@@ -20,6 +20,11 @@ typedef u8 uprobe_opcode_t;
#define UPROBE_SWBP_INSN 0xcc
#define UPROBE_SWBP_INSN_SIZE 1
+enum {
+ ARCH_UPROBE_FLAG_CAN_OPTIMIZE = 0,
+ ARCH_UPROBE_FLAG_OPTIMIZED = 1,
+};
+
struct uprobe_xol_ops;
struct arch_uprobe {
@@ -45,6 +50,8 @@ struct arch_uprobe {
u8 ilen;
} push;
};
+
+ unsigned long flags;
};
struct arch_uprobe_task {
@@ -18,6 +18,7 @@
#include <asm/processor.h>
#include <asm/insn.h>
#include <asm/mmu_context.h>
+#include <asm/nops.h>
/* Post-execution fixups. */
@@ -877,6 +878,33 @@ static const struct uprobe_xol_ops push_xol_ops = {
.emulate = push_emulate_op,
};
+static int is_nop5_insns(uprobe_opcode_t *insn)
+{
+ return !memcmp(insn, x86_nops[5], 5);
+}
+
+static int is_call_insns(uprobe_opcode_t *insn)
+{
+ return *insn == 0xe8;
+}
+
+static void relative_insn(void *dest, void *from, void *to, u8 op)
+{
+ struct __arch_relative_insn {
+ u8 op;
+ s32 raddr;
+ } __packed *insn;
+
+ insn = (struct __arch_relative_insn *)dest;
+ insn->raddr = (s32)((long)(to) - ((long)(from) + 5));
+ insn->op = op;
+}
+
+static void relative_call(void *dest, void *from, void *to)
+{
+ relative_insn(dest, from, to, CALL_INSN_OPCODE);
+}
+
/* Returns -ENOSYS if branch_xol_ops doesn't handle this insn */
static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
{
@@ -896,6 +924,10 @@ static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
break;
case 0x0f:
+ if (is_nop5_insns((uprobe_opcode_t *) &auprobe->insn)) {
+ set_bit(ARCH_UPROBE_FLAG_CAN_OPTIMIZE, &auprobe->flags);
+ break;
+ }
if (insn->opcode.nbytes != 2)
return -ENOSYS;
/*
@@ -1267,3 +1299,101 @@ bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
else
return regs->sp <= ret->stack;
}
+
+int arch_uprobe_verify_opcode(struct page *page, unsigned long vaddr,
+ uprobe_opcode_t *new_opcode, void *opt)
+{
+ if (opt) {
+ uprobe_opcode_t old_opcode[5];
+ bool is_call;
+
+ uprobe_copy_from_page(page, vaddr, (uprobe_opcode_t *) &old_opcode, 5);
+ is_call = is_call_insns((uprobe_opcode_t *) &old_opcode);
+
+ if (is_call_insns(new_opcode)) {
+ if (is_call) /* register: already installed? */
+ return 0;
+ } else {
+ if (!is_call) /* unregister: was it changed by us? */
+ return 0;
+ }
+
+ return 1;
+ }
+
+ return uprobe_verify_opcode(page, vaddr, new_opcode);
+}
+
+bool arch_uprobe_is_register(uprobe_opcode_t *insn, int len, void *data)
+{
+ return data ? len == 5 && is_call_insns(insn) : is_swbp_insn(insn);
+}
+
+static void __arch_uprobe_optimize(struct arch_uprobe *auprobe, struct mm_struct *mm,
+ unsigned long vaddr)
+{
+ struct tramp_area *area = NULL;
+ char call[5];
+
+ /* We can't do cross page atomic writes yet. */
+ if (PAGE_SIZE - (vaddr & ~PAGE_MASK) < 5)
+ goto fail;
+
+ area = get_tramp_area(vaddr);
+ if (!area)
+ goto fail;
+
+ relative_call(call, (void *) vaddr, (void *) area->vaddr);
+ if (uprobe_write_opcode(auprobe, mm, vaddr, call, 5, (void *) 1))
+ goto fail;
+
+ set_bit(ARCH_UPROBE_FLAG_OPTIMIZED, &auprobe->flags);
+ return;
+
+fail:
+ /* Once we fail we never try again. */
+ put_tramp_area(area);
+ clear_bit(ARCH_UPROBE_FLAG_CAN_OPTIMIZE, &auprobe->flags);
+}
+
+static bool should_optimize(struct arch_uprobe *auprobe)
+{
+ if (!test_bit(ARCH_UPROBE_FLAG_CAN_OPTIMIZE, &auprobe->flags))
+ return false;
+ if (test_bit(ARCH_UPROBE_FLAG_OPTIMIZED, &auprobe->flags))
+ return false;
+ return true;
+}
+
+void arch_uprobe_optimize(struct arch_uprobe *auprobe, unsigned long vaddr)
