + +#define IXGBE_ACI_MAX_BUFFER_SIZE 4096 /* Size in bytes */ +#define IXGBE_ACI_SEND_DELAY_TIME_MS 10 +#define IXGBE_ACI_SEND_MAX_EXECUTE 3 +#define IXGBE_ACI_SEND_TIMEOUT_MS \ + (IXGBE_ACI_SEND_MAX_EXECUTE * IXGBE_ACI_SEND_DELAY_TIME_MS) +/* [ms] timeout of waiting for sync response */ +#define IXGBE_ACI_SYNC_RESPONSE_TIMEOUT 100000 +/* [ms] timeout of waiting for async response */ +#define IXGBE_ACI_ASYNC_RESPONSE_TIMEOUT 150000 +/* [ms] timeout of waiting for resource release */ +#define IXGBE_ACI_RELEASE_RES_TIMEOUT 10000 + +/* FW defined boundary for a large buffer, 4k >= Large buffer > 512 bytes */ +#define IXGBE_ACI_LG_BUF 512 + +/* Flags sub-structure + * |0 |1 |2 |3 |4 |5 |6 |7 |8 |9 |10 |11 |12 |13 |14 |15 | + * |DD |CMP|ERR|VFE| * * RESERVED * * |LB |RD |VFC|BUF|SI |EI |FE | + */ + +#define IXGBE_ACI_FLAG_DD BIT(0) /* 0x1 */ +#define IXGBE_ACI_FLAG_CMP BIT(1) /* 0x2 */ +#define IXGBE_ACI_FLAG_ERR BIT(2) /* 0x4 */ +#define IXGBE_ACI_FLAG_VFE BIT(3) /* 0x8 */ +#define IXGBE_ACI_FLAG_LB BIT(9) /* 0x200 */ +#define IXGBE_ACI_FLAG_RD BIT(10) /* 0x400 */ +#define IXGBE_ACI_FLAG_VFC BIT(11) /* 0x800 */ +#define IXGBE_ACI_FLAG_BUF BIT(12) /* 0x1000 */ +#define IXGBE_ACI_FLAG_SI BIT(13) /* 0x2000 */ +#define IXGBE_ACI_FLAG_EI BIT(14) /* 0x4000 */ +#define IXGBE_ACI_FLAG_FE BIT(15) /* 0x8000 */ + +/* Admin Command Interface (ACI) error codes */ +enum ixgbe_aci_err { + IXGBE_ACI_RC_OK = 0, /* Success */ + IXGBE_ACI_RC_EPERM = 1, /* Operation not permitted */ + IXGBE_ACI_RC_ENOENT = 2, /* No such element */ + IXGBE_ACI_RC_ESRCH = 3, /* Bad opcode */ + IXGBE_ACI_RC_EINTR = 4, /* Operation interrupted */ + IXGBE_ACI_RC_EIO = 5, /* I/O error */ + IXGBE_ACI_RC_ENXIO = 6, /* No such resource */ + IXGBE_ACI_RC_E2BIG = 7, /* Arg too long */ + IXGBE_ACI_RC_EAGAIN = 8, /* Try again */ + IXGBE_ACI_RC_ENOMEM = 9, /* Out of memory */ + IXGBE_ACI_RC_EACCES = 10, /* Permission denied */ + IXGBE_ACI_RC_EFAULT = 11, /* Bad address */ + IXGBE_ACI_RC_EBUSY = 12, /* Device or resource busy */ + IXGBE_ACI_RC_EEXIST = 13, /* Object already exists */ + IXGBE_ACI_RC_EINVAL = 14, /* Invalid argument */ + IXGBE_ACI_RC_ENOTTY = 15, /* Not a typewriter */ + IXGBE_ACI_RC_ENOSPC = 16, /* No space left or alloc failure */ + IXGBE_ACI_RC_ENOSYS = 17, /* Function not implemented */ + IXGBE_ACI_RC_ERANGE = 18, /* Parameter out of range */ + IXGBE_ACI_RC_EFLUSHED = 19, /* Cmd flushed due to prev cmd error */ + IXGBE_ACI_RC_BAD_ADDR = 20, /* Descriptor contains a bad pointer */ + IXGBE_ACI_RC_EMODE = 21, /* Op not allowed in current dev mode */ + IXGBE_ACI_RC_EFBIG = 22, /* File too big */ + IXGBE_ACI_RC_ESBCOMP = 23, /* SB-IOSF completion unsuccessful */ + IXGBE_ACI_RC_ENOSEC = 24, /* Missing security manifest */ + IXGBE_ACI_RC_EBADSIG = 25, /* Bad RSA signature */ + IXGBE_ACI_RC_ESVN = 26, /* SVN number prohibits this package */ + IXGBE_ACI_RC_EBADMAN = 27, /* Manifest hash mismatch */ + IXGBE_ACI_RC_EBADBUF = 28, /* Buffer hash mismatches manifest */ + IXGBE_ACI_RC_EACCES_BMCU = 29, /* BMC Update in progress */ +}; + +/* Admin Command Interface (ACI) opcodes */ +enum ixgbe_aci_opc { + ixgbe_aci_opc_get_ver = 0x0001, + ixgbe_aci_opc_driver_ver = 0x0002, + ixgbe_aci_opc_get_exp_err = 0x0005, + + /* resource ownership */ + ixgbe_aci_opc_req_res = 0x0008, + ixgbe_aci_opc_release_res = 0x0009, + + /* device/function capabilities */ + ixgbe_aci_opc_list_func_caps = 0x000A, + ixgbe_aci_opc_list_dev_caps = 0x000B, + + /* safe disable of RXEN */ + ixgbe_aci_opc_disable_rxen = 0x000C, + + /* FW events */ + ixgbe_aci_opc_get_fw_event = 0x0014, + + /* PHY commands */ + ixgbe_aci_opc_get_phy_caps = 0x0600, + ixgbe_aci_opc_set_phy_cfg = 0x0601, + ixgbe_aci_opc_restart_an = 0x0605, + ixgbe_aci_opc_get_link_status = 0x0607, + ixgbe_aci_opc_set_event_mask = 0x0613, + ixgbe_aci_opc_get_link_topo = 0x06E0, + ixgbe_aci_opc_get_link_topo_pin = 0x06E1, + ixgbe_aci_opc_read_i2c = 0x06E2, + ixgbe_aci_opc_write_i2c = 0x06E3, + ixgbe_aci_opc_read_mdio = 0x06E4, + ixgbe_aci_opc_write_mdio = 0x06E5, + ixgbe_aci_opc_set_gpio_by_func = 0x06E6, + ixgbe_aci_opc_get_gpio_by_func = 0x06E7, + ixgbe_aci_opc_set_gpio = 0x06EC, + ixgbe_aci_opc_get_gpio = 0x06ED, + ixgbe_aci_opc_sff_eeprom = 0x06EE, + ixgbe_aci_opc_prog_topo_dev_nvm = 0x06F2, + ixgbe_aci_opc_read_topo_dev_nvm = 0x06F3, + + /* NVM commands */ + ixgbe_aci_opc_nvm_read = 0x0701, + ixgbe_aci_opc_nvm_erase = 0x0702, + ixgbe_aci_opc_nvm_write = 0x0703, + ixgbe_aci_opc_nvm_cfg_read = 0x0704, + ixgbe_aci_opc_nvm_cfg_write = 0x0705, + ixgbe_aci_opc_nvm_checksum = 0x0706, + ixgbe_aci_opc_nvm_write_activate = 0x0707, + ixgbe_aci_opc_nvm_sr_dump = 0x0707, + ixgbe_aci_opc_nvm_save_factory_settings = 0x0708, + ixgbe_aci_opc_nvm_update_empr = 0x0709, + ixgbe_aci_opc_nvm_pkg_data = 0x070A, + ixgbe_aci_opc_nvm_pass_component_tbl = 0x070B, + + /* Alternate Structure Commands */ + ixgbe_aci_opc_write_alt_direct = 0x0900, + ixgbe_aci_opc_write_alt_indirect = 0x0901, + ixgbe_aci_opc_read_alt_direct = 0x0902, + ixgbe_aci_opc_read_alt_indirect = 0x0903, + ixgbe_aci_opc_done_alt_write = 0x0904, + ixgbe_aci_opc_clear_port_alt_write = 0x0906, + + /* debug commands */ + ixgbe_aci_opc_debug_dump_internals = 0xFF08, + + /* SystemDiagnostic commands */ + ixgbe_aci_opc_set_health_status_config = 0xFF20, + ixgbe_aci_opc_get_supported_health_status_codes = 0xFF21, + ixgbe_aci_opc_get_health_status = 0xFF22, + ixgbe_aci_opc_clear_health_status = 0xFF23, +}; + +/* Get version (direct 0x0001) */ +struct ixgbe_aci_cmd_get_ver { + u32 rom_ver; + u32 fw_build; + u8 fw_branch; + u8 fw_major; + u8 fw_minor; + u8 fw_patch; + u8 api_branch; + u8 api_major; + u8 api_minor; + u8 api_patch; +}; + +#define IXGBE_DRV_VER_STR_LEN_E610 32 + +/* Send driver version (indirect 0x0002) */ +struct ixgbe_aci_cmd_driver_ver { + u8 major_ver; + u8 minor_ver; + u8 build_ver; + u8 subbuild_ver; + u8 reserved[4]; + u32 addr_high; + u32 addr_low; +}; + +/* Get Expanded Error Code (0x0005, direct) */ +struct ixgbe_aci_cmd_get_exp_err { + u32 reason; +#define IXGBE_ACI_EXPANDED_ERROR_NOT_PROVIDED 0xFFFFFFFF + u32 identifier; + u8 rsvd[8]; +}; + +/* FW update timeout definitions are in milliseconds */ +#define IXGBE_NVM_TIMEOUT 180000 + +enum ixgbe_aci_res_access_type { + IXGBE_RES_READ = 1, + IXGBE_RES_WRITE +}; + +enum ixgbe_aci_res_ids { + IXGBE_NVM_RES_ID = 1, + IXGBE_SPD_RES_ID, + IXGBE_CHANGE_LOCK_RES_ID, + IXGBE_GLOBAL_CFG_LOCK_RES_ID +}; + +/* Request resource ownership (direct 0x0008) + * Release resource ownership (direct 0x0009) + */ +struct ixgbe_aci_cmd_req_res { + u16 res_id; + u16 access_type; + + /* Upon successful completion, FW writes this value and driver is + * expected to release resource before timeout. This value is provided + * in milliseconds. + */ + u32 timeout; +#define IXGBE_ACI_RES_NVM_READ_DFLT_TIMEOUT_MS 3000 +#define IXGBE_ACI_RES_NVM_WRITE_DFLT_TIMEOUT_MS 180000 +#define IXGBE_ACI_RES_CHNG_LOCK_DFLT_TIMEOUT_MS 1000 +#define IXGBE_ACI_RES_GLBL_LOCK_DFLT_TIMEOUT_MS 3000 + /* For SDP: pin ID of the SDP */ + u32 res_number; + u16 status; +#define IXGBE_ACI_RES_GLBL_SUCCESS 0 +#define IXGBE_ACI_RES_GLBL_IN_PROG 1 +#define IXGBE_ACI_RES_GLBL_DONE 2 + u8 reserved[2]; +}; + +/* Get function capabilities (indirect 0x000A) + * Get device capabilities (indirect 0x000B) + */ +struct ixgbe_aci_cmd_list_caps { + u8 cmd_flags; + u8 pf_index; + u8 reserved[2]; + u32 count; + u32 addr_high; + u32 addr_low; +}; + +/* Device/Function buffer entry, repeated per reported capability */ +struct ixgbe_aci_cmd_list_caps_elem { + u16 cap; +#define IXGBE_ACI_CAPS_VALID_FUNCTIONS 0x0005 +#define IXGBE_ACI_MAX_VALID_FUNCTIONS 0x8 +#define IXGBE_ACI_CAPS_SRIOV 0x0012 +#define IXGBE_ACI_CAPS_VF 0x0013 +#define IXGBE_ACI_CAPS_VMDQ 0x0014 +#define IXGBE_ACI_CAPS_VSI 0x0017 +#define IXGBE_ACI_CAPS_DCB 0x0018 +#define IXGBE_ACI_CAPS_RSS 0x0040 +#define IXGBE_ACI_CAPS_RXQS 0x0041 +#define IXGBE_ACI_CAPS_TXQS 0x0042 +#define IXGBE_ACI_CAPS_MSIX 0x0043 +#define IXGBE_ACI_CAPS_FD 0x0045 +#define IXGBE_ACI_CAPS_1588 0x0046 +#define IXGBE_ACI_CAPS_MAX_MTU 0x0047 +#define IXGBE_ACI_CAPS_NVM_VER 0x0048 +#define IXGBE_ACI_CAPS_PENDING_NVM_VER 0x0049 +#define IXGBE_ACI_CAPS_OROM_VER 0x004A +#define IXGBE_ACI_CAPS_PENDING_OROM_VER 0x004B +#define IXGBE_ACI_CAPS_PENDING_NET_VER 0x004D +#define IXGBE_ACI_CAPS_INLINE_IPSEC 0x0070 +#define IXGBE_ACI_CAPS_NUM_ENABLED_PORTS 0x0072 +#define IXGBE_ACI_CAPS_PCIE_RESET_AVOIDANCE 0x0076 +#define IXGBE_ACI_CAPS_POST_UPDATE_RESET_RESTRICT 0x0077 +#define IXGBE_ACI_CAPS_NVM_MGMT 0x0080 +#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG0 0x0081 +#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG1 0x0082 +#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG2 0x0083 +#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG3 0x0084 + u8 major_ver; + u8 minor_ver; + /* Number of resources described by this capability */ + u32 number; + /* Only meaningful for some types of resources */ + u32 logical_id; + /* Only meaningful for some types of resources */ + u32 phys_id; + u64 rsvd1; + u64 rsvd2; +}; + +/* Disable RXEN (direct 0x000C) */ +struct ixgbe_aci_cmd_disable_rxen { + u8 lport_num; + u8 reserved[15]; +}; + +/* Get PHY capabilities (indirect 0x0600) */ +struct ixgbe_aci_cmd_get_phy_caps { + u8 lport_num; + u8 reserved; + u16 param0; + /* 18.0 - Report qualified modules */ +#define IXGBE_ACI_GET_PHY_RQM BIT(0) + /* 18.1 - 18.3 : Report