@@ -5,7 +5,7 @@
obj-$(CONFIG_LAN969X_SWITCH) += lan969x-switch.o
-lan969x-switch-y := lan969x_regs.o lan969x.o
+lan969x-switch-y := lan969x_regs.o lan969x.o lan969x_calendar.o
# Provide include files
ccflags-y += -I$(srctree)/drivers/net/ethernet/microchip/fdma
@@ -332,6 +332,7 @@ static const struct sparx5_ops lan969x_ops = {
.get_sdlb_group = &lan969x_get_sdlb_group,
.set_port_mux = &lan969x_port_mux_set,
.ptp_irq_handler = &lan969x_ptp_irq_handler,
+ .dsm_calendar_calc = &lan969x_dsm_calendar_calc,
};
const struct sparx5_match_data lan969x_desc = {
@@ -51,4 +51,7 @@ static inline bool lan969x_port_is_25g(int portno)
return false;
}
+/* lan969x_calendar.c */
+int lan969x_dsm_calendar_calc(struct sparx5 *sparx5, u32 taxi,
+ struct sparx5_calendar_data *data);
#endif
new file mode 100644
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Microchip lan969x Switch driver
+ *
+ * Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include "lan969x.h"
+
+#define LAN969X_DSM_CAL_DEVS_PER_TAXI 10
+#define LAN969X_DSM_CAL_TAXIS 5
+
+enum lan969x_dsm_cal_dev {
+ DSM_CAL_DEV_2G5,
+ DSM_CAL_DEV_5G,
+ DSM_CAL_DEV_10G,
+ DSM_CAL_DEV_OTHER, /* 1G or less */
+ DSM_CAL_DEV_MAX
+};
+
+/* Each entry in the following struct defines properties for a given speed
+ * (10G, 5G, 2.5G, or 1G or less).
+ */
+struct lan969x_dsm_cal_dev_speed {
+ /* Number of devices that requires this speed. */
+ u32 n_devs;
+
+ /* Array of devices that requires this speed. */
+ u32 devs[LAN969X_DSM_CAL_DEVS_PER_TAXI];
+
+ /* Number of slots required for one device running this speed. */
+ u32 n_slots;
+
+ /* Gap between two slots for one device running this speed. */
+ u32 gap;
+};
+
+static u32
+lan969x_taxi_ports[LAN969X_DSM_CAL_TAXIS][LAN969X_DSM_CAL_DEVS_PER_TAXI] = {
+ { 0, 4, 1, 2, 3, 5, 6, 7, 28, 29 },
+ { 8, 12, 9, 13, 10, 11, 14, 15, 99, 99 },
+ { 16, 20, 17, 21, 18, 19, 22, 23, 99, 99 },
+ { 24, 25, 99, 99, 99, 99, 99, 99, 99, 99 },
+ { 26, 27, 99, 99, 99, 99, 99, 99, 99, 99 }
+};
+
+static int lan969x_dsm_cal_idx_get(u32 *calendar, u32 cal_len, u32 *cal_idx)
+{
+ if (*cal_idx >= cal_len)
+ return -EINVAL;
+
+ do {
+ if (calendar[*cal_idx] == SPX5_DSM_CAL_EMPTY)
+ return 0;
+
+ (*cal_idx)++;
+ } while (*cal_idx < cal_len);
+
+ return -ENOENT;
+}
+
+static enum lan969x_dsm_cal_dev lan969x_dsm_cal_get_dev(int speed)
+{
+ return (speed == 10000 ? DSM_CAL_DEV_10G :
+ speed == 5000 ? DSM_CAL_DEV_5G :
+ speed == 2500 ? DSM_CAL_DEV_2G5 :
+ DSM_CAL_DEV_OTHER);
+}
+
+static int lan969x_dsm_cal_get_speed(enum lan969x_dsm_cal_dev dev)
+{
+ return (dev == DSM_CAL_DEV_10G ? 10000 :
+ dev == DSM_CAL_DEV_5G ? 5000 :
+ dev == DSM_CAL_DEV_2G5 ? 2500 :
+ 1000);
+}
+
+int lan969x_dsm_calendar_calc(struct sparx5 *sparx5, u32 taxi,
+ struct sparx5_calendar_data *data)
+{
+ struct lan969x_dsm_cal_dev_speed dev_speeds[DSM_CAL_DEV_MAX] = {};
+ u32 cal_len, n_slots, taxi_bw, n_devs = 0, required_bw = 0;
+ struct lan969x_dsm_cal_dev_speed *speed;
+ int err;
+
+ /* Maximum bandwidth for this taxi */
+ taxi_bw = (128 * 1000000) / sparx5_clk_period(sparx5->coreclock);
+
+ memcpy(data->taxi_ports, &lan969x_taxi_ports[taxi],
+ LAN969X_DSM_CAL_DEVS_PER_TAXI * sizeof(u32));
+
+ for (int i = 0; i < LAN969X_DSM_CAL_DEVS_PER_TAXI; i++) {
+ u32 portno = data->taxi_ports[i];
+ enum sparx5_cal_bw bw;
+
+ bw = sparx5_get_port_cal_speed(sparx5, portno);
+
+ if (portno < sparx5->data->consts->n_ports_all)
+ data->taxi_speeds[i] = sparx5_cal_speed_to_value(bw);
+ else
+ data->taxi_speeds[i] = 0;
+ }
+
+ /* Determine the different port types (10G, 5G, 2.5G, <= 1G) in the
+ * this taxi map.
