@@ -637,6 +637,15 @@ attribute-sets:
-
name: tx-err
type: uint
+ -
+ name: ts-hwtstamp-provider
+ attributes:
+ -
+ name: index
+ type: u32
+ -
+ name: qualifier
+ type: u32
-
name: tsinfo
attributes:
@@ -663,6 +672,10 @@ attribute-sets:
name: stats
type: nest
nested-attributes: ts-stat
+ -
+ name: hwtstamp-provider
+ type: nest
+ nested-attributes: ts-hwtstamp-provider
-
name: cable-result
attributes:
@@ -1137,6 +1150,28 @@ attribute-sets:
-
name: downstream-sfp-name
type: string
+ -
+ name: tsconfig
+ attributes:
+ -
+ name: header
+ type: nest
+ nested-attributes: header
+ -
+ name: hwtstamp-provider
+ type: nest
+ nested-attributes: ts-hwtstamp-provider
+ -
+ name: tx-types
+ type: nest
+ nested-attributes: bitset
+ -
+ name: rx-filters
+ type: nest
+ nested-attributes: bitset
+ -
+ name: hwtstamp-flags
+ type: u32
operations:
enum-model: directional
@@ -1578,6 +1613,7 @@ operations:
request:
attributes:
- header
+ - hwtstamp-provider
reply:
attributes:
- header
@@ -1586,6 +1622,7 @@ operations:
- rx-filters
- phc-index
- stats
+ - hwtstamp-provider
dump: *tsinfo-get-op
-
name: cable-test-act
@@ -1960,3 +1997,36 @@ operations:
name: phy-ntf
doc: Notification for change in PHY devices.
notify: phy-get
+ -
+ name: tsconfig-get
+ doc: Get hwtstamp config.
+
+ attribute-set: tsconfig
+
+ do: &tsconfig-get-op
+ request:
+ attributes:
+ - header
+ reply:
+ attributes: &tsconfig
+ - header
+ - hwtstamp-provider
+ - tx-types
+ - rx-filters
+ - hwtstamp-flags
+ dump: *tsconfig-get-op
+ -
+ name: tsconfig-set
+ doc: Set hwtstamp config.
+
+ attribute-set: tsconfig
+
+ do:
+ request:
+ attributes: *tsconfig
+ reply:
+ attributes: *tsconfig
+ -
+ name: tsconfig-ntf
+ doc: Notification for change in tsconfig configuration.
+ notify: tsconfig-get
Add new attributed to tsinfo allowing to get the tsinfo from a phc provider (composed by a phc index and a phc qualifier) on a netdevice's link. Add simultaneously a tsconfig command to be able to get and set hwtstamp configuration for a specified phc provider. Here is few examples: ./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --dump tsinfo-get --json '{"header":{"dev-name":"eth0"}}' [{'header': {'dev-index': 3, 'dev-name': 'eth0'}, 'hwtst-provider': {'index': 0, 'qualifier': 0}, 'phc-index': 0, 'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'}, {'index': 2, 'name': 'some'}]}, 'nomask': True, 'size': 16}, 'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'}, {'index': 2, 'name': 'hardware-receive'}, {'index': 6, 'name': 'hardware-raw-clock'}]}, 'nomask': True, 'size': 17}, 'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'}, {'index': 1, 'name': 'on'}]}, 'nomask': True, 'size': 4}}, {'header': {'dev-index': 3, 'dev-name': 'eth0'}, 'hwtst-provider': {'index': 2, 'qualifier': 0}, 'phc-index': 2, 'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'}, {'index': 1, 'name': 'all'}]}, 'nomask': True, 'size': 16}, 'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'}, {'index': 1, 'name': 'software-transmit'}, {'index': 2, 'name': 'hardware-receive'}, {'index': 3, 'name': 'software-receive'}, {'index': 4, 'name': 'software-system-clock'}, {'index': 6, 'name': 'hardware-raw-clock'}]}, 'nomask': True, 'size': 17}, 'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'}, {'index': 1, 'name': 'on'}, {'index': 2, 'name': 'onestep-sync'}]}, 'nomask': True, 'size': 4}}] ./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsinfo-get --json '{"header":{"dev-name":"eth0"}, "hwtst-provider":{"index":0, "qualifier":0 } }' {'header': {'dev-index': 3, 'dev-name': 'eth0'}, 'hwtst-provider': {'index': 0, 'qualifier': 0}, 'phc-index': 0, 'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'}, {'index': 2, 'name': 'some'}]}, 'nomask': True, 'size': 16}, 'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'}, {'index': 2, 'name': 'hardware-receive'}, {'index': 6, 'name': 'hardware-raw-clock'}]}, 'nomask': True, 'size': 17}, 'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'}, {'index': 1, 'name': 'on'}]}, 'nomask': True, 'size': 4}} ./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsinfo-set --json '{"header":{"dev-name":"eth0"}, "hwtst-provider":{"index":2, "qualifier":0}}' None ./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsconfig-get --json '{"header":{"dev-name":"eth0"}}' {'header': {'dev-index': 3, 'dev-name': 'eth0'}, 'hwtstamp-flags': 1, 'hwtstamp-provider': {'index': 1, 'qualifier': 0}, 'rx-filters': {'bits': {'bit': [{'index': 12, 'name': 'ptpv2-event'}]}, 'nomask': True, 'size': 16}, 'tx-types': {'bits': {'bit': [{'index': 1, 'name': 'on'}]}, 'nomask': True, 'size': 4}} ./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsconfig-set --json '{"header":{"dev-name":"eth0"}, "hwtstamp-provider":{"index":1, "qualifier":0 }, "rx-filters":{"bits": {"bit": {"name":"ptpv2-l4-event"}}, "nomask": 1}, "tx-types":{"bits": {"bit": {"name":"on"}}, "nomask": 1}}' {'header': {'dev-index': 3, 'dev-name': 'eth0'}, 'hwtstamp-flags': 1, 'hwtstamp-provider': {'index': 1, 'qualifier': 0}, 'rx-filters': {'bits': {'bit': [{'index': 12, 'name': 'ptpv2-event'}]}, 'nomask': True, 'size': 16}, 'tx-types': {'bits': {'bit': [{'index': 1, 'name': 'on'}]}, 'nomask': True, 'size': 4}} Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> --- Changes in v8: - New patch Changes in v10: - Add ghwtstamp attributes - Add tsinfo ntf command Changes in v11: - Add examples in the commit message. Changes in v13: - Replace shorter name by real name. - Fix an issue reported by "make -C tools/net/ynl" on the namings. Changes in v16: - Move to tsconfig command to get and set hwtstamp configuration. Changes in v18: - Add a tsconfig-set reply command description --- Documentation/netlink/specs/ethtool.yaml | 70 ++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+)