mode + * 000b - Report topology capabilities, without media + * 001b - Report topology capabilities, with media + * 010b - Report Active configuration + * 011b - Report PHY Type and FEC mode capabilities + * 100b - Report Default capabilities + */ +#define IXGBE_ACI_REPORT_MODE_M GENMASK(3, 1) +#define IXGBE_ACI_REPORT_TOPO_CAP_NO_MEDIA 0 +#define IXGBE_ACI_REPORT_TOPO_CAP_MEDIA BIT(1) +#define IXGBE_ACI_REPORT_ACTIVE_CFG BIT(2) +#define IXGBE_ACI_REPORT_DFLT_CFG BIT(3) + u32 reserved1; + u32 addr_high; + u32 addr_low; +}; + +/* This is #define of PHY type (Extended): + * The first set of defines is for phy_type_low. + */ +#define IXGBE_PHY_TYPE_LOW_100BASE_TX BIT_ULL(0) +#define IXGBE_PHY_TYPE_LOW_100M_SGMII BIT_ULL(1) +#define IXGBE_PHY_TYPE_LOW_1000BASE_T BIT_ULL(2) +#define IXGBE_PHY_TYPE_LOW_1000BASE_SX BIT_ULL(3) +#define IXGBE_PHY_TYPE_LOW_1000BASE_LX BIT_ULL(4) +#define IXGBE_PHY_TYPE_LOW_1000BASE_KX BIT_ULL(5) +#define IXGBE_PHY_TYPE_LOW_1G_SGMII BIT_ULL(6) +#define IXGBE_PHY_TYPE_LOW_2500BASE_T BIT_ULL(7) +#define IXGBE_PHY_TYPE_LOW_2500BASE_X BIT_ULL(8) +#define IXGBE_PHY_TYPE_LOW_2500BASE_KX BIT_ULL(9) +#define IXGBE_PHY_TYPE_LOW_5GBASE_T BIT_ULL(10) +#define IXGBE_PHY_TYPE_LOW_5GBASE_KR BIT_ULL(11) +#define IXGBE_PHY_TYPE_LOW_10GBASE_T BIT_ULL(12) +#define IXGBE_PHY_TYPE_LOW_10G_SFI_DA BIT_ULL(13) +#define IXGBE_PHY_TYPE_LOW_10GBASE_SR BIT_ULL(14) +#define IXGBE_PHY_TYPE_LOW_10GBASE_LR BIT_ULL(15) +#define IXGBE_PHY_TYPE_LOW_10GBASE_KR_CR1 BIT_ULL(16) +#define IXGBE_PHY_TYPE_LOW_10G_SFI_AOC_ACC BIT_ULL(17) +#define IXGBE_PHY_TYPE_LOW_10G_SFI_C2C BIT_ULL(18) +#define IXGBE_PHY_TYPE_LOW_25GBASE_T BIT_ULL(19) +#define IXGBE_PHY_TYPE_LOW_25GBASE_CR BIT_ULL(20) +#define IXGBE_PHY_TYPE_LOW_25GBASE_CR_S BIT_ULL(21) +#define IXGBE_PHY_TYPE_LOW_25GBASE_CR1 BIT_ULL(22) +#define IXGBE_PHY_TYPE_LOW_25GBASE_SR BIT_ULL(23) +#define IXGBE_PHY_TYPE_LOW_25GBASE_LR BIT_ULL(24) +#define IXGBE_PHY_TYPE_LOW_25GBASE_KR BIT_ULL(25) +#define IXGBE_PHY_TYPE_LOW_25GBASE_KR_S BIT_ULL(26) +#define IXGBE_PHY_TYPE_LOW_25GBASE_KR1 BIT_ULL(27) +#define IXGBE_PHY_TYPE_LOW_25G_AUI_AOC_ACC BIT_ULL(28) +#define IXGBE_PHY_TYPE_LOW_25G_AUI_C2C BIT_ULL(29) +#define IXGBE_PHY_TYPE_LOW_MAX_INDEX 29 +/* The second set of defines is for phy_type_high. */ +#define IXGBE_PHY_TYPE_HIGH_10BASE_T BIT_ULL(1) +#define IXGBE_PHY_TYPE_HIGH_10M_SGMII BIT_ULL(2) +#define IXGBE_PHY_TYPE_HIGH_2500M_SGMII BIT_ULL(56) +#define IXGBE_PHY_TYPE_HIGH_100M_USXGMII BIT_ULL(57) +#define IXGBE_PHY_TYPE_HIGH_1G_USXGMII BIT_ULL(58) +#define IXGBE_PHY_TYPE_HIGH_2500M_USXGMII BIT_ULL(59) +#define IXGBE_PHY_TYPE_HIGH_5G_USXGMII BIT_ULL(60) +#define IXGBE_PHY_TYPE_HIGH_10G_USXGMII BIT_ULL(61) +#define IXGBE_PHY_TYPE_HIGH_MAX_INDEX 61 + +struct ixgbe_aci_cmd_get_phy_caps_data { + u64 phy_type_low; /* Use values from IXGBE_PHY_TYPE_LOW_* */ + u64 phy_type_high; /* Use values from IXGBE_PHY_TYPE_HIGH_* */ + u8 caps; +#define IXGBE_ACI_PHY_EN_TX_LINK_PAUSE BIT(0) +#define IXGBE_ACI_PHY_EN_RX_LINK_PAUSE BIT(1) +#define IXGBE_ACI_PHY_LOW_POWER_MODE BIT(2) +#define IXGBE_ACI_PHY_EN_LINK BIT(3) +#define IXGBE_ACI_PHY_AN_MODE BIT(4) +#define IXGBE_ACI_PHY_EN_MOD_QUAL BIT(5) +#define IXGBE_ACI_PHY_EN_LESM BIT(6) +#define IXGBE_ACI_PHY_EN_AUTO_FEC BIT(7) +#define IXGBE_ACI_PHY_CAPS_MASK GENMASK(7, 0) + u8 low_power_ctrl_an; +#define IXGBE_ACI_PHY_EN_D3COLD_LOW_POWER_AUTONEG BIT(0) +#define IXGBE_ACI_PHY_AN_EN_CLAUSE28 BIT(1) +#define IXGBE_ACI_PHY_AN_EN_CLAUSE73 BIT(2) +#define IXGBE_ACI_PHY_AN_EN_CLAUSE37 BIT(3) + u16 eee_cap; +#define IXGBE_ACI_PHY_EEE_EN_100BASE_TX BIT(0) +#define IXGBE_ACI_PHY_EEE_EN_1000BASE_T BIT(1) +#define IXGBE_ACI_PHY_EEE_EN_10GBASE_T BIT(2) +#define IXGBE_ACI_PHY_EEE_EN_1000BASE_KX BIT(3) +#define IXGBE_ACI_PHY_EEE_EN_10GBASE_KR BIT(4) +#define IXGBE_ACI_PHY_EEE_EN_25GBASE_KR BIT(5) +#define IXGBE_ACI_PHY_EEE_EN_10BASE_T BIT(11) + u16 eeer_value; + u8 phy_id_oui[4]; /* PHY/Module ID connected on the port */ + u8 phy_fw_ver[8]; + u8 link_fec_options; +#define IXGBE_ACI_PHY_FEC_10G_KR_40G_KR4_EN BIT(0) +#define IXGBE_ACI_PHY_FEC_10G_KR_40G_KR4_REQ BIT(1) +#define IXGBE_ACI_PHY_FEC_25G_RS_528_REQ BIT(2) +#define IXGBE_ACI_PHY_FEC_25G_KR_REQ BIT(3) +#define IXGBE_ACI_PHY_FEC_25G_RS_544_REQ BIT(4) +#define IXGBE_ACI_PHY_FEC_25G_RS_CLAUSE91_EN BIT(6) +#define IXGBE_ACI_PHY_FEC_25G_KR_CLAUSE74_EN BIT(7) +#define IXGBE_ACI_PHY_FEC_MASK 0xdf + u8 module_compliance_enforcement; +#define IXGBE_ACI_MOD_ENFORCE_STRICT_MODE BIT(0) + u8 extended_compliance_code; +#define IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE 3 + u8 module_type[IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE]; +#define IXGBE_ACI_MOD_TYPE_BYTE0_SFP_PLUS 0xA0 +#define