+ */
+ for (int i = 0; i < LAN969X_DSM_CAL_DEVS_PER_TAXI; i++) {
+ u32 taxi_speed = data->taxi_speeds[i];
+ enum lan969x_dsm_cal_dev dev;
+
+ if (taxi_speed == 0)
+ continue;
+
+ required_bw += taxi_speed;
+
+ dev = lan969x_dsm_cal_get_dev(taxi_speed);
+ speed = &dev_speeds[dev];
+ speed->devs[speed->n_devs++] = i;
+ n_devs++;
+ }
+
+ if (required_bw > taxi_bw) {
+ pr_err("Required bandwidth: %u is higher than total taxi bandwidth: %u",
+ required_bw, taxi_bw);
+ return -EINVAL;
+ }
+
+ if (n_devs == 0) {
+ data->schedule[0] = SPX5_DSM_CAL_EMPTY;
+ return 0;
+ }
+
+ cal_len = n_devs;
+
+ /* Search for a calendar length that fits all active devices. */
+ while (cal_len < SPX5_DSM_CAL_LEN) {
+ u32 bw_per_slot = taxi_bw / cal_len;
+
+ n_slots = 0;
+
+ for (int i = 0; i < DSM_CAL_DEV_MAX; i++) {
+ speed = &dev_speeds[i];
+
+ if (speed->n_devs == 0)
+ continue;
+
+ required_bw = lan969x_dsm_cal_get_speed(i);
+ speed->n_slots = DIV_ROUND_UP(required_bw, bw_per_slot);
+
+ if (speed->n_slots)
+ speed->gap = DIV_ROUND_UP(cal_len,
+ speed->n_slots);
+ else
+ speed->gap = 0;
+
+ n_slots += speed->n_slots * speed->n_devs;
+ }
+
+ if (n_slots <= cal_len)
+ break; /* Found a suitable calendar length. */
+
+ /* Not good enough yet. */
+ cal_len = n_slots;
+ }
+
+ if (cal_len > SPX5_DSM_CAL_LEN) {
+ pr_err("Invalid length: %u for taxi: %u", cal_len, taxi);
+ return -EINVAL;
+ }
+
+ for (u32 i = 0; i < SPX5_DSM_CAL_LEN; i++)
+ data->schedule[i] = SPX5_DSM_CAL_EMPTY;
+
+ /* Place the remaining devices */
+ for (u32 i = 0; i < DSM_CAL_DEV_MAX; i++) {
+ speed = &dev_speeds[i];
+ for (u32 dev = 0; dev < speed->n_devs; dev++) {
+ u32 idx = 0;
+
+ for (n_slots = 0; n_slots < speed->n_slots; n_slots++) {
+ err = lan969x_dsm_cal_idx_get(data->schedule,
+ cal_len, &idx);
+ if (err)
+ return err;
+ data->schedule[idx] = speed->devs[dev];
+ idx += speed->gap;
+ }
+ }
+ }
+
+ return 0;
+}
@@ -15,7 +15,6 @@
#define SPX5_CALBITS_PER_PORT 3 /* Bit per port in calendar register */
/* DSM calendar information */
-#define SPX5_DSM_CAL_EMPTY 0xFFFF
#define SPX5_DSM_CAL_TAXIS 8
#define SPX5_DSM_CAL_BW_LOSS 553
@@ -74,18 +73,6 @@ static u32 sparx5_target_bandwidth(struct sparx5 *sparx5)
}
}
-/* This is used in calendar configuration */
-enum sparx5_cal_bw {
- SPX5_CAL_SPEED_NONE = 0,
- SPX5_CAL_SPEED_1G = 1,
- SPX5_CAL_SPEED_2G5 = 2,
- SPX5_CAL_SPEED_5G = 3,