+{
+ struct mm_struct *mm = current->mm;
+
+ if (!should_optimize(auprobe))
+ return;
+
+ mmap_write_lock(mm);
+ if (should_optimize(auprobe))
+ __arch_uprobe_optimize(auprobe, mm, vaddr);
+ mmap_write_unlock(mm);
+}
+
+int set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
+{
+ uprobe_opcode_t *insn = (uprobe_opcode_t *) auprobe->insn;
+
+ if (test_bit(ARCH_UPROBE_FLAG_OPTIMIZED, &auprobe->flags))
+ return uprobe_write_opcode(auprobe, mm, vaddr, insn, 5, (void *) 1);
+
+ return uprobe_write_opcode(auprobe, mm, vaddr, insn, UPROBE_SWBP_INSN_SIZE, NULL);
+}
+
+bool arch_uprobe_is_callable(unsigned long vtramp, unsigned long vaddr)
+{
+ unsigned long delta;
+
+ /* call instructions size */
+ vaddr += 5;
+ delta = vaddr < vtramp ? vtramp - vaddr : vaddr - vtramp;
+ return delta < 0xffffffff;
+}
@@ -233,6 +233,7 @@ void put_tramp_area(struct tramp_area *area);
bool arch_uprobe_is_callable(unsigned long vtramp, unsigned long vaddr);
extern void *arch_uprobe_trampoline(unsigned long *psize);
extern void handle_syscall_uprobe(struct pt_regs *regs, unsigned long bp_vaddr);
+extern void arch_uprobe_optimize(struct arch_uprobe *auprobe, unsigned long vaddr);
#else /* !CONFIG_UPROBES */
struct uprobes_state {
};
@@ -2759,6 +2759,9 @@ static void handle_swbp(struct pt_regs *regs)
handler_chain(uprobe, regs);
+ /* Try to optimize after first hit. */
+ arch_uprobe_optimize(&uprobe->arch, bp_vaddr);
+
if (arch_uprobe_skip_sstep(&uprobe->arch, regs))
goto out;
Putting together all the previously added pieces to support optimized uprobes on top of 5-byte nop instruction. The current uprobe execution goes through following: - installs breakpoint instruction over original instruction - exception handler hit and calls related uprobe consumers - and either simulates original instruction or does out of line single step execution of it - returns to user space The optimized uprobe path - checks the original instruction is 5-byte nop (plus other checks) - adds (or uses existing) user space trampoline and overwrites original instruction (5-byte nop) with call to user space trampoline - the user space trampoline executes uprobe syscall that calls related uprobe consumers - trampoline returns back to next instruction This approach won't speed up all uprobes as it's limited to using nop5 as original instruction, but we could use nop5 as USDT probe instruction (which uses single byte nop ATM) and speed up the USDT probes. This patch overloads related arch functions in uprobe_write_opcode and set_orig_insn so they can install call instruction if needed. The arch_uprobe_optimize triggers the uprobe optimization and is called after first uprobe hit. I originally had it called on uprobe installation but then it clashed with elf loader, because the user space trampoline was added in a place where loader might need to put elf segments, so I decided to do it after first uprobe hit when loading is done. TODO release uprobe trampoline when it's no longer needed.. we might need to stop all cpus to make sure no user space thread is in the trampoline.. or we might just keep it, because there's just one 4GB memory region? Signed-off-by: Jiri Olsa <jolsa@kernel.org> --- arch/x86/include/asm/uprobes.h | 7 ++ arch/x86/kernel/uprobes.c | 130 +++++++++++++++++++++++++++++++++ include/linux/uprobes.h | 1 + kernel/events/uprobes.c | 3 + 4 files changed, 141 insertions(+)