IXGBE_ACI_MOD_TYPE_BYTE0_QSFP_PLUS 0x80 +#define IXGBE_ACI_MOD_TYPE_IDENT 1 +#define IXGBE_ACI_MOD_TYPE_BYTE1_SFP_PLUS_CU_PASSIVE BIT(0) +#define IXGBE_ACI_MOD_TYPE_BYTE1_SFP_PLUS_CU_ACTIVE BIT(1) +#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_SR BIT(4) +#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_LR BIT(5) +#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_LRM BIT(6) +#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_ER BIT(7) +#define IXGBE_ACI_MOD_TYPE_BYTE2_SFP_PLUS 0xA0 +#define IXGBE_ACI_MOD_TYPE_BYTE2_QSFP_PLUS 0x86 + u8 qualified_module_count; + u8 rsvd2[7]; /* Bytes 47:41 reserved */ +#define IXGBE_ACI_QUAL_MOD_COUNT_MAX 16 + struct { + u8 v_oui[3]; + u8 rsvd3; + u8 v_part[16]; + u32 v_rev; + u64 rsvd4; + } qual_modules[IXGBE_ACI_QUAL_MOD_COUNT_MAX]; +}; + +/* Set PHY capabilities (direct 0x0601) + * NOTE: This command must be followed by setup link and restart auto-neg + */ +struct ixgbe_aci_cmd_set_phy_cfg { + u8 lport_num; + u8 reserved[7]; + u32 addr_high; + u32 addr_low; +}; + +/* Set PHY config command data structure */ +struct ixgbe_aci_cmd_set_phy_cfg_data { + u64 phy_type_low; /* Use values from IXGBE_PHY_TYPE_LOW_* */ + u64 phy_type_high; /* Use values from IXGBE_PHY_TYPE_HIGH_* */ + u8 caps; +#define IXGBE_ACI_PHY_ENA_VALID_MASK 0xef +#define IXGBE_ACI_PHY_ENA_TX_PAUSE_ABILITY BIT(0) +#define IXGBE_ACI_PHY_ENA_RX_PAUSE_ABILITY BIT(1) +#define IXGBE_ACI_PHY_ENA_LOW_POWER BIT(2) +#define IXGBE_ACI_PHY_ENA_LINK BIT(3) +#define IXGBE_ACI_PHY_ENA_AUTO_LINK_UPDT BIT(5) +#define IXGBE_ACI_PHY_ENA_LESM BIT(6) +#define IXGBE_ACI_PHY_ENA_AUTO_FEC BIT(7) + u8 low_power_ctrl_an; + u16 eee_cap; /* Value from ixgbe_aci_get_phy_caps */ + u16 eeer_value; /* Use defines from ixgbe_aci_get_phy_caps */ + u8 link_fec_opt; /* Use defines from ixgbe_aci_get_phy_caps */ + u8 module_compliance_enforcement; +}; + +/* Restart AN command data structure (direct 0x0605) + * Also used for response, with only the lport_num field present. + */ +struct ixgbe_aci_cmd_restart_an { + u8 lport_num; + u8 reserved; + u8 cmd_flags; +#define IXGBE_ACI_RESTART_AN_LINK_RESTART BIT(1) +#define IXGBE_ACI_RESTART_AN_LINK_ENABLE BIT(2) + u8 reserved2[13]; +}; + +/* Get link status (indirect 0x0607), also used for Link Status Event */ +struct ixgbe_aci_cmd_get_link_status { + u8 lport_num; + u8 reserved; + u16 cmd_flags; +#define IXGBE_ACI_LSE_M GENMASK(1, 0) +#define IXGBE_ACI_LSE_NOP 0x0 +#define IXGBE_ACI_LSE_DIS 0x2 +#define IXGBE_ACI_LSE_ENA 0x3 + /* only response uses this flag */ +#define IXGBE_ACI_LSE_IS_ENABLED 0x1 + u32 reserved2; + u32 addr_high; + u32 addr_low; +}; + +/* Get link status response data structure, also used for Link Status Event */ +struct ixgbe_aci_cmd_get_link_status_data { + u8 topo_media_conflict; +#define IXGBE_ACI_LINK_TOPO_CONFLICT BIT(0) +#define IXGBE_ACI_LINK_MEDIA_CONFLICT BIT(1) +#define IXGBE_ACI_LINK_TOPO_CORRUPT BIT(2) +#define IXGBE_ACI_LINK_TOPO_UNREACH_PRT BIT(4) +#define IXGBE_ACI_LINK_TOPO_UNDRUTIL_PRT BIT(5) +#define IXGBE_ACI_LINK_TOPO_UNDRUTIL_MEDIA BIT(6) +#define IXGBE_ACI_LINK_TOPO_UNSUPP_MEDIA BIT(7) + u8 link_cfg_err; +#define IXGBE_ACI_LINK_CFG_ERR BIT(0) +#define IXGBE_ACI_LINK_CFG_COMPLETED BIT(1) +#define IXGBE_ACI_LINK_ACT_PORT_OPT_INVAL BIT(2) +#define IXGBE_ACI_LINK_FEAT_ID_OR_CONFIG_ID_INVAL BIT(3) +#define IXGBE_ACI_LINK_TOPO_CRITICAL_SDP_ERR BIT(4) +#define IXGBE_ACI_LINK_MODULE_POWER_UNSUPPORTED BIT(5) +#define IXGBE_ACI_LINK_EXTERNAL_PHY_LOAD_FAILURE BIT(6) +#define IXGBE_ACI_LINK_INVAL_MAX_POWER_LIMIT BIT(7) + u8 link_info; +#define IXGBE_ACI_LINK_UP BIT(0) /* Link Status */ +#define IXGBE_ACI_LINK_FAULT BIT(1) +#define IXGBE_ACI_LINK_FAULT_TX BIT(2) +#define IXGBE_ACI_LINK_FAULT_RX BIT(3) +#define IXGBE_ACI_LINK_FAULT_REMOTE BIT(4) +#define IXGBE_ACI_LINK_UP_PORT BIT(5) /* External Port Link Status */ +#define IXGBE_ACI_MEDIA_AVAILABLE BIT(6) +#define IXGBE_ACI_SIGNAL_DETECT BIT(7) + u8 an_info; +#define IXGBE_ACI_AN_COMPLETED BIT(0) +#define IXGBE_ACI_LP_AN_ABILITY BIT(1) +#define IXGBE_ACI_PD_FAULT BIT(2) /* Parallel Detection Fault */ +#define IXGBE_ACI_FEC_EN BIT(3) +#define IXGBE_ACI_PHY_LOW_POWER BIT(4) /* Low Power State */ +#define IXGBE_ACI_LINK_PAUSE_TX BIT(5) +#define IXGBE_ACI_LINK_PAUSE_RX BIT(6) +#define IXGBE_ACI_QUALIFIED_MODULE BIT(7) + u8 ext_info; +#define IXGBE_ACI_LINK_PHY_TEMP_ALARM BIT(0) +#define IXGBE_ACI_LINK_EXCESSIVE_ERRORS BIT(1) /* Excessive Link Errors */ + /* Port Tx Suspended */ +#define IXGBE_ACI_LINK_TX_ACTIVE 0 +#define IXGBE_ACI_LINK_TX_DRAINED 1 +#define IXGBE_ACI_LINK_TX_FLUSHED 3 + u8 lb_status; +#define IXGBE_ACI_LINK_LB_PHY_LCL BIT(0) +#define IXGBE_ACI_LINK_LB_PHY_RMT BIT(1) +#define IXGBE_ACI_LINK_LB_MAC_LCL