- SPX5_CAL_SPEED_10G = 4,
- SPX5_CAL_SPEED_25G = 5,
- SPX5_CAL_SPEED_0G5 = 6,
- SPX5_CAL_SPEED_12G5 = 7
-};
-
static u32 sparx5_clk_to_bandwidth(enum sparx5_core_clockfreq cclock)
{
switch (cclock) {
@@ -98,7 +85,7 @@ static u32 sparx5_clk_to_bandwidth(enum sparx5_core_clockfreq cclock)
return 0;
}
-static u32 sparx5_cal_speed_to_value(enum sparx5_cal_bw speed)
+u32 sparx5_cal_speed_to_value(enum sparx5_cal_bw speed)
{
switch (speed) {
case SPX5_CAL_SPEED_1G: return 1000;
@@ -111,6 +98,7 @@ static u32 sparx5_cal_speed_to_value(enum sparx5_cal_bw speed)
default: return 0;
}
}
+EXPORT_SYMBOL_GPL(sparx5_cal_speed_to_value);
static u32 sparx5_bandwidth_to_calendar(u32 bw)
{
@@ -128,8 +116,7 @@ static u32 sparx5_bandwidth_to_calendar(u32 bw)
}
}
-static enum sparx5_cal_bw sparx5_get_port_cal_speed(struct sparx5 *sparx5,
- u32 portno)
+enum sparx5_cal_bw sparx5_get_port_cal_speed(struct sparx5 *sparx5, u32 portno)
{
struct sparx5_port *port;
@@ -163,6 +150,7 @@ static enum sparx5_cal_bw sparx5_get_port_cal_speed(struct sparx5 *sparx5,
return SPX5_CAL_SPEED_NONE;
return sparx5_bandwidth_to_calendar(port->conf.bandwidth);
}
+EXPORT_SYMBOL_GPL(sparx5_get_port_cal_speed);
/* Auto configure the QSYS calendar based on port configuration */
int sparx5_config_auto_calendar(struct sparx5 *sparx5)
@@ -63,6 +63,18 @@ enum sparx5_vlan_port_type {
SPX5_VLAN_PORT_TYPE_S_CUSTOM /* S-port using custom type */
};
+/* This is used in calendar configuration */
+enum sparx5_cal_bw {
+ SPX5_CAL_SPEED_NONE = 0,
+ SPX5_CAL_SPEED_1G = 1,
+ SPX5_CAL_SPEED_2G5 = 2,
+ SPX5_CAL_SPEED_5G = 3,
+ SPX5_CAL_SPEED_10G = 4,
+ SPX5_CAL_SPEED_25G = 5,
+ SPX5_CAL_SPEED_0G5 = 6,
+ SPX5_CAL_SPEED_12G5 = 7
+};
+
#define SPX5_PORTS 65
#define SPX5_PORTS_ALL 70 /* Total number of ports */
@@ -113,6 +125,7 @@ enum sparx5_vlan_port_type {
#define SPX5_DSM_CAL_LEN 64
#define SPX5_DSM_CAL_MAX_DEVS_PER_TAXI 13
+#define SPX5_DSM_CAL_EMPTY 0xFFFF
#define SPARX5_MAX_PTP_ID 512
@@ -454,6 +467,8 @@ int sparx5_config_auto_calendar(struct sparx5 *sparx5);
int sparx5_config_dsm_calendar(struct sparx5 *sparx5);
int sparx5_dsm_calendar_calc(struct sparx5 *sparx5, u32 taxi,
struct sparx5_calendar_data *data);
+u32 sparx5_cal_speed_to_value(enum sparx5_cal_bw speed);
+enum sparx5_cal_bw sparx5_get_port_cal_speed(struct sparx5 *sparx5, u32 portno);
/* sparx5_ethtool.c */