BIT(2) + u16 max_frame_size; + u8 cfg; +#define IXGBE_ACI_LINK_25G_KR_FEC_EN BIT(0) +#define IXGBE_ACI_LINK_25G_RS_528_FEC_EN BIT(1) +#define IXGBE_ACI_LINK_25G_RS_544_FEC_EN BIT(2) +#define IXGBE_ACI_FEC_MASK GENMASK(2, 0) + /* Pacing Config */ +#define IXGBE_ACI_CFG_PACING_M GENMASK(6, 3) +#define IXGBE_ACI_CFG_PACING_TYPE_M BIT(7) +#define IXGBE_ACI_CFG_PACING_TYPE_AVG 0 +#define IXGBE_ACI_CFG_PACING_TYPE_FIXED IXGBE_ACI_CFG_PACING_TYPE_M + /* External Device Power Ability */ + u8 power_desc; +#define IXGBE_ACI_PWR_CLASS_M GENMASK(5, 0) +#define IXGBE_ACI_LINK_PWR_BASET_LOW_HIGH 0 +#define IXGBE_ACI_LINK_PWR_BASET_HIGH 1 +#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_1 0 +#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_2 1 +#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_3 2 +#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_4 3 + u16 link_speed; +#define IXGBE_ACI_LINK_SPEED_M GENMASK(10, 0) +#define IXGBE_ACI_LINK_SPEED_10MB BIT(0) +#define IXGBE_ACI_LINK_SPEED_100MB BIT(1) +#define IXGBE_ACI_LINK_SPEED_1000MB BIT(2) +#define IXGBE_ACI_LINK_SPEED_2500MB BIT(3) +#define IXGBE_ACI_LINK_SPEED_5GB BIT(4) +#define IXGBE_ACI_LINK_SPEED_10GB BIT(5) +#define IXGBE_ACI_LINK_SPEED_20GB BIT(6) +#define IXGBE_ACI_LINK_SPEED_25GB BIT(7) +#define IXGBE_ACI_LINK_SPEED_40GB BIT(8) +#define IXGBE_ACI_LINK_SPEED_50GB BIT(9) +#define IXGBE_ACI_LINK_SPEED_100GB BIT(10) +#define IXGBE_ACI_LINK_SPEED_200GB BIT(11) +#define IXGBE_ACI_LINK_SPEED_UNKNOWN BIT(15) + u16 reserved3; + u8 ext_fec_status; +#define IXGBE_ACI_LINK_RS_272_FEC_EN BIT(0) /* RS 272 FEC enabled */ + u8 reserved4; + u64 phy_type_low; /* Use values from ICE_PHY_TYPE_LOW_* */ + u64 phy_type_high; /* Use values from ICE_PHY_TYPE_HIGH_* */ + /* Get link status version 2 link partner data */ + u64 lp_phy_type_low; /* Use values from ICE_PHY_TYPE_LOW_* */ + u64 lp_phy_type_high; /* Use values from ICE_PHY_TYPE_HIGH_* */ + u8 lp_fec_adv; +#define IXGBE_ACI_LINK_LP_10G_KR_FEC_CAP BIT(0) +#define IXGBE_ACI_LINK_LP_25G_KR_FEC_CAP BIT(1) +#define IXGBE_ACI_LINK_LP_RS_528_FEC_CAP BIT(2) +#define IXGBE_ACI_LINK_LP_50G_KR_272_FEC_CAP BIT(3) +#define IXGBE_ACI_LINK_LP_100G_KR_272_FEC_CAP BIT(4) +#define IXGBE_ACI_LINK_LP_200G_KR_272_FEC_CAP BIT(5) + u8 lp_fec_req; +#define IXGBE_ACI_LINK_LP_10G_KR_FEC_REQ BIT(0) +#define IXGBE_ACI_LINK_LP_25G_KR_FEC_REQ BIT(1) +#define IXGBE_ACI_LINK_LP_RS_528_FEC_REQ BIT(2) +#define IXGBE_ACI_LINK_LP_KR_272_FEC_REQ BIT(3) + u8 lp_flowcontrol; +#define IXGBE_ACI_LINK_LP_PAUSE_ADV BIT(0) +#define IXGBE_ACI_LINK_LP_ASM_DIR_ADV BIT(1) + u8 reserved5[5]; +} __packed; + +/* Set event mask command (direct 0x0613) */ +struct ixgbe_aci_cmd_set_event_mask { + u8 lport_num; + u8 reserved[7]; + u16 event_mask; +#define IXGBE_ACI_LINK_EVENT_UPDOWN BIT(1) +#define IXGBE_ACI_LINK_EVENT_MEDIA_NA BIT(2) +#define IXGBE_ACI_LINK_EVENT_LINK_FAULT BIT(3) +#define IXGBE_ACI_LINK_EVENT_PHY_TEMP_ALARM BIT(4) +#define IXGBE_ACI_LINK_EVENT_EXCESSIVE_ERRORS BIT(5) +#define IXGBE_ACI_LINK_EVENT_SIGNAL_DETECT BIT(6) +#define IXGBE_ACI_LINK_EVENT_AN_COMPLETED BIT(7) +#define IXGBE_ACI_LINK_EVENT_MODULE_QUAL_FAIL BIT(8) +#define IXGBE_ACI_LINK_EVENT_PORT_TX_SUSPENDED BIT(9) +#define IXGBE_ACI_LINK_EVENT_TOPO_CONFLICT BIT(10) +#define IXGBE_ACI_LINK_EVENT_MEDIA_CONFLICT BIT(11) +#define IXGBE_ACI_LINK_EVENT_PHY_FW_LOAD_FAIL BIT(12) + u8 reserved1[6]; +}; + +struct ixgbe_aci_cmd_link_topo_params { + u8 lport_num; + u8 lport_num_valid; +#define IXGBE_ACI_LINK_TOPO_PORT_NUM_VALID BIT(0) + u8 node_type_ctx; +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_M GENMASK(3, 0) +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_PHY 0 +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_GPIO_CTRL 1 +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_MUX_CTRL 2 +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_LED_CTRL 3 +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_LED 4 +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_THERMAL 5 +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_CAGE 6 +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_MEZZ 7 +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_ID_EEPROM 8 +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_CLK_CTRL 9 +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_CLK_MUX 10 +#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_GPS 11 +#define IXGBE_ACI_LINK_TOPO_NODE_CTX_S 4 +#define IXGBE_ACI_LINK_TOPO_NODE_CTX_GLOBAL 0 +#define IXGBE_ACI_LINK_TOPO_NODE_CTX_BOARD 1 +#define IXGBE_ACI_LINK_TOPO_NODE_CTX_PORT 2 +#define IXGBE_ACI_LINK_TOPO_NODE_CTX_NODE 3 +#define IXGBE_ACI_LINK_TOPO_NODE_CTX_NODE_HANDLE 4 +#define IXGBE_ACI_LINK_TOPO_NODE_CTX_DIRECT_BUS_ACCESS 5 +#define IXGBE_ACI_LINK_TOPO_NODE_CTX_NODE_HANDLE_BUS_ADDRESS 6 + u8 index; +}; + +struct ixgbe_aci_cmd_link_topo_addr { + struct ixgbe_aci_cmd_link_topo_params topo_params; + u16 handle; +/* Used to decode the handle field */ +#define IXGBE_ACI_LINK_TOPO_HANDLE_BRD_TYPE_M BIT(9) +#define IXGBE_ACI_LINK_TOPO_HANDLE_BRD_TYPE_LOM BIT(9) +#define IXGBE_ACI_LINK_TOPO_HANDLE_BRD_TYPE_MEZZ 0 +}; + +/* Get Link Topology Handle (direct, 0x06E0) */ +struct ixgbe_aci_cmd_get_link_topo { + struct ixgbe_aci_cmd_link_topo_addr addr; + u8 node_part_num; +#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_PCA9575 0x21 +#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_ZL30632_80032 0x24 +#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_SI5384 0x25 +#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_C827 0x31 +#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_GEN_CLK_MUX 0x47 +#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_GEN_GPS 0x48 +#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_E610_PTC 0x49 + u8 rsvd[9]; +}; + +/* Get Link Topology Pin (direct, 0x06E1) */ +struct ixgbe_aci_cmd_get_link_topo_pin { + struct ixgbe_aci_cmd_link_topo_addr addr; + u8 input_io_params; +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_GPIO 0 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_RESET_N 1 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_INT_N 2 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_PRESENT_N 3 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_TX_DIS 4 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_MODSEL_N 5 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_LPMODE 6 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_TX_FAULT 7 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_RX_LOSS 8 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_RS0 9 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_RS1 10 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_EEPROM_WP 11 +/* 12 repeats intentionally due to two different uses depending on context */ +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_LED 12 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_RED_LED 12 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_GREEN_LED 13 +#define IXGBE_ACI_LINK_TOPO_IO_FUNC_BLUE_LED 14 +#define IXGBE_ACI_LINK_TOPO_INPUT_IO_TYPE_GPIO 3 +/* Use IXGBE_ACI_LINK_TOPO_NODE_TYPE_* for the type values */ + u8 output_io_params; +/* Use IXGBE_ACI_LINK_TOPO_NODE_TYPE_* for the type values */ + u8 output_io_flags; +#define IXGBE_ACI_LINK_TOPO_OUTPUT_POLARITY BIT(5) +#define IXGBE_ACI_LINK_TOPO_OUTPUT_VALUE BIT(6) +#define IXGBE_ACI_LINK_TOPO_OUTPUT_DRIVEN BIT(7) + u8 rsvd[7]; +}; + +/* Read/Write SFF EEPROM command (indirect 0x06EE) */ +struct ixgbe_aci_cmd_sff_eeprom { + u8 lport_num; + u8 lport_num_valid; +#define IXGBE_ACI_SFF_PORT_NUM_VALID BIT(0) + u16 i2c_bus_addr; +#define IXGBE_ACI_SFF_I2CBUS_7BIT_M GENMASK(6, 0) +#define IXGBE_ACI_SFF_I2CBUS_10BIT_M GENMASK(9, 0) +#define IXGBE_ACI_SFF_I2CBUS_TYPE_M BIT(10) +#define IXGBE_ACI_SFF_I2CBUS_TYPE_7BIT 0 +#define IXGBE_ACI_SFF_I2CBUS_TYPE_10BIT IXGBE_ACI_SFF_I2CBUS_TYPE_M +#define IXGBE_ACI_SFF_NO_PAGE_BANK_UPDATE 0 +#define IXGBE_ACI_SFF_UPDATE_PAGE 1 +#define IXGBE_ACI_SFF_UPDATE_BANK 2 +#define IXGBE_ACI_SFF_UPDATE_PAGE_BANK 3 +#define IXGBE_ACI_SFF_IS_WRITE BIT(15) + u16 i2c_offset; + u8 module_bank; + u8 module_page; + u32 addr_high; + u32 addr_low; +}; + +/* NVM Read command (indirect 0x0701) + * NVM Erase commands (direct 0x0702) + * NVM Write commands (indirect 0x0703) + * NVM Write Activate commands (direct 0x0707) + * NVM Shadow RAM Dump commands (direct 0x0707) + */ +struct ixgbe_aci_cmd_nvm { +#define IXGBE_ACI_NVM_MAX_OFFSET 0xFFFFFF + u16 offset_low; + u8 offset_high; /* For Write Activate offset_high is used as flags2 */ + u8 cmd_flags; +#define IXGBE_ACI_NVM_LAST_CMD BIT(0) +#define IXGBE_ACI_NVM_PCIR_REQ BIT(0) /* Used by NVM Write reply */ +#define IXGBE_ACI_NVM_PRESERVE_ALL BIT(1) +#define IXGBE_ACI_NVM_ACTIV_SEL_NVM BIT(3) /* Write Activate/SR Dump only */ +#define IXGBE_ACI_NVM_ACTIV_SEL_OROM BIT(4) +#define IXGBE_ACI_NVM_ACTIV_SEL_NETLIST BIT(5) +#define IXGBE_ACI_NVM_SPECIAL_UPDATE BIT(6) +#define IXGBE_ACI_NVM_REVERT_LAST_ACTIV BIT(6) /* Write Activate only */ +#define IXGBE_ACI_NVM_FLASH_ONLY BIT(7) +#define IXGBE_ACI_NVM_RESET_LVL_M GENMASK(1, 0) /* Write reply only */ +#define IXGBE_ACI_NVM_POR_FLAG 0 +#define IXGBE_ACI_NVM_PERST_FLAG 1 +#define IXGBE_ACI_NVM_EMPR_FLAG 2 +#define IXGBE_ACI_NVM_EMPR_ENA BIT(0) /* Write Activate reply only */ + /* For Write Activate, several flags are sent as part of a separate + * flags2 field using a separate byte. For simplicity of the software + * interface, we pass the flags as a 16 bit value so these flags are + * all offset by 8 bits + */ +#define IXGBE_ACI_NVM_ACTIV_REQ_EMPR BIT(8) /* NVM Write Activate only */ + u16 module_typeid; + u16 length; +#define IXGBE_ACI_NVM_ERASE_LEN 0xFFFF + u32 addr_high; + u32 addr_low; +}; + +/* NVM Module_Type ID, needed offset and read_len for + * struct ixgbe_aci_cmd_nvm. + */ +#define IXGBE_ACI_NVM_START_POINT 0 + +/* NVM Checksum Command (direct, 0x0706) */ +struct ixgbe_aci_cmd_nvm_checksum { + u8 flags; +#define IXGBE_ACI_NVM_CHECKSUM_VERIFY BIT(0) +#define IXGBE_ACI_NVM_CHECKSUM_RECALC BIT(1) + u8 rsvd; + u16 checksum; /* Used only by response */ +#define IXGBE_ACI_NVM_CHECKSUM_CORRECT 0xBABA + u8 rsvd2[12]; +}; + +/** + * struct ixgbe_aci_desc - Admin Command (AC) descriptor + * @flags: IXGBE_ACI_FLAG_* flags + * @opcode: Admin command opcode + * @datalen: length in bytes of indirect/external data buffer + * @retval: return value from firmware + * @cookie_high: opaque data high-half + * @cookie_low: opaque data low-half + * @params: command-specific parameters + * + * Descriptor format for commands the driver posts via the + * Admin Command Interface (ACI). + * The firmware writes back onto the command descriptor and returns + * the result of the command. Asynchronous events that are not an immediate + * result of the command are written to the Admin Command Interface (ACI) using + * the same descriptor format. Descriptors are in little-endian notation with + * 32-bit words. + */ +struct ixgbe_aci_desc { + u16 flags; + u16 opcode; + u16 datalen; + u16 retval; + u32 cookie_high; + u32 cookie_low; + union { + u8 raw[16]; + struct ixgbe_aci_cmd_get_ver get_ver; + struct ixgbe_aci_cmd_driver_ver driver_ver; + struct ixgbe_aci_cmd_get_exp_err exp_err; + struct ixgbe_aci_cmd_req_res res_owner; + struct ixgbe_aci_cmd_list_caps get_cap; + struct ixgbe_aci_cmd_disable_rxen disable_rxen; + struct ixgbe_aci_cmd_get_phy_caps get_phy; + struct ixgbe_aci_cmd_set_phy_cfg set_phy; + struct ixgbe_aci_cmd_restart_an restart_an; + struct ixgbe_aci_cmd_get_link_status get_link_status; + struct ixgbe_aci_cmd_set_event_mask set_event_mask; + struct ixgbe_aci_cmd_get_link_topo get_link_topo; + struct ixgbe_aci_cmd_get_link_topo_pin get_link_topo_pin; + struct ixgbe_aci_cmd_sff_eeprom read_write_sff_param; + struct ixgbe_aci_cmd_nvm nvm; + struct ixgbe_aci_cmd_nvm_checksum nvm_checksum; + } params; +}; + +/* E610-specific adapter context structures */ + +struct ixgbe_link_status { + /* Refer to ixgbe_aci_phy_type for bits definition */ + u64 phy_type_low; + u64 phy_type_high; + u16 max_frame_size; + u16 link_speed; + u16 req_speeds; + u8 topo_media_conflict; + u8 link_cfg_err; + u8 lse_ena; /* Link Status Event notification */ + u8 link_info; + u8 an_info; + u8 ext_info; + u8 fec_info; + u8 pacing; + /* Refer to #define from module_type[IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE] + * of ixgbe_aci_get_phy_caps structure + */ + u8 module_type[IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE]; +}; + +/* Common HW capabilities for SW use */ +struct ixgbe_hw_caps { + /* Write CSR protection */ + u64 wr_csr_prot; + u32 switching_mode; + /* switching mode supported - EVB switching (including cloud) */ +#define IXGBE_NVM_IMAGE_TYPE_EVB 0x0 + + /* Manageability mode & supported protocols over MCTP */ + u32 mgmt_mode; +#define IXGBE_MGMT_MODE_PASS_THRU_MODE_M GENMASK(3, 0) +#define IXGBE_MGMT_MODE_CTL_INTERFACE_M GENMASK(7, 4) +#define IXGBE_MGMT_MODE_REDIR_SB_INTERFACE_M GENMASK(11, 8) + + u32 mgmt_protocols_mctp; +#define IXGBE_MGMT_MODE_PROTO_RSVD BIT(0) +#define IXGBE_MGMT_MODE_PROTO_PLDM BIT(1) +#define IXGBE_MGMT_MODE_PROTO_OEM BIT(2) +#define IXGBE_MGMT_MODE_PROTO_NC_SI BIT(3) + + u32 os2bmc; + u32 valid_functions; + /* DCB capabilities */ + u32 active_tc_bitmap; + u32 maxtc; + + /* RSS related capabilities */ + u32 rss_table_size; /* 512 for PFs and 64 for VFs */ + u32 rss_table_entry_width; /* RSS Entry width in bits */ + + /* Tx/Rx queues */ + u32 num_rxq; /* Number/Total Rx queues */ + u32 rxq_first_id; /* First queue ID for Rx queues */ + u32 num_txq; /* Number/Total Tx queues */ + u32 txq_first_id; /* First queue ID for Tx queues */ + + /* MSI-X vectors */ + u32 num_msix_vectors; + u32 msix_vector_first_id; + + /* Max MTU for function or device */ + u32 max_mtu; + + /* WOL related */ + u32 num_wol_proxy_fltr; + u32 wol_proxy_vsi_seid; + + /* LED/SDP pin count */ + u32 led_pin_num; + u32 sdp_pin_num; + + /* LED/SDP - Supports up to 12 LED pins and 8 SDP signals */ +#define IXGBE_MAX_SUPPORTED_GPIO_LED 12 +#define IXGBE_MAX_SUPPORTED_GPIO_SDP 8 + u8 led[IXGBE_MAX_SUPPORTED_GPIO_LED]; + u8 sdp[IXGBE_MAX_SUPPORTED_GPIO_SDP]; + /* SR-IOV virtualization */ + u8 sr_iov_1_1; /* SR-IOV enabled */ + /* VMDQ */ + u8 vmdq; /* VMDQ supported */ + + /* EVB capabilities */ + u8 evb_802_1_qbg; /* Edge Virtual Bridging */ + u8 evb_802_1_qbh; /* Bridge Port Extension */ + + u8 dcb; + u8 iscsi; + u8 ieee_1588; + u8 mgmt_cem; + + /* WoL and APM support */ +#define IXGBE_WOL_SUPPORT_M BIT(0) +#define IXGBE_ACPI_PROG_MTHD_M BIT(1) +#define IXGBE_PROXY_SUPPORT_M BIT(2) + u8 apm_wol_support; + u8 acpi_prog_mthd; + u8 proxy_support; + bool nvm_update_pending_nvm; + bool nvm_update_pending_orom; + bool nvm_update_pending_netlist; +#define IXGBE_NVM_PENDING_NVM_IMAGE BIT(0) +#define IXGBE_NVM_PENDING_OROM BIT(1) +#define IXGBE_NVM_PENDING_NETLIST BIT(2) + bool sec_rev_disabled; + bool update_disabled; + bool nvm_unified_update; + bool netlist_auth; +#define IXGBE_NVM_MGMT_SEC_REV_DISABLED BIT(0) +#define IXGBE_NVM_MGMT_UPDATE_DISABLED BIT(1) +#define IXGBE_NVM_MGMT_UNIFIED_UPD_SUPPORT BIT(3) +#define IXGBE_NVM_MGMT_NETLIST_AUTH_SUPPORT BIT(5) + bool no_drop_policy_support; + /* PCIe reset avoidance */ + bool pcie_reset_avoidance; /* false: not supported, true: supported */ + /* Post update reset restriction */ + bool reset_restrict_support; /* false: not supported, true: supported */ + + /* External topology device images within the NVM */ +#define IXGBE_EXT_TOPO_DEV_IMG_COUNT 4 + u32 ext_topo_dev_img_ver_high[IXGBE_EXT_TOPO_DEV_IMG_COUNT]; + u32 ext_topo_dev_img_ver_low[IXGBE_EXT_TOPO_DEV_IMG_COUNT]; + u8 ext_topo_dev_img_part_num[IXGBE_EXT_TOPO_DEV_IMG_COUNT]; +#define IXGBE_EXT_TOPO_DEV_IMG_PART_NUM_S 8 +#define IXGBE_EXT_TOPO_DEV_IMG_PART_NUM_M GENMASK(15, 8) + bool ext_topo_dev_img_load_en[IXGBE_EXT_TOPO_DEV_IMG_COUNT]; +#define IXGBE_EXT_TOPO_DEV_IMG_LOAD_EN BIT(0) + bool ext_topo_dev_img_prog_en[IXGBE_EXT_TOPO_DEV_IMG_COUNT]; +#define IXGBE_EXT_TOPO_DEV_IMG_PROG_EN BIT(1) +} __packed; + +/* Function specific capabilities */ +struct ixgbe_hw_func_caps { + u32 num_allocd_vfs; /* Number of allocated VFs */ + u32 vf_base_id; /* Logical ID of the first VF */ + u32 guar_num_vsi; + struct ixgbe_hw_caps common_cap; + bool no_drop_policy_ena; +}; + +/* Device wide capabilities */ +struct ixgbe_hw_dev_caps { + struct ixgbe_hw_caps common_cap; + u32 num_vfs_exposed; /* Total number of VFs exposed */ + u32 num_vsi_allocd_to_host; /* Excluding EMP VSI */ + u32 num_flow_director_fltr; /* Number of FD filters available */ + u32 num_funcs; +}; + +/* ACI event information */ +struct ixgbe_aci_event { + struct ixgbe_aci_desc desc; + u8 *msg_buf; + u16 msg_len; + u16 buf_len; +}; + +struct ixgbe_aci_info { + struct mutex lock; /* admin command interface lock */ + enum ixgbe_aci_err last_status; /* last status of sent admin command */ +}; + +/* Option ROM version information */ +struct ixgbe_orom_info { + u8 major; /* Major version of OROM */ + u8 patch; /* Patch version of OROM */ + u16 build; /* Build version of OROM */ + u32 srev; /* Security revision */ +}; + +/* NVM version information */ +struct ixgbe_nvm_info { + u32 eetrack; + u32 srev; + u8 major; + u8 minor; +} __packed; + +/* netlist version information */ +struct ixgbe_netlist_info { + u32 major; /* major high/low */ + u32 minor; /* minor high/low */ + u32 type; /* type high/low */ + u32 rev; /* revision high/low */ + u32 hash; /* SHA-1 hash word */ + u16 cust_ver; /* customer version */ +} __packed; + +/* Enumeration of possible flash banks for the NVM, OROM, and Netlist modules + * of the flash image. + */ +enum ixgbe_flash_bank { + IXGBE_INVALID_FLASH_BANK, + IXGBE_1ST_FLASH_BANK, + IXGBE_2ND_FLASH_BANK, +}; + +/* information for accessing NVM, OROM, and Netlist flash banks */ +struct ixgbe_bank_info { + u32 nvm_ptr; /* Pointer to 1st NVM bank */ + u32 nvm_size; /* Size of NVM bank */ + u32 orom_ptr; /* Pointer to 1st OROM bank */ + u32 orom_size; /* Size of OROM bank */ + u32 netlist_ptr; /* Ptr to 1st Netlist bank */ + u32 netlist_size; /* Size of Netlist bank */ + enum ixgbe_flash_bank nvm_bank; /* Active NVM bank */ + enum ixgbe_flash_bank orom_bank; /* Active OROM bank */ + enum ixgbe_flash_bank netlist_bank; /* Active Netlist bank */ +}; + +/* Flash Chip Information */ +struct ixgbe_flash_info { + struct ixgbe_orom_info orom; /* Option ROM version info */ + u32 flash_size; /* Available flash size in bytes */ + struct ixgbe_nvm_info nvm; /* NVM version information */ + struct ixgbe_netlist_info netlist; /* Netlist version info */ + struct ixgbe_bank_info banks; /* Flash Bank information */ + u16 sr_words; /* Shadow RAM size in words */ + u8 blank_nvm_mode; /* is NVM empty (no FW present) */ +}; + +#endif /* _IXGBE_TYPE_E610